HT1296 Transfer data, help meee):

ok so i cracked my iphone and bought a new one, i had a password on the cracked one but cant put in the password to sync it. i have alot of photos and music. is there anyway else i can transfer my stuff?);

Since you already have a new iphone.
I suggest doing a google search in your area for iphone repair.
See if they can fix the screen, so you can back it up.
Good luck.

Similar Messages

Hi support please help me to sync my ipod and iphone 5 . Since i have installed new itunes version 12 , i am not able to sync to transfer data to my devices through itunes. I think there is some issue with tunes new version .kindly support ASAP. Ra

Hi support please help me to sync my ipod and iphone 5 . Since i have installed new itunes version 12 , i am not able to sync to transfer data to my devices through itunes.
I think there is some issue with tunes new version .kindly support ASAP.
Rachna khanna
[email protected]

you might need to buy a new cable from the apple store.

How can I transfer data (iTunes/iPhoto) MacBook Pro (Late 2011) to my brand new iMac 27" - Apple Support couldn't help me and did not make the promised call-back

I have a late 2011 MacBook Pro 13" and bought a brand new iMac 27" last week.
I tried to transfer data (musdic & photos) via Thunderbolt, but i did not run, my system always
tries to transfer data via WLAN, but that would last more than 80 hours.
I tried to get some help from the Apple Support, but unfortunately they couldn't help me.
A promised call-back from the next higher support-level has not been done.
Does anybody know what the problem might be.
The Thunderbolt-cable is brand new.

Instead of using Migration Assistant, the best way is to use the Target Disk Mode, so you will save headaches (Migration Assistant creates a new user with the transferred data).
To do this, just connect both Macs with the Thunderbolt cable, and then, start the MacBook Pro holding the T key, so a Thunderbolt or FireWire icon should appear on the display. After that, go to the iMac, open Finder, and the hard drive of the MacBook Pro will appear on the Finder sidebar as an external drive, under "Devices". Just access to it, go to the folders with your iTunes and iPhoto libraries, and copy them to the iMac

With the new TC 2TB transfer data with Wire the speed is only 20kb per minute, can anybody help

With the new TC 2TB transfer data with Wire the speed is only 20kb per minute, can anybody help ?
The fist Backup use for 260GB 15hours!
The Wifi ist Bridge configured.

We are still learning the quirks and bugs of this new box..
See the info here.. use accounts rather than disk or device password.. what happens.
https://discussions.apple.com/thread/5146963?tstart=0

I'm trying to transfer data (docs, emails) from G4 iMac running os 10.3.9 to brand new iMac on 10.8.1 I'm stuck, any help greatly appreciated. (Ethernet or wifi networking are both options if I can figure out how to get the machines to communicate.)

I'm trying to transfer data (docs, emails) from an old G4 iMac running OS 10.3.9 to brand new iMac on 10.8.1 I'm stuck, any help greatly appreciated. (Ethernet or wifi networking are both options if I can figure out how to get the machines to communicate.)

AMoriyama wrote:
I have the old machine backed up onto an external firewire disk but can't hook that up to the new imac as I'm waiting for delivery of a firewire 400/800 adaptor - therefore starting the old machine up as a slave is also subject to the same delay.
I was hoping there might be some way to create a network between the 2 machines (and 2 different versions of the OS) to be able to transfer data across immediately but perhaps I'll just have to wait for my firewire adaptor to arrive.
I don't understand why you're buying a Firewire adaptor, since AFAIK both of your computers have Firewire already built in.
All you need is a firewire cable. Connect the Firewire socket on the old machine to the Firewire socket on your new iMac.
Then start the old machine in Target Mode (i.e. by holding down the T key on its keyboard, while it's starting up, until you see the three-legged T icon hopping around the screen of the old machine.)
At that point you will also see a new icon on the screen of your new iMac. This is the hard drive of your old machine. By clicking on it you can navigate through it any way you like, just as you would normally.
Just drag across whatever you want from the old computer to the new one. This will leave everything on the old computer untouched.
- or use Migration Assistant but in my experience, Migration Assistant isn't very reliable and fails to migrate large amounts of stuff.

How can i stop transfer data to Trfc queue from a table datasource.help!!!

how can i stop transfer data to Trfc queue from a table datasource.
I create a incorrect view datasource in R3 with wrong join condition,it contain so large data,i want to stop it collect data to sm58.otherwise the system will be ...
i can't find helpful infrmation in sm50 .
in sm37 has a canceled job
Job Ln Job CreatedB Status Start date Start time Duration(sec.) Delay (sec.)
BIREQU_4EFQCFFUQL5ZOAWYOK2L0YCMF ALEREMOTE Canceled 2009-07-10 16:38:59 101,869 0
plesse help me 。

Hi,
You paste the job name in source system in
Tcode :Sm37
Job name as :BIREQU_4EFQCFFUQL5ZOAWYOK2L0YCMF
User:*
Go to job details and get the PID no ,on which application number it is runnug
GO to sm51 ,here you will find the application servers,Select the appriate app server go to that PID.
On left top most you will find option as cancel with out core ..
OR
Ask basics team do the same.
Regards,
Suman
Edited by: suman on Jul 13, 2009 12:56 PM

My ipod dose not open when I connect it to my laptop so I can not transfer any data to my laptop the ipod comes on with itunes so I can transfer data to the ipod can anyone help, I have re installed itunes

my ipod dose not open when I connect it to my laptop so I can not transfer any data to my laptop the ipod dose come on with itunes so I can transfer data to my ipod I have re installed itunes can any one help please, when I first got the ipod it did work ok

Try:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

I have just installed a 2 tera drive in additional drive bay I would like to use it as my starup or primary drive. Help... I need to transfer data...

I have installed a 2 tera bit drive in second drive bay. The starup drive is small. How do I transfer data and make new drive the startup or primary drive.. Thanks. In addition I will be pulling the small drive and installing a new larger drive a s back up. Also I need to initalize the new drive.. Wow.. O.K. I know that you are out there and can guide me. Merry Christmas to you all.. Many Thanks Dennis

I suggest you download either CCC or SuperDuper.
Then clone the current system disk to the new system disk.
Reboot from the new disk after the clone is complete.
If everything is running correctly, you can then erase the old system disk.
Allan

HT1296 how do we transfer data from i4 to i5 after sync to computer

how do i transfer data from i4 to i5 after sync to computer

iOS: Transferring information from your current iPhone, iPad, or iPod ...

How do i transfer data from one internal tabe to another.

Hi All,
         How do i transfer data from one internal tabe to another.
         Can i do it ebven if he tables are different in structure.
Please Advice.
Thanks in advance.

Hi Saket Tiwari,
I hope the earlier post by kashyap is good enough an answer. anywas in addition to it let me give a detailed
explanation of how you can populate an internal table.
1) Append data line by line.
     Syntax : APPEND [<wa> TO / INITIAL LINE TO] <itab>.
this appends new line to internal table <itab>.
2) Using COLLECT statement.
             COLLECT is another form of statement used for populating the internal tables. Generally COLLECT is used while inserting lines into an internal table with unique standard key. The syntax for COLLECT statement is as shown
     Syntax : COLLECT [<wa> INTO] <itab>.
3) Using INSERT statement
     Syntax INSERT [<wa> INTO / INITIAL LINE INTO] <itab> [index <idx>].
INSERT statement adds a line/work area to the internal table. You can specify the position at which the new line is to be added by using the INDEX clause with the INSERT statement.
Now coming to your request..
To append part or all of an internal table
     Syntax
              APPEND LINES OF <itab1> [FROM <n1>] [TO <n2>] TO <itab2>.
*     Note:
Without the FROM and TO options, this statement appends the entire table <itab1> to <itab2>.*
b) To insert part or all of an internal table into another internal table
     Syntax
          INSERT LINES OF <itab1> [FROM <n1>] [TO <n2>]
          INTO <itab2> [INDEX <idx>].
c) Using Move statement.
To copy entire contents of one table into another in one execution
     Syntax MOVE <itab1> To <itab2>.
               OR
          <itab1> = <itab2>.
but u hav to be careful because he contents of itab2 will eb overwritten on the execution of this statement.
These copy the contents of ITAB1 to ITAB2. Incase of internal tables with header line we have to use [] inorder to distinguish from work area. So, to copy contents of internal tables with header line the syntax becomes,
ITAB1[] = ITAB2[].
Coming to the letter part of your question, Yes, we can copy values between tables having different structures.
for this we use
                            MOVE-CORRESPONDING <itab1> TO <itab2>
    this executes the statement for their header lines. Searches for the sub-fields which occur both in itab1 and itab2 and then generates, for all relevant field pairs which correspond to the
        sub-fields ni , statements of the form MOVE itab1-ni TO itab2-ni. The other fields remain unchanged.
I hope the information provided has been of your help.
Reward if useful.
Regards,
Jose

How to transfer data from legacy system to SAP

Hi Friends,
I would like to know the process and the steps followed to transfer data from my legacy system to SAP.
Suppose if i have all the data in the form of Excel sheet or doc type. How can i transfer this data into SAP.
Please explain the steps followed.
Appreciate your help
Anil

Hi ,
Conversion of legacy data into SAP can be uploaded using a standard SAP Tool called LSMW ( TCode:LSMW).
the below link gives a brief explanation of the LSMW tool
http://tutorialsap.com/abap/sap-lsmw-tutorial-with-steps-to-create.html
There are various methods to upload data within LSMW. If the number of records are very high like Article Master or Conditions for Retail the IDOC method must be used.
Standard IDocs
1. Article Master - ARTMAS
2. Conditions - COND_A
3. Source list - SRCLST
4. Customer Master or WRF3/WRF6 tables - DEBMAS
5. Vendor master- CREMAS
Etc. Use transaction code WE60 to see the structure of each of the idocs. New enhancements can be done for the idocs if the required field is not available.
Regards
Prabhu

How can i transfer data from old MacBook Pro, which is too old to update time machine, to the newest MacBook Pro?

I recently bought a new MacBook Pro, and wanted to transfer all the data from my old MacBook Pro, but I get the message saying I need to update time machine on my old one in order to use time machine. However, my old one is too old to update. So I decided to use the cable to transfer, because I heard I can do it that way even though it could take time. But I have no idea what to do...
Can someone help me?

A Basic Guide for Migrating to Intel-Macs
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC System Preference add-ons
All Unsanity Haxies Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5 Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
OS X Lion: How to use Migration Assistant to transfer files from another Mac
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
Repair the hard drive and permissions using Disk Utility.
Backup your data. This is vitally important in case you make a mistake or there's some other problem.
Connect a Firewire cable between your old Mac and your new Intel Mac.
Startup your old Mac in Transferring files between two computers using FireWire.
Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.Revised 5/21/2011

HOW TO TRANSFER DATA FROM ONE INTERNAL TABLE TO ANOTHER

FOR PERTICULAR OBJECT ID ONE INT TABLE JTAB CONTAINS ONE RECORD(ROW) AND ANOTHER INT TABLE KTAB CONTAINS 3 RECORDS(ROWS). THEN HOW I SHOULD TRANSFER DATA FROM KTAB TO JTAB? WHAT R THE VARIOUS WAYS TO DO THAT. PLS HELP ME OUT. THANKS IN ADVANCE

Try something like
If you want one record per ktab :
LOOP AT jtab.
MOVE-CORRESPONDING jtab TO itab.
LOOP AT ktab WHERE id = jtab-id.
    MOVE-CORRESPONDING ktab TO itab.
    APPEND itab.
ENDLOOP.
ENDLOOP.
or
LOOP AT ktab.
READ TABLE jtab WITH KEY id = ktab-id. " binary implicit if sorted type
MOVE-CORRESPONDING jtab TO itab.
MOVE-CORRESPONDING ktab TO itab.
APPEND itab.
ENDLOOP.
If you want to sum ktab ratio into itab for each jtab
LOOP AT jtab.
MOVE-CORRESPONDING jtab TO itab.
LOOP AT ktab WHERE id = jtab-id.
    ADD-CORRESPONDING ktab TO itab.
    APPEND itab.
ENDLOOP.
ENDLOOP.
Use sorted type table when LOOP AT WHERE, else SORT table is enough.
Regards

How to transfer data from one client to another client

Dear Experts,
Please explain how to transfer data (Materials) from one client to another client?
Thanks,
Ajay Kumar

Hi Ajay,
Check any of below methods
Refer thread http://scn.sap.com/thread/171981 where people use IDOCs for master data transfer.
OR
This is done by BASIS team, by client refresh or client copy. Check with your basis team for this and there is some predefined time when they plan this activity, and in most project they do it once in 3 months etc to get production environment in test system which helps to resolve issues of production by creating similar case in test system.
Check below threads for more information
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/cleint-copy-vs-client-refresh-1377848
http://basissap.blogspot.in/2008/05/what-is-client-copy.html
OR
You can download data from one client and upload in another through BDC or LSMW.
Regards,
Sharat

How to transfer DATA from one machine to another using DBlink

I want to transfer data from one machine to another both having oracle 8.0.5 with AIX operating system using DB link. CAn any one help me in this task

Step one - Create and test SQLNet connections between the databases.
Step two - Create at least on database like from one database to the other:
CREATE DATABASE LINK linkname
CONNECT TO user identified by password
USING 'tnsnamesentry';
Step three - use the dblink linkname in dml statements eg:
insert into emp@linkname
(select * from emp);

HT1296 Transfer data, help meee):

Similar Messages

Maybe you are looking for