HT1296 under My Computer using windows 7,  does not recognize the ipod touch

Whwen clicking on My Computer , IPOD  touch does not show up

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or              
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

Similar Messages

  • Windows 7 does not recognize my iPod touch 5--doesn't even charge the device. HELP!

    My computer at work will not recognize my iPod touch generation 5.  I've had increasing problems and now today when I plug it into the USB port, it will not recognize it.
    I've uninstalled all the Apple, iTunes etc. software and reinstalled, I've rebooted the computer 3-4 times.  I've uninstalled and reinstalled the USB driver.
    It will not work.  Ideas? 

    Did you do everything here:
    iOS: Device not recognized in iTunes for Windows
    Including
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

  • My windows 7 does not recognize my ipod touch 64gb 4th gen.

    My windows 7 os does not recognize my 64 gb ipod touch 4th gen. Why not? Please help me!!!!!!!

    Did you do this as I suggested in my first reply?
    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests

  • ITunes does not recognize my iPod Touch

    My iTunes does not recognize the iPod Touch , I connect to the computer and not loaded or recognized by the iTunes, I can do? and uninstall iTunes and went back to install, now I can do? Thanks.

    http://support.apple.com/kb/TS1538
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • Itunes does not recognize my iPod Touch using Windows 7 - 64bit

    Itunes does not recognize my iPod Touch using Windows 7 - 64bit. Is this a driver issue? Has anyone else had this problem? Is there a fix?
    Message was edited by: Mark DiGiacomo

    hi sally,
    see if this user tip by Yorkwill helps:
    +In the end what works is to just force the drivers on what windows thinks is a camera, i.e. to ‘update’ the device to use the correct driver. There are some hints on how to do this already listed on this forum, but I’ll try to give some more detailed information:+
    +1. First off you need to have iTunes installed and the ipod touch plugged in+
    +and recognized as ‘something’ e.g. digital camera (it shouldn’t really+
    +matter what it’s recognized as, but it needs to be found by windows).+
    +2. Search for usbaapl in the C:\WINDOWS system folder:+
    +o open windows explorer (e.g. Right-click Start and then click ‘explore’)+
    +o right-click the WINDOWS folder and select ‘Search’).+
    +o type in usbaapl and hit Search – try to ignore the dog!+
    +You should find the driver info in a sub folder of+
    +C:\WINDOWS\system32\DRVSTORE e.g. C:\WINDOWS\system32\DRVSTORE\usbaapl_A65621D65F5B7507DD7B22331826547BDD2D206B+
    +Remember that location (either leave the search box open or copy the folder+
    +name into note pad – you’ll need it later)+
    +If you don’t find usbaapl.sys, usbaapl.inf etc. then your drivers have not+
    +been installed with the iTunes install and you’ll have to reinstall iTunes.+
    +3. Locate the ipod-camera device:+
    +o Open the device manager, e.g. using Start > Control Panel >+
    +Performance and Maintenance > System > Hardware Tab > Device Manager+
    +o Look for a device called ‘ipod’ - if your ipod shows up as+
    +‘digital camera’ it will be under something like ‘imaging devices’.+
    +4. Update the driver:+
    +o Right click the ‘ipod-camera’ in device manager and click on+
    +‘Update Driver’ – the Hardware Update Wizard will open.+
    +o Check the ‘Install from a list or specific location’ then click ‘Next’+
    +o Check ‘Search for the best driver in these locations’. Un-check+
    +‘Search removable media’ and check ‘Include this location in the search’.+
    +In the text box below type (or better copy and paste) the folder+
    +containing the ipod driver information found in step 1 (in the example+
    +above it was C:\WINDOWS\system32\DRVSTORE\usbaapl_A65621D65F5B7507DD7B22331826547BDD2D206B), +
    +then click Next.+
    +You should now see something like ‘Apple ipod device driver’ or so. Continue+
    +installing that device. Once the driver has been installed the ipod will come+
    +to life and iTunes (if you have it open) will show it.+

  • I changed my apple id on my computer and my iPad does not recognize the new id

    I changed my Apple id on my computer and my ipad does not recognize the new id and continues to display the old id. How can I get it to change to the new id?

    Easy Fix: On your iPad, go into Settings>Mail,Contacts,Calendars and click on your hotmail account. Simply replace the password that's already there with your new one. Then, I recommend rebooting your iPad:
    To reboot your iPad, hold down the sleep/wake button and the home button simultaneously until the screen goes black and the Apple logo appears. If, during this process, a slider appears on the screen to power it off, ignore it and keep holding the buttons down.
    If you've already tried this, then the next step would be to delet your hotmail account from your iPad (also in Settings>Mail, Contacts, Calendars) and then reboot the iPad and add the account back again.

  • My IPOD froze while downloading the update of IOS 5 now I have a screen that has the blue itunes logo and the USB connector. when I connect to my computer it does not recognize the Ipod?

    My Ipod froze while downloading a software update from Itunes.. now I have a screen with an Itunes logo and the USB cord and my computer does not recognize the Ipod??

    See Here for,
    Device Not Recognised
    For PC
    http://support.apple.com/kb/TS1538
    For Mac
    http://support.apple.com/kb/ts1591
    And Here for,
    Unable to Update or Restore
    http://support.apple.com/kb/HT1808

  • Hi all, itunes does not recognize my ipod touch 5th gen but it does recognize my ipod touch 3rd gen.?

    Hi all,
    itunes does not recognize my ipod touch 5th gen but it does recognize my ipod touch 3rd gen.?
    Windows 7 home premium, 64 bit, itunes 10.7.0.21, ipod 5th gen ios 8.3. I know I am not running the latest version of itunes for the
    ipod touch 5 gen. but at least with itunes open I would get a message stating cannot connect this ipod because I am not running the
    lastest version of itunes. That message would come up everytime I was charging said ipod with itunes open. I just updated to iso 8.3
    and now I don't get that message anymore when I have itunes open.I tried turning off ipod/computer/restarting, nothing. I tried going
    to administrator/services/apple moble device and stop/start service nothing. Device manager shows the drivers are installed.
    Any info will be greatly appreciated, thanks.
    Fish

    Hi all,
    itunes does not recognize my ipod touch 5th gen but it does recognize my ipod touch 3rd gen.?
    Windows 7 home premium, 64 bit, itunes 10.7.0.21, ipod 5th gen ios 8.3. I know I am not running the latest version of itunes for the
    ipod touch 5 gen. but at least with itunes open I would get a message stating cannot connect this ipod because I am not running the
    lastest version of itunes. That message would come up everytime I was charging said ipod with itunes open. I just updated to iso 8.3
    and now I don't get that message anymore when I have itunes open.I tried turning off ipod/computer/restarting, nothing. I tried going
    to administrator/services/apple moble device and stop/start service nothing. Device manager shows the drivers are installed.
    Any info will be greatly appreciated, thanks.
    Fish

  • Windows 7 will not recognize the ipod.

    I have an ipod 4th touch 64 gig. Windows 7 will not recognize the ipod. It will make the noise of a connection and will only charge. It will not show in my computer as a hard drive. It will show in Itunes and other third party programs. I have searched the net and tried most of the advice to try and fix but will still not show as a hard drive.
    Has anyone had this problem and if so is there a fix?
    thanks

    I did read along the way about some of the ipods not being recognized as a HD. I just installed Iexplorer and looks like it will do the job. As long as I have something other than Itunes to see it as a HD. I use Syncios and Copy Trans and both work great as to transfer music. But to see the ipod as a HD iexplorer will do the Job.
    Again my ipod 4th gen will show in my computer but only the DCIM folder and a few other with pictures, no music folder or the control folder from the ipod.
    My ipad works great and another ipod the long thin ones work but not this ipod touch 4 gen 64 gig.
    Any other suggestions or help much appreciated
    thanks for the iexplorer it should help

  • Itunes does not recognizes my ipod touch?

    itunes does not recognizes my ipod touch and the message "MobileDeviceService has encountered a problem and needs to close.  We are sorry for the inconvenience." keeps popping up. i've tried everything but it still hasn't worked?

    It is normal and expected to be sceen as a camera.  See the following for iTunes:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • HT1296 My computer with Windows 8.1 will recognize my ipod touch but only sees the pictures not the music and it won't sync.

    I have an iPod Touch and when I connect it to my computer it shows up but when I select it only the pictues show up.  It does not recognize the music files on my iPod.

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with           
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • HT1751 My win8 pc hard drive failed.  After the hard drive was replaced, I copied iTunes Media backupfiles from external hard drive (Karen's Replicator was used).  ITunes does not recognize the back up files - help! (it does show cloud & recently burned m

    My win8 pc hard drive failed.  After the hard drive was replaced, I copied iTunes Media backupfiles from external hard drive (Karen's Replicator backup software was used).  ITunes does not recognize these back up files even though the location is the same as cloud & recently burned music that does show- help!  The backup files consist of 34,000+ songs; almost all burned from my own CD collection.  I do have most of the songs on an ipod classic but hesitate to try to restore from that.  Can someone tell me how to get these 34,000 songs to show up in iTunes?  Thanks!!

    This diagram shows how a typical iTunes library ought to be set out (click on it to enlarge)
    The red outline highlights the media folder and its contents, the various subfolders are only created if that kind of content is in your library. The right-hand side shows the files that should be found in the iTunes library folder; sentinel is normally hidden so may not be visible. The core of your iTunes library is the file iTunes Library.itl, you need to restore this, the other library files and the Album Artwork folder, as well as the media folder, to restore your library.
    tt2

  • HT1430 i have a red X in a circle which sometimes changes to the apple logo but no matter what instructions i try nothing else happens.  My computer nor i tunes does not recognise the ipod.

    I have a red X in a circle which sometimes changes to the apple logo but nothing else happens after i try every suggestion; Windows nor itunes does not recognise the ipod; what do you suggest?

    You could possibly try a restore from itunes or from the ipod itself, otherwise go get it looked at/replaced, that sounds like a software issue.

  • My pc windows vista home system and Windows Vista Ultimate both service pack 2 and itunes do not recognize the ipod touch 4g, ios 5

    my pc windows vista home system and wndows vista ultimate boht service pack 2 and itunes do not recognize or do not see the ipod touch 4g ios 5. why'??'

    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    We'd better check on that, kris. If you enable iTunes in your Windows firewall, does that help with your connection? See the following document for instructions:
    How to enable iTunes in the Windows XP Firewall
    EDIT: Drat ... gave you the link to the wrong document. Try this one instead for your Vista:
    How to enable iTunes in the Windows Vista and Windows 7 Firewall
    Message was edited by: b noir

  • My itunes does not recognize my ipod touch

    my itunes does not recognize my ipod touch

    iOS: Device not recognized in iTunes for Windows
    iOS: Device not recognized in iTunes for Mac OS X

Maybe you are looking for

  • SSO problem on Windows Mobile with WAS Java 7.0 and R/3 4.7

    We have a curious single sign-on problem with custom WM-app. The application is developed using WD Java and currently runs on WAS 7.0 SPS10. WAS makes calls to several RFC:s on 4.7 Enterprise and authentication is done using SSO. The enduser device i

  • Messaging: wipe out of previous messages

    I use iPhone 4S  my wife uses 5C both on IOS 8 I typed a text message on my phone to her and went to send it but simultaneously decided to delete it and write another message. It wiped out our previous conversations on my phone obviously BUT also app

  • Pls help: aci based on reference to other entries?

    Hello, We've question in defining ACI. Our users are students, who can enroll multiple study programmes. Thus our entries (simplified version) looks like following: For student: dn: uid=1234,dc=my,dc=domain objectclass: inetorgperson objectclass: stu

  • Help with first approach to Class and Constructor

    Hello guys I have a homework but I'm totally lost. Here is the assignment: **Write the fields, the constructor and the methods of the class below.** **public class HourlyEmployee** **The class has 4 private fields:** **private String name; // the nam

  • Error 10845 in VI Logger with NI 4350

    I have just installed VI Logger 2.0 full version for use with my NI 4350 USB box. I get an error in a simple analog read of 10845, Data could not be read from my devvice fast enough. Is there a wy to slow down the sampling or speed up the bus speed?