HT1310 unable to see CD/DVD during bootup

How do I reinstall the OS if the CD/DVD isn't seen during backup?

Hold down Alt/Option at Startup.
Wait for the screen to be drawn in slow motion with an Icon for each potentially-bootable Volume, including the DVD in the drive.
Select the DVD and Proceed.

Similar Messages

Unable to detect coreless keyboard during bootup

I have just updated my T60P's BIOS to 2.25. Now I could NOT use my coreless keyboard (LX710) to input the HDD password anymore. It seemed that the keyboard was NOT detected during bootup. But it worked fine after it finished bootup. What can I do to fix it? Your help is greatly appreciated.

it said that:
Executing LiveCycle PDFGenerator Acrobat Configuration Script.
Verifying LiveCycle ES2 location LiveCycle ES2 Location -- "C:\Adobe\Adobe LiveCycle ES2"
Finding Acrobat location Acrobat Pro Extended was not found to be installed on the machine.
Please install Acrobat Pro Extended and then run this configuration script.
PDFGenerator Acrobat Configuration Script execution completed.
which script is this ?

Unable to see preview photos during import

When importing RAW photos into Lightroom I get a message "Previews Unavailable For This File". If I shoot in JPeg the previews are there. When I import the photos they are imported. I have version 5.7 Lightroom. My camera is a Canon Rebel XT. How do I preview my photos before I import them into Lightroom? How do I see RAW files in the preview part of importing?

http://www.fcpbook.com/Audio3.html

Snow Leopard and Windows 7 - Unable to locate CD/DVD drivers to install

hi,
I am using Boot Camp to install Windows 7, and when the installation starts, I get an error message/ popup window that states: "Unable to locate CD/DVD drivers...".
I can't eject the CD, or figure out which drivers it needs, & how to get them.
I've noticed a lot of people are having this same issue with various PC manufacturers and various releases of Windows 7...
Some people have successfully avoided this by installing off of a USB drive. I am wondering if it's at all possible to install Windows 7 / Boot Camp with a USB drive... or if there is another solution to this problem.
thanks
ben

hi,
i'm replying again to my own question with more info
basically i inserted the snow leopard and the mac os x install dvd's that shipped with my early 2009 nehalem mac pro tower into a windows machine. i was able to "explore" the dvd using windows and found some boot camp support folders which contained drivers.
i copied these drivers to a thumb drive.
so now, during the windows 7 install... i have the option of navigating to these drivers on my thumb drive.
however - i don't see any potential drivers for the dvd burner/ superdrive...
here is the list of companies/ drivers supplied:
ATI
Broadcom
Marvell
Apple
Cirrus
MotorolaSetup.exe
Asix
IDT SigmaTel
NVidia
Atheros
Intel
RealTekSetup.exe
it is my understanding that the superdrive is hitachi...
the information on this drive inside the system profiler is as follows:
"HL-DT-ST DVD-RW GH41N:
Firmware Revision: PQ05
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: Insert media and refresh to show available burn speeds"
i really wish i knew more info about this drive and where to get windows drivers for it so i can install windows 7 on my mac pro.
this is the stock drive that shipped with this mac pro. i find it strange that no one else is running into this issue?
thanks
ben

Unable to see the deployed webservices in websevices list

In SAP EP System some of the APIs are not exposed to clients and those APIs needs to be called thru webservices (like get all Roles names from the SAP-EP system, add a role to user in SAP-EP system, Remove a ole from the User in SAP EP system, get all assigned Roles of a User in SAP EP system, get all users for a role in SAP-EP system, and get users for a group in SAP-EP system).
To achieve the above functionality, we have developed the portal (.par file) which will call the SAP EP APIs using web services.
We have developed a piece code (.par file) in net viewer Developer studio 2.0.9; we deployed /tested this .par file on to SAP EP6 SP2 successfully. Now, we need to test this .par file in SAP EP6 SP13 but we are not able to succeed in deploying this file like how we are doing it in SP2. After successful deployment of the PAR file we are unable to see the particular webservice in the webservices list.
For deploying the PAR file we followed the following navigation steps:
1.login into SAPEP as sapadmin.
2.click the systemadministrator tab.
3.click the support tab.
4. select the portalruntime link.
5.click on the AdministratorConsole link.
upload window will open where we upload the PAR file.
For checking the uploaded Webservices we followed the following navigation steps:
1.login into SAPEP as sapadmin.
2.click the systemadministrator tab.
3.click the support tab.
4. select the portalruntime link.
5.click on the soapadmin link.
In case of SP13, we are not able to see the uploaded webservices. But, when we deploy .par file it says deployed successfully (not throwing any errors).
Edited by: praveen bikumalla on Jan 21, 2008 7:38 AM

If we restart the services that is there in Systemconfiguration->servicesconfiguration->Applications i am getting the following error
Server 1337850:Error in the listener class com.sap.ip.portal.admin.portalanywhere.QueryHandler during the process of handleTopic.

When my z2 is locked unable to see notification icons

Hi all
when my z2 is locked I am unable to see notification icons, like missed calls, messages and emails. Please help me

Hi Andy1374, welcome to the community!
If you can't remember your passcode then you can do one of the following:
Run a software repair on the handset (this will delete all user data)
or Log into my Xperia (if you have previously set it up) > Locate the device > Press Lock > Enter code > now a different unlock box should appear on your screen > enter the code.
To run a software repair:
Download PC Companion or Bridge for Mac.
Running the software repair on PC Companion:
1. Install and open PC Companion then select Support Zone.
2. Phone Software Update.
3. Start.
4. Repair Phone
5. Continue
6. Accept data removal
7. Next
8. Wait for prepare
9. Select Phone
10. Follow the connection steps
Running the software repair on Bridge for Mac:
1. Launch Bridge for MAC without the handset connected.
2. On the Main Window select "Xperia > Repair Xperia
Device".
3. Ensure the phone is charged and select "Ok" in the
following window.
4. Select Continue on the following page.
5. Wait until the initialising step is finished the
continue as below.
6 . Select your model of phone from the list that appears
7. Follow the connection steps that appear, ensuring that
you are holding the relevant button down before during and
after the connection phase until the update/repair begins.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

I have an iMac for work and I am leaving the company. How do I clear the computer so that my soon to be former company is unable to see my personal information Ie. - internet, contacts, etc...

I have an iMac for work and I am leaving the company. How do I clear the computer so that my soon to be former company is unable to see my personal information Ie. - internet, contacts, etc...

Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
       A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
       B. Clone to an external drive using using Carbon Copy Cloner.
          1. Open Carbon Copy Cloner.
          2. Select the Source volume from the Select a source drop down menu on the left side.
          3. Select the Destination volume from the Select a destination drop down menu on the right
              side.
          4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
              sure to opt for that.
               Destination means a freshly erased external backup drive. Source means the internal
               startup drive.
Step Two - Prepare the machine for the new buyer:
          1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
          2, Remove any Open Firmware passwords or Firmware passwords.
          3. Turn the brightness full up and volume nearly so.
          4. Turn off File Vault, if enabled.
          5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
     A. Snow Leopard and earlier versions of OS X
          1. Insert the original OS X install CD/DVD that came with your computer.
          2. Restart the computer while holding down the C key to boot from the CD/DVD.
          3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
              Optionally, click on the Security button and set the Zero Data option to one-pass.
          4. Install OS X.
          5. Upon completion DO NOT restart the computer.
          6. Shutdown the computer.
     B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
         Note: You will need an active Internet connection. I suggest using Ethernet if possible because
                   it is three times faster than wireless.
          1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
              Utilities window appears.
          2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
          3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
              on the Erase tab in the DU main window.
          4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
              and set the Zero Data option to one-pass.
          5. Click on the Erase button and wait until the process has completed.
          6. Quit DU and return to the Mac OS X Utilities window.
          7. Select Reinstall Lion/Mountain Lion and click on the Install button.
          8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

5800 XpressMusic - V 50.0.005 - Unable to see all ...

I recently updated my phone 5800 XpressMusic to latest firmware V 50.0.005 (Customer Version 50.0.005.C03.01) but I am unable to see many changes. The only changes that I notice are - kinetic scrolling, change in the way browser displays the page and music library. Are these the only changes? Is there a way to check officially, what all changes, is this new firmware supposed to bring in?

there are many conflicting reports of whats new
here is some of them
1.Music player is cool... it has been completely changed with albumart mini view in all songs and album sections ... it is now like nokia n97 music player
2. Menu has kinetic scrolling
3. Quick office integrated
4. Hide option in music player in place of exit
5. Music player refreshes fast
6. New 1 touch dialling and call settings options in dialler
7. Camera quality is little improved
8. There is an option to uninstall quick office from phone too
9. Ovi sinc application added
10. Option for history list (on off) in web browser
11. Option to send webpage via message blutooth in webbrowser
12. Get rihanna link in webbrowser
13. Kinetic scrolling in webbrowser
14. Browser 7.2
15. Lifecasting (with Maps 3.0T SR3.0)
16. Flash Video Phase-3-Flashlite 3.1.7.x
17. Gimlet Touch 2.2
18. Enable Side lock Key functionality during Swipe UI (Calendar/Clock)
19. Windows 7 Device Stage Support
20. OVI store 1.5.6
21. Cherry v2.1
22. OVI contacts 1.50.8
23. Workaround for Niagara (SMD) display module for DFS52.50 based products
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Unable to see the "Password Reset" tab in Indentity Store (SAP IDM 7.1)

I am trying to implement Password self-service as per the document "SAP NewWeaver Idenitty Management Identity Center Self-service password reset Implementation Guide" Version 7.1 Rev 2. In this guide, references are made to the Password Reset Tab in the Identity Store properties view in Identity Center. I do not see that tab in my view.
I followed the standard inst guides during the upgrade. Its a fresh implementation and we are on IDM 7.1 SP5
I have checked out couple of similar posts where it was resolved by installing SP3/4, does anyone have any other solution than applying the SP again ??
What do I need to do to have that tab?
Thanks

Matt,
Ours is a fresh installation
According to the PSS 7.1 V2 guide, i completed the section 1 where i creted the UME roles and the
Section 1: Creating the tasks
Creating the folder for the tasks
Creating the password reset task
Creating the password reset failed task
Then started the Section 2 Configuring the identity store and the first point the document says is "Select the identity store in the console tree and choose the "Password reset" tab: " which i am unable to see the tab in my system.
I am i missing some config steps here ? again i am just goin line - by - line what the doc says
Thanks
Edited by: Chetan on May 23, 2011 4:43 PM

HP 7525 unable to see/connect to hidden secured SSD

I purchased a new HP 7525 All in one printer replacing an HP 7510 printer that recently died. I have updated the firmware of the printer and also am using the latest drivers from the HP website. I am installing on an iMac running 10.8.5.
During the installation procedure when configuring the wireless network (with the USB cable plugged in) the printer is unable to see my hidden network which operates at both 2 and 5 GHz and is secure via WPA2 passcode. Every other Mac, iPad, Apple TV and iPhone in our home uses this network (and have no connectivity issues). I have tried restarting the computer, printer and the router. I have reset the printer back to defaults. I have tried manually entering the network information directly into the printer (same unable to find error message). For those who do (rightfully) ask I am entering the SSID manually (since it is hidden) and am certain it is spelled and spaced properly.
The printer is able to successfully connect to my guest network with no security - that's not what I want though and doesn't suit our needs. Any help or direction is greatly appreciated before I decide to return and find an alternative product. Thank you very much and have a fantastic day.

Hi,
No, it can't see 5GHz networks, it can only see 2.4GHz networks and it supports:
Wireless network: 802.11b, 802.11g, and 802.11n supported.
as shown in the following specs:
http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_rule=58988&tmp_task=prodinfoCategory&cc=u...
You can get your router to broacast BOTH bands and this will be ok. (I'm using the same)
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Elements 10. Unable to backup to DVD

Trying to backup photos onto DVD but Elements does not see my DVD recorder, and will only backup to my hard drive (C) it does not even show any other destination.
Using Windows XP. trying to record to ASUS DVD recorder, did not have this problem Elements 6.

Reinstalled Elements and it now can now see all my drives.
Thanks for your help
Message Received: Feb 17 2012, 12:41 AM
From: "Brett N"
To: "PEROCC"
Cc:
Subject: Elements 10. Unable to backup to DVD
Re: Elements 10. Unable to backup to DVD created by Brett N in Photoshop Elements - View the full discussion
We need to check that the drive has been enabled to burn with Adobe software. Open the Registry Editor (regedit.exe) and navigate here:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E3 25-11CE-BFC1-08002BE10318}
Look for LowerFilters. Verify that it has PxHelp20 listed as a value. If it doesn't, you may need to reinstall Photoshop Elements. If it is there with something else, then the mostly likely cause of the issue is another software is conflicting with Elements. You may have to uninstall other disk burning software to allow Elements to work.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4212001#4212001
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4212001#4212001. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Unable to see local variable values when debugging java

Hi,
I am using JDev 10.1.2 with java version 1.4.2_04.
I have been using JDev to debug my java programs. But suddenly from this morning I am unable to see local variable values. I am able to see class and instance variables. This has happened to me before and I had restarted my machine couple of time, to get this sorted. But this time, nothing helps. Going thru the forum I found out that Include Debug information (Project Properties -> Compiler Option) need to be turned ON. It is already turned ON for me.
I would greatly appreciate if you could let me know how to crack this problem.
Thanks in advance.

No. The local variables 'used' to show up during debugging. But erratically it doesn't show up local variable values. I had to restart my machine couple of times whenever this happens, inorder to see the local variable values. But this time even restarting doesn't help.
Is there any preference setup that need to be turned on/off to see local variables?
Also I can't step into a static method now. Any idea why this happens?

P7N Diamond, unable to access RAID Config during Boot

I've got a P7N Diamond motherboard, with 6 disks attached, one SSD (boot) and I recently installed 5 1.5TB disks as well. These I would like to run in RAID 5 mode. I've enabled RAID for those channels in the BIOS, but I am unable to access the RAID config that's supposed to be available during bootup. The system also has an ADAPTEC RAID 1430SA ROHS SINGLE PCI-E LP 4-PORT controller with two disks attached, could this be messing things up? (I DO get an option to access this RAID config, but it fails claiming too little free memory (!) (It's a system with 4GB installed)) In Windows 7, the 5 disks shows up in the NV Raid as "Free disks", but I'm not able to do anything with them except setting SMART info. In the Windows Disk management they don't show up at all.
So, anyone got any ideas on how to access the raid config (F10) during boot?
All suggestions appreciated
Thanks,
Zem

The error regarding "too little free memory" isn't related to system RAM but to bios ROM address space. As already stated, the Adaptec card is causing the conflict with the NV RAID controller bios. This is actually a very common issue when trying to run multiple disk controllers in a single system and isn't any fault of the mobo. There's only so much addressable space for BIOS to reside in.
You may be able to free up some address space by disabling the LAN Option (boot) ROM in CMOS and setting the JMicron controller to IDE instead of RAID. Even better would be to disable the JMicron controller entirely.
If, after doing so, the Adaptec controller is still not able to work with the NV controller in RAID mode, then I'm afraid you're out of luck.

Unable to see interface on ASA 5510 Firewall

Hi All,
I am unable to see 4th interface on my firewall i.e fastether0/3 on my firewall ASA 5510.
Below is the output.
ciscoasa# sh int ip br
Interface                  IP-Address      OK? Method Status                Protocol
Ethernet0/0                x.x.x.x           YES CONFIG up                    up
Ethernet0/1                x.x.x.x           YES CONFIG up                    up
Ethernet0/2                unassigned      YES unset administratively down down
Internal-Control0/0        127.0.1.1       YES unset up                    up
Internal-Data0/0           unassigned      YES unset up                    up
Management0/0              192.168.1.1     YES CONFIG up                    up
Please suggest what could be the reason.
Regards
Pankaj

Hi Ramraj,
Even i have the base license for my ASA 5510 which is showing all the 4 interfaces in sh ver. I don't think so license would be an issue. There should be some IOS code bug that needs to be upgraded. If this goes for an OS upgrade it should get resolved.
Its not showing up in sh ver . As Karsten said he might be running on old IOS version.
fy-a# sh ver
Cisco Adaptive Security Appliance Software Version 8.4(4)1
Device Manager Version 6.4(5)
Compiled on Thu 14-Jun-12 11:20 by builders
System image file is "disk0:/asa844-1-k8.bin"
Config file at boot was "startup-config"
fy-a up 1 day 1 hour
Hardware:   ASA5510, 1024 MB RAM, CPU Pentium 4 Celeron 1600 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW016 @ 0xfff00000, 2048KB
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
                             Boot microcode   : CN1000-MC-BOOT-2.00
                             SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
                             IPSec microcode : CNlite-MC-IPSECm-MAIN-2.06
                             Number of accelerators: 1
0: Ext: Ethernet0/0         : address is 2c54.2d0c.8f1a, irq 9
1: Ext: Ethernet0/1         : address is 2c54.2d0c.8f1b, irq 9
2: Ext: Ethernet0/2         : address is 2c54.2d0c.8f1c, irq 9
3: Ext: Ethernet0/3         : address is 2c54.2d0c.8f1d, irq 9
4: Ext: Management0/0       : address is 2c54.2d0c.8f1e, irq 11
5: Int: Not used            : irq 11
6: Int: Not used            : irq 5
Licensed features for this platform:
Maximum Physical Interfaces       : Unlimited      perpetual
Maximum VLANs                     : 50             perpetual
Inside Hosts                      : Unlimited      perpetual
Failover                          : Disabled       perpetual
VPN-DES                           : Enabled        perpetual
VPN-3DES-AES                      : Enabled        perpetual
Security Contexts                 : 0              perpetual
GTP/GPRS                          : Disabled       perpetual
AnyConnect Premium Peers          : 2              perpetual
AnyConnect Essentials             : Disabled       perpetual
Other VPN Peers                   : 250            perpetual
Total VPN Peers                   : 250            perpetual
Shared License                    : Disabled       perpetual
AnyConnect for Mobile             : Disabled       perpetual
AnyConnect for Cisco VPN Phone    : Disabled       perpetual
Advanced Endpoint Assessment      : Disabled       perpetual
UC Phone Proxy Sessions           : 2              perpetual
Total UC Proxy Sessions           : 2              perpetual
Botnet Traffic Filter             : Disabled       perpetual
Intercompany Media Engine         : Disabled       perpetual
This platform has a Base license.
Serial Number: JMX1AXXXXX
Running Permanent Activation Key: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Configuration register is 0x1
Configuration has not been modified since last system restart.
fy-a#
Ramraj please do correct me if am wrong.
Please do rate if the given information helps.
By
Karthik

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.

Hi Jdentremont,
Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
To troubleshoot your problem, please follow the steps below:
1. Navigate to
“X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
You should see some photo files in this folder as the following screenshot.
2. Delete all the files in this folder.
3. On test PC, delete local cache files.
%userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
4. Sign-in Lync with the test account.
5. Go back to the ABS file share, check if there is any Photo file in the folder.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

HT1310 unable to see CD/DVD during bootup

Similar Messages

Maybe you are looking for