HT1310 what if the startup Manager does not show up after having followed the steps above?

My Mac Book Pro showed a flashing file. I tried to go to the startup manager but if I press the start button and the option (ALT) key, I still only get a white screen. Instead of the flashing file I have now the mouse arrow. What to do?

I have the same issue with my computer right now..were you able to fix it by any chance?

Similar Messages

I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

It is hard to exactly understand what you have done or not by you one sentence description. My thought is have you read in the Pages User Guide? Here is what it says about updating a chart in Pages:
Updating a Chart Copied from a Numbers Document
If you’ve created a chart in Numbers, you can copy it and paste it into your Pages document. After it’s been pasted into Pages, the chart remains linked to the data tables it references in Numbers. To change the chart data, open the original Numbers document and edit the data there, save the Numbers document, and then refresh the chart data in Pages.To update a chart after you’ve updated its linked Numbers table:
Select the chart on the page and click the Refresh button that appears.
Note: You must save the Numbers document before copying and pasting your chart into your Pages document and after editing the Numbers data tables that the chart references.
I hope it has helped you.

How do I send text messages from my Ipod touch? The "send" button does not light up after typing in the message.

How do I send text messages from my Ipod touch? The "send" button does not light up.

First of all, you need you have at least iOS 5 installed. Second, the person you are texting must have an iDevice with iOS 5 or higher installed. You can´t send messages to an non-iDevice. You´ll also need an Wi-Fi network to send iMessages. Hope it helped!
Message was edited by: AppleTechTalk1100

A multi-day/all-day event in the iCloud calendar does not show up in iCal if the "all-day" box is checked

When I establish a multi-day event on iCloud but do not check the "all-day" box it shows up just fine in iCal as an event that exists on each day along side the other events that occupy those dates. However, when I check the "all-day" box when editing the event (in either calendar) the event completely disappears from the iCal calendar (it shows up across the top of the iCloud calendar in the "all-day eventt" line. On my iPhone, there is no change in appearance (the event shows up on each day).
Anybody have a clue what causes this? Maybe just a "feature" of iCal beta?

This is exactly what's happening to me. I've been able to recreate this on a Touch also with OS4. It's not occuring on OS3. I've only been able to recreate the problem on July 30th and August 1st calendar dates for some reason. It may be happening on other dates also but I havn't been able to find any.
To recreate the problem go into day view on the calendar. Go to August 1st and create a calendar entry. Then touch the left arrow to go back a day then touch the right arrow to return to august 1st and your entry is invisible. It's still there because if you go forward a day then go back a day it shows.
I've been using list view only now to avoid missing these invisible entries.

I've downloaded itunes on my computer, but the iTunes store does not show up and HTML and the links do not work?

I've successfully downloaded iTunes to my PC. Every function appears to work, however when accessing iTunes store it does not come up in HTML format and when I click a link it times out.

Hi Augstiner57, I have the same problem. Did you figure it out? Mine seems to have happened after I updated Apple TV. Now it doesn't recognize my Home Sharing even though on my MacBook is it turned on.
I am running an old OS though (Leopard) so I am wondering if I need to upgrade.

I have purchased an app, Jelly Defense, from the app store. It says downloaded on the computer but does not show up at all on the iPod. Restrictions are on and ready to receive. The Wi Fi says it's on too

The Wi Fi is on, but the app doesn't even show up onthe device. On my computer in purchased, it shows it's downloaded. Now what?

The requirements for that app state that you need a 3rd-generation or 4th-generation iPod touch, with iOS 4.2 or later. Is what what you have?

"database manager" does not show up after MaxDB install

We have about 5 MaxDB/LiveCache installations.
Some of them has the "start->all programs->my SQL MaxDB->database manager" , while
some of them do not have above item.
I think there is a PC command to bring above item visible or accessible. Could you help?
P.S. I have used dbmcli to confirm the livecache is running well.
Thanks!

> I go to SMP and check software download center->
> My Company's Application Components" MAXDB" MAXDB 7.5 , 7.6, 7.7"
>
> I see : "no data available" for all above.
>
> Do you know why? Thanks!
I cannot know, but I bet there are some license things your company has to check until you can access that area.
Maybe the contract of your company was bound to a different DBMS until now?
Meanwhile you can just download the software from SDN - it's the same software, it's just that it may not be the latest build.
regards,
Lars

Hub Manager does not show Wireless connection

My 'Hub Manager' shows my Ethernet connected PC; my hub phone and the wireless connected printer.
My daughter has a new laptop which has wireless connection to my Hub. According to her laptop it is connected to my Hub and she has access to the internet.
However, my Hub Manager does not show her as connected to the Hub. The result of this means that she cannot connect to the wireless printer.
We have disconnected and re connected to no avail.
Any thoughts??? All help appreciated.

Hi
to get more replies suggest you repost on the broadband board
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

I'm getting this error with bootcamp "The startup disk does not have enough space to be partitioned"

Here's the story...
I had a dual boot configuration on my mac with Mac OS X Lion and Windows XP (made with bootcamp).
I decided to reinstall windows.
I deleted the windows partition using BootCamp.
Tried to recreate the Windows partition with Boot Camp and got: "The startup disk does not have enough space to be partitioned You must have at least 10 GB of free space available"
After reading several posts on this forum I decided to defrag the hard drive and try again.
The defrag did not work and I'm still getting the error, I have 22 gb of free space on my drive.
Any suggestions?
Also, I tried repair disk and repair permissions
Hmm, my external harddrive says on the box "OS X 10.5.8 or higher (32-bit kernel only)" Could the 32-bit requirement be an issue? Is lion 64-bit?

Boot Camp must be able to allocate a contiguous block of space on the drive. If it cannot find 10 GBs of contiguous space, then you cannot create the Windows partition.
You will have to backup your OS X partition to an external drive, boot from the external drive, use Disk Utility to repartition and reformat your hard drive back to a single volume, then restore your backup to the internal hard drive.
Get an empty external hard drive and clone your internal drive to the external one.
Boot from the external hard drive.
Erase the internal hard drive.
Restore the external clone to the internal hard drive.
Clone the internal drive to the external drive
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive and click on the downward pointing arrow button.
After startup do the following:
Erase internal hard drive
Open Disk Utility in your Utilities folder.
After DU loads select your internal hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed. Do not quit Disk Utility.
Restore the clone to the internal hard drive
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the internal hard drive. Source means the external startup drive.
Note that the Source and Destination drives are swapped for this last procedure.

"The startup disk does not have enough space to be partitioned?" WHY!??

I"m trying to intall windows 7 on my Macbook air OS X 10.6. When i enter bootCam i get this error "The startup disk does not have enough space to be partitioned" . It says I need 10GBs of free space, even though I have 500GBs of free space on my drive external hardriver.
I did my research, and a lot of people are saying to use idefrag and defrag the hardrive, which i did. I also verifed disk permissions and repaired disk permission and all the other stuff.
What should i do? Apple hass the shittiest service. I spend $1100 bucks for something and i don't even get support without paying? to me, that's BS. so if anyone could help i would greatly appreciate it.

Thanks Bob.
And now to close this thrilling episode we will sing the "Dragnet Theme Song". All together now.....
“Dum De Dum Dum…”
“Dum De Dum Dum Dum”

Hello, Trying to run Bootcamp on my 15" Macbook Pro (Maverick).60 gig available on my computer's hard drive and 250 gig on a separate hard drive that I have attached which is single partitioned. Keeps saying "The startup disk does not have enough space"

Hello,
I'm trying to run Bootcamp on my 15" Macbook Pro (Maverick). I have 60 gig available on my computer's hard drive and have 250 gig on a separate hard drive that I have attached, which is single partitioned (MS-DOS FAT). It keeps saying "The startup disk does not have enough space, you must have 28 gig of free space available" Does anyone know what I'm doing wrong? Any help would be much appreciated.

Thanks for the advice Bob The Fisherman. I'm just reading what turbostar has kindly written and it appears that perhaps, if I take advice from you both, I need to free more space up on the computer's hard drive?
With the external hard drive; would it be advisable to defragment? Know of any defrag freeware for Mac OSX?
Many thanks to you both.

HT1430 my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

There is a hardware problem. Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.

I can't get my password manager working. It remembers passwords for websites but when I enter in a new password (because this had to be changed) or when I have a new username + PW that I wish to save, the password manager does not appear.

I can't get my password manager working. It remembers passwords for websites but when I enter in a new password (because this had to be changed) or when I have a new username + PW that I wish to save, the password manager does not appear.

If you updated your existing account then try logging out of it on the iPhone by tapping on the id in Settings > iTunes & App Stores and then log back in and see if that 'refreshes' the account on the iPad.
If you created a new account then you can log out of the old account and in with the new one as above, but any content that you purchased/downloaded via the old account will remain tied to that old account, and only that old account can re-download its content and download updates to its apps.

What causes iphone 3gs every time I insert the SIM card does not show the screen or no service?

what causes iphone 3gs every time I insert the SIM card does not show the screen or no service?

If the iPhone was unlocked unofficially, it has been locked to original carrier again.

Hi. I just wanted to update my 3 apps PS, Brigde and Indesign. After doing that I wasn't ablle to open Brigde??? PS and Indesign works fine. Further more the Application Manager does not seem to register the updates I have made. Everytime I open the compu

Hi. I just wanted to update my 3 apps PS, Brigde and Indesign. After doing that I wasn't abble to open Brigde??? PS and Indesign works fine. Further more the Application Manager does not seem to register the updates I have made on Indesign and PS. Everytime I open the computer MacIBook 4.1, OS 10.6.7) it looks like I haven't updated software? Please help! Kurt

Moving this discussion to the Bridge General Discussion forum.
Kurt Rodahl Hoppe I would recommend reviewing Updates repeatedly applied | CC which discusses how to apply the updates successfully.

HT1310 what if the startup Manager does not show up after having followed the steps above?

Similar Messages

Maybe you are looking for