HT1311 Change country now no longer works

On ios7
The process falls over the address fields because the dont match the store country
Trying to change uk -> us

I've been trying to change the country since April and Apple told me to create another ID in the other country, because they can't change it.
I have a season pass from How I Met Your Mother 8, that is still opened, although there are no more episodes to see. Apple says is 20th Centure Fox problem and they can't do anything.
The best think to do is not to use iTunes Store and stop buying Apple products.

Similar Messages

I have updated to Mozilla 16.0.1 and yahoo toolbar 2.4.8.20120412011105. Search assist now no longer works on the toolbar. Enter key also will not work on toolb

I have updated to Mozilla 16.0.1 and yahoo toolbar 2.4.8.20120412011105. Search assist now no longer works on the toolbar, nor does the enter key. I've reinstalled both Mozilla and the yahoo toolbar. I've followed the instructions given in the customize toolbar section, but I am thinking that perhaps this toolbar just doesn't work with Mozilla?

'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

I cannot open itunes on windows. It keeps saying short cut has changed or moved no longer working properly. I have tried everything. can someone please help. I have a older version of windows running. I cannot even do a repair on my computer

I cannot open itunes on my windows (older verson of windows) It keeps saying short cut has change or moved and no longer working properly. I have tried to do a repair on the file but the computer wont let me. I have tried reinstalling itunes but still not working. Is there anything you can sugguest please as I need my itunes.I have looked through the support questions and have tried everything. I have on Bonjour on my computer. Thanks heaps.

See Troubleshooting issues with iTunes for Windows updates for a complete set of iTunes rebuild steps.
tt2

HT203687 iCloud is now no longer working with Outlook running on Windows Vista. Is this still unresolved?

iCloud is no longer working with my Outlook 2007 running on Windows Vista. Is there any resolution from Apple?

Hi,
Please check whether the issue happens when using the Outlook 2010 with Windows server 2003 SP2 to access other mailboxes, such as new created Exchange 2013 mailbox or other migration mailbox.
Since the issue doesn’t occur when using Outlook in other machine, the mailbox configuration in Exchange server side should be correct. Please
create a new Outlook profile
for the problematic user in Windows server 2003 with Outlook 2010 to have a try.
Regards,
Winnie Liang
TechNet Community Support

'Connection Error' Sample RTMP video used to work, now no longer works?!

Hello All,
I had FMS 3.5 developer package installed on my server installed about a month ago. I used to be able to go to the /webroot/ page to see the sample RTMP video play and it worked great. Today, I go to view that page and find that it no longer plays. I get "Connection Error. Please preee Play to try again."
Pressing the play button does nothing, so I click the RTMP thumbnail and it reloads ony to give me that same error again.
I can click the HTTP thumbnail and see the video play just fine. But, I want RTMP and after over an hour on the phone with my managed hosting tech, we can't find anything wrong.
Here's the thing: I haven't done anything, I have not changed anything, I have not manipulated the server software whatsoever. It just stopped working and gives me "Connection Error."
I checked that port 1935 was open, and it is.
UPDATED:
When I click on the RTMP thumbnail, after the 'Connection Error' message comes up in the player, the following things happen in my server's error log:
"File does not exist: /folder/folder/folder/fcs"
"File does not exist: /folder/folder/folder/open"
The corresponding IP is my own.
The /folder/folder/folder/ corresponds to my public_http folder and related file structure for the website, NOT the RTMP server. I have no idea why the F
MS is looking in my public_http for fcs and open, but it is.
Thoughts?
Please help? Many thanks in advance!
Sincerely,
wordman

SE,
I'm logged on using PuTTY, my server is Linux and I did in fact get to view the log files.
I realize the sample page ought to be discarded as a concern, but I was hoping I might learn something from this.
I don't have the knowledge to try another RTMP player/client, I am brand new to this. I have Flash CS4 Professional, but I need to learn what to do to build a .SWF to play a sample file.
As for player development, I have been doing research on which might be best for me. In the short term I just need a basic player. In the long term, a player with insertable banners (for in-house promotion and identifiaction, not for ads) and a chat function. The banners may not be necessary as I want the player to be located in a stand-alone page as opposed to a pop-up, so I can do banners in the page itself.
I have looked into REOPS and Strobe, but the tech is written in engineer-speak so most of it is zooming right over my head. I'm self-taught with PHP so I know this all can't be THAT difficult. The jumping-off point is hard to find though. I need something in human-speak that's a wee easier to understand. A basic player would be lovely right now. I don't even care about skinning, just colors.
Using the command to check if FMS is running leaves me with 4 lines of info: 5-digit number, ? 00:00:00 fmsmaster (fmsedge, fmscore, fmsadmin)
Does that mean it isn't running? If so, what can I do to restart it and worse, why would it have stopped?
Thanks for your help!
Sincerely,
wordman

Exporting Track Changes to Word no longer works

Just like it says in the subject line: It used to be that I could get a Word doc with Track Changes on and comments from my editor, do my own changes/add comments, then export it as a Word doc no problem. Now Pages either refuses to export the document or mangles it when exporting, causing certain changes to be automatically accepted or declined.
I was hoping that today's iCloud update for iWork would have this little bug fix in it, but no luck. Has anyone else encountered this and does anyone have any suggestions for how to fix it?
Thanks!

I think your problem could be a simple one of corrupt preferences. I think Yvan's script removes them, but maybe not. When something that used to work stops doing so, the most likely culprit is corrupt preferences. Go to HD > Users > (your account) > Library > Preferences, delete the com.apple.iwork.pages.plist file & then restart Pages. In Finder, hold down the Option key while clicking on the Go menu & your user Library will appear about halfway down the list.

Changed password, now neither one works

just changed my admin password and after I changed it a popup appeared that I exited out of without reading, saying I needed to do something in order for my new password to work; Now I can't use my old or new password to access things, I'm at college so I don't have access to the discs.
What did that popup say I needed to do?

What are you doing when it asks you for this? - if you previously set up the Airport with the Airport Utility, you were asked to enter a password so that you could edit your setup in the future - if you didn't enter one then the default password is "public" - it is not your network or modem/router password - let me know if this helps

Itouch - USB device not recognized and Itouch now no longer works

I'm now on my 3rd Itouch since December all due to the same problem. All seemed to be going well with my 3rd replacement Itouch. Having loaded most of my cd collection into ITunes the night before I was going on holiday I synced my Itouch. Some sort of automatic download took place I think from Microsoft and suggested my drivers were being updated. Next thing I got message to restore my Itouch to factory settings. I did this and all the problems I had with my previou Itouch's started again.
When I now plug my Itouch into my laptop it says "USB device not recognized" and the Itouch will not switch on. I've done everything including reinstalling Itunes, holding down the power and home key but to no avail. Looks like I'm going to have to send my Itouch back again. I have a suspicion that a Microsoft download is corrupting the drivers. If anyone can help I would be very grateful. I really like my Itouch but the fact it keeps failing leads me to wonder if I should opt for something else.

I had success with the holding down the keys and connecting to usb and using itunes to restore firmware like they show here
http://support.apple.com/kb/HT1808
the showing the usb thingy on the screen part

Why does Sync Now no longer work on my iPad

After several Partial backups/syncs, my iPad "Sync Now" is greed out even when I'm connected to power and the wifi network (my macMini says I'm connected). Both machines acknowledge connection to the wifi network.

Have you tried connecting to your computer and sync using iTunes? If it will sync that way, the means the problem is the wireless sync. One step in the troubleshooting process. You also might want to consider posting here.
iPad Community

Changing printer settings no longer works - requesting lpadmin password!

When pressing the _"Pause Printer"_ button, or changing printer settings, I get a dialog box come up saying:
*Type the name and password of a user in the "lpadmin" group to allow Photosmart C4500 series (HPF615EE).app to make changes.*
I have typed my username and password in several times, to no avail. I am the only administrator on this computer. Apparently I am not a member of this "lpadmin" group, and have never seen it before in my life!
What do I do?
(? Possibly since upgrading to 10.5.7 ?)

I am having the same problem. When I use the fix posted by John Blanchard, I "A Directory Service error occured"
My output of the "dscl" command is a little different
AppleMetaNodeLocation: /Local/Default
GeneratedUID: ABCDEFAB-CDEF-ABCD-EFAB-CDEF00000062
GroupMembership: Guest1
Password: *
PrimaryGroupID: 98
RealName:
Print Administrators
RecordName: _lpadmin lpadmin
RecordType: dsRecTypeStandard:Groups
So what changes do I need to make to John's terminal commands to fix my problem.
Thanks.
Len

After installing Java plugin, Firefox Appearance changed. Now Java completely works, but Firefox looks ugly

I recently had to install the Java Plugin.... Well, it took me about 20 minutes to get it right... I made some mistakes, like, copying another Lib files, or copying the lib files themselves and not links to them. I should say i am using Slackware 14.0. Well, i managed to install the plugin correctly, but firefox changed from this: http://cdn.portableapps.com/FirefoxPortable.png to this imageshack.us/scaled/landing/837/snapshot1c.png
I am new to Linux, kind of... And i am new to Firefox too... I searched online but i couldnt find nobody with the same problem... I checked to see if it was a Theme, but i only have the Default 15.0.1

You get the orange Firefox menu button if the menu bar is hidden (View > Toolbars).<br />
On Linux the (gray) Firefox menu button will appear on the Tab bar and not instead of the title bar as on the Windows screenshot.
See:
*https://support.mozilla.org/kb/how-do-i-get-firefox-button
*https://support.mozilla.org/kb/Menu+bar+is+missing

Does anyone know of a British or Australian dictionary that is compatible with Firefox 5 - my previous addons which worked a treat now no longer work

I word process a lot in firefox and value being able to spell check as I type.. Since I've installed firefox 5 my Australian dictionary doesn't work. I've tried to install a British dictionary with no success.
Any help would be appreciated.

use this for firefox 5
https://addons.mozilla.org/en-US/firefox/addon/au-english-dictionary/
works perfectly

IPad no longer working with my HP wireless printer

My HP LaserJet CP1525NW Color printer was working flawlessly with my iPad Air and now no longer works. Any suggestions?

Did you try restarting the iPad or rebooting your router? Maybe either of those would help.

HT204053 how to I remove an authorised computer when it is no longer working and accessible?

I want to deauthorise a couple of computers that is now no longer working. How can I do it as I have no access to the authorised computers.

If you no longer have, or access to, the computer(s) you want to deauthorise,
Log in to iTunes, go to "view your account info" on the itunes store, deauthorise all five,
(Please Note: this can only be done Once every 12 months)
Then re-authorize your current Computer(s) one at a time..
Authorise / Deauthorise About
http://support.apple.com/kb/HT1420

Dashcode no longer works with Lion

Snow Leopard 64 with Dashcode - no problems.
Updated to Lion - Dashcode now no longer works.
Any ideas people?

Found the 3.2 but wont works!
I've extract and copied the 3.2 Simulator SDK right alongside the 4.3 (Path where I copied the 3.2 folder: Developer, Platforms, iPhoneSimulator.platform, Developer, SDKs), but won't works! Now I have in Dashcode the option to switch to 3.2 (Ipad) but an error occurres when the ipad try to open: "The simulator can't find the SDK KIT. You need to reinstall it." :-(

HT1311 Change country now no longer works

Similar Messages

Maybe you are looking for