HT1311 i tried to do a backup from my old iphone as i have a new one that was signed into another itunes account. it said i cant do it because the iphone rejected the request. how do i get around this? i have signed out of the old acct and into mine on th

i tried to do a backup from my old iphone as i have a new one that was signed into another itunes account. it said i cant do it because the iphone rejected the request. how do i get around this? i have signed out of the old acct and into mine on the phone

What is the precise wording of the error message that occurs on the old iPhone when attempting to do a backup?
Are you attempting to backup via iTunes on the computer or iCloud?

Similar Messages

  • I've a few issues, my old computer was out of memory and i changed to a new one which was already on another itunes account.  When i upgraded to os5 my library has gone it has synced with the new computer - how do i restore the old ipad information?  ple

    I've a few issues, my old computer was out of memory.  I changed to a new one which already had another itunes account (for my business)  when i upgraded to os5 my library has dissappeared as it has syncd with the new computer.  Is there any way i can restore the information previously from my ipad?  really appreciate any advice thanx in advance

    Lynda-
    If you still have the old computer, you should be able to connect the iPad, run iTunes and restore from a backup from a previous sync.  Now that you have it updated, you will not need to do that again.
    Fred

  • Preprocessor command, assigned the variable and then compare the variable to int. How can I get around this?

    #define ON 1
    #define OFF 0
    in seperate code
    int variable = ON;
    variable is globally define for that module.
    in seperate code
    if (variable == ON)
    the complier errors off on the if (variable==ON)
    My guess variable is variable in of type int and ON is a preprocessor command. Therefore it is a mismatch and complier doesn't like it. How can I get around this.
    thank
    Mahen

    Mahen
    What is the exact message of the compiler?
    I think the error is, that the compiler does not find the definition of ON
    and OFF. Is it in the same source file?
    If not, try to put it into an .h file and include it where you need it.
    Stephan
    "Mahen" schrieb im Newsbeitrag
    news:[email protected]..
    > Preprocessor command, assigned the variable and then compare the
    > variable to int.
    >
    > How can I get around this?
    >
    > #define ON 1
    > #define OFF 0
    > in seperate code
    >
    > int variable = ON;
    > variable is globally define for that module.
    > in seperate code
    > if (variable == ON)
    > {
    >
    >
    > }
    >
    > the complier errors off on the if (variable==ON)
    > My guess variable is variable in of type int and ON is a preprocessor
    > c
    ommand. Therefore it is a mismatch and complier doesn't like it. How
    > can I get around this.
    > thank
    > Mahen

  • Each time i try to share my movie to media browser it sais'The project could not be prepared for publishing because an error occurred. (-50)'' how do i get around this

    Each time i try to share my movie to media browser it sais'The project could not be prepared for publishing because an error occurred. (-50)'' how do i get around this

    Hi
    Error -43
    -43
    fnfErr
    File not found; Folder not found; Edition container not found; Target not found
    So Your original is still there ? or did You move or trash anything ?
    Yours Bengt W

  • Syncing old music from old computer to new one that was not purchased at itunes

    i cant seem to get my old music to sync on my new computer thing from cds and things i purchased at walmart.com i have it on my iphone and new pc will sync all i bought threw i tunes but and the movies i got in bluerays with digital copy but i cant get it to store the rest of my music am i just screwed ?help

    check out this post by Zevoneer.

  • My IPad is requesting that sign into iCloud. When I put in my password it tells me that it is incorrect and to try to reset. When do that it sill won't let me. This is enabling me from doing anything on my iPad. How do I get around this?

    My IPad is requesting that sign into iCloud. When I put in my password it tells me that it is incorrect and to try to reset. When do that it sill won't let me. This is enabling me from doing anything on my iPad. How do I get around this?My IPad is requesting that sign into iCloud. When I put in my password it tells me that it is incorrect and to try to reset. When do that it sill won't let me. This is enabling me from doing anything on my iPad. How do I get around this?

    Where are you resetting the password? On your computer, I assume since you cannot use the iPad?
    Have you tried a reset to see if the popup will disappear?
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the button

  • TS1702 I keep getting the message "Your purchase could not be completed" on my iPhone when I try to make purchases for games.  How do I get around this?

    I keep getting the message "Your purchase could not be completed" on my iPhone when I try to make purchases for games.  How do I get around this?

    Hbauer60 wrote:
    ...  How do I get around this?
    You cannot.
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • I bought a used iPhone on ebay.  when I try to activate it, I get a message that the owner needs to sign in to the device with their appleID and password.  I have no way of knowing who the owner is.  How can I get around this?

    I bought a used iPhone on ebay.  when I try to activate it, I get a message that the owner needs to sign in to the device with their appleID and password.  I have no way of knowing who the owner is.  How can I get around this?

    Check the eBay listing. Did it state the device was Activation Locked? If not, then make a claim as Meg stated and get a refund. You will not be able to activate the phone and no one can help you contact the owner, unless that is the person that sold the device. If they cannot remove the phone from their account because it is not theirs, then refund is your route. Even Apple cannot assist with locating the previous owner.

  • Bought second hand iPhone 4 they cannot remember the iCloud password how do I get around this

    Bought a second hand iphone4 have contacted seller they cannot remember iCloud password how do I get around this?

    They need to reset their Apple ID password by going to http://iforgot.apple.com and then turn off Find My iPhone.
    At that point you can restore the device as new.
    If they cannot or will not do that, demand a refund.
    If they will not provide a refund, contact law enforcement as the device is most likely stolen.

  • I cannot sync my phone because my device is locked and the screen is broken. how can i get around this?

    My screen on my iPhone 5s 16g has broken and i just received a new one in the mail. i want to sync my old phone to iTunes so i can restore my new one, but cannot sync do to the fact that my screen is broken and i am unable to unlock the phone… how can i get around this?

    You don't. If you use a 3rd party to "fix it" or attempt to do it yourself, Apple will reject the return and charge you the full price of the phone as if you had not returned it at all.
    It's too late. You should have been backing up before it failed.

  • My iPad is disabled, but I know the passcode.. When i connect it to iTunes it says it can't access it because it has a passcode. How can i get rid of the passcode without resetting the iPad? And if there is no way to do so, how do I completely reset it?

    My iPad is disabled, but I know the passcode.. When i connect it to iTunes it says it can't access it because it has a passcode. How can i get rid of the passcode without resetting the iPad? And if there is no way to do so, how do I completely reset it?

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • HT2518 How do you reset the password on a migrated user account? Mac wants the old password putting in before we can set a new password and the old password won't work.  How do we get around this?

    Used Migraton Assist to transfer data from old Dell PC onto new Macbook Pro.  Data has come across but cannota access the User Account from the Dell.  It is displayed on the desktop of the Mac but is requesting and new password.  Before we can reset the password we have to put in the old password.  We have put in the old password but it doesn't work and therefore we can't reset the password and get into the User Account. 
    How do we get around this problem so that we can access the User Account.
    Although the data has transferred we cannot see our contacts transferred from Outlook into Mail.  We are wondering if they are contained within our User Account, but can't find out until we can access the it?
    Help wold be much appreciated.
    Pensos

    Hello:
    Hopefully this will help you:
    http://support.apple.com/kb/PH4117
    Barry

  • I have multiple emails associated with my i phone, but can't get my mac to associate some of the email names because it is associated with other apple id , but it's my id. how can i get around this?

    I have multiple emails associated with my i phone, but can't get my mac to associate some of the email names because it is associated with other apple id , but it's my id. how can i get around this?

    - Try contacting iTunes for the password problem:
    Apple - Support - iTunes - Contact Us
    - For the other problem you can try a reset. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - The next standard thing to do is to download/install a new app but you cant 'do that.
    - Instead, try restoring from backup.

  • HT1212 My device is disabled and I can't open/unlock it to trust the computer so I need to know how do I get around this problem please.

    My device is disabled and I can't open/unlock it to trust the computer so I need to know how do I get around this problem please. I don't mind restoring it updating anything that will work

    Follow the instructions in the support document that you linked to the forum with. See the section about not syncing. You will probably need to erase it in iCloud to be able to restore it as new. Remove the device from your iCloud account which will disable Find My iPhone.

  • My iTunes doesnt recognise my iPhone 4, on my Mac. I have a PowerPC running 10.5.8. How do i get around this?

    My iTunes doesnt recognise my iPhone 4, on my Mac. I have a PowerPC running 10.5.8. How do i get around this? I have tried lots of forums, they tell you the same things, re-install iTunes, the latest version! Sadly, this doesnt work on my 'OLD' Mac. Help please, as i do NOT want to be buying an updated Mac at this time!!!
       Thanks

    Hey, Buzz.
    You can download the latest version of iTunes supported on Leopard here:
    http://support.apple.com/kb/DL1575
    I hope that helps.

Maybe you are looking for

  • After update to Firefox 6.0 two websites are opening Welcome/Upgrade requests whenever I open the browser

    I found that " Read it Later" and " Lat Pass" are inveriably opening webpages whenever I open Firefox. This is annoying. Being disgusted I have ultimately uninstalled Firefox - though I have been using it for over 5 years. Another point - what is the

  • JNI: experience in creating DLLs with G++ (mingw32)?

    Hello. I'm trying to create a DLL: --------------/HelloWorld.cpp/------ #include <jni.h> #include "HelloWorld.h" #include <stdio.h> JNIEXPORT void JNICALL Java_HelloWorld_displayMessage(JNIEnv *env, jobject obj) printf("Hello world!\n"); return; I pr

  • Change domain, hostname and IP after installation

    Hi, I installed BO XI 3.1 SP3 on a Windows Server 2008. Now it's maybe necessary to change the domain, hostname and IP adress of the server. I guess this will affect the BusinessObjects installation as well. Is it enough to enter the new hostname in

  • Model Driven Configuration Management

    Hi, i'm a PhD student at the [VLBA Lab in Magdeburg|http://www.vlba-lab.de/] and i would like to share my thoughts about my research topic '[Model Driven Configuration Management|http://www.vlba-lab.de/en/Home/Research/Topics/ModelDrivenConfiguration

  • Adobe Print Form Issue

    Hi Experts, I have a requirement of making a particular Table line BOLD in the Main window in Data Subform. This subform is flowed content. I am writing the Java Script Code as- if (!this.TAXM1.rawValue.isNull)   this.ARKTX.font.weight ="bold"; But T