HT1316 How to restore and unlock sim to another carrier

Forgot n misplaced unlock code my budy got for me cus i dont know how to do these things my self  alil tech illerterare,can sum 1 help me?
THANKS

turn the device off
press & hold the home button connect to itunes while holding the button connect to itunes : dont let the home button go until the connect to itunes loo appear on the screen
let go of the home button - look at itunes & itunes wil say you have detected a phone in recovery mode you must restore : but once yoiu restore and your seting up the device - set device up as a NEW IPHONE
thanc your device will unlock

Similar Messages

  • How to Restore and unlock IPOD touch

    ok, he is where I am at:
    Daughters friend IPOD Touch displays red disabled screen
    Unable to enter password.
    Did restore and at approx 50% don with restore download, itunes says unable to connect due to it being locked. Enter password.
    I have password, but unable to enter password.
    Computer being used for restore is different from previous computer used
    Ok to wipe device of all data
    I am stuck with it because, my daughter said my Dad can do anything.
    I am Android/blackberry fellow, so no jokes and I am not use to being locked down like this.
    Any way to get out of this circle of need to enter password, to do a full restore?

    Try disabling the computer's antivirus and firewall.
    - Next try the manual install method of:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
    Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
    - Then try on another computer

  • Hello, the ipad 2, CREA locked i put a password and do not remember. . How do I restore and unlock?

    Hello, the ipad 2, CREA locked i put a password and do not remember. . How do I restore and unlock?

    If you've forgotten the passcode to unlock the iPad then you will need to connect it to the computer that you normally sync to and you should then be able to reset the iPad and re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808
    If you do it via a different computer then :
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

  • File Lock - How to lock and unlock a file ? Can we do that for an FTP File?

    Hi All,
    I like to retrieve a file from the FTP server using Apache Commons Net libraries.
    for example if the file size is 20MB. When the file is in the progress of copying or transferring from the FTP server i need to lock the local file which is in our local directory so that no other process will use the same local file which is in the process of copying otherwise partially copied files will be used by another process.
    the file should be locked when it was in the progress of copying from the server. I have an automatic process which will access file objects at certain time and try to process the files.
    I like to know the simplest and easiest way to lock and unlock a file object locally which is trying to copy a file from the FTP server which is of huge size.
    And also i like to know how to lock and unlock a file in general?
    Thanks,
    J.Kathir

    we can set it read only only when it complete finishing the writing.
    can we able to make the file as read-only while transferring data to file.
    How to achieve it ? pls give me some sample code

  • Can I use a sim from another carrier when traveling overseas?

    Can I use a sim from another carrier while in Europe or Canada to enjoy local rates and avoid roaming charges?

    If your phone is officially unlocked, yes. Otherwise, no.

  • HT5654 how to restore and  activate iphone 3gs

    how to activate and restore iphone 3gs with no active sim card

    Hello James
    If that was the SIM card that came with it or was using it last when it had service, it should still go through the motions of getting passed the activation screen. Check out the article below for more information.
    Using an iPhone without a wireless service plan
    http://support.apple.com/kb/HT3406
    Regards,
    -Norm G.

  • How to restore a hard drive through another computer?

    My mid-2007 iMac would not load up past the white screen. I tried everything and was unable to get the hard drive to boot up. I took it to the Apple store but due to the age if the machine they would not attempt to fix it. They were not able to boot the computer off an external drive or network. I removed the hard drive to salvage any data I could. I hooked it up to my Mac mini via a SATA enclosure. I was able to remove my photos, music, etc. I now want to restore the hard drive in a last ditch effort to try and save my computer. I have the drive pulled up in disk utility on my Mac mini. I verified the disk and attempted to repair the disk. Both times I received the message: "Error: Unrecognized file system" I am unsure how to restore this disk so I can return it to the iMac and try and get it to load up. Any other ideas?

    If the disk cannot be repaired, then try erasing and reformatting it using Disk Utility. If unable, then try with a different disk repair app, such as DiskWarrior, Drive Genius, or TechTools Pro. If still no go, get a new bare HD to put into the iMac.

  • How to restore RMAN hot backup to another database on another server?

    I want to know how to restore RMAN hot backup from production server to another database on a testing server.
    The hot backup is from a database named PROD on the production server
    The database to be restored with the hot backup is TEST on the testing server. There is already a PROD database on the testing server and this PROD database must be kept.
    I have read some threads about changing initTEST.ora to PROD to restore such backup but (I think) will not work in my case since I already have a PROD database on the testing server.
    The version is 11gR2 on Linux but the compatible parameter is set to 10.2.0.1.0.
    Thanks for any help.

    Hi,
    Since you are on 11g, hope this helps you http://shivanandarao.wordpress.com/2012/04/28/duplicating-database-without-connecting-to-target-database-or-catalog-database-in-oracle-11g/
    881656     
    Handle:     881656
    Status Level:     Newbie
    Registered:     Aug 25, 2011
    Total Posts:     53
    Total Questions:      31 (31 unresolved)
    Looks like forum is of no help to you. To get better responses, consider closing your threads by providing appropriate points if you feel that they have been answered. Keep the forum clean !!

  • How to verify an unlocked SIM?

    T-mobile finally sent me my SIM unlock instructions. 
    I'm supposed to dial ##782# from the dial screen and hit "call" and it's supposed to bring up a text box where I enter a long string of numbers. At least that's what it's supposed to do. 
    However, when I hit "call" it just closes the dialer and brings me back to the "contacts" screen O.o
    How do I know my phone is unlocked? I'll be traveling over seas this summer and would really like to get this taken care of beforehand. 
    Phone is Lumia 810
    Version 1.7.0.173
    Accessories agent 1.0.5.2
    Feedback to Nokia 2.2.0.9
    Nokia First Use Experience 1.3.0.0
    SmsVCardReceiver 1.0.0.8
    Warranty Registration 1.1.0.4
    SIM Unlock 1.0.0.5
    Solved!
    Go to Solution.

    scoobyman wrote:
    It should be 8 numbers long and if you insert SIM from network other than T-Mobile/Orange/EE you should get a screen to enter it together with the notification of number of attempts remaining (maximum of 10).
    You should key in ##782# without SIM then hit call and if device is unlocked you will get screen with "Your device is already unlocked".
    I unfortunately don't have any other SIMs around that I can try.
    But when I dial ##782# when my SIM is removed, I get a message saying that my SIM is either removed or invalid and my only option is to make an emergency call... :/

  • How to restore AND REPLACE mail folders (don't want duplicates etc)?

    Bad OS X 10.5.7 upgrade has made my machine real slow doing many things.
    So I want to revert to my superduper backup: the only new data since the OS upgrade is my email (and my Aperture data, but I can just restore from my vault for that).
    If I use Mailbox->Archive Mailbox... function in Mail,
    and then restore my old image, how do I get my mail up to date with the info in the archive without getting duplicate messages or other problems?
    In other words, after reverting to my old image, if I execute File->Import Mailboxes... to get my newest email data, what will happen? E.G. restore folder "FAMILY", but I already have a folder "FAMILY" with mostly the same content (just a few new messages in the archive). Will I be left with two copies of most messages?
    ALSO: Does the Archive function keep the folder hierarchy in tact even for the inbox - where the subfolders are different accounts?
    Regards, Strathglass.

    strathglass wrote:
    Bad OS X 10.5.7 upgrade has made my machine real slow doing many things.
    So I want to revert to my superduper backup: the only new data since the OS upgrade is my email (and my Aperture data, but I can just restore from my vault for that).
    If I use Mailbox->Archive Mailbox... function in Mail,
    and then restore my old image, how do I get my mail up to date with the info in the archive without getting duplicate messages or other problems?
    In other words, after reverting to my old image, if I execute File->Import Mailboxes...
    this will import the archive into a new local mailbox in "on my mac section". it will be quite separate from your inbox. you can then copy what you need from that local mailbox back to the inbox and delete the local mailbox.
    to simplify matters you can make a new local mailbox now, move recent messages there and archive only that.
    to get my newest email data, what will happen? E.G. restore folder "FAMILY", but I already have a folder "FAMILY" with mostly the same content (just a few new messages in the archive). Will I be left with two copies of most messages?
    ALSO: Does the Archive function keep the folder hierarchy in tact even for the inbox - where the subfolders are different accounts?
    archive function only archives one mailbox at a time a so you can't talk about any folder hierarchies here.
    Regards, Strathglass.
    Message was edited by: V.K.
    Message was edited by: V.K.

  • How to compile and test SIM card applet

    Dear all
    I have a sample applet:
    package sim.access.sample;
    import sim.access.*;
    public final class helloFile extends Applet implements ToolkitInterface
           private static SIMView  theGsmApplet;
           private static USIMView aUsimApplet;
           private static AID theGSMAppletAID;
           private static AID theUSIMAppletAID;
           private static final byte[]  baGSMAID = {(byte)0xA0,(byte)0x00,(byte)0x00,(byte)0x00,(byte)0x09,(byte)0x00,(byte)0x01};
           protected helloFile(){
           public MyApplet () {
                theGSMAppletAID = new AID();
                // get a reference to the GSM interface
                theGsmApplet = SIMSystem.getTheSIMView(theGSMAppletAID);
           public void doSomethingWithAFile(){
                   // returns the SIMView of the currently selected Applet
                   // allows to implement services that are depend on specific
                   // file in GSM or USIM application as well as to implement
                   // technolgie independent applets.
                   SIMView theView = SIMSystem.getTheSIMView();
                   if(theView instanceof SIMView){
                        // do something with a GSM file
                   else if(theView instanceof USIMView) {
                        //do something with a USIM specific file
                   // Or request a View to a specific application
                   USIMView theView = SIMSystem.getTheSIMView(aUSIMAppletAID);
    }I want to compile and test it, how can i do it ???

    I am trying to compile it on eclipse using JCOP:
    package mytest;
    import sim.toolkit.ToolkitException;
    import sim.toolkit.ToolkitInterface;
    import javacard.framework.APDU;
    import javacard.framework.Applet;
    import javacard.framework.ISO7816;
    import javacard.framework.ISOException;
    public class Test extends Applet implements ToolkitInterface{
         public static void install(byte[] bArray, short bOffset, byte bLength) {
              // GP-compliant JavaCard applet registration
              new Test().register(bArray, (short) (bOffset + 1), bArray[bOffset]);
         public void process(APDU apdu) {
              // Good practice: Return 9000 on SELECT
              if (selectingApplet()) {
                   return;
              byte[] buf = apdu.getBuffer();
              switch (buf[ISO7816.OFFSET_INS]) {
              case (byte) 0x00:
                   break;
              default:
                   // good practice: If you don't know the INStruction, say so:
                   ISOException.throwIt(ISO7816.SW_INS_NOT_SUPPORTED);
         public void processToolkit(byte arg0) throws ToolkitException {
              // TODO Auto-generated method stub
    }It is giving following error on package name:
    resolving constant-pool of clazz Lmytest/Test; failed: missing export file for package sim/toolkit

  • How Many Versions of Unlock/Sim-free iPhone 3g?

    I'm getting confused on the various Unlocked versions of iPhone 3G sold throughout the world especially in countries like Hong Kong, NZ, Italy, Singapore etc.
    Some said its Factory Unlocked from Apple but some need to be unlock by the Telco. Some said it need to Sync with iTunes Store for the first time... etc...etc..
    Can someone help to clarify?
    Thanks.

    Certain Wireless carriers will sell them Unlocked.
    The price for an unlocked is pretty high.
    They are usually sold as unlocked already via the Wireless carrier. Not Apple.
    The only one I knew for sure was T-Mobile Germany way back. But never kept up on all the companies and how they sold them so my info is outdated. Sounds like you know more.

  • How to restore and erase a "mac osx extended" with disk utility?

    hello, I exedently sepret my disks the first one name is: Macintosh HD
    and the secound one name is backup (I chose the name).
    I want to merge them together how should I do it?
    (macbook air 11" osx mavericks)
    I teyed first restore the scound one and it didn't worked here is a screen shut of it:

    Let me make sure i undestand:
    1. you partitioned your internal hard drive into two partitions
    2. you now want to combine them together
    Correct?
    If so, i believe you need to get an external hard drivea dn copy everythiong there - including a COOTABLE clone of your startup drive.
    Then boot from external, and use disk utility to partiton your drive as (1) partition, and format it (HFS+ Journaled).  Then clone back your main info and anything that was on "backup".
    Grant

  • How to restore and keep updated OS

    Hi,
    I'm looking at selling my iMac, so will obviously need to restore it and wipe any trace i ever existed on it.
    I brought the iMac with Snow Leopard, then upgraded it serveral times until what im at now, Mountain Lion.
    I only have the install disks that came with it, whcih are obviously for Snow Leopard.
    If i sell my iMac after restoring it, it'll only have Snow Leopard on it, not Mountain Lion.
    Is there a way around this?
    If so can you point me in the direction  of the instructions for trestoreing and keeping the latested OS intaked.
    Thanks

    You must sell the computer with Snow Leopard. OS X Mountain Lion is registered to your Apple ID and you can't transfer it to anyone. Apart from that, the new owner won't be able to reinstall Mountain Lion.
    Follow these steps:
    1. Insert the Mac OS X disc and hold the C key while your Mac is starting.
    2. Choose your language, and go to Utilities menu (on the menu bar) > Disk Utility.
    3. Select "Macintosh HD" on the sidebar, go to Erase tab and erase the drive.
    4. Close Disk Utility and reinstall Mac OS X.
    5. When the installation finishes, hold the mouse while your computer is starting to eject the DVD, and turn off your computer. Remember to give the discs to the new owner.
    I suggest you to tell to the new owner to update Mac OS X to the most recent version (open  > Software Update), and if he/she wants, purchase OS X Mountain Lion

  • HT1316 how many numbers does my sim codse have i n it

    ?

    The iPhone does not store Contact Phone numbers on the SIM Card. So a normal iPhone SIM Card has no Contact information on it. Your Contact Phone numbers are actually on/in the iPhone, and not on the SIM Card.

Maybe you are looking for