HT1320 Ipod nano issues

I Have a ipod nano 6th gen.  It is stuck on a black screen, despite trying; to connect to itunes,charge,reset etc..
when it is plugged in to charge it almost immedialty starts to get hot and continues to get warmer in temp.
suggestions ?

Hello o0st,
Thank you for using Apple Support Communities.
For more information, take a look at:
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/ts3474
Will not turn on or screen remains dark
Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
If iPod does not turn on after ten minutes, try resetting the device while it is still connected to power. Reset the iPod by holding down the Sleep/Wake button and the Volume Down button for at least eight seconds or until you see the Apple logo appear.
If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music. If iPod appears in iTunes and can play music, no further troubleshooting is needed.
If the screen remains dark and will not turn on, then your iPod may need service.
Have a nice day,
Mario

Similar Messages

  • Windows Vista iPod Nano Issues

    I just bought an iPod Nano 8GB today and when I tried to connect it to my Windows Vista System after installing iTunes, I get an "Add new Hardware" wizard asking me to install the driver for the iPod which obviously doesn't work.
    Of course, I've tried the 5Rs several times and none of them work. Asking here is my last resort.
    I know there are currently issues with Vista but clearly this isn't one of those listed under the article on the site. So I was wondering if this is only specific to my PC.
    Thanks in advance to whoever who can help.

    try what I posted here and report back
    http://discussions.apple.com/thread.jspa?messageID=9071165&#9071165

  • CD, DVD and ipod nano issues

    I just bought a new iPod nano- the first I have ever owned. I installed the iTunes software and that works okay. I plugged in the nano to the computer and the computer recognizes the nano, but iTunes does not. When I open iTunes, I get the following error message: "iTunes Setup Assistant. Warning! The registry settings used by the itunes drivers for importing and burning CDs and DVDs are missing. This can happen as a sreult of installing other CD burning software. Please reinstall iTunes." I have tried reinstalling iTunes several times and it still won't work. I did install the software on my brother's computer and it worked fine, but I can't use that computer on a regular basis. Please help!!!! Thanks!
    ipod nano   Windows XP  

    hiya!
    "Warning! The registry settings used by the itunes drivers for importing and burning CDs and DVDs are missing. This can happen as a sreult of installing other CD burning software. Please reinstall iTunes."
    for some advanced techniques for dealing with that message, see:
    iTunes for Windows: Troubleshooting CD issues caused by device filters
    but if you'd prefer to try some quicker and dirtier techniques, you could try:
    reboot and repair
    reboot the PC (very important), and then do a repair install of itunes. go to your Add/Remove programs, select itunes, click "change/remove" and select "repair".
    ... if no joy with that:
    reinstall the itunes drivers for importing and burning
    you can find them here. if you're on a 32-bit system, use the first link on the page:
    GEAR drivers
    if you've got Norton Ghost installed, read the instructions very carefully. if you still run into trouble with Ghost, see:
    Message: "Insert the "Norton Ghost 10.0" disk and click OK." after installing iTunes 6
    love, b

  • IPod nano issue

    Hello everyone on the Apple Discussions!
    Well Basically I brought an iPod nano for christmas, about a month later their was a problem with the screen (pixel issues) Sent the iPod back to Apple, they replaced it... but after I came back from my trip to france so didn't have anything to listen to on the 3hour train journey
    The new iPod's been fine until last week where it just completley stopped working for no apparent reason, it was completley dead. I'm going to greece soon and the iPod probally won't be back by then...
    I've allways been carefull with my iPod and allways encouraged my friends to get Apple products and allways respected Apple but when I tryed to phone technical support (UK) I got put through to Apple US support and the wrong department. So at the moment i'm really an unhappy customer...
    Would it be possible to refund the iPod nano to get an iPod video (i'd pay the difference) they just look more robust and hold more songs.
    Any help will be highly aprechiated.
    iPod nano 2GB (White)    

    Have you tried holding the MENU and SELECT (center) buttons until you see the Apple logo to reset your iPod?

  • ITunes+QuickTime installation from CD of iPod nano Issue

    During installing the s/w from CD. an error regarding QT was displyed (something to do with files) and later the installation was over. When iTunes is launched get an error "iTunes have encountered problem and needs to be closed". and it asks whether you need to send the report to Microsoft.
    Uninstalled iTunes+QT and tried again but no success. Also tried installing the s/w downloaded from apple website did not get QT installation error but still getting the same MS error. After clicking on the error report, the error signature part shows following information.
    AppName: itunes.exe AppVer: 6.0.1.3 ModName: unknown
    ModVer: 0.0.0.0 Offset: 10001040
    Also tired to find simlar issue on this forum but no luck and hence posting this message.
    Would appreciate help.
    Thanks in advance.

    After reading certain posts I was able to resolve this issue today morning. I have been working on this since yesterday since my new ipod nano was delivered, so about for 15+ hours on and off.
    The problem started when I tried to install s/w from CD. Hence thought of downloading the s/w from the website. That also did not solve the problem. Then started looking at discussions where lot of posts mentioend the similar issue during the same time frame. Uninstalled and reinstalled multiple times. Also went back a week to have my desktops savepoint restored. But no luck.
    Hence when today I found a posting on this site about downloading standalone quicktime, followed that path and what you see, after installing standalone quicktime, iTunes got loaded, was able to see my new ipod nano in itunes and have already uploaded songs on it.
    So whats the lessons learned. Apple still needs to come over the hump of making USER FRIENDLY SOFTWARE ( its that what APPLE is known for?).
    Certainly I never thought that it will be such an exercise to have it installed.

  • HT1320 Ipod nano sync problem

    Need help. Ipod nano will not sync to computer. Does its sync icon on the screen, but no sync happens. Tried resetting without luck. Is there a way to set where sync is to go?

    Do you have any better luck with that if you update to iTunes 10.6.1.7?
    From the notes for the release:
    iTunes 10.6.1 provides a number of improvements, including:
    • Fixes several issues that may cause iTunes to unexpectedly quit while playing videos, changing artwork size in Grid view and syncing photos to devices.
    • Addresses an issue where some iTunes interface elements are incorrectly described by VoiceOver and WindowEyes.
    • Fixes a problem where iTunes may become unresponsive while syncing iPod nano or iPod shuffle.
    • Resolves an ordering problem while browsing TV episodes in your iTunes library on Apple TV.
    http://www.apple.com/itunes/download/

  • HT1320 iPod nano is stuck in Disk Mode.  How do I reset it?

    iPod nano is stuck in Disk Mode and menu wheel is unresponsive.  How do I reset without losing data on iPod?

    Hello jarhead232.
    To try and resolve this issue, please unplug the power from the unit for about 25-30 minutes.  Once this time frame has passed, plug the unit in directly to a wall outlet to see if the printer will power on.
    If the issue persists, please contact our support group using the "Contact Us" link below.
    This didn't answer your question or issue? Find more help at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • HT1320 Ipod nano 7th generation freeze

    my ipod nano 7th generation just froze and is not responding to sleep /wake button or home button. Tried plugging into power as well but the screen remains dark. pl help

    Hi Skaroa1!
    I have a website here that can walk you through some troubleshooting steps for the issues you are seeing with your iPod nano. You will just need to pick the iPod that matches yours and follow the steps that the website suggests here:
    Apple - Support - iPod Troubleshooting Assistants
    http://www.apple.com/support/ipod/five_rs/
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Charging iPod nano issues

    I have no problem updating my iPod nano. I connect easily and iTunes opens and updates the iPod. When I initially connect, the charge signal comes on. However, after updating the iPod stops charging - even though it is still connected. The only way I can find to get it to start charging is to disconnect and reconnect a couple of times and it will eventually work. This usually causes iTunes to freeze on me but at least it starts the iPod nano charging. Is there some reason why the iPod nano would not continue to charge?

    u could also try getting a dock or a wall charger.
    i suppose, but i shouldn't need to. it's frustrating that the PC does charge the iPod - I just need to try several times and every time it works is when iTunes freezes up.
    it does charge until the update is complete so it's almost like the completion of the update is telling the iPod that it doesn't need to charge any more also.....

  • TS1363 windows 8 and ipod nano issues

    I just installed Win8 and downloaded the latest version of itunes now my ipod nano isn't syncing. I followed the troubleshooting steps with no results.

    Hi there franscard,
    You may find the troubleshooting steps in the article below helpful.
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    -Griff W. 

  • IPod nano issues restoring/holding charge?

    My ipod nano needs to be restored nightly and is running out of charge without being used, any suggestions?

    I don't know of anything else to suggest. Do you live near the store you purchased it from? Or would you need to send it in?
    iPod Service Request
    JC

  • HT1320 iPod Nano 2nd Gen isn't detected by any computer using any cable

    Hi all,
    Discovered a 2nd gen ipod nano while digging out the christmas decorations - it powers up and charges through the cable when plugged into either a power outlet or a computer, but the computer will not detect the device at all.
    I've tried two different PCs, and two different cables but still nothing.
    Normally, if a device is plugged in, a notification message and sound are displayed and played, but Windows see no devices in the device manager, and itunes doesn't pickup any devices either.

    Try a different cable or contact apple

  • ITunes 11/iPod Nano issues with syncing

    I just updated to iTunes 11 after recently getting a new 16GB Nano. I wasn't having any trouble syncing my iPod until I downloaded the new iTunes. Now  it keeps getting stuck on the second track that it's attempting to sync (track 2 of 345, e.g.)

    every since I bought a windows 8 computer, having same issue; if I stop; restart it will get one more track, but I have over 20000 tracks; I even manually converted all 22000 tracks from mp3 to m4a and still didn't fix.  it would take days or months to sync 22000 songs manually this way.  If you search online, there are free alternatives to itunes now to sync your ipod and I think I may be leaving itunes if the issue isn't resolved in next week or two. I am seeing the official response from apple seems to be they have no intention at this time to make itunes compatible with windows 8.

  • IPod nano issue with shuffle function--includes unchecked songs

    When I use "shuffle" on my Nano, it is including songs that I have deselected from my music library in iTunes (i.e. songs I don't want loaded to my Nano).
    Anyone know why this is happening? I thought unchecked songs weren't transferred to the device, yet I can play them on it?
    Is this a glitch or known error?
    Thanks for any help you can provide....

    Check the following:
    - Is the iPod full?
    - Is the iPod set to update automatically?
    - Is the iPods update behavior restricted to a certain number of playlists?
    - Rightclick the iPod in the sourcelist, hit update.
    - If nothing else works, try reformatting the iPod with the latest Updater

  • IPod Nano Issues, Please Help

    I purchased my nano on November 18 and havn't had problems until two days ago. Two days ago, it stopped responding to the clikc wheel, I could only turn it on with menu and when I had to hold and unhold it to turn it off. Yesterday it started working again and I was ecstatic. Everything was going great until it started happening. Now, periodically it will stop responding to teh clickwheel. and I have to press Play at the verry bottom of the wheel, the most bottom part of it I can and that sometimes makes it start working.
    I also have version 1.1.
    What do you think I can do?
    And yes, I've resetted/rstored.

    its notthe update
    here is wats new
    1. holding menu will take you to the main menu instead of activating or deactivating the backlight
    2. lyrics and album art staying on screen and not disappearing after 10 seconds
    3. Apple Radio Remote support
    4. Line-out problem, occasionally when going from headphones to line-out, there would be no sound.
    5. The 'Alarm' feature has been overhauled, easier to set the time, and a little bell icon is displayed next to the 'Alarm' menu item when it is set.
    6. 'Screen-lock' has also been changed, slightly different interface, the numbers are in sunken boxes as opposed to the red glow. And a new warning is given telling you to hook your Nano up to your comp if you forget your code.
    7. There was a problem with turning off, if you scrolled back or forward through a playlist/album, back to the main menu, sometimes it would not turn off.
    8. The song title is in bold above the lyrics when you go to the lyrics screen
    9. itunes opens almost instantly (within a second or 2) with the ipod showing. Before, this used to take 5-10 seconds, maybe more.
    10. Reduced lag, before, when scrolling and clicking quickly through menus and songs, had some 'slow down', this is gone now.
    11. Before the update I noticed a lag when I would skip songs, the next song would come on but the tags would have a slight lag on them and that has been fixed as well.

Maybe you are looking for

  • I can't subscribe to adobe export pdf

    Im trying to purchase the export pdf  product but when i click on subscribe, nothing happens

  • What is the reason behind upload speeds lower than...

    Would anyone be able to explain it? 

  • SubStr Issue with Query

    I will give a great thanks for help with this. I have a table with a number field called "lotnum". Each rows "lotnum" has a value of 1000, 1001, 1002, 1003....2000, 2001, 2003, ..etc.) The parent row is always the one ending in zero (i.e.: 1000, 2000

  • To save survey in the ITS

    Hi experts. I have created an activity in CRM with a survey . I access to the CRMD_ORDER by ITS. I create an activity that have a survey when I try to save the survey it is releaded to the next page: res://ieframe.dll/unknownprotocol.htm#sapevent:WFF

  • [Help] Sending HTTP requests

    i was to check whether the web system created can handle a certain number of requests.. is there a possibility of sending a certain number of requests per second using a java? is there any libraries i have to import?