HT1320 my frozen ipod doesn't want to work...how can i turn it off?

My old Ipod froze...and I can not turn it off. The computer doesn't recognize it either

Have you tried a hard reset yet? To do this, press and hold both the Select/Center and Menu buttons together long enough for the Apple logo to appear.
B-rock

Similar Messages

  • TS2771 my itouch 4th gen internal speaker doesn't want to work. what can i do to fix it? help please!

    my itouch 4th gen internal speaker doesn't want to work. what can i do to fix it? help please!

    - Try inserting/removing a earphone plug a dozen or more times.
    - Reset the iPod. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod
    If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. Could be a bad headphone jack.

  • I don't want tabs. How do I turn them off?

    I do not want tabs. How do I turn them off?

    There is a version (2.0.2009110201) on the developer's homepage that is shown as compatible with Firefox 3.6.x
    *'''''Be aware that the developer has not updated the add-on to be compatible with Firefox 4 and Firefox 5; that is a sign that it may no longer be updated and may no longer work after you update from version 3.6.x of Firefox to Firefox 4 or 5.'''''
    Here is the developer's homepage; click on "Download", then click on "Download Latest Version (via HTTPS, GitHub)" to install.
    *http://piro.sakura.ne.jp/xul/_tabkiller.html.en

  • My Itouch is stuck on a screen with a USB cable pointing to an iTunes symbol but when i try and connect to itunes it doesn't recognize it. I can't turn it off because my touch screen isn't working although my sleep button is, Help please?

    My iPod got slightly wet but only slightly. Could this have done it?

    Turn it off.  If it got wet somehow, you may try drying your ipod off.  The slow method would be a sunny window sill.  You could use a hair dryer on LOW, pointing it at the contacts.  When it drys out, charge itand try a hard-reset. If it still doesn't function properly....  ?

  • My ipod classic 160gb just stay on, I can't turn it off.

    My ipod classic 160gb just stay on, I can't do any operation on it, can't turn it of. I can't connect it to my computer. Also I tried to switch the lock button, then pressed the center button and menu button together, to restart it, but didn't work. IT JUST STAY ON!

    You need to press and hold down the Center and Menu buttons at the same time, until the Apple logo appears.
    Reset your iPod - Apple Support

  • Ipod screen lights up but is blank. can't turn it off. what can i do?

    ipod touch 4th generation screen light up but the screen is blank. we cannot turn it off. any suggestions?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Help! My ipod doesn't want to work!!

    The screen on my ipod touch 3G has turned black and has that "charging" circle on it..It's won't turn on or off,what do i do?? HELP!!

    Try these:
    iPhone and iPod touch: Frozen and unresponsive
    iPod touch: Hardware troubleshooting

  • Ipod doesn't want to work...

    I just got my ipod nano for Christmas and I let it charge for three days. Even though it says it's fully charged, it refuses to work without being hooked up to the computer or another power source. When I unplug it, it doesn't run like it should. When I unplug it, the screen freezes and refuses to shut off. I can't even restart it. I just got it! What do I do about this?
    Message was edited by: delfinachica78

    It sounds like your Nano is broken. You should return it for a replacement. If it was bought at a local store, take it back. If it was bought online, contact Apple via the support page.

  • I enabled radio on my iPod Touch 2G...now I can't turn it off

    I was breadboarding a microphone for my iPod Touch 2G using the headphone/mic jack as an input. I made a simple circuit to power the mics with an additional 2.4V (I suspected the PIP wasn't enough for the 4 mics I was using) but I left out the DC blocking caps on the audio out, and I plugged it into my ipod. I am a bad "engineer"; actually I'm not an engineer at all, I am a guesser and checker. well, now my recordings (with voice memos, blue fire, and epiphany) are all full of static. I thought I had burned something up, but I didn't know what; the mics are still solid (they work in my wife's identical ipod Touch). Then I tried recording again and again with just the PIP, no powering circuit, and when I listened to the static filled recordings I realized I can hear voices in the recordings. changing rooms in my house reveals these voices to be a country music station, and there is no country music on my ipod or being played within earshot of the mic. I can't change the station either.
    If it wasn't the added bias voltage (present for about 10 seconds), it could have been a long-term short in one of the mics. I didn't realize one of the mics was shorting out until the music player kept coming on in the middle of my recordings, so it may not have been the added voltage that did this- it could have been a short to ground of the mic audio contact.
    I understand that the bluetooth chip in these iPods has a radio tuner, and I believe I just accidentally activated it, one way or the other. But I want to record sounds through the mic, not radio, so does anyone have any ideas on how to re-disable the radio?
    Message was edited by: vtjonny

    Dave and Razor,
    I tried the hard reset but I haven't had time to try a full restore, thanks for the suggestion. I'll do it this weekend. I am tempted to just open this ipod up and physically disable the bluetooth chip, but I may just go ahead and make a line-in adapter and microphone preamp for the dock connector rather than go through the minijack.
    But if anyone can figure out how to tune this radio, its in there and definitely can be enabled...

  • TS1489 tried to update my phone, now it has frozen, with an apple on it and i can't turn it off

    I have a iphone4, i was updating itunes, now the phone has frozen, with an apple on the screen. It wont off and i cant use it. What do i do...?

    Try connecting the device to your iTunes library in recovery mode and restoring it.  Use the instructions in this Apple support document to place the iPod into recovery mode.
    iOS: Unable to update or restore
    B-rock

  • My friend put a password on my ipod and i cant get in how can i take it off?

    My friend put a password on my Ipod and I dont want to restore it but want the password off.  He wont tell me what he put it as and has probly forgot by now.  I am wondering how to take it off.  I am running an I touch software Ver 4.2.1.  I can get anywhere on it and know my way around my apple products well but cant seem to find out what to do on this problem.  Please help.

    If you were able to remove a pascode - what good would using a passcode do? None - that's what good it would do. You cannot remove a forgotten passcode.
    You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad/iPod.
    I assume that the concept is the same on the 2nd gen iPod.
    iOS: Wrong passcode results in red disabled screen
    This will tell you how to restore
    iTunes: Backing up, updating or restoring iOS software
    If you cannot restore that way, you may have to use recovery mode
    iPad: Unable to update or restore

  • Ipad1 sleep button doesn't work. Can't turn iPad off

    Is there a way to reboot my. Ipad1 from software?  My. Keep button stopped functioning over a year ago and I need to. Clear memory so things will work again.

    Mela1987 wrote:
    When I sync my iPad I am never able to complete the backup process. I leave it running for 12+ hours and it still only gets half way through or less (I have a 64Gb iPad with 49GB used). I have followed all the discussions in these forums and followed every suggestion from other people with this problem (deleted Zinio, use the correct cable, sync after restarting all machines, etc.), but nothing works. Now I just don't even expect my iPad to backup -- I just click the "X" to cancel backup and move to syncing.
    Is there a way to turn off backup so that iTunes doesn't even bother trying?
    Also, I foresee a problem when Apple releases the next OS update for iPad. OS updates make backup mandatory and last time it took 18 hours to backup and install the update. I can't go through that again!
    I don't think turning off the backup is the best way to go. When this happens to me, it is always a bad file. It's hard, but just watch what's happening, and you'll find out what the issue is. Once, it was a corrupted music file and another time was a bad App.

  • I have followed the step-by-step instructions to try and fix my iPod mini, but nothing is working.  It continually turns itself off and on, and in and out of disk mode. How do I fix this? please help!

    I havent used my iPod Mini in about a year, but last time I was on it worked.  I have tried almost everything.

    Sounds like your battery is failing. If you have AppleCare, make Genius reservation and take to Apple for resolution. If no coverage, you can still take to Apple Store for free quick battery diagnostic testing.

  • My buttons on my ipod 4th gen have stopped working how can i fix them

    can anyone help my ipod buttons have stopped working all except the home button what should i do

    Connect the iPod to your computer and restore from backup.
    If still a problem, restore to factory defaults/new iPod
    If still a problem then you likey have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • When I type in a search topic the system keeps recommending options. I do not want this - how do I turn it off

    When I type into the search engine, the system keeps receommending options. I do not want this. How do I turn it off?
    Thank you

    Options? Are you talking about search suggestions for the Search Bar?
    https://support.mozilla.com/en-US/kb/Search%20suggestions

Maybe you are looking for

  • FlexPMD maven plugin no longer useable with Maven due to imcompatible binaries?

    I am using Maven 2.2.1 with FlexPMD 1.2 and Flexmojos 3.7.1, with the maven-site-plugin 3.0 I get the following error: [INFO] [site:site {execution: default-site}] [FATAL ERROR] org.apache.maven.plugins.site.SiteMojo#execute() caused a linkage error

  • How 2 Increase the debug level in Source-qualtifier & workflow in informati

    Hi , I have a basic question related to the Informatica Debugging.After raising an SR. from the Oracle support guys I am advised to increase the Dubug level.Where and how do i do that ,please guide me. below is the brief note out of SR Please increas

  • How to reduce other size in iPhone memory?

    I recently plugged my iPhone 4 into my computer and it showed up that I have over 3GB of other data. I have only around 200 songs, 200 pictures, and 20 apps, all which are either games, came with the phone, or social media. I went to the store and th

  • Can I transfer a Raw Photo to PSE 9 with a direct link and keep changes

    I have limited expertise in all of this stuff so please understand. I recently upgraded to PSE 9 because I bought the Nikon D7000. Unfortunately I have had nothing but nightmares with the upgrade. PSE has eliminated BRIDGE and I can no longer open a

  • Future Dreamweaver Features

    I read the following article: http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402489&sliceId=1 And Adobe plans on removing ASP.net Server Behaviors?? How is a user supposed to connect to an Access Database without using Microsoft Expressi