HT1320 My iPad is froze and the home button is broke. What do I do?
My iPad froze as I tried to get out of a game, what do I do?
If it had froze, I have 2 ideas.
1. Wait after 3-6 days after frozen for battery to drain. After it had drained, recharge the iPad and restart it.
2. Wait until it turned off, then turn it back on.
Similar Messages
-
My ipod went black will not turn on and the home button wont work what do i do?
i need help!!!!!
Make sure it's charged.
Try to Reset your device:
Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off option that shows up first). -
My Ipod 5th generation won't turn on and the home button is broken. what do i do?
My iPod was working fine all day and then I locked it and when I came back to it, it would not turn on and it had almost a full battery. I have tried to plug it into it's charger but it still wouldn't turn on so I plugged it into the computer and that didn't seem to work either. I would try the method of holding down the home button and lock button down at the same time but my home button is broken (which I also do not know why it has broken). PLEASE HELP
Turn on without Home/Power Button
-
I need help, My ipod wont turn on, and the home button doesnt work, what do i do?
My ipod just shut off and wont turn on, i need help, but my home button is broken. can anyone help
Try:
Turn on without Home/Power Button -
i was doing a software update downloading ios 6.1 and the phone froze half way through the download i tried to restart the phone by pressing the power button and the home button but its just a apple on the screen. what can i do to fix this??
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps..
But... if the Device has been Modified... this will Not necessarily work. -
My ipad mini is frozen in an app and the home button is stuck. Pressing the wake/sleep button does not bring up the red slider to turn the ipad off. Is there any other way I can reset the ipad? Can I remove the battery? and then put it back in?
barbarafromnl wrote:
Can I remove the battery?
No the battery is non removable.
Try a Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons... -
my ipad with retina eye updated to IOs 7 not able to boot ....the normal way of pressing the sleep/wake button and the home button does'nt work....any ideas i think that IOs 7 is a crap cos form the time i loaded it it was shaky...now my ipad is dead
If it is one year old minus one day it is still under warranty. If it is more than a year since you purchased it then yes, the warranty has expired.
Millions of iPads have been sold. Most continue to function long after their warranty has expired. Check the many requests about updating the iOS on the original iPad on these forums and you'll see that there are many iPads still working after three years. My iPad 2, which I had for over two years is still working well for my son in law who took it over from me when I bought a new one.
Given that there will always be a few iPads that fail early. Most of those will be covered under warranty. But some will fail after the warranty has expired and before the owner expected it to. I'm sorry to hear that you are in this category. Take your iPad to an Apple store and have it looked at. They will provide you with alternatives, one of which is to purchase a like model to the one that failed at a discount. You can then know your options and make the best choice for you. -
i tried everything everyone told me,still doesnt work help with my problem please
If it has NEVER been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless. It is likely what you already tried but I want to be sure...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this. -
I have an iPhone 3Gs and it has froze on the apple logo. I have held the on/off button and the home button together but the apple logo keeps reappearing. What Can I Do?
Try plugging it into your computer, see if that clears it up or if you can perform a restore from your latest backup.
-
So , It was Late At Night And I Put My Ipad On The Chager , And When I Woke Up It Is Not Turning On , Or It Is Not Charging , I Tried To Reset It By Holding The lock button And The Home Button But It Is Not Working
Hello ipadisbroken,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Have a nice day,
Mario -
My iPad2 is four weeks old and the home button will not always close the application it is currently running and the problem is getting worse and I have tried to restore the iPad but this did not improve the problem...Is this a hardware problem that I need to seek a replacement
Your home button and power button are completely unresponsive, even when you attempt a hard reset? If so you will have to put into recovery mode and restore through itunes or possibly DFU if that does not work
-
Ipad2 won't shut down even when i press the sleep/wake button and the home button at the same time.
I can't shut down my ipad2 even when i press and hold the sleep/wake button and the home button at the same time.
If the screen appears to be zoomed in, then does tapping the screen with three fingers zoom you back out ? When zoom is on you should also be able to scroll around the screen using three fingers on the screen.
If you are seeing the keypad then that should be for the iPad's passcode, I assume that you have one set ? If the iPad is disabled then I wouldn't expect the keypad to show. -
my iphone blanked out and will not cut on i tried holding the power button and the home button any advice?
Hey there mello12,
It sounds like you are not able to turn on your phone. You should use these steps in the following article to help resolve it, or setup service if needed:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
Thank you for using Apple Support Communities.
Take care,
Sterling -
Where are the Lock Screen and the Home buttons on my iPad2
Where are the Lock Screen and the Home buttons on iPad2?
See here http://www.apple.com/support/ipad/
And here
http://manuals.info.apple.com/en_US/ipad_user_guide.pdf -
How do I fix my iPhone it keeps freezing on the pass code and the home button reset does not work
error 3194
I can't update my phone and I AM using the latest update of Itunes AND have restarted computer and followed everything. I'm to the point of booking an app't with the genius bar because I'm finding apples instructions and this latest update to be a complete waste of time.
Maybe you are looking for
-
Displaying date and time in filename,
hai to all, i need to take exp dump daily so i prefare to use scheduletask manager but i dont knew how to place the exp dump file name and its logs with their current sysdate and time while exp is taking part. for example: exp userid=........... file
-
How to check DFS replication status in windows 2008 r2 file server
Hi, I have created File server DFS namespace between 2 windows 2008 R2 server. namespace mode is 2008. I have copied 3 TB data on file server 1. now it is getting replicated from file server 1 to file server 2. till now the data is not fully replicat
-
Mail.app and IMAP does not change message in server
Hello all... I'm having a strange problem with Mail.app.. I have a IMAP server that uses pine-imapd. I can login and read messages, but anything I do with the messages to not change the message status on the server... If I read a new message, it rema
-
SQL Expression - RDO Connection
I have a SQL Expression in my report (CR XI) connecting to SQL Server via RDO. When I go to save the expression, it takes 10 minutes to resolve the expression. But when I connect via ADO, the expression is accepted in no time. Are there compatibility
-
Automatic pricing in Purchase Order from contract
Dear Experts, In a po if there is no contract available the pricing should be able to key in manually. is there any provisions to maintaining price list or any other method to get pricing automatically in to po? If there is contract exists, the prici