HT1320 my ipod says its disabled connect to itunes. what do i do
My iPod says its disabled connect to I iTunes what do I do
Hey enchanted.hands,
It sounds to me like this is for an iPod touch? If that's the case, you'll want to check out this article, which will guide you through how to fix it step by step:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
Regards,
Delgadoh
Similar Messages
-
i have an 8gb ipod touch that says its disabled connect to itunes but it is locked..when u connect it to itunes it tells you the passscode is incorrect so what do i do , would like to get it working with out losing everything on it if i can but if not i can redo it
Do as the manual says to do and restore the ipod.
If you are unable:
iOS: Unable to update or restore -
my phone just got repaired but i allowed for my niece to play with it but now its say iphone disabled connect to itunes what do i do
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps... -
If my iphone says iphone disabled connect to itunes what do i do?
If my Iphone 3GS says Iphone disabled connect to ITunes what do it do??????
Connect to iTunes and put iPhone in Recovery Mode to Restore. Open iTunes on computer, connect iPhone to computer with USB cable, hold both home and power butttons for about 20 seconds until iTunes recognizes iPhone in Recovery Mode, click Restore button of iTunes.
-
my ipod says connect to itunes permanently disabled i did and it says enter passcode on device. its not showing the slide board that brings up the psscode entry
iOS: Unable to update or restore - Support - Apple
-
HT4623 my iphone is saying iphone disabled connect to itunes what do i do?
my iphone is saying iphone is disabled connect toiTunes
what should i do?Then you're stuck. You MUST restore the phone using iTunes. Either talk to your school's IT department, find someone who already has it on their computer, or take your computer someplace where you can connected to another network that's not restricted.
-
HT4623 my ipod says its disabled conect to itunes how do inable it?
im having a problem with my ipod it says ipod is disabled an to conect to itunes. how do i enable it n fix this problem
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
My phone says iphone disabled connect to itunes, what do i do to get my phone back
Connect the iPhone to your computer and restore via iTunes. Place the iPhone in Recovery Mode if necessary to allow the restore.
For how to restore:
iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad -
hi, my daughter hers ipod touch is disabled connect to itunes after say its itunes couldnot connect to the "ipod touch" because its is locked with a passcode please help how to fix connect...i did turn off her ipod touch put usb back on there same in doenot say still ipod is disabled i dont understand please help how???
If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. iOS- Understanding passcodes
If you have forgotten your Restrictions code, then follow the instructions
below but DO NOT restore any previous backup. If you do then you will
simply be restoring the old Restrictions code you have forgotten. This
same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup. If you do not have a
backup to restore, then restore as New.
If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New. -
My ipod says its disabled try again in 22169500 minuyes. How do i fix
My ipod says its disabled try again in 22169500 minuyes. How do i fix
Place the iPod in Recovery mode and connect to your computer and restore via iTunes.
iOS: Wrong passcode results in red disabled screen -
ipod says its disabled try again in 22,598,148 minutes! What can i do to fix it?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
Ipod touch says its dissabled connect ti itunes but wont open up
ipod touch says its dissabled connect to itunes but wont open up
Try to connect in recovery mode, described here: http://support.apple.com/kb/HT1808
-
My iPod says "iPod is disabled connect to iTunes" What am I supposed to do????????? Can you help me out with this situation.
Place the iPod in Recovery mode and connect to your computer and restore via iTunes.
-
My new ipod says ipod disabled connect to itunes what is that
my new ipod says ipod disabled connect to itunes what do i do
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
Hi my friend gave me an iphone but on the screen it says 'iphone disabled connect to itunes
I have got an iphone 3 from my friend that had been used by his ex wife. The phone says ' iphone disabled connect to itunes.
She 'cant remember her passcode'
I have put the phone into restore mode and connected to itunes, ( i downloaded the latest edition ) but it says its going to take 3 hours to download software - its still downloading and then earlier I got an error code oxE800002D. I cant find the error code so dont know what it means.
I dont know if I am wasting my time trying to get it working or if it will be possible to get the phone in working order ( with lots of help from you all :-) )
Any help or advice will be gratefully recievedThanks.
I did this and moved on a little but now am getting error code 3194.
i looked on the support site but dont really understand
Any ideas ?
Maybe you are looking for
-
How do you access updates to apps from the App store after changing to a new ID because the password on the old ID was changed by the former husband and you don't know what it is now? And you set up your own new ID and account but can NOT access the
-
Nothing worst than a stupid company that can't fac...
I needed urgently an online number. Come to this "company" of scammers an get a number. To get the money: 2 seconds. To have the number working: endless... To contact customer service: impossible! It does not exist!! if I would have known... At the e
-
Obtaining BPEL activity duration instead of timestamp
Hi, I've created activity sensors relevant to the scopes in the BPEL process. The evaluation time is set to 'All'. The attached sensor action publishes instanceId and the activity duration obtained from the XPath expression 'actionData/payload/activi
-
hi I developed an applet and it prints out a value.I m using zebra printer.problem is about layout.can you help me about aligning this value on the paper.it s ok on applet window value is in the center of window but when I print out it doesnt properl
-
If my SLD is down will webdynpro apps fail.
I see that the SLD manages the JCO connections to R/3. Does the engine maintain that data locally as well or if the SLD is down then the webdynpro app utilizing the JCO connection is down as well.