HT1331 Please help Windows user find disk on network...I'm stumped

I'm running Windows Vista and Windows 7 on another PC. Neither can even connect with the AIrPort Extreme by typing 10.0.1.1 in my browser. It shows up fine with AirPort Utility, it's IP is in fact 10.0.1.1. Internet works, file sharing from PC to PC works. I tried turning off the firewall, tried all the suggestions on this site as well.
Because 10.0.1.1 doesn't work in my browser I can't even get to the step of mounting the drive via Map Network Drive since it won't recognize 10.0.1.1 let alone \\10.0.1.1\My Book\.
Using Airport Utility and choosing Disk I can see the disk just fine, it's just not accessable via the network.
I'm connected to the internet via a DSL modem and my basestation is the PPPoE client set to be a DCHP server.
Also, I can ping 10.0.1.1 no problem.
Please help. I'm stumped.
Thank you.

I got a hold of a Mac and when I typed \\10.0.1.1 in it's browser it crashed Safari every time. So that didn't get me far.
You do not open network resources in a browser.. you do not use double backslash in any OS except windows..
To open the TC disk in Mac OS.. just open finder..
The Time Capsule should list in finder under shared.
It is automagical.. but if you do need to open it.. use the Go .. Go to Server in the top menu of finder and type AFP://10.0.1.1
Or SMB://10.0.1.1
If you still have the Mac available please try again. If it does not show up in finder.. even if the disk shows up I think you have formatted it wrongly.
Exactly what format is the disk?? TC has very limited formats it can read.. basically FAT32 and HFS+..
Please plug the disk into the Mac and format the disk HFS+.. you can still write to it from a PC on the network. HFS+ is far superior format to FAT32.
Once the Mac can read it connected to the AEBS then the windows computers can work. without the Mac working the PC will never see it.

Similar Messages

Please help me to find out windows 7 home premium product key

Please help me to find out windows 7 home premium product key .My windows product ID is 00359-OEM-XXXXXX-XXXX
my pc have sticker but is damage ...only can see last is -RXWJ8-XXXXX

Hi,
Please don't disclose any product key information in here. This is public and open place to discuss Windows 7 problem. It's dangerous for any personal information.
Also, since the Windows is brought with OEM computer, maybe you could try to contact the manufacturer for help.
Karen Hu
TechNet Community Support

Can anyone tell me how to get rid of tlb search? it unfortunately entered into my mac. Whenever I use safari, a pop-up window opens with some ads. Please help me to find a way to remove this malware.

Can anyone tell me how to get rid of tlb search? It unfortunately entered into my mac. Whenever I use safari, a pop-up window opens with some ads. Please help me to find a way to remove this malware.

You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Please help me to find.. compaq presario f762au sound driver for window 7 32 bit.

please help me to find.. compaq presario f762au sound driver for window 7 32 bit..
This question was solved.
View Solution.

Hi,
It does not make any sense. Based on its support page, it uses "Conexant HD-Audio SmartAudio 221 Driver" for Vista
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=2093&lc=en&cc=us&dlc=en&sw_lang=&product=3689...
and now it can't see for Windows 7:
   https://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&dlc=en&softwareitem=ob-75899-1
Please try the following methods:
   http://windows.microsoft.com/en-US/windows/help/no-sound-in-Windows
   http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01912228&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED"

HAI EVERYBODY,
PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED" during the material master replication by using middleware parameters.
step1 : i have taken SRM client 810 and named it as CHINNISRM
step2 : i have taken r3 client 810 and named it as CHINNIR3
step3: During material master replication i maintained tables like crmconsum,crmrfcpar,crmparoltp in r3 and smofparsfa in srm client and filtered the objects and loaded the objects through r3ac3,r3ac1,r3as.
step4 : And later i have checked in r3 queues to activate the objects,but i have seen a message like "LOGICAL SYSTEM CHANGED:SEE 588701".according to the oss instructions i have checked in CRMPRLS table in se16 in R3 .there i found out there is one logical client named with T90CLNT810.
oss :588701
Solution
There are different cases in which different forms of processing are
required or where several options exist:
- The logical system name of an R/3 Backend client was changed in
current operation. In this case, the data hangs in the outbound
queues of the R/3 Backend system as specified under point 1 of
the symptom. In this case, the logical system name must be
changed back to the original value. Then the outbound queues
can be reactivated. If no data was transferred to the EBP/CRM
server before the change, also a correctioin of the check table
is possible.
- The same logical system name was used again in a new client of
an R/3 Backend system that was linked to the EBP/CRM server. In
this case, the data is in the inbound queue of the EBP/CRM
server with the exception GUID_FOR_LOGSYS_CHANGED. In this
case, the queue entries which have status SYSFAIL must be rejected, however, not the entire queues. If the new client of the R/3 Backend system you have linked has exactly the same
data as the old client and if it is meant to replace the old
client (that is, this was deactivated), also a correction of
the check tables is possible. In this case, the inbound queues
can be reactivated after the correction.
oss:765018
1. If the situation in your system corresponds to the situation described
under "Reason and Prerequisites" and if symptom 1 occurs, you can
delete the table entry from table CRMPRLS table (there is just one
entry). Since there is no maintenance dialog for this table and you
cannot maintain it using transaction SE16, you must use a report to
delete it. This report is attached to this note as correction
instructions.
Create the report ZZ_DELETE_CRMPRLS in your system and copy the source
code from the correction instructions. You cannot implement this
source code using transaction SNOTE.
You can use the report in every plug-in or plug-in basis system, even
if it is not specified in the validity section.
After you have run the report, you can trigger existing queues again
in transaction SMQ1.
2. If the situation in your system corresponds to the situation described
under "Reason and prerequisite" and if symptom 2 occurs, you can
delete the entry from table CRMMLSGUID (there is just one entry).
Since there is no maintenance entry for this table and you cannot
maintain it using transaction SE16, you must use a report to delete
it. This report is attached to this note as correction instructions.
If they do not yet exist, add the following messages to message class SMOF in your logon language:
Message Message short text
303 User &1 is not allowed to change table &2.
304 User &1 IS not allowed to display table &2.
305 Logical system &1 was not found in table &2.
306 System error! The current client was not
found in table T000.
Create the report ZZ_DELETE_CRMMLSGUID in your system and copy the
source code from the correction instructions. You cannot implement
this source code using transaction SNOTE.
You can use the report for every release of the CRM system, even if it
is not specified in the validity section. The only exceptions are CRM
releases with Support Package versions that are too low such as CRM
Release 3.0 with Support Package 12.
After you have run the report, you can trigger existing queues again
in transaction SMQ1 of the R/3 back-end system or transaction SMQ2 of
the CRM system.
so what should i do to do the replication.please suggest me .untill and unless i solve my problem i cant move to the further activity.i hope you people can solve my problem.thanks in advance.
thanks and best regards,
n.chakradhar

Hi chakradhar,
Did you find a solution to your issue? We are facing a similar issue and looking to figure out how this can be resolved.
BR// 420

My mobile phone is lost, please help me to find the serial number is: DNQKDBS8F8H4, my name is Yu Fan, thank you very much for this is my number: 15052995201

My mobile phone is lost, please help me to find the serial number is: DNQKDBS8F8H4, my name is Yu Fan, thank you very much for this is my number: 15052995201

We're not Apple here. We're users. We cannot locate your phone any more than you could locate ours.
If you did not have find my phone activated on your device, there's no way to track it.

I am not sure that I deleted Iphoto, but Iphoto desapeared. I don't have original disc. Can you, please help me , to find it somewhere on my mac?

I am not sure that I deleted Iphoto, but Iphoto desapeared. I don't have original disc. Can you, please help me , to find it somewhere on my mac?

The iPhoto application should be in your applications folder
If you have removed it and your computer came with restore disks then you will need them to reinstall. Or you can purchase a version on DVD or from the App Store. Apple my be able to reace missing restore disks for a nominal charge
LN

Please help me to find my iPad and iPhone 5C. I lost all of them last night. I set up icloud for my devices but i can't find them because they were not connect to the Internet. Please guide me other ways to find my "best friends".

Dear Apple,
Please help me to find my iPad Air 2 64 GB and iPhone 5C 8GB. They're in IOS 8.0 maybe...I lost all of them last night. I set up icloud for my devices but i can't find them because they were not connect to the Internet. Please guide me other ways to find my "best friends". They're very important to me. Many important files for my job in here and it has sentimental value to me. My boyfriend gave it for me so i don't want to lose them. And because i just lost my iPad Air last 3 month, and now i just bought iPad Air 2 two months ago. I'm so sad and lost. I want to catch the thief to the police so bad because they keep my bag and many other important things. I can not do anything without them. Please help me and contact me via my email or my phone. Thank you very much. Hope to receive your answer soon.

Hey there thaovy309,
Welcome to Apple Support Communities.
The linked article below provides a lot of great information and suggestions that should address your concerns about your data and finding your lost or stolen iPhone 5c and iPad Air 2.
If your iPhone, iPad, or iPod touch is lost or stolen - Apple Support
Take care,
-Jason

Need driver for canon mg 5250 as scanner is not working with version 10.7. Can you please help me to find the driver so scanner works with WIFI?

need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?

Try with the latest Apple driver package for Canon (released 15th Feb):
http://support.apple.com/kb/DL899
This solved my problem with the printing.

HT1937 I would like to help me. My iPhone was lost and stolen and I didn't have configured Find My iPhone. So I could n't find it. Please help me to find it or delete my information and photos. This is my serial No: DN*****TWD. Thank U

I would like to help me. My iPhone was lost and stolen and I didn't have configured Find My iPhone. So I could n't find it. Please help me to find it or delete my information and photos. This is my serial No: DN*****TWD.
<Personal Information Edited by Host>

If you didn't set up Find My iPhone, there's nothing we can do to help you. Sorry.

I need to swich from us store to saudi arabian store, please help me to find solution.

i need to swich from us store to saudi arabian store, please help me to find solution.

See > Change your iTunes Store country
Here > http://support.apple.com/kb/HT1311

Please help me in finding link to downlaod oracle BI discover

Please help me in finding link to downlaod oracle BI discover
i didnot find discover in obiee so where can find
Thanks in Advance

Hi,
Discoverer is part of BI Standard Edition. You can down load BI from here. You need the 2 CDs for Discoverer Plus and Viewer and the Tools CD for Discoverer Admin and Desktop.
You should also apply the patches to go to the latest version. The LearnDiscoverer blog has details of the latest patches.
Rod West

Why is my ipad doesnt have a software update?please help,i cannot find it.. :(

why is my ipad doesnt have a software update?please help,i cannot find it..

The ipad 1 (no camera) can't be updated beyond IOS 5.1.1.

Please help me to find out how to turn off the shuffle feature on my touch i-pod, Please help me to find out how to turn off the shuffle feature on my touch i-pod

Please help me to find out how to turn off the shuffle feature on my I-pod nano ... THANK YOU!!!!!! :)

Just figured it out :) Thanks though!!!

I lost my Touch I pod. Please help me to find it.

Please help me to find my i pod.

Is your iPod online or offline? If it's offline or physically turned off; no power. Your only option is to physically go look for it. If your online and you set up find my iPhone with iCloud you should be able use that to help you, BUT if you did not set this up before you lost the iPod, I believe your back to physically go look for it, sorry. Good luck.

HT1331 Please help Windows user find disk on network...I'm stumped

Similar Messages

Maybe you are looking for