HT1335 NOTHING happens when I connect my ipod nano 6th gen and PC!!

I just got an ipod nano 6th gen, and when i plug it into my PC my computer makes the sounds it always makes when you plug something in, but my computer/itunes doesn't reconized my ipod!!! Help??

Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

Similar Messages

  • When I connect my iPod nano 7th gen. to my computer and open itunes, there is a message that says the iPod could not be detected. Does anybody know how to fix this issue?

    When I connect my iPod nano 7th gen. to my computer and open itunes, there is a message that says the iPod could not be detected. Does anybody know how to fix this issue?

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4. Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job.
    7. Check for third-party software conflicts.

  • I can't connect my iPod nano 6th gen to iTunes 11.1.

    I can't connect my iPod nano 6th gen to iTunes 11.1. It keeps saying 'it could not be identified properly". I've tried all the steps on troubleshooting page but nothing's successful. Anybody got some help?

    I found I had the same problem so I uninstalled iTunes, Apple Mobile Device Support, and Apple Application Support and then redownloaded the latest version of iTunes which reinstalled everything I uninstalled and I was able to sync my 1st Gen iPad and my 3rd Generation Nano with iTunes 11.1

  • I get error message''one file not found'' when tring to sync Ipod Nano 6th gen to I tunes. Help

    I get error message''one file not found'' when tring to sync Ipod nano 6th gen to Itunes. Help

    See:
    iTunes cannot sync... apps not determined installed on...: Apple Support Communities
    installed apps could not be determined...: Apple Support Communities

  • Got a refurbished iPod Nano 6th gen, and went to connect it to my PC,

    Got a refurbished iPod Nano 6th gen, and went to connect it to my PC, it said it was configured to Mac and went to restore it and install software. Now shows white screen with little computer icon and warning sign. won't reset

    By a reset, I assume you mean pressing and holding both the Sleep/Wake and Volume Down buttons together long enough for the Apple logo to appear?
    Can you try and force the Nano into Disk Mode and then connect it iTunes and restore it again?
    Putting iPod into Disk Mode
    B-rock

  • I rencently bought an ipod nano 6th gen and its an 16gb but it does let me downlaod many music i only have 353 songs and nothing elsewhat should i do

    i rencently bought an ipod nano 6th gen and its an 16gb but it doesnt let download much music as it suppose to and only have about 353 songs and i dont have any files on others.what should i do

    How many songs it will hold depends on the format and length of the songs.

  • I just got a ipod nano 6th gen, and ive been using it for 2 days, and it seems that the battery just lasts about half a day, on playing 1 to 3 songs in intervals of 1-2 hours. Whats wrong with my ipod?

    I just got a ipod nano 6th gen, and ive been using it for 2 days, and it seems that the battery just lasts about half a day, on playing 1 to 3 songs in intervals of 1-2 hours. Whats wrong with my ipod?

    Your nano would really have nothing to do with it at that point. It is really something between iTunes and whatever server out there on the internet that it is trying to connect to for the update.
    Try posting this one in the iTunes forum, they might have a solution for you.
    i

  • Clicking Sound When Listening to Audio iPod Nano 6th Gen

    When I am listening to a few tracks on my iPod Nano 6th gen, there is a faint clicking sound that I can hear throughout the songs. The songs play fine on my PC with no clicking sound, but only on the nano can it be heard.

    Repair permissions and restart your computer.

  • Ipod nano 6th gen and bluetooth

    How do I connect my ipod nano 6th generation to a blutooth adapter so I can use wireless headphones?

    You buy a bluetooth adapter that is compatible with a 6th Generation Nano.

  • When i connect my iPod nano 4th gen. to my PC, it shuts down, restarts and says "restore via iTunes" or it completely deletes all my music. What to do?

    I know my iPod is an oldie, but maybe someone can help
    I restored it 10-times, but it isnt working.
    The Problem just happens, if i connect my iPod to a USB-30-pin cable, not when i connect it to my dockingstation.
    I have the newest iTunes Version, newest Windows 7 Update and the newest IPod-OS.
    Help me please ;(

    iOS: Device not recognized in iTunes for Windows - http://support.apple.com/kb/TS1538

  • When i connect my ipod nano 2nd gen, it charges but does not appear in windows or itunes.  I tried the reset but it didn't work.  how can i fix this?

    I bough a 4g Ipod nano 2nd gen for my cousins birthday.  When i plug it into my computer it charges but does not show up in windows or itunes.  I tried reseting it, reinstalling itunes, everything the site said but it didn't help. I am trying to sync songs to it for my cousin, but it won't work with it not connecting.  Could the wire have something to do with it or is there a bigger problem here?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with             
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • HT1476 sos, nothing happens when I connect the ipod touch to the laptop. No charge, no turn on.  any clue?

    The I pod has gone blank and when I connect the USB wire to the laptop, nothing happens.  no sound, no power to turn on the I pod.
    how do you know if the battery is at life end.  We just got this within a year.
    please help.
    thanks

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • Error message keeps showing on my itunes that my ipod is in recovery mode that needs to be reset whenever i connect my ipod nano 6th gen

    tried several times to restore my nano via itunes and still keeps on saying that it needs to be restore since its on recovey mode, what do i do next?

    Are you really running Windows 98? I sure hope not. :S
    I have noticed a few others with the same problem the past couple of weeks. Many of them were able to resolve the issue by doing a low level reformat of the iPod's flash storage using the instructions in this article.
    http://www.methodshop.com/gadgets/ipodsupport/erase/
    B-rock

  • IPod Nano (6th gen) and Technogym treadmill

    Hi,
    I have a 6th gen iPod Nano and I have been using it with nike+ for a while. In particular, I have been using the transmitter plugged in the ipod and the sensor in my nike shoe to track my running data and eventually upload it to nikeplus.com. Hence, I have one sensor linked.
    Today, I went to my local gym and saw a Technogym treadmill with a big touchscreen and a possibility to dock an ipod. (I assume that the model of treadmill is a couple of years old, because it had a TV, fan, ipod support, etc., but no internet support. Here is the image of the exact treadmill - http://cityfitness.lv/upload/IMG_0452.JPG).
    Moreover, I plugged in my 6th gen ipod nano. Set up and started a 5k run on the technogym treadmill. My ipods music was accessible on the technogym instantly. Also, I saw that during the workout the ipod's screen showed "Nike+. Workout data is recording" or something like that.
    I did the 5k and finished the workout. I unplugged the iPod nano but my workout did not appear under Fitness - History. When I got home, I connected the ipod to iTunes, and the ordinary-afer-a-workout popup asking whether I want to send workout data to nikeplus appeard. I clicked yes. BUT, again, nikeplus.com does not show my technogym workout and neither does itunes.
    The only thing appearing in iTunes, is a new sensor. Its name is "Gym User 1" or something like that.
    So the question is. How can I get my 6th gen iPod Nano to fully work with technogym treadmill?
    Thanks,
    Reinis

    Hello mark0198,
    I'm afraid not. Your computer must meet the minimum requirements.
    Mac computer with USB 2.0 port, Mac OS X v10.5.8 or later, and iTunes 10 or later
    B-rock

  • HT1399 I just downloaded the newest version of itunes, and when I connect my ipod nano (3rd gen), I can no longer see my playlists (on the left hand side). I hate the new format...any way to revert back to the old one?

    I just downloaded the newest versionof itunes. Now when I plug in my ipod, I can no longer see my playlists (listed on the left hand side). The new format is very confusing! How do I drag and drop songs into specific playlists I have?  Is there a way to revert back to the old itunes?

    I had the same question. Someone answered perfectly here post https://discussions.apple.com/message/20575126#20575126
    The answer was click View > Show sidebar. Devices and playlists will display in the left sidebar once again.

Maybe you are looking for

  • How to connect Macbook to TV but have reverse picture?

    I'm not sure how clear my subject is, but basically here's what I want to do. I know how to connect my macbook to the TV and have my macbook screen show up on my TV screen. I want to reverse that, I want what's on my TV to show up on my mac screen so

  • New apps won't install, just bouce in the dock and time out

    Was wondering if anyone could help me out with this. I'm in Japan and apple support in English seems to be manned by one guy whose only solution to any problem is to backup everything and reinstall. Getting kind of frustrated. Lately, I am unable to

  • Can I enter Credit Card for iTunes account on web?

    I just created an iTunes account recently for my son who has an iPad.  He'll be using this to purchase apps.  He has the iPad and also his Mac which has iTunes on it.  I want to be able to enter my credit card information into his account so that any

  • Airplay with Apple TV not what it used to be

    Before iOS 8 I was able to stream from the iphone to Apple TV without using the mirroring toggle. The icon used to show up in the video screen down on the bottom right corner. Ever since the update, its gone and I have to mirror the phone which doesn

  • Generic Connection Framework Optional Package for J2SE

    i have learnt that the Generic Connection Framework Optional Package can be used to make J2SE able to use J2ME classes. However, how can i implement the package so that i can do so. Thank you for your advice.