HT1338 Can anybody help with a very slow computer?

My MacBook Pro is running VERY slowly. I use primarily Word and have built up a huge number of files, like 500,000. Still have plenty of memory, however. Occasionally, I get the spinning color wheel when I'm on Word, the system freezes and I have to shut down. How do I "defrag" or clean up the files? Not sure which operating system, but it's a 2010 MacBook.

Can you tell us how much RAM (Memory) you have? It's listed by clicking on the  in your title bar....go to About This Mac and it's in the 1st window.
We would also like to know what size hard drive you have and how much free space is on it.
If you click on your Hard drive icon (should be upper right hand corner of your screen), or the Finder in your Dock...when the window opens it says at the bottom how much Free Space you have on your drive.
If you go to the , click on About This Mac, click on More Info... in that window. The next window says how big your hard drive is under Hardware....click on Serial-ATA.....look under Capacity:
We need to know this cause if a hard drive is too full it slows things down and creates operational difficulties.
DALE

Similar Messages

Can anyone help with a very slow iMac?

I'm getting increasingly frustrated by this computer, it takes an age to start up and then the processor makes it's noise for quite some time before allowing me to do anything. Often the beachball is whirling around too. I'm pretty useless when it comes to computers. I ran the etrecheck software and have this info from it. Can anyone offer any suggestions please?
Problem description:
very slow start up and slow to respond. Processor seems to be working a lot
EtreCheck version: 2.0.11 (98)
Report generated 24 November 2014 19:11:43 GMT
Hardware Information: ℹ️
iMac (20-inch, Early 2008) (Verified)
iMac - model: iMac8,1
1 2.66 GHz Intel Core 2 Duo CPU: 2-core
2 GB RAM Upgradeable
BANK 0/DIMM0
1 GB DDR2 SDRAM 800 MHz ok
BANK 1/DIMM1
1 GB DDR2 SDRAM 800 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI Radeon HD 2600 Pro - VRAM: 256 MB
iMac 1680 x 1050
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 16 days 11:58:6
Disk Information: ℹ️
WDC WD3200AAJS-40VWA1 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (29.23 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
HP Photosmart C5200 series
Apple Inc. Built-in iSight
Samsung M3 Portable Samsung M3 Portable 500.11 GB
S.M.A.R.T. Status: Verified
Timmy Teabags (disk1s1) <not mounted> : 500.11 GB
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
[not loaded] com.maudio.usb.keystudio49i.driver (1.8.1) Support
Startup Items: ℹ️
M-Audio Firmware Loader: Path: /Library/StartupItems/M-Audio Firmware Loader
Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Agents: ℹ️
[failed] com.apple.AirPlayUIAgent.plist
[failed] com.apple.bird.plist
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.cmfsyncagent.plist
[failed] com.apple.EscrowSecurityAlert.plist
[failed] com.apple.pluginkit.pkd.plist
[failed] com.apple.printtool.agent.plist
[failed] com.apple.sbd.plist
[failed] com.apple.scopedbookmarkagent.xpc.plist
[failed] com.apple.security.cloudkeychainproxy.plist
[failed] com.apple.spindump_agent.plist
[failed] com.apple.telephonyutilities.callservicesd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.AssetCacheLocatorService.plist
[failed] com.apple.awdd.plist
[failed] com.apple.coresymbolicationd.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.diagnosticd.plist
[failed] com.apple.icloud.findmydeviced.plist
[failed] com.apple.ifdreader.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.periodic-daily.plist
[failed] com.apple.periodic-monthly.plist
[failed] com.apple.periodic-weekly.plist
[failed] com.apple.sandboxd.plist
[failed] com.apple.softwareupdate_download_service.plist
[failed] com.apple.spindump.plist
[failed] com.apple.tccd.system.plist
[failed] com.apple.wdhelper.plist
[failed] org.cups.cupsd.plist
Launch Agents: ℹ️
[running] com.m-audio.keystudio49i.helper.plist Support
[invalid?] com.maintain.CocktailSystemEvents.plist Support
[invalid?] com.maintain.PurgeInactiveMemory.plist Support
[invalid?] com.maintain.Restart.plist Support
[invalid?] com.maintain.ShutDown.plist Support
[running] com.maintain.SystemEvents.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.maintain.HideSpotlightMenuBarIcon.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.rogueamoeba.hermes.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items: ℹ️
iTunesHelper UNKNOWNHidden (missing value)
Spotify Application (/Applications/Spotify.app)
Google Drive Application (/Applications/Google Drive.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 7 Update 71 Check version
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 10.1.12 Support
AdobePDFViewer: Version: 10.1.12 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Musicnotes: Version: 1.17.3 Support
iPhotoPhotocast: Version: 7.0
3rd Party Preference Panes: ℹ️
Flash Player Support
Java Support
M-Audio KeyStudio49i Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 319.21 GB Disk used: 289.98 GB
Destinations:
Studio External [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Too small
Backup size 0 B < (Disk used 289.98 GB X 3)
Top Processes by CPU: ℹ️
      3% WindowServer
      0% AppleSpell
      0% fontd
      0% notifyd
      0% Google Drive
Top Processes by Memory: ℹ️
88 MB Mail
43 MB Spotify
30 MB mds
28 MB mds_stores
28 MB iTunes
Virtual Memory Information: ℹ️
271 MB Free RAM
456 MB Active RAM
500 MB Inactive RAM
400 MB Wired RAM
34.73 GB Page-ins
1.65 GB Page-outs

You only have 2GB of RAM, which is not enough to run OS X 10.10 smoothly (it's the bare minimum requirement to run it at all). Consider buying more at http://eshop.macsales.com (there are other vendors as well). Find the correct RAM for your model by searching for your iMac's model identifier - iMac8,1. Also look at their installation videos.
You have several failed Apple launch agents, you may need to re-install OS X to fix that. Boot the computer while holding down the Command ⌘ and R keys at the same time. This will boot to the Recovery partition. Choose the reinstall OS X option.

Can anybody help with this........I've bought a pack of self adhesive lables with a view to printing them via my printer, However, I can't find a programme that allows me to do this. Personnel in the MAC shops don't know either!! I've a IMAC running on

I've bought a pack of self adhesive labels that I wanted to print up on my IMAC,running on Snow Leopard. However, I can't find a programme that will do this, nor can the personnel in the MAC shops. The labels are stuck on a normal sheet od A4, and I just want to print addresses on them. Can anybody help?

Are they Avery Labels? If so there are templates here:
http://www.avery.com/avery/en_us/Templates-&-Software/Templates

Can anybody help with some subtleties to this code?

Hello,
I was wondering if anyone could take a look at the code in general for me, which is to go in an 'effects' pedal. The first while loop is for a footswitch that either reads high or low. It controls the mode of the pedal. the first mode is the default, where no signal manipulation occurs, and what comes in the audio input just comes out; the second mode stores data (fundamental frequency, average FFT amplitude from 3 kHz to 5 kHz) from the E string of a guitar, which is plucked after that mode is actuated; the third mode does the same for the A string; and the final mode takes in a note on the E or string, recognizes it as either on the E or A string, and adjusts the frequency content to be in tune based the data stored in modes 2 and 3. then the new magnitude vector is put through an inverse FFT and output through the DAC and sounded.
What I'm curious to know is, are there any blatant errors I've made? Will the signal coming out of the inverse FFT be sounded through the DAC? does it need to be changed from a double to an I32? I am trying to debug, but right now I'm having problems getting the correct output voltages on the Blackfin (the SPORT 0 pinout doesn't seem to match what is on the board....).
also, I was wondering if I will lose any phase information on the signal that I get out compared to the signal I put in. Will it be detectable by ear? Or would it all sound the same? along with the phase change for some signals, using an inverse FFT resulted in a loss of amplitude (from about 1 to on the order of 10^-5. that's a lot!). but when the test program was played on my computer, the phase change was not noticeable from the output signal, and neither was the magnitude change! the output played at the same volume as in the input, despite the waveform chart on the front panel showing an amplitude five orders of magnitude less! can you help explain that to me? what can I do, will it matter coming out of the Blackfin and into an amplifier?
i appreciate any input anyone can give me on all this!! thank you!!
Attachments:
102 project.vi ‏287 KB

Hi noahgrant,
I've had a look at your vi and can make some suggestions that you can try.
From what I can see, your while loop with the wait timer of 100 ms and continue if true condition on it (we shall cool this loop 1) will always keep running.
The other while loop (loop 2) is nested within a couple of case structures and will only run once (false to a continue if true condition). The default case has a different condition and will always run, instead.
From what I can make of this, loop 2 and all its case structures will only run once (except for case 0, default). WHEN it runs will depend on how it was compiled on the Blackfin - case structure/loop2 may go first or loop 1 will go first.
If you want loop 2 to go first (and only go once) then you need to link the output of the case structure to the input of loop 1 - this can be done by simply wiring up a boolean to it (data flow rules).
If you want loop 2 to always be checking the status of the mode then you need to place the whole case structure within a while loop, to run continuously.
That is a very quick interpretation of what you are trying to do. There are a lot of question marks (missing vi's) and some heavy use of local variables. I would consider using sub-vi's, in particular functional global variables (FGV's).
I hope that helps.

Help with a very slow sql statement

Hi this statement takes 10 seconds to run and is run a lot, can anyone help me speed it up.
Each section in itself is quick but when i add the IN section it slows down, probably because there is 20291 rows in the view v_allitems.
anyone know how i can speed up?
select ITEMTYPE,
ITEMID,
NOTESID,
NOTES,
DUEDATE,
OPENDATE,
SUBJECT,
TYPE,
STATUS,
OWNER,
CREATEBY,
CREATEDATE,
ITEMCODE
FROM v_allitems
where
ITEMCODE in ( 'ACT,'||4264) OR ITEMCODE IN
(SELECT pcchildcode
||','
|| pcchild item
FROM afpc
CONNECT BY pcparent = prior pcchild
AND pcparentcode = prior pcchildcode START
WITH pcparent = 232
AND pcparentcode = 'CAS'
UNION ALL
SELECT pcparentcode
||','
|| pcparent item
FROM afpc
CONNECT BY pcchild = prior pcparent
AND pcchildcode = prior pcparentcode START
WITH pcchild =4264
AND pcchildcode = 'ACT'
)

Something to just try i guess (wild guessing here).
WITH
   itemcodes AS
   SELECT
      DISTINCT ItemCode
   FROM
      SELECT 'ACT,' || 4264 AS ItemCode
      FROM DUAL
         UNION ALL
         SELECT pcchildcode || ',' || pcchild item AS ItemCode
         FROM afpc
         CONNECT BY pcparent       = prior pcchild
         AND         pcparentcode   = prior pcchildcode
         START WITH pcparent       = 232
         AND         pcparentcode   = 'CAS'
            UNION ALL
         SELECT pcparentcode || ',' || pcparent item AS ItemCode
         FROM afpc
         CONNECT BY pcchild     = prior pcparent
         AND         pcchildcode = prior pcparentcode
         START WITH pcchild     = 4264
         AND         pcchildcode = 'ACT'
SELECT
   v.ITEMTYPE,
   v.ITEMID,
   v.NOTESID,
   v.NOTES,
   v.DUEDATE,
   v.OPENDATE,
   v.SUBJECT,
   v.TYPE,
   v.STATUS,
   v.OWNER,
   v.CREATEBY,
   v.CREATEDATE,
   v.ITEMCODE
FROM v_allitems v, itemcodes i
WHERE v.ItemCode = i.ItemCode;Assuming (probably a good assumption) that's not good, how long does this query take to finish for you?
         SELECT pcchildcode || ',' || pcchild item AS ItemCode
         FROM afpc
         CONNECT BY pcparent       = prior pcchild
         AND         pcparentcode   = prior pcchildcode
         START WITH pcparent       = 232
         AND         pcparentcode   = 'CAS'
            UNION ALL
         SELECT pcparentcode || ',' || pcparent item AS ItemCode
         FROM afpc
         CONNECT BY pcchild     = prior pcparent
         AND         pcchildcode = prior pcparentcode
         START WITH pcchild     = 4264
         AND         pcchildcode = 'ACT'

Can anybody help with problems with Mail & Backup, please?

Hi, yesterday, for some reason, a problem developed with Mail.
Without me changing anything, while it will send and receive e-mails through my Apple account, it has stopped downloading emails from my BT account, which previously worked fine.
It keeps trying to log on to collect them (the rotating gear wheel beside the account operates) but nothing downloads. It is not the BT account which is at fault, since my iPhone, which is synched to the computer, downloads them fine.
Also, while I had been regularly getting advice from Backup that my storage disk was full and it was deleting an old backup, today Backup has told me that the disc is full and the backup has failed.
I cannot see anything in Settings which could obviously account for these changes.
i am a pretty new Apple user (a conversion I cannot claim has been a great success so far, and I would be grateful for any help you can provide.
Many thanks,
Neil

Export the folders/mailboxes and put them in the other users Public folder or go to the hard drive level user and put them in the Shared folder. You may have to reset permissions using Get Info (command - I). The other user can them import them.

I am trying to use GoDaddy's gdform.php for a form mailer in Flash CS4. Can anybody help with coding

Hello Everyone,
I am starting to learn Flash and created a form mailer for a website I am working on. The following code is what I have in AS3.0 and it all loads fine in the web browser, but I do not receive the email with the info.
var address:String = "gdform.php";
var url:URLRequest;
var variables:URLVariables = new URLVariables ();
variables.subject = "New Fighter Profile";
submit_btn.addEventListener(MouseEvent.CLICK,sendForm);
function sendForm(event:MouseEvent):void{
    variables.FirstName = firstname_txt.text;
    variables.LastName = lastname_txt.text;
    variables.Birthdate = birthdate_txt.text;
    variables.Nickname = nickname_txt.text;
    variables.HeightFt = hft_txt.text;
    variables.HeightIn = hin_txt.text;
    variables.Weightclass = weightclass_txt.text;
    variables.RecWins = wins_txt.text;
    variables.RecWins = losses_txt.text;
    variables.Debut = debut_txt.text;
    variables.Hometown = hometown_txt.text;
    variables.FightClub = fightclub_txt.text;
    variables.Styles = styles_txt.text;
    variables.Email = email_txt.text;
    variables.Bio = bio_txt.text;
    url = new URLRequest (address);
    url.method = URLRequestMethod.POST;
    url.data = variables;
    navigateToURL (url);
    var reqThanks:URLRequest=new URLRequest("thanks.html");
    navigateToURL(reqThanks,"_blank");
    var reqHome:URLRequest=new URLRequest("index.html");
    navigateToURL(reqHome,"_parent");
Please Help!
Thanks,
John

Maybe someone here can help.
In spite of the site name, it is a Mac video card site.

Can anybody help with UCCE feature "Work Mode on Outgoing" in Agent Desk Settings

Hi,
my customer wants to have a wrapup time till the agents change their state to "ready" by
themself.
So I have configured the maximum for wrapup time 7200 sec in Agent Desk Settings.
But I have a problem with the feature "Work Mode on Outgoing" in agent desk settings in
ICM 7.5.5.
I think I recognized the function of this feature. It works like that:
- if an agent gets a call via ICM or directly on his phone he will be set into work mode
- if he make a call and the called number answer that call the agent is still on work
mode after he hung up
- but if the called number doesn't answer that call and the agent hangs up his phone he
is in ready/not ready state and that isn't the expected state.
( you can also rebuild this when you go off hook and then on hook again)
The problem is when the agent in state "ready" gets a call via ICM and after he hung up
his phone he is in state "work Ready". Now he makes an outgoing call but this call will
not be answered and if he hangs up his phone he directly gets a new call from ICM because
he was in "ready" state.
Is it possible to set a registry key or do another configuration for that feature "work
mode on outgoing" that it works for every new call even if the call will not be answered?
Cheers,
Tobias

ed_umansky wrote:The proper way to make outbound calls is to first go Not Ready then make a call using the desktop software.
Agreed. In fact, with CAD and CTIOS you cannot make an outbound call when Ready.
Regards,
Geoff

Can anybody help with this error message

I work with CS5.6 on RAW pictures shot with a Canon EOS 5 Mk II and have problems saving. Mycomputer is 32-bit with 4 Gb RAM, Windows 7.
Die Error Message in Adobe CS5.6 ist: „ could not complete the SAVE AS command because there is not enough memory (RAM)”

Its saying exactly what it means you do not have enough memory to save the file. You can either change the properties to save a smaller image
Or update your computer. In order to use the entire 4GB of RAM your computer needs to be 64bit not 32. 32bit can only access 2GB of ram and some apps can access an additional GB of ram. But if you do upgrade your computer get 6 or 8 GB of Ram, you will be happy you did.

Can anybody help with a dock question?

Hey all,
I am looking for a plastic-ish piece to cover the end that sticks out of the iphone dock. This part...
http://www.iphonealley.com/images/storyimages/july08/dock3.JPG
I used to have one but cant remember where I found it. I would really appreciate it. Thanks in advance guys.
Eric

Thanks for your replies,
I still feel very confused though. Could you explain the areas of my code i'd need to change? Will i have to start over again?
I have saved a jpeg banner that doesnt contain the logo to have running at the top of the page and i have a plain background to run along side the content.
Im changing the footer in a few days so im not too worried about that just now.
Can i make all of the to my template that will them apply to each page? Heres the code for it...
</head>
<body>
<div id="container">
<div id="banner">
<div id="bannerblankspace"></div>
<div id="navhome"><p><a href="../index.html">home</a></p>
</div>
<div id="navabout"><p><a href="http://www.allroots.org/about">about</a></p>
</div>
<div id="navyoga"><p><a href="../yoga/index.html">yoga</a></p>
</div>
<div id="navclasses"><p><a href="../classes/index.html">classes</a></p>
</div>
<div id="navretreats"><p><a href="../retreats/index.html">retreats</a><a href="../treatments/"></a></p>
</div>
<div id="navtreatments"><p><a href="../treatments/index.html">treatments</a></p>
</div>
<div id="navblog"><p><a href="../blog/index.html">blog</a></p>
</div>
<div id="navcontact"><p><a href="../contact/index.html">contact</a></p>
</div>
</div>

<div id="editablecontent"></div>

<div id="footer"> <img src="../footer.jpg" alt="all roots footer" width="1100" height="442" border="0" usemap="#Map2" />
<map name="Map2" id="Map2">
<area shape="rect" coords="633,414,722,437" href="http://www.bennh.co.uk" alt="benn.h design" />
</map>
</div>
</div>
</body>
</html>
Thanks!!!!!!!!

I have an ipod touch 4th gen. Can anybody help with ghost files?

Here is my problem: I added an equalizer program called "Louder Logic", It worked great until I needed to delete most of my Loaded CD's, to create space. I made the mistake of deleting the Louder Logic CD file first, which created these Ghost Files in the Apple CD file. The files appear, but are not bolded,and cannot be played. I tried deleting all music files and reseting the ipod, but the ghost files are still in the apple program. I would appreciate some help if anyone else made this same mistake.

Restore your iPod completely....

Can anybody help with these basic questions..?

Hi friends,
1)
I am developing a inventory module. As soon as sales man confirms invoice , invoice should be printed on LOCAL printer AND a picking list be printed on NETWORK printer of warehouse. So how can I get/assign a list of printers.
2) What is the maximum no.of records that can be displayed/entered in a datablock? Is it 250 ? If it is then, is there any way to enter/display more than 250 records in a datablock ? I am using forms5.0. what is the use of TABLE_FROM_BLOCK builtin ?
thankyou verymuch,
Mubeenmd

2) I haven't discovered the limit so far.
You may have thousands of records. Only, be careful how you handle the data, for fetching once thousands of records may choke the network.
1) Use reports. You should call the desired report using run_product and passing to it a parameter indicating the desname (printer name).
null

CAN ANYBODY HELP WITH BOOTCAMP ON MAVERICKS? SINCE UPGRADING TO MAVERICKS BOOTCAMP DOESNT WORK WITH MY WIN7 DISC THE PARTITION STOPS HALF WAY THROUGH THEN CRASHES MY MAC PRO

SINCE INSTALLING MAVERICKS I HAVE NOT BEEN ABLE TO INSTALL WINDOWS 7 ON MY START UP DISC.... WHEN I GO TO INSTALL AND PARTITION THE DISC IT LOADS TO ABOUT A QUARTER OF THE WAY THEN MY MAC PRO CRASHES

Hey, I had windows 7 installed on my mac pro which is a 2013 model with the partition set at 80 and it worked fine then when i upgraded to mavericks with the free download and tried to access bootcamp windows 7 was gone so when i tried to upload it again thats when the trouble began, i have tried about ten times and even made a copy of windows and tried that but when i do my partition it loads to about a quarter of the way and crashes my hole computer were i have to press and hold the power button

Hi, can anybody help with a problem I am having. I cannot get my Imac blue tooth to be discoverable.

My blue tooth does not show the second line down?

Hi Carolyn
what I meant was I cannot get discoverable on as in the second line.
the

Unable to connect facebook using HTTP_CONNECTOR in Integrator. Can anybody help for connecting Facebook with Integrator.??

Hi,
I am unable to connect facebook using HTTP_CONNECTOR component i have added all the parameters required for its authentication i.e client_id , client_secret, grant_type correct but the graph is giving the following error:
====================================================================================================================
ERROR [WatchDog_0] - Component [Query for access token:QUERY_FOR_ACCESS_TOKEN] finished with status ERROR.
peer not authenticated
ERROR [WatchDog_0] - Error details:
org.jetel.exception.JetelRuntimeException: Component [Query for access token:QUERY_FOR_ACCESS_TOKEN] finished with status ERROR.
at org.jetel.graph.Node.createNodeException(Node.java:535)
at org.jetel.graph.Node.run(Node.java:514)
at java.lang.Thread.run(Thread.java:722)
Caused by: javax.net.ssl.SSLPeerUnverifiedException: peer not authenticated
at sun.security.ssl.SSLSessionImpl.getPeerCertificates(SSLSessionImpl.java:397)
at org.apache.http.conn.ssl.AbstractVerifier.verify(AbstractVerifier.java:128)
at org.apache.http.conn.ssl.SSLSocketFactory.connectSocket(SSLSocketFactory.java:572)
at org.apache.http.impl.conn.DefaultClientConnectionOperator.openConnection(DefaultClientConnectionOperator.java:180)
at org.apache.http.impl.conn.AbstractPoolEntry.open(AbstractPoolEntry.java:151)
at org.apache.http.impl.conn.AbstractPooledConnAdapter.open(AbstractPooledConnAdapter.java:125)
at org.apache.http.impl.client.DefaultRequestDirector.tryConnect(DefaultRequestDirector.java:641)
at org.apache.http.impl.client.DefaultRequestDirector.execute(DefaultRequestDirector.java:480)
at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:906)
at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:805)
at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:784)
at org.jetel.component.HttpConnector.buildAndSendRequest(HttpConnector.java:1836)
at org.jetel.component.HttpConnector.process(HttpConnector.java:1803)
at org.jetel.component.HttpConnector.executeForRecord(HttpConnector.java:1947)
at org.jetel.component.HttpConnector.execute(HttpConnector.java:1914)
at org.jetel.graph.Node.run(Node.java:485)
... 1 more
============================================================================================================
Can anybody help with this ??

Hi Brett,
I have installed endeca in non-ssl mode. I am trying to validate the HTTP_Connector component as shown below and its showing the following error:
and if run the graph its showing error as mention above. I am new to endeca so can you please help me that what can i do for validating this component and connecting to facebook.

HT1338 Can anybody help with a very slow computer?

Similar Messages

Maybe you are looking for