HT1338 cd or dvd are not detected

no cd or dvd are detected it just spins and is ejected

Welcome to the Apple Support Communities
See "The drive accepts discs but they do not mount or are automatically ejected" > http://support.apple.com/kb/HT2801

Similar Messages

Cd dvd drive not detecting to cd or dvd.

cd dvd drive not detecting to cd or dvd. properties of same shows ok by device maneger. rotation of disck could not observed.

Hi Virendrasingh,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Notebook and CD/DVD not working correctly. I would perform a hardware test. Where did the CD come from? Were you having issues with the CD ROM before? I would be happy to assist if needed as there are many models of HP Notebook, I would need the model number. How Do I Find My Model Number or Product Number?
Please respond with which Operating System you are running:
Which Windows Operating System am I running?
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Mac Pro OSX 10.8.3 HP 4000 series scanners are not detecting.

Well..I think, I did everything. I have followed all instructions recommended by HP. I have updated and installed latest drivers. I have even searched the warez sites to find a trick. Useless, useless and useless.
Hardware is retina display with 256 GB SSD, 1600 mGz 8 GB ram and I7 processor. OSX version is 10.8.3
HP 4000 series scanners are not detecting by this machine. Vuescan is detecting but the scanning quality is also terrible.
Strange. I have nothing to say.

For the Scanjet 4850, follow the link below and click on the instructions tab. It looks like you have to get the software and drivers for 10.6 and run a patch to make them work with 10.8. That should get the scanner installed and working.
Scanjet Software Patch to Use OS X 10.6 Software and Driver on OS X 10.7 and 10.8
For the Scanjet G4050, all you should need to do is install the driver from the link below to be able to use the scanner with image capture and other similar products.
HP Scanjet ICA Software for Mac OS X 10.6.8, 10.7 or 10.8
Let me know what happens.
I am a printer tech for HP.

Embedded fonts are not detected by Designer

I am trying to create a fillable pdf based from a form created in Adobe Framemaker. However, the fonts I have embedded in the .pdf source file from FrameMaker are not detected by Livecycle Designer. These include very common fonts like Helvetica and Times. Is there a setting somewhere in Designer to pick up on these embedded fonts?

Thank you for your feedback. The Job im using is simple take a word document converting it into a pdf format. If this is done I will see it in my Acrobat view. There is no fonts at all. The System is notifying me that the font "ETBFGYI+DIN-Regular" are not embedded. And there will be some character not shown or printed correctly. I didn't change anything on the setting of Acrobat. I'm using this Acrobat almost for 2 years and I never had any problem. The Problem came up after the last update of the software to version 11.01.10.

How can I import photo to computer if my photo were save in event instead of saved photo for ipad1? Why Photo in event are not detected ?

How can I import photo to computer if my photo were save in event instead of saved photo for ipad? Photo in event are not detected.

Importing Personal Photos and videos from your iOS device to your computer.
http://support.apple.com/kb/HT4083
 Cheers, Tom

Docsis 2.0 and 1.1 cable modems are not detected via UBR-MC20X20V-5D line card

Hi All,
We have uBR10K series CMTS and recently installed UBR-MC20X20V-5D line card, requirement is to configure this line card to support docsis 1.1 and 2.0. Problem is after finished the configurations modems (Hitron and Motorola) are not detected by the system. means no modem mac address listing under "Show cable modem" command.
Our CMTS has the following components
ESR-PRE2: x1
ESR-PRE-MEM-FD128: x1
UBR10-DTCC: x2
UBR-MC20X20V-5D: x1
iOS version: 12.2(33)SCE3
Part of running-config as follows
cable spectrum-group 13 band 22800000 26600000
controller Integrated-Cable 8/0/0
rf-channel 0 cable downstream channel-id 145
rf-channel 0 frequency 501012500 annex B modulation 256qam interleave 32
rf-channel 0 rf-power 59.0
no rf-channel 0 rf-shutdown
interface Cable8/0/0
no cable packet-cache
cable bundle 1
cable upstream max-ports 4
cable upstream 0 connector 0
cable upstream 0 spectrum-group 13
cable upstream 0 channel-width 3200000 3200000
cable upstream 0 docsis-mode tdma
cable upstream 0 minislot-size 2
cable upstream 0 range-backoff 3 6
cable upstream 0 modulation-profile 21
no cable upstream 0 shutdown
diag output attached herewith. Please any one advice on how to resolve this issue.
Thanks in advance.

Hi All,
We have uBR10K series CMTS and recently installed UBR-MC20X20V-5D line card, requirement is to configure this line card to support docsis 1.1 and 2.0. Problem is after finished the configurations modems (Hitron and Motorola) are not detected by the system. means no modem mac address listing under "Show cable modem" command.
Our CMTS has the following components
ESR-PRE2: x1
ESR-PRE-MEM-FD128: x1
UBR10-DTCC: x2
UBR-MC20X20V-5D: x1
iOS version: 12.2(33)SCE3
Part of running-config as follows
cable spectrum-group 13 band 22800000 26600000
controller Integrated-Cable 8/0/0
rf-channel 0 cable downstream channel-id 145
rf-channel 0 frequency 501012500 annex B modulation 256qam interleave 32
rf-channel 0 rf-power 59.0
no rf-channel 0 rf-shutdown
interface Cable8/0/0
no cable packet-cache
cable bundle 1
cable upstream max-ports 4
cable upstream 0 connector 0
cable upstream 0 spectrum-group 13
cable upstream 0 channel-width 3200000 3200000
cable upstream 0 docsis-mode tdma
cable upstream 0 minislot-size 2
cable upstream 0 range-backoff 3 6
cable upstream 0 modulation-profile 21
no cable upstream 0 shutdown
diag output attached herewith. Please any one advice on how to resolve this issue.
Thanks in advance.

Internet connection are not detected

hi, i upgrade from win xp to 7. After acrobat 8 installation done, i got problem during activation. Cant activate, error msg "INTERNET CONNECTION ARE NOT DETECTED". Please help to to solve it. Thank you.

If you are using the 32-bit version you may be in better luck. It seems like a lot of Win 8 is similar to Win 7 (I know that is probably debatable) and several folks reported getting it to work on Win 7. If you have not tried with logging in as the administrator and turning off anti-virus during the install, you might be successful. However, you apparently got it installed. There may be some changes to the internet operation on Win 8 and that will have to be the focus, but that is not something I am good at. If you are not time pressed and stop by regularly, maybe some folks will come by with the suggestions.
For AA7 and before, the major problem with Win 7 was the failure of AcroTray. Hopefully some folks will be by soon.

Token and smart card reader are not detected on Mavericks if not plugged on a USB port during system boot

Well, both token and smart card reader are not detected on OS X 10.9 if not plugged on a USB port during system boot. So, if I am already working within the system and need to use my certificates I have to plug the token or smart card reader on a USB port and restart Mavericks.
Token is a GD Starsign and Smart Card Reader is a SCR3310 v2.
Thoughts?

SCS is a very good app, since I've read that Apple has discontinued support for PC/SC interfaces after the release of Mountain Lion.
(My previous installation was a Mavericks upgrade from Lion)
However, I don't know what and how to debug using Smart Card Services. Do you know any commands to use?
Apparently, the SC reader reports no issues: the LED is blinking blue when no smart card is present and becomes fixed blue when a smart card is inserted – according to the manuals, this shows that there is correct communication between the OS and the CCID reader.
I don't know what to do; I'm beginning to hypothesize it's a digital signer issue. In fact, my smart card only supports one application called File Protector (by Actalis) to officially sign digital documents. This application seems to have major difficulties in identifying the miniLector EVO.
The generic and ambiguous internal error comes when I try to manually identify the peripheral.
Athena CNS is one of the Italian smart cards and is automatically recognized and configured (so it's correct – no doubts about this), while "ACS ACR 38U-CCID 00 00" seems to be the real name of the miniLector.
(I'm assuming this because System Information also returns that the real manufacturer is ACS... bit4id is a re-brander)
However, when I click on it and then tap OK, it returns internal error.
As first attempt, I would try to completely erase&clean File Protector files to try a reinstall. Then, if this still doesn't work, I'd debug using the terminal.
So:
- Do you know any applications to 100% clean files created by an installer?
- Do you have in mind any solutions that I might have forgotten?
Thanks in advance from an OS X fan!

Iphone and Ipad are not detecting airprinters with Dlink DIR-651

Since changing my router to a Dlink DIR-651, my apple deivces are not detecting airprinters.
Dlink says I need to open ports on the router.
Please advise.

Hi..I've had a variant of this problem; my internet was accessible but my devices on wifi could not see the PC on Lan. That meant no iTunes syncing, Airplay from iTunes etc.
Dlink has a strange default setting that isolates Wifi & Wired connections into different subnets.I'm assuming you have DHCP setup on your router and you're PC or MAC has internet access via the same router. Try the following steps to see if this solves the problem for you; first Log into your DLINK admin page-
1. Go to Setup -> Local Network and Uncheck the box that says 'Configure the second IP Address and Subnet Mask for LAN' - Hit Apply
2. Go to Wireless -> Wireless Basic and Uncheck 'Enable MultiAP Isolation' - Hit Apply
3. Restart your Router
You do not need to port forward. Just get the Wired & Wireless devices on the same Subnet.
Let me know if this solves your problem. I've been frustrated by my problem for months & had nearly given up.
J

Windows 7 ultimate install on Hp Media center pc m7170n now cd/dvd drives not detected

My computer crashed so I went ahead and had windows 7 installed. Now my cd/dvd drives are not being detected. Any solutions out there?
Anthony

Ascottbag, welcome to the forum.
Here is a guide that may help you solve your problem. Please let us know if it helps or not.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Please Help me..... DVD drive not detected, Vista home basic 32 bit

Hi,
I have a compaq presario v3702au laptop with Vista basic 32 bit OS.
The dvd drive has suddenly vanished and is not detect by device manager. It show up in the BIOS and brifly powers up while booting(tray comes out on pressing the button) , but does not recieve power once booted( tray does not come out on pressing the button).
there are no upper and lower filters present so this remedy is not for me, ms fixit tool also could not help as it could not find any optical drive.
The hardware itself seems to be alright because if I press F8 to get to boot options ( Safe mode, etc) and insert a disc , the drive tries read it (ie. Drive receives power, tray opens and the disc also spins), but once the boot starts the dvd button becomes non functional as if it is not receiving power.
I really need my optical drive and would greatly appreciate any help on this .
Thanks in advance,
Sankr

So does it fully boot from the optical drive? All the other symptoms you describe are fully consistent with a dead drive, but if you can boot to a bootable disk then the drive is OK

Hp g6000 dvd drive not detected in my computer, tried registry fix and still not working.

Hi i have a hp g6093ea laptop and for a couple of weeks now i have had my dvd drive dissapear from my computer.
i have the tried the registry thing where you delete the upper and lower filters and then restart laptop.
it worked then couple days later it was gone again.
i have removed the dvd from laptop and clean the connection and put it back still the same.
i was told to remove any burning programs and reinstall so i did that and the drive came back then after reboot went again.
the dvd drive ejects and has power and attempts to read the disk but its just not detected in my computer.
i have even been into the bios and put cd drive as boot first.,
then put my bootable xp pro disk in and it wont boot from the bios.
so i thought i would try an external drive to boot from bios, and it doesnt boot from there either.
i have had the drive randomly pop up in my computer and then after a restart it would be gone again.
so i cant put a fresh install on my laptop and i dont know what else i can do.
any help
thanks

How old is your laptop?
Have you had any other problems, besides the dvd drive, in the past few months?

Windows 8.1 clients are not detecting updates deployed to them through SCCM 2012 R2

Hello,
We are using SCCM 2012 R2 to deploy software updates.
On Windows 8.1 SCCM does not show certain updates as being needed and isn't deploying them to the clients even though Windows Update will show them as high importance. These same updates are being detected and deployed to Windows 8 clients successfully.
I believe that the update catalog that WSUS uses may have some incorrect detection rules for the following updates:
2917933
2913320
2913270
2913152
2909569
2904440
2904266
2903939
2899189
2893984
2893294
2892074
2916626
2898785
My automatic deployment rules include Windows 8.1 in the product category. I have even created a standalone rule for Windows 8.1 that builds a new package and the behavior is the same.
We only have a handful of Windows 8+ clients so this hasn't been a big issue but others may want to keep an eye out.

I am also running into this issue. After "checking online for updates" on one of my machines in office I found that there were 21 important updates for my 8.1 box. When I cross reference them in SCCM under All Software Updates, it appears these
8.1 updates are not listed. They are however listed for all other OS.
10 seconds after typing this, I went in to verify my WSUS -> Products and Classifications settings and come to find 8.1 and 2012 R2 weren't selected, even though it's an option in SCCM. Go figure! This wasn't the end though. After
running a Synchronization, my issue still wasn't resolved. Went back to check my settings and they again were changed back to having these OS unchecked. Finally, a solution! I found that in SCCM, under Administration tab, Site Configuration
> Sites > ABC - Mysitename, right click and scroll down to "Configure Site Components" > Software Update Point. This setting (although the same as is in WSUS) takes precedence, thus was rolling my settings back to the original configuration
in WSUS.
So long story short, even though my automatic deployment rules stated approve all windows 7/8/8.1 criticals/importants, 8.1 was getting skipped for the most part because my WSUS server wasn't syncing with Microsoft for all of the updates I required. I
did have a couple of updates that squeezed through because they were categorized as "Security Updates for Windows 8, 8.1".
Not sure if this is the solution you were looking for, but your thread got me started in the right direction, hopefully this response helps in the same way!
Thanks!

Hard drive and dvd are not recognized in the setup menu, what could be wrong?

The hard drive and dvd drive are not recognized on the setup menu for my Pavilion a4316f desktop computer. Could it be a failure of the controller? Can a PCI controller be used to replace the mother board controller?
This question was solved.
View Solution.

The Recovery process would erase you hard drive, and attempt to install a fresh OS. Decidely a bad choice if you wanted to save your data files. The Recovery sets are "tattoo" with the BIOS hardwafre configuration. It will not, IMHO, recognize the PCI Sata card.
You mentioned the Recovery program on the hard drive actually requested the installer of the controller (PCI card). Try running from that.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

DVD drive not detected (K9N2GM-FD)

For some reason my motherboard( K9N2GM-FD) is not detecting my DVD drive.
Here is the setup I'm using:
AMD Athlon 64 X2 5200 Brisbane 2.7GHz
Kingston 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory
MSI K9N2GM-FD AM2+/AM2 NVIDIA GeForce 8200 Micro ATX AMD Motherboard
Seagate Barracuda 7200.10 ST3250410AS 250GB 7200 RPM 16MB Cache SATA 3.0Gb/s Hard Drive
a lite on DVD drive(model DH-20A4P33C) I bought at walmart
Antec NeoPower 550 550W ATX12V SLI Certified CrossFire Ready Active PFC Power Supply
The DVD drive is an IDE drive and it's getting power(I can open and close it).
I tried changing some things in the bios, trying a different drive, and trying a different IDE cable still can't get it to work.
every thing passes post test.
And the bios is version 1.2.
Any help would be greatly appreciated.

You did use proper standoff's to mount the board in the case?
yes
BTW, the controller is turned on I presume.
yes
If all is mounted correctly and there isn't any short, then I would RMA the board.
Ok I'll RMA it
Thanks for the help

HT1338 cd or dvd are not detected

Similar Messages

Maybe you are looking for