HT1338 Command Argument Error. 11

I am using Mac Office on a relatively new MacBook Pro running OSX 10.8.2 which is all updated and running well.
However, just lately I keep getting the above error message;
"COMMAND ARGUMENT ERROR.11"
appear every tme I open Outlook, the message will repeat for all email accounts on outlook.
I have cleared everything out of any junk any trash, cleared cookies anything I can think of.
Does anyone know what this is, and how to get rid of??

Absolutely fantastic advice. Thank you so much. I was receiving this error message and had read various scary stories about needing to reinstall Outlook and deleting identities etc. The simple step you advise resolved the issue. Thanks again
luisalva777 wrote:
I found out that you would received this message when attempting to send a big file, if you deleted it goes to the deleted folder at the IMAP server so the exchange will still send you those message back. I got rid off the file from the deleted and sent items in the exchange server and it solved my problem.

Similar Messages

BAD Command Argument Error. 11 writing to Exchange 2007 - Help Please...

Hi,
I am writing an IMAP to IMAP mailbox converter. I am testing a UW mailbox that I have approx. 1200 messages in to a MS Exchange 2007 Server. I am performing a javax.mail.Folder destFolder.appendMessages(sourceFolder.getMessages()). I transfer almost half the messages this why when i get the following exception. I have googled and not found any reference to it, nor does the protocol trace look bazaar :
javax.mail.MessagingException: A4 BAD Command Argument Error. 11;
nested exception is:
com.sun.mail.iap.BadCommandException: A4 BAD Command Argument Error. 11
at com.sun.mail.imap.IMAPFolder.doCommand(IMAPFolder.java:2337)
at com.sun.mail.imap.IMAPFolder.appendMessages(IMAPFolder.java:1289)
at edu.yale.its.tp.email.conversion.IMAPConverter.copyMessages(IMAPConverter.java:83)
at edu.yale.its.tp.email.conversion.IMAPConverter.copyFolder(IMAPConverter.java:75)
at edu.yale.its.tp.email.conversion.IMAPConverter.convert(IMAPConverter.java:36)
at edu.yale.its.tp.email.conversion.IMAPConverter.start(IMAPConverter.java:27)
at edu.yale.its.tp.email.conversion.IMAPConverter.main(IMAPConverter.java:16)
Caused by: com.sun.mail.iap.BadCommandException: A4 BAD Command Argument Error. 11
at com.sun.mail.iap.Protocol.handleResult(Protocol.java:296)
at com.sun.mail.imap.protocol.IMAPProtocol.appenduid(IMAPProtocol.java:881)
at com.sun.mail.imap.protocol.IMAPProtocol.append(IMAPProtocol.java:835)
at com.sun.mail.imap.IMAPFolder$10.doCommand(IMAPFolder.java:1292)
at com.sun.mail.imap.IMAPFolder.doProtocolCommand(IMAPFolder.java:2377)
at com.sun.mail.imap.IMAPFolder.doCommand(IMAPFolder.java:2332)
... 6 more
Here is the protocol trace...
0 [main] INFO - start Conversion
DEBUG: JavaMail version 1.4ea
DEBUG: java.io.FileNotFoundException: /usr/java/jdk1.5.0_11/jre/lib/javamail.providers (No such file or directory)
DEBUG: URL jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/imap.jar!/META-INF/javamail.providers
DEBUG: successfully loaded resource: jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/imap.jar!/META-INF/javamail.providers
DEBUG: URL jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/pop3.jar!/META-INF/javamail.providers
DEBUG: successfully loaded resource: jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/pop3.jar!/META-INF/javamail.providers
DEBUG: URL jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/smtp.jar!/META-INF/javamail.providers
DEBUG: successfully loaded resource: jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/smtp.jar!/META-INF/javamail.providers
DEBUG: successfully loaded resource: /META-INF/javamail.default.providers
DEBUG: Tables of loaded providers
DEBUG: Providers Listed By Class Name: {com.sun.mail.smtp.SMTPSSLTransport=javax.mail.Provider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Sun Microsystems, Inc], com.sun.mail.smtp.SMTPTransport=javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc], com.sun.mail.imap.IMAPSSLStore=javax.mail.Provider[STORE,imaps,com.sun.mail.imap.IMAPSSLStore,Sun Microsystems, Inc], com.sun.mail.pop3.POP3SSLStore=javax.mail.Provider[STORE,pop3s,com.sun.mail.pop3.POP3SSLStore,Sun Microsystems, Inc], com.sun.mail.imap.IMAPStore=javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc], com.sun.mail.pop3.POP3Store=javax.mail.Provider[STORE,pop3,com.sun.mail.pop3.POP3Store,Sun Microsystems, Inc]}
DEBUG: Providers Listed By Protocol: {imaps=javax.mail.Provider[STORE,imaps,com.sun.mail.imap.IMAPSSLStore,Sun Microsystems, Inc], imap=javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc], smtps=javax.mail.Provider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Sun Microsystems, Inc], pop3=javax.mail.Provider[STORE,pop3,com.sun.mail.pop3.POP3Store,Sun Microsy stems, Inc], smtp=javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc], pop3s=javax.mail.Provider[STORE,pop3s,com.sun.mail.pop3.POP3SSLStore,Sun Microsystems, Inc]}
DEBUG: successfully loaded resource: /META-INF/javamail.default.address.map
DEBUG: URL jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/smtp.jar!/META-INF/javamail.address.map
DEBUG: successfully loaded resource: jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/smtp.jar!/META-INF/javamail.address.map
DEBUG: java.io.FileNotFoundException: /usr/java/jdk1.5.0_11/jre/lib/javamail.address.map (No such file or directory)
DEBUG: getProvider() returning javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc]
DEBUG: mail.imap.partialfetch: false
* OK [CAPABILITY IMAP4REV1 LOGIN-REFERRALS AUTH=PLAIN AUTH=LOGIN] pantheon-po09.its.yale.edu IMAP4rev1 2002.336 at Fri, 21 Sep 2007 09:34:04 -0400 (EDT)
IMAP DEBUG: AUTH: PLAIN
IMAP DEBUG: AUTH: LOGIN
A0 CAPABILITY
* CAPABILITY IMAP4REV1 IDLE NAMESPACE MAILBOX-REFERRALS BINARY SCAN SORT THREAD=REFERENCES THREAD=ORDEREDSUBJECT MULTIAPPEND LOGIN-REFERRALS AUTH=PLAIN AUTH=LOGIN
A0 OK CAPABILITY completed
IMAP DEBUG: AUTH: PLAIN
IMAP DEBUG: AUTH: LOGIN
DEBUG: protocolConnect login, host=pantheon-po09.its.yale.edu, user=jjv6, password=<non-null>
A1 AUTHENTICATE PLAIN
+
+*<----REMOVED---->*+
A1 OK [CAPABILITY IMAP4REV1 IDLE NAMESPACE MAILBOX-REFERRALS BINARY SCAN SORT THREAD=REFERENCES THREAD=ORDEREDSUBJECT MULTIAPPEND] User jjv6 authenticated
DEBUG: JavaMail version 1.4ea
DEBUG: java.io.FileNotFoundException: /usr/java/jdk1.5.0_11/jre/lib/javamail.providers (No such file or directory)
DEBUG: URL jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/imap.jar!/META-INF/javamail.providers
DEBUG: successfully loaded resource: jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/imap.jar!/META-INF/javamail.providers
DEBUG: URL jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/pop3.jar!/META-INF/javamail.providers
DEBUG: successfully loaded resource: jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/pop3.jar!/META-INF/javamail.providers
DEBUG: URL jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/smtp.jar!/META-INF/javamail.providers
DEBUG: successfully loaded resource: jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/smtp.jar!/META-INF/javamail.providers
DEBUG: successfully loaded resource: /META-INF/javamail.default.providers
DEBUG: Tables of loaded providers
DEBUG: Providers Listed By Class Name: {com.sun.mail.smtp.SMTPSSLTransport=javax.mail.Provider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Sun Microsystems, Inc], com.sun.mail.smtp.SMTPTransport=javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc], com.sun.mail.imap.IMAPSSLStore=javax.mail.Provider[STORE,imaps,com.sun.mail.imap.IMAPSSLStore,Sun Microsystems, Inc], com.sun.mail.pop3.POP3SSLStore=javax.mail.Provider[STORE,pop3s,com.sun.mail.pop3.POP3SSLStore,Sun Microsystems, Inc], com.sun.mail.imap.IMAPStore=javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc], com.sun.mail.pop3.POP3Store=javax.mail.Provider[STORE,pop3,com.sun.mail.pop3.POP3Store,Sun Microsystems, Inc]}
DEBUG: Providers Listed By Protocol: {imaps=javax.mail.Provider[STORE,imaps,com.sun.mail.imap.IMAPSSLStore,Sun Microsystems, Inc], imap=javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc], smtps=javax.mail.Provider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Sun Microsystems, Inc], pop3=javax.mail.Provider[STORE,pop3,com.sun.mail.pop3.POP3Store,Sun Microsy stems, Inc], smtp=javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc], pop3s=javax.mail.Provider[STORE,pop3s,com.sun.mail.pop3.POP3SSLStore,Sun Microsystems, Inc]}
DEBUG: successfully loaded resource: /META-INF/javamail.default.address.map
DEBUG: URL jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/smtp.jar!/META-INF/javamail.address.map
DEBUG: successfully loaded resource: jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/smtp.jar!/META-INF/javamail.address.map
DEBUG: java.io.FileNotFoundException: /usr/java/jdk1.5.0_11/jre/lib/javamail.address.map (No such file or directory)
DEBUG: getProvider() returning javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc]
DEBUG: mail.imap.partialfetch: false
* OK Microsoft Exchange Server 2007 IMAP4 service ready
A0 CAPABILITY
* CAPABILITY IMAP4 IMAP4rev1 AUTH=NTLM AUTH=GSSAPI IDLE NAMESPACE LITERAL+
A0 OK CAPABILITY completed.
IMAP DEBUG: AUTH: NTLM
IMAP DEBUG: AUTH: GSSAPI
DEBUG: protocolConnect login, host=connect.yale.edu, user=jjv6, password=<non-null>
A1 LOGIN +*<----Removed---->*+
A1 OK LOGIN completed.
A2 LIST "" "Sakai-Dev List"
* LIST (\HasNoChildren) "/" "Sakai-Dev List"
A2 OK LIST completed.
DEBUG: connection available -- size: 1
A2 EXAMINE "Sakai-Dev List"
* 1206 EXISTS
* 2 RECENT
* OK [UIDVALIDITY 1151671867] UID validity status
* OK [UIDNEXT 11497] Predicted next UID
* FLAGS (Junk NonJunk $Label5 $Label1 $Label2 $Label3 $Label4 $MDNSent \Answered \Flagged \Deleted \Draft \Seen)
* OK [PERMANENTFLAGS ()] Permanent flags
* OK [UNSEEN 8] first unseen message in /imap/j/jjv6/Sakai-Dev List
A2 OK [READ-ONLY] EXAMINE completed
DEBUG: connection available -- size: 1
A3 SELECT "Sakai-Dev List"
* 524 EXISTS
* 0 RECENT
* FLAGS (\Seen \Answered \Flagged \Deleted \Draft $MDNSent)
* OK [PERMANENTFLAGS (\Seen \Answered \Flagged \Deleted \Draft $MDNSent)] Permanent flags
* OK [UIDVALIDITY 13758] UIDVALIDITY value
* OK [UIDNEXT 525] The next unique identifier value
A3 OK [READ-WRITE] SELECT completed.
A3 LIST "" "Sakai-Dev List"
* LIST (\NoInferiors \UnMarked) "/" "Sakai-Dev List"
A3 OK LIST completed
3080 [main] DEBUG - Source Messages : 1206
3080 [main] DEBUG - Dest Messages : 524
3080 [main] DEBUG - Copying 1206 Messages
A4 FETCH 1 (ENVELOPE INTERNALDATE RFC822.SIZE)
* 1 FETCH (ENVELOPE ("Tue, 21 Aug 2007 13:35:23 -0700 (PDT)" "Re: Sakai portlet problem in uPortal" (("Onur Sirin" NIL "onursirin" "sabanciuniv.edu")) (("Onur Sirin" NIL "onursirin" "sabanciuniv.edu")) (("Onur Sirin" NIL "onursirin" "sabanciuniv.edu")) ((NIL NIL "sakai-dev" "collab.sakaiproject.org")) NIL NIL "<[email protected]>" "<[email protected]>") INTERNALDATE "21-Aug-2007 16:37:20 -0400" RFC822.SIZE 7024)
A4 OK FETCH completed
A5 FETCH 1 (BODY[])
* 1 FETCH (BODY[] {7024}
Received: from mr4.its.yale.edu (mr4.its.yale.edu [130.132.50.10])
by pantheon-po09.its.yale.edu (8.12.11.20060308/8.12.11) with ESMTP id l7LKbJRC006741
(version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT);
Tue, 21 Aug 2007 16:37:19 -0400
Received: from paploo.uhi.ac.uk (app1.prod.collab.uhi.ac.uk [194.35.219.184])
by mr4.its.yale.edu (8.12.11.20060308/8.12.11) with ESMTP id l7LKbH3b030903;
Tue, 21 Aug 2007 16:37:18 -0400
Received: from paploo.uhi.ac.uk (localhost [127.0.0.1])
by paploo.uhi.ac.uk (Postfix) with ESMTP id 7F70050E80;
Tue, 21 Aug 2007 20:54:16 +0100 (BST)
Message-ID: <[email protected]>
Mime-Version: 1.0
Content-Transfer-Encoding: 7bit
Received: from prod.collab.uhi.ac.uk ([194.35.219.182])
by paploo.uhi.ac.uk (JAMES SMTP Server 2.1.3) with SMTP ID 665
for <[email protected]>;
Tue, 21 Aug 2007 20:53:07 +0100 (BST)
Received: from kuber.nabble.com (kuber.nabble.com [216.139.236.158])
by shmi.uhi.ac.uk (Postfix) with ESMTP id 347909F12
for <[email protected]>; Tue, 21 Aug 2007 21:35:26 +0100 (BST)
Received: from isper.nabble.com ([192.168.236.156])
by kuber.nabble.com with esmtp (Exim 4.63)
(envelope-from <[email protected]>)
id 1INaRf-0004yq-5U
for [email protected]; Tue, 21 Aug 2007 13:35:23 -0700
Date: Tue, 21 Aug 2007 13:35:23 -0700 (PDT)
From: Onur Sirin <[email protected]>
To: [email protected]
Subject: Re: Sakai portlet problem in uPortal
In-Reply-To: <[email protected]>
X-Content-Type-Outer-Envelope: text/plain; charset=us-ascii
X-Nabble-From: [email protected]
References: <[email protected]> <[email protected]>
X-Content-Type-Message-Body: text/plain; charset=us-ascii
Content-Type: text/plain; charset=us-ascii
X-YaleITSMailFilter: Version 1.2c (attachment(s) not renamed)
X-Yale-Not-Spam: For more info see: http://www.yale.edu/email/spam/content.html
X-Yale-Spam-Score: (0)
X-Yale-Filter-Score: 0
X-Scanned-By: MIMEDefang 2.52 on 130.132.50.10
Hi Charles,
I used a portlet you created first but not in trunk. (as sakai-dash.war
file) This might be older one.
From catalina.out i get following logs.First, as always i get:
WARN: Shared Segment file is missing
/home/sakai/tomcat/sakai/sharedsegments/1187722277361.zip (2007-08-21
23:02:38,279
SearchBuilder_0_org.sakaiproject.search.index.impl.JDBCClusterIndexStore)
ERROR: There has been a major poblem with the Search Index which has become
corrupted (2007-08-21 23:02:38,285
SearchBuilder_0_org.sakaiproject.search.index.impl.ClusterFSIndexStorage)
java.io.IOException: No Index available to open
at
org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexReader(ClusterFSIndexStorage.java:211)
at
org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexSearcher(ClusterFSIndexStorage.java:288)
at
org.sakaiproject.search.index.impl.SearchIndexStorage.getIndexSearcher(SearchIndexStorage.java:97)
at
org.sakaiproject.search.component.service.impl.SearchServiceImpl.getIndexSearcher(SearchServiceImpl.java:554)
at
org.sakaiproject.search.component.service.impl.SearchServiceImpl.reload(SearchServiceImpl.java:451)
at
org.sakaiproject.search.component.service.impl.SearchIndexBuilderWorkerImpl.run(SearchIndexBuilderWorkerImpl.java:485)
at java.lang.Thread.run(Thread.java:595)
WARN: Shared Segment file is missing
/home/sakai/tomcat/sakai/sharedsegments/1187722277361.zip (2007-08-21
23:02:38,460
SearchBuilder_1_org.sakaiproject.search.index.impl.JDBCClusterIndexStore)
ERROR: There has been a major poblem with the Search Index which has become
corrupted (2007-08-21 23:02:38,466
SearchBuilder_1_org.sakaiproject.search.index.impl.ClusterFSIndexStorage)
java.io.IOException: No Index available to open
at
org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexReader(ClusterFSIndexStorage.java:211)
at
org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexSearcher(ClusterFSIndexStorage.java:288)
at
org.sakaiproject.search.index.impl.SearchIndexStorage.getIndexSearcher(SearchIndexStorage.java:97)
at
org.sakaiproject.search.component.service.impl.SearchServiceImpl.getIndexSearcher(SearchServiceImpl.java:554)
at
org.sakaiproject.search.component.service.impl.SearchServiceImpl.reload(SearchServiceImpl.java:451)
at
org.sakaiproject.search.component.service.impl.SearchIndexBuilderWorkerImpl.run(SearchIndexBuilderWorkerImpl.java:485)
at java.lang.Thread.run(Thread.java:595)
I don't know what it is. !!!
And then, when i logged into portal, i get the following message:
SakaiPortalLogin.loginAndCreate id=onursirin pw=plugh-xyzzy sec=plugh-xyzzy
fn=Onur ln=Sirin [email protected] ip=10.4.3.1
Site exists...~onursirin
That's all what i see in catalina.out.
By the way, we are using Cisco CSS (Content Switch) for Load Balancing
process.
Behind CSS, there is apache server and application server installed on two
servers which mentioned in this page
http://confluence.sakaiproject.org/confluence/display/DOC/Sakai+2.4+Admin+Guide+-LoadBalancing+and+Scaling
http://confluence.sakaiproject.org/confluence/display/DOC/Sakai+2.4+Admin+Guide+-LoadBalancing+and+Scaling
as thin client .
CSS DNS address = sucourse.sabanciuniv.edu
App server DNS address = sakws1.sabanciuniv.edu and sakws2.sabanciuniv.edu
It is enough to type sucourse.sabanciuniv.edu address in web browser.
Their sakai.properties files are similar. However, there are following
parameters that i didn't use in my sakai.properties file. May be i should
use them. !!
[email protected]
[email protected]
[email protected]
Now, i have changed my connection type by connecting Campus VPN server with
Checkpoint VPN client, i got my sakai course pages correctly via sakai
portlet. However, in campus i had same problem today.
So, like i said, the situation is changing due to unknown reason.
From portlet, i clicked on any course, i get blank screen with followingaddress in web browser address bar.
https://sucourse.sabanciuniv.edu/sakai-login-tool/container?sakai.session=02274ca6-fc19-413c-80d9-4332ae4e4499&ticket=ST-5342-bLIfR5lVs29HB1ZAeRrMA3bbmQtVWRJqQ6N-20
That's all.
Thank you for your response Charles !
Regards
Charles Severance wrote:
View this message in context: http://www.nabble.com/Sakai-portlet-problem-in-uPortal-tf4304476.html#a12262587
Sent from the Sakai - Development mailing list archive at Nabble.com.
This automatic notification message was sent by Sakai Collab (https://collab.sakaiproject.org/portal) from the DG: Development (a.k.a. sakai-dev) site.
You can modify how you receive notifications at My Workspace > Preferences.
A5 OK FETCH completed
A6 FETCH 1 (FLAGS)
* 1 FETCH (FLAGS (\Seen \Deleted NonJunk))
A6 OK FETCH completed
A4 APPEND "Sakai-Dev List" (\Deleted \Seen NonJunk) "21-Aug-2007 16:37:20 -0400" {7024+}
A7 FETCH 1 (BODY[])
* 1 FETCH (BODY[] {7024}
Received: from mr4.its.yale.edu (mr4.its.yale.edu [130.132.50.10])
by pantheon-po09.its.yale.edu (8.12.11.20060308/8.12.11) with ESMTP id l7LKbJRC006741
(version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT);
Tue, 21 Aug 2007 16:37:19 -0400
Received: from paploo.uhi.ac.uk (app1.prod.collab.uhi.ac.uk [194.35.219.184])
by mr4.its.yale.edu (8.12.11.20060308/8.12.11) with ESMTP id l7LKbH3b030903;
Tue, 21 Aug 2007 16:37:18 -0400
Received: from paploo.uhi.ac.uk (localhost [127.0.0.1])
by paploo.uhi.ac.uk (Postfix) with ESMTP id 7F70050E80;
Tue, 21 Aug 2007 20:54:16 +0100 (BST)
Message-ID: <[email protected]>
Mime-Version: 1.0
Content-Transfer-Encoding: 7bit
Received: from prod.collab.uhi.ac.uk ([194.35.219.182])
by paploo.uhi.ac.uk (JAMES SMTP Server 2.1.3) with SMTP ID 665
for <[email protected]>;
Tue, 21 Aug 2007 20:53:07 +0100 (BST)
Received: from kuber.nabble.com (kuber.nabble.com [216.139.236.158])
by shmi.uhi.ac.uk (Postfix) with ESMTP id 347909F12
for <[email protected]>; Tue, 21 Aug 2007 21:35:26 +0100 (BST)
Received: from isper.nabble.com ([192.168.236.156])
by kuber.nabble.com with esmtp (Exim 4.63)
(envelope-from <[email protected]>)
id 1INaRf-0004yq-5U
for [email protected]; Tue, 21 Aug 2007 13:35:23 -0700
Date: Tue, 21 Aug 2007 13:35:23 -0700 (PDT)
From: Onur Sirin <[email protected]>
To: [email protected]
Subject: Re: Sakai portlet problem in uPortal
In-Reply-To: <[email protected]>
X-Content-Type-Outer-Envelope: text/plain; charset=us-ascii
X-Nabble-From: [email protected]
References: <[email protected]> <[email protected]>
X-Content-Type-Message-Body: text/plain; charset=us-ascii
Content-Type: text/plain; charset=us-ascii
X-YaleITSMailFilter: Version 1.2c (attachment(s) not renamed)
X-Yale-Not-Spam: For more info see: http://www.yale.edu/email/spam/content.html
X-Yale-Spam-Score: (0)
X-Yale-Filter-Score: 0
X-Scanned-By: MIMEDefang 2.52 on 130.132.50.10
Hi Charles,
I used a portlet you created first but not in trunk. (as sakai-dash.war
file) This might be older one.
From catalina.out i get following logs.First, as always i get:
WARN: Shared Segment file is missing
/home/sakai/tomcat/sakai/sharedsegments/1187722277361.zip (2007-08-21
23:02:38,279
SearchBuilder_0_org.sakaiproject.search.index.impl.JDBCClusterIndexStore)
ERROR: There has been a major poblem with the Search Index which has become
corrupted (2007-08-21 23:02:38,285
SearchBuilder_0_org.sakaiproject.search.index.impl.ClusterFSIndexStorage)
java.io.IOException: No Index available to open
at
org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexReader(ClusterFSIndexStorage.java:211)
at
org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexSearcher(ClusterFSIndexStorage.java:288)
at
org.sakaiproject.search.index.impl.SearchIndexStorage.getIndexSearcher(SearchIndexStorage.java:97)
at
org.sakaiproject.search.component.service.impl.SearchServiceImpl.getIndexSearcher(SearchServiceImpl.java:554)
at
org.sakaiproject.search.component.service.impl.SearchServiceImpl.reload(SearchServiceImpl.java:451)
at
org.sakaiproject.search.component.service.impl.SearchIndexBuilderWorkerImpl.run(SearchIndexBuilderWorkerImpl.java:485)
at java.lang.Thread.run(Thread.java:595)
WARN: Shared Segment file is missing
/home/sakai/tomcat/sakai/sharedsegments/1187722277361.zip (2007-08-21
23:02:38,460
SearchBuilder_1_org.sakaiproject.search.index.impl.JDBCClusterIndexStore)
ERROR: There has been a major poblem with the Search Index which has become
corrupted (2007-08-21 23:02:38,466
SearchBuilder_1_org.sakaiproject.search.index.impl.ClusterFSIndexStorage)
java.io.IOException: No Index available to open
at
org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexReader(ClusterFSIndexStorage.java:211)
at
org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexSearcher(ClusterFSIndexStorage.java:288)
at
org.sakaiproject.search.index.impl.SearchIndexStorage.getIndexSearcher(SearchIndexStorage.java:97)
at
org.sakaiproject.search.component.service.impl.SearchServiceImpl.getIndexSearcher(SearchServiceImpl.java:554)
at
org.sakaiproject.search.component.service.impl.SearchServiceImpl.reload(SearchServiceImpl.java:451)
at
org.sakaiproject.search.component.service.impl.SearchIndexBuilderWorkerImpl.run(SearchIndexBuilderWorkerImpl.java:485)
at java.lang.Thread.run(Thread.java:595)
I don't know what it is. !!!
And then, when i logged into portal, i get the following message:
SakaiPortalLogin.loginAndCreate id=onursirin pw=plugh-xyzzy sec=plugh-xyzzy
fn=Onur ln=Sirin [email protected] ip=10.4.3.1
Site exists...~onursirin
That's all what i see in catalina.out.
By the way, we are using Cisco CSS (Content Switch) for Load Balancing
process.
Behind CSS, there is apache server and application server installed on two
servers which mentioned in this page
http://confluence.sakaiproject.org/confluence/display/DOC/Sakai+2.4+Admin+Guide+-LoadBalancing+and+Scaling
http://confluence.sakaiproject.org/confluence/display/DOC/Sakai+2.4+Admin+Guide+-LoadBalancing+and+Scaling
as thin client .
CSS DNS address = sucourse.sabanciuniv.edu
App server DNS address = sakws1.sabanciuniv.edu and sakws2.sabanciuniv.edu
It is enough to type sucourse.sabanciuniv.edu address in web browser.
Their sakai.properties files are similar. However, there are following
parameters that i didn't use in my sakai.properties file. May be i should
use them. !!
[email protected]
[email protected]
[email protected]
Now, i have changed my connection type by connecting Campus VPN server with
Checkpoint VPN client, i got my sakai course pages correctly via sakai
portlet. However, in campus i had same problem today.
So, like i said, the situation is changing due to unknown reason.
From portlet, i clicked on any course, i get blank screen with followingaddress in web browser address bar.
https://sucourse.sabanciuniv.edu/sakai-login-tool/container?sakai.session=02274ca6-fc19-413c-80d9-4332ae4e4499&ticket=ST-5342-bLIfR5lVs29HB1ZAeRrMA3bbmQtVWRJqQ6N-20
That's all.
Thank you for your response Charles !
Regards
Charles Severance wrote:
View this message in context: http://www.nabble.com/Sakai-portlet-problem-in-uPortal-tf4304476.html#a12262587
Sent from the Sakai - Development mailing list archive at Nabble.com.
This automatic notification message was sent by Sakai Collab (https://collab.sakaiproject.org/portal) from the DG: Development (a.k.a. sakai-dev) site.
You can modify how you receive notifications at My Workspace > Preferences.
A7 OK FETCH completed
Received: from mr4.its.yale.edu (mr4.its.yale.edu [130.132.50.10])
by pantheon-po09.its.yale.edu (8.12.11.20060308/8.12.11) with ESMTP id l7LKbJRC006741
(version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT);
Tue, 21 Aug 2007 16:37:19 -0400
Received: from paploo.uhi.ac.uk (app1.prod.collab.uhi.ac.uk [194.35.219.184])
by mr4.its.yale.edu (8.12.11.20060308/8.12.11) with ESMTP id l7LKbH3b030903;
Tue, 21 Aug 2007 16:37:18 -0400
Received: from paploo.uhi.ac.uk (localhost [127.0.0.1])
by paploo.uhi.ac.uk (Postfix) with ESMTP id 7F70050E80;
Tue, 21 Aug 2007 20:54:16 +0100 (BST)
Message-ID: <[email protected]>
Mime-Version: 1.0
Content-Transfer-Encoding: 7bit
Received: from prod.collab.uhi.ac.uk ([194.35.219.182])
by paploo.uhi.ac.uk (JAMES SMTP Server 2.1.3) with SMTP ID 665
for <[email protected]>;
Tue, 21 Aug 2007 20:53:07 +0100 (BST)
Received: from kuber.nabble.com (kuber.nabble.com [216.139.236.158])
by shmi.uhi.ac.uk (Postfix) with ESMTP id 347909F12
for <[email protected]>; Tue, 21 Aug 2007 21:35:26 +0100 (BST)
Received: from isper.nabble.com ([192.168.236.156])
by kuber.nabble.com with esmtp (Exim 4.63)
(envelope-from <[email protected]>)
id 1INaRf-0004yq-5U
for [email protected]; Tue, 21 Aug 2007 13:35:23 -0700
Date: Tue, 21 Aug 2007 13:35:23 -0700 (PDT)
From: Onur Sirin <[email protected]>
To: [email protected]
Subject: Re: Sakai portlet problem in uPortal
In-Reply-To: <[email protected]>
X-Content-Type-Outer-Envelope: text/plain; charset=us-ascii
X-Nabble-From: [email protected]
References: <[email protected]> <[email protected]>
X-Content-Type-Message-Body: text/plain; charset=us-ascii
Content-Type: text/plain; charset=us-ascii
X-YaleITSMailFilter: Version 1.2c (attachment(s) not renamed)
X-Yale-Not-Spam: For more info see: http://www.yale.edu/email/spam/content.html
X-Yale-Spam-Score: (0)
X-Yale-Filter-Score: 0
X-Scanned-By: MIMEDefang 2.52 on 130.132.50.10
Hi Charles,
I used a portlet you created first but not in trunk. (as sakai-dash.war
file) This might be older one.
From catalina.out i get following logs.First, as always i get:
WARN: Shared Segment file is missing
/home/sakai/tomcat/sakai/sharedsegments/1187722277361.zip (2007-08-21
23:02:38,279
SearchBuilder_0_org.sakaiproject.search.index.impl.JDBCClusterIndexStore)
ERROR: There has been a major poblem with the Search Index which has become
corrupted (2007-08-21 23:02:38,285
SearchBuilder_0_org.sakaiproject.search.index.impl.ClusterFSIndexStorage)
java.io.IOException: No Index available to open
at
org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexReader(ClusterFSIndexStorage.java:211)
at
org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexSearcher(ClusterFSIndexStorage.java:288)
at
org.sakaiproject.search.index.impl.SearchIndexStorage.getIndexSearcher(SearchIndexStorage.java:97)
at
org.sakaiproject.search.component.service.impl.SearchServiceImpl.getIndexSearcher(SearchServiceImpl.java:554)
at
org.sakaiproject.search.component.service.impl.SearchServiceImpl.reload(SearchServiceImpl.java:451)
at
org.sakaiproject.search.component.service.impl.SearchIndexBuilderWorkerImpl.run(SearchIndexBuilderWorkerImpl.java:485)
at java.lang.Thread.run(Thread.java:595)
WARN: Shared Segment file is missing
/home/sakai/tomcat/sakai/sharedsegments/1187722277361.zip (2007-08-21
23:02:38,460
SearchBuilder_1_org.sakaiproject.search.index.impl.JDBCClusterIndexStore)
ERROR: There has been a major poblem with the Search Index which has become
corrupted (2007-08-21 23:02:38,466
SearchBuilder_1_org.sakaiproject.search.index.impl.ClusterFSIndexStorage)
java.io.IOException: No Index available to open
at
org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexReader(ClusterFSIndexStorage.java:211)
at
org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexSearcher(ClusterFSIndexStorage.java:288)
at
org.sakaiproject.search.index.impl.SearchIndexStorage.getIndexSearcher(SearchIndexStorage.java:97)
at
org.sakaiproject.search.component.service.impl.SearchServiceImpl.getIndexSearcher(SearchServiceImpl.java:554)
at
org.sakaiproject.search.component.service.impl.SearchServiceImpl.reload(SearchServiceImpl.java:451)
at
org.sakaiproject.search.component.service.impl.SearchIndexBuilderWorkerImpl.run(SearchIndexBuilderWorkerImpl.java:485)
at java.lang.Thread.run(Thread.java:595)
I don't know what it is. !!!
And then, when i logged into portal, i get the following message:
SakaiPortalLogin.loginAndCreate id=onursirin pw=plugh-xyzzy sec=plugh-xyzzy
fn=Onur ln=Sirin [email protected] ip=10.4.3.1
Site exists...~onursirin
That's all what i see in catalina.out.
By the way, we are using Cisco CSS (Content Switch) for Load Balancing
process.
Behind CSS, there is apache server and application server installed on two
servers which mentioned in this page
http://confluence.sakaiproject.org/confluence/display/DOC/Sakai+2.4+Admin+Guide+-LoadBalancing+and+Scaling
http://confluence.sakaiproject.org/confluence/display/DOC/Sakai+2.4+Admin+Guide+-LoadBalancing+and+Scaling
as thin client .
CSS DNS address = sucourse.sabanciuniv.edu
App server DNS address = sakws1.sabanciuniv.edu and sakws2.sabanciuniv.edu
It is enough to type sucourse.sabanciuniv.edu address in web browser.
Their sakai.properties files are similar. However, there are following
parameters that i didn't use in my sakai.properties file. May be i should
use them. !!
[email protected]
[email protected]
[email protected]
Now, i have changed my connection type by connecting Campus VPN server

The command that seems to be causing problems for Exchange is this one:
A4 APPEND "Sakai-Dev List" (\Deleted \Seen NonJunk) "21-Aug-2007 16:37:20 -0400" {7024+}
As far as I can see, there's nothing wrong with the syntax of that command.
My first guess is that Exchange is unhappy with the flags. Possibly
it refuses to append a message with the \Deleted flag set. If you're
willing to modify the flags in the source mailbox, I would try turning
off the DELETED flag. Or, try not copying deleted messages.
If that doesn't work, the next thing to try is to get rid of all of the
flags. You might want to copy the message into a local copy
in order to lose all the flags from the original.

Javax.mail.MessagingException: A5 BAD Command Argument Error. 12;

This error appeared on mailboxes hosted on Exchange 2007. It happens when a folder is searched with 11+ OR terms. It works fine with <= 10 subjectTerm items OR'ed together. The search term does not matter. The mailboxes are migrating from Exchange 2003 where the problem does not occur. I tested 51 OR'ed subject terms against the 2003 mailbox and it works fine. I didn't test beyond 51 terms.
I upgraded to JavaMail 1.4.2 and the problem still exists.
I'm not sure if this is a JavaMail bug or an error with Exchange 2007.
Here is the output generated with session debugging enabled against Exchange 2007:
DEBUG: setDebug: JavaMail version 1.4.2
DEBUG: getProvider() returning javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc]
DEBUG: mail.imap.fetchsize: 16384
DEBUG: mail.imap.statuscachetimeout: 1000
DEBUG: mail.imap.appendbuffersize: -1
DEBUG: mail.imap.minidletime: 10
DEBUG: trying to connect to host "qtdenexcam20.ad.domain.com", port 143, isSSL false
* OK Microsoft Exchange Server 2007 IMAP4 service ready
A0 CAPABILITY
* CAPABILITY IMAP4 IMAP4rev1 AUTH=NTLM AUTH=GSSAPI AUTH=PLAIN STARTTLS IDLE NAMESPACE LITERAL+
A0 OK CAPABILITY completed.
IMAP DEBUG: AUTH: NTLM
IMAP DEBUG: AUTH: GSSAPI
IMAP DEBUG: AUTH: PLAIN
DEBUG: protocolConnect login, host=qtdenexcam20.ad.domain.com, user=userid, password=<non-null>
A1 AUTHENTICATE PLAIN
+
d21kZXYAd21kZXYAUXczc3QyMDA4
A1 OK AUTHENTICATE completed.
A2 CAPABILITY
* CAPABILITY IMAP4 IMAP4rev1 AUTH=NTLM AUTH=GSSAPI AUTH=PLAIN STARTTLS IDLE NAMESPACE LITERAL+
A2 OK CAPABILITY completed.
IMAP DEBUG: AUTH: NTLM
IMAP DEBUG: AUTH: GSSAPI
IMAP DEBUG: AUTH: PLAIN
Opening email folders.
DEBUG: connection available -- size: 1
A3 SELECT INBOX
* 23 EXISTS
* 0 RECENT
* FLAGS (\Seen \Answered \Flagged \Deleted \Draft $MDNSent)
* OK [PERMANENTFLAGS (\Seen \Answered \Flagged \Deleted \Draft $MDNSent)] Permanent flags
* OK [UNSEEN 6] Is the first unseen message
* OK [UIDVALIDITY 765] UIDVALIDITY value
* OK [UIDNEXT 15790] The next unique identifier value
A3 OK [READ-WRITE] SELECT completed.
A4 LIST INBOX ""
* LIST (\Noselect \HasChildren) "/" ""
A4 OK LIST completed.
* OK Microsoft Exchange Server 2007 IMAP4 service ready
A0 CAPABILITY
* CAPABILITY IMAP4 IMAP4rev1 AUTH=NTLM AUTH=GSSAPI AUTH=PLAIN STARTTLS IDLE NAMESPACE LITERAL+
A0 OK CAPABILITY completed.
IMAP DEBUG: AUTH: NTLM
IMAP DEBUG: AUTH: GSSAPI
IMAP DEBUG: AUTH: PLAIN
A1 AUTHENTICATE PLAIN
+
d21kZXYAd21kZXYAUXczc3QyMDA4
A1 OK AUTHENTICATE completed.
A2 CAPABILITY
* CAPABILITY IMAP4 IMAP4rev1 AUTH=NTLM AUTH=GSSAPI AUTH=PLAIN STARTTLS IDLE NAMESPACE LITERAL+
A2 OK CAPABILITY completed.
IMAP DEBUG: AUTH: NTLM
IMAP DEBUG: AUTH: GSSAPI
IMAP DEBUG: AUTH: PLAIN
A3 LIST "" Folders/processed_items_LARG
* LIST (\HasChildren) "/" Folders/processed_items_LARG
A3 OK LIST completed.
A4 LIST "" Folders/junk_LARG
* LIST (\HasNoChildren) "/" Folders/junk_LARG
A4 OK LIST completed.
Retrieving all messages from: INBOX
23 messages retrieved.
Processing junk email.
*** Searching for junk mail ***
A5 SEARCH OR OR OR OR OR OR OR OR OR OR SUBJECT test1 SUBJECT test2 SUBJECT test3 SUBJECT test4 SUBJECT test5 SUBJECT test6 SUBJECT test7 SUBJECT test8 SUBJE
CT test9 SUBJECT test10 SUBJECT test11 1:23
A5 BAD Command Argument Error. 12
Exception caught in main while processing config/email.larg.properties.
javax.mail.MessagingException: A5 BAD Command Argument Error. 12;
nested exception is:
com.sun.mail.iap.BadCommandException: A5 BAD Command Argument Error. 12
javax.mail.MessagingException: A5 BAD Command Argument Error. 12;
nested exception is:
com.sun.mail.iap.BadCommandException: A5 BAD Command Argument Error. 12
at com.sun.mail.imap.IMAPFolder.search(IMAPFolder.java:1706)
at com.domain.nroc.email.WMSEmailAgent.processJunkEmail(Unknown Source)
at com.domain.nroc.email.WMSEmailAgent.main(Unknown Source)
Caused by: com.sun.mail.iap.BadCommandException: A5 BAD Command Argument Error. 12
at com.sun.mail.iap.Protocol.handleResult(Protocol.java:338)
at com.sun.mail.imap.protocol.IMAPProtocol.issueSearch(IMAPProtocol.java:1550)
at com.sun.mail.imap.protocol.IMAPProtocol.search(IMAPProtocol.java:1458)
at com.sun.mail.imap.protocol.IMAPProtocol.search(IMAPProtocol.java:1433)
at com.sun.mail.imap.IMAPFolder.search(IMAPFolder.java:1687)
... 2 more
I'll post the Exchange 2003 debug output in a follow-up message because this message is exceeding the length limit.

Here is the output generated with session debugging enabled against Exchange 2003 (and 51 subject terms):
DEBUG: setDebug: JavaMail version 1.4.2
DEBUG: getProvider() returning javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc]
DEBUG: mail.imap.fetchsize: 16384
DEBUG: mail.imap.statuscachetimeout: 1000
DEBUG: mail.imap.appendbuffersize: -1
DEBUG: mail.imap.minidletime: 10
DEBUG: trying to connect to host "itdene2km05.ad.domain.com", port 143, isSSL false
* OK Microsoft Exchange Server 2003 IMAP4rev1 server version 6.5.7638.1 (ITDENE2KM05.AD.DOMAIN.COM) ready.
A0 CAPABILITY
* CAPABILITY IMAP4 IMAP4rev1 IDLE LOGIN-REFERRALS MAILBOX-REFERRALS NAMESPACE LITERAL+ UIDPLUS CHILDREN AUTH=NTLM
A0 OK CAPABILITY completed.
IMAP DEBUG: AUTH: NTLM
DEBUG: protocolConnect login, host=itdene2km05.ad.domain.com, user=ad\userid, password=<non-null>
A1 LOGIN "ad\\userid" pass
A1 OK LOGIN completed.
A2 CAPABILITY
* CAPABILITY IMAP4 IMAP4rev1 IDLE LOGIN-REFERRALS MAILBOX-REFERRALS NAMESPACE LITERAL+ UIDPLUS CHILDREN AUTH=NTLM
A2 OK CAPABILITY completed.
IMAP DEBUG: AUTH: NTLM
Opening email folders.
DEBUG: connection available -- size: 1
A3 SELECT INBOX
* 1 EXISTS
* 0 RECENT
* FLAGS (\Seen \Answered \Flagged \Deleted \Draft $MDNSent)
* OK [PERMANENTFLAGS (\Seen \Answered \Flagged \Deleted \Draft $MDNSent)] Permanent flags
* OK [UIDVALIDITY 597925] UIDVALIDITY value
A3 OK [READ-WRITE] SELECT completed.
A4 LIST INBOX ""
* LIST (\Noselect) "/" ""
A4 OK LIST completed.
* OK Microsoft Exchange Server 2003 IMAP4rev1 server version 6.5.7638.1 (ITDENE2KM05.AD.DOMAIN.COM) ready.
A0 CAPABILITY
* CAPABILITY IMAP4 IMAP4rev1 IDLE LOGIN-REFERRALS MAILBOX-REFERRALS NAMESPACE LITERAL+ UIDPLUS CHILDREN AUTH=NTLM
A0 OK CAPABILITY completed.
IMAP DEBUG: AUTH: NTLM
A1 LOGIN "ad\\userid" pass
A1 OK LOGIN completed.
A2 CAPABILITY
* CAPABILITY IMAP4 IMAP4rev1 IDLE LOGIN-REFERRALS MAILBOX-REFERRALS NAMESPACE LITERAL+ UIDPLUS CHILDREN AUTH=NTLM
A2 OK CAPABILITY completed.
IMAP DEBUG: AUTH: NTLM
A3 LIST "" Folders/processed_items_LARG
* LIST (\HasChildren) "/" Folders/processed_items_LARG
A3 OK LIST completed.
A4 LIST "" Folders/junk_LARG
* LIST (\HasNoChildren) "/" Folders/junk_LARG
A4 OK LIST completed.
Retrieving all messages from: INBOX
1 messages retrieved.
Processing junk email.
*** Searching for junk mail ***
A5 SEARCH OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR
OR SUBJECT test1 SUBJECT test2 SUBJECT test3 SUBJECT test4 SUBJECT test5 SUBJECT test6 SUBJECT test7 SUBJECT test8 SUBJECT test9 SUBJECT test10 SUBJECT test1
1 SUBJECT test12 SUBJECT test13 SUBJECT test14 SUBJECT test15 SUBJECT test16 SUBJECT test17 SUBJECT test18 SUBJECT test19 SUBJECT test20 SUBJECT test21 SUBJE
CT test22 SUBJECT test23 SUBJECT test24 SUBJECT test25 SUBJECT test26 SUBJECT test27 SUBJECT test28 SUBJECT test29 SUBJECT test30 SUBJECT test31 SUBJECT test
32 SUBJECT test33 SUBJECT test34 SUBJECT test35 SUBJECT test36 SUBJECT test37 SUBJECT test38 SUBJECT test39 SUBJECT test40 SUBJECT test41 SUBJECT test42 SUBJ
ECT test43 SUBJECT test44 SUBJECT test45 SUBJECT test46 SUBJECT test47 SUBJECT test48 SUBJECT test49 SUBJECT test50 SUBJECT "Exchange Maintenance" 1
* SEARCH 1
A5 OK SEARCH completed.
1 junk email items identified.
A5 LIST "" Folders/junk_LARG

ProcessBuilder-command arguments that contain speech marks.

I'm using Java's ProcessBuilder to call a program. However I am having trouble when one of the command arguments contains speech marks. I've tried using escape characters in the usual way, but this doesn't seem to work.
For example this works as expected: Process p = new ProcessBuilder("programX","arg1","arg2").start();
However when arg2 needs to be surrounded by quotations for programX to understand it then this following line of code doesn't work
Process p = new ProcessBuilder("programX","arg1","\"arg2\"").start();
Any suggestions on how to solve this problem would be great
Cheers

Hi
Thanks for the replies.
The code compiles fine. It's a runtime error that complains about a file not existing. The file that doesn't exist is the one that should have been created from the output of the external program. So for some reason the external program is not running as expected.
It's the single program argument with the surrounding speech marks that causes an error, since when this argument is not used the external program runs fine and the file is created. I also use the command p.waitFor() to make sure that the process has finished running before the next block of code is executed. I am sure that the speech mark syntax is correct for the external program, since it works fine when run directly from the command line in this way. So it is definitely not the external program that has the error, but something is going wrong with the ProcessBuilder call and how I am using it.
Any further suggestion are much appreciated
Cheers
Linda

Install.cmd gives insufficient arguments error from sapinst

Hi,
I am trying to install TREX 7.1 in the Windows 2008 environment to support the PI7.1 systems. The install ends with the below error messages.
WARNING    2009-12-29 08:57:24.505
           CJSlibModule::writeWarning_impl()
Execution of the command "D:\admin\TREX\tx_trex_content\TX_WINDOWS_X86_64\install.cmd action=install "logdir=C:\Program Files/sapinst_instdir/TREX/install" --sid=TRX --instance=00 XXXXXX --target=D:\usr\sap --host=saptrex --domain=" finished with return code 3. Output:
!!!password not set
>>>>>>insufficient arguments
ERROR      2009-12-29 08:57:24.505 [iaxxinscbk.cpp:244]
CJS-00284 System call failed. DIAGNOSIS: Running D:/admin/TREX\tx_trex_content\TX_WINDOWS_X86_64\install.cmd returned an unexpected error. SOLUTION: Check for details.
ERROR      2009-12-29 08:57:24.505
           CJSlibModule::writeError_impl()
MUT-03025 Caught ESAPinstException in Modulecall: D:/admin/TREX\tx_trex_content\TX_WINDOWS_X86_64\install.cmd.
Any help is greatly appreciated.
Regards,
Rick

Where you able to solve this issue, i have the exact same situation
Thanks
Uday

[svn:osmf:] 11848: Added check for argument error DRM subsystem throws while generating a DRMContentInfo Object .

Revision: 11848
Revision: 11848
Author:   [email protected]
Date:     2009-11-16 10:00:48 -0800 (Mon, 16 Nov 2009)
Log Message:
Added check for argument error DRM subsystem throws while generating a DRMContentInfo Object.
Modified Paths:
    osmf/trunk/framework/MediaFramework/org/osmf/drm/DRMServices.as

Well, I can tell you that this kind of error is not OS related, but rather a HW thing. It happens where there is a general detection of something going wrong. Sometimes it can happen randomly and might not be an indication of a problem. But sometimes it can be caused by things that are improperly functioning within the system like bad capacitors.
Unfortunately I don't really know what to do about such things except give you machine a proper inspection. But if things are working fine, and continue to do so, I wouldn't worry about it. If it becomes a regular occurance, then I'd worry.

Aspnet_compiler: Command Prompt error

Hello
I am getting the following error when trying to compile my ASP.NET project from the Command Prompt:
error 1001: Unexpected parameter: 'Studio'.
The compiler on my hard drive is here:
C:\Windows\Microsoft.NET\Framework64\v4.0.30319, although I do have another folder here:
C:\Windows\Microsoft.NET\Framework\v4.0.30319
There is an aspnet_compiler.exe in both of those 'framework' folders.
Having located the compiler in command prompt on that path above, I now need to compile my files (aspx.aspx.vb, and Web.config) in accordance with the guidelines here:
http://msdn.microsoft.com/en-us/library/ms229863.aspx
I create a targetDir on my PC as follows: C:\myForm, and type in the location of my project in Command Prompt. This is a
physical path so I use '-p' and I wish the file to be updateable so I use '-u'.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319>aspnet_compiler C:\Users\Steve\Documents\Visual Studio 2013\WebSites\WebSite10 -p -u C:\myForm
This 'Visual Studio 2013' looks suspicious because of the spaces but if I right-click on the folder containing the project itself and select properties, this is what the path looks like:
C:\Users\Steve\Documents\Visual Studio 2013\WebSites
What am I doing wrong, please?
Thank you.

Hi,
I'm not familiar with Aspnet_compiler.exe tool. However, I think the path must be in double quotes if you use "-p".
Like:
Aspnet_compiler -v /WebApplication1 -p "c:\Documents and Settings\Default\My Documents\MyWebApplications\WebApplication1" -keyfile "c:\Documents and Settings\Default\My Documents\Key.sn" -aptca c:\applicationTarget
What's more, it looks like you didn't post in a correct forum. You need to reopen a new thread in
asp.net forum because we can't help move this issue there.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Command line: Error: unable to open '/Applications/flex_sdk_4\frameworks\flex-config.xml'

Hi,
I am new to flex. I am trying to use the xmp sdk to create custom file info panels in photoshop.
I am going through the example show in the adobe documentation 'Building a panel with Flex SDK'
I got any running and I got all the files setup in the proper folders but I cannot for the life of me figure out why I keep getting this error.
Buildfile: /Volumes/three/2011/XMP/test project/build.xml
clean:
buildPanel:
     [echo] --> Panel 'Test2'
    [compc] Adobe Compc (Flex Component Compiler)
    [compc] Version 4.5.1 build 21328
    [compc] Copyright (c) 2004-2011 Adobe Systems, Inc. All rights reserved.
    [compc] command line: Error: unable to open '/Applications/flex_sdk_4.5\frameworks\flex-config.xml'
    [compc] Use 'compc -help' for information about using the command line.
BUILD FAILED
/Volumes/three/2011/XMP/test project/build.xml:20: compc task failed
Total time: 616 milliseconds
thanks,
digitalkyle

can you tell us where your services-config.xml file is
located. can you make sure it is right under the "src" folder of
the Flex Builder project.
Hope this helps.

Argument error; the number of columns does not equal the number of parameters.

I am using the Database Toolkit (Enterprise Connectivity) to check for a network connection and then send information from a local database to a SQL database on the network if needed. In development of the code I continue to receive Error 1 and the Possible Reason(s) is "Argument error; the number of columns does not equal the number of parameters." I am using the DBToolsSelectData.VI to retrieve data from the local MDB file and the DBToolsInsertData.VI to write it to the SQL file. The collection of the data from the MDB file is successful and the connection and validation of the table and columns in the SQL file is also successful. The error occurs when the Insert VI tries to build the query. The number of columns being written (attempted) does match the number of columns in the data, they are both 16 string arrays.

Ok, it's taken a bit, and I have a solution! It took a while to figure out what the DCT is doing, but it seems to be working now.
The reason for the original error is that you were passing into the insert subVI an array of variants - which the input to the VI coerced into a single variant. You were getting the error because as far as the insert VI was concerned you were only passing it a single data value. The way to get around that was to create a cluster with one element for each column value, convert the cluster to a variant and pass the result to the insert VI - see attachment.
In terms of the other modifications, I made a copy of the endurance.mdb file, emptied it and used it as the destination for the copy.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps
Attachments:
NetworkCheck.vi ‏49 KB

Invalid argument error in IE7

I'm working on my first HTML5 site. And I'm getting an invalid argument error that's keeping it from loading all of the content on the page. It's telling me that the error is in line 256, but line 256 is an image tag.
The page in question is here:
http://jerauf.com/filmggp/locations-sub.html
I'm thinking that it's a script but can't tell what the problem is.
Can anyone help?

Hello.
<img src="image.jpg" height="120" width="120" alt="description" />

Invalid Argument Error

I am getting above error on load of the JNLP file. When I access the URL for the JNLP, the JNLP file downloads (I can see the content using Ethereal) and WebStart does launch. So, I assume MIME type is OK and the download servlet is working, at least enough to serve up the JNLP.
What makes this more curious is that it is a working configuration in Jetty. I can take the exact same application - drop it in Jetty, it works; drop the SAME file in Tomcat 4.1.27, it doesn't work.
Anyone seen this?
WS 1.2
J2SDK 1.4.1_01 on both ends.
Tomcat 4.1.27
The error and log information is as follows.
Error dialog/General Tab:
An error occurred while launching/running the application.
Category: Invalid Argument error
Could not load file/URL specified: C:\Documents and Settings\mjf860\Local Settings\Temporary Internet Files\Content.IE5\2DQR21KT\cwms[1].jnlp
The JNLP file does in fact NOT exist (the directory does, no JNLP files are in in it), despite the fact that I saw it go over the network to my box.
The JNLPServetLog stuff:
JnlpDownloadServlet(3): Request: /cwms/app/cwms.jnlp
JnlpDownloadServlet(3): User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; H010818)
JnlpDownloadServlet(4): DownloadRequest[path=/app/cwms.jnlp isPlatformRequest=false]
JnlpDownloadServlet(4): Basic Protocol lookup
JnlpDownloadServlet(4): JnlpResource: JnlpResource[WAR Path: /app/cwms.jnlp lastModified=Tue Sep 09 17:14:51 EDT 2003]]
JnlpDownloadServlet(3): Resource returned: /app/cwms.jnlp
JnlpDownloadServlet(4): lastModified: 1063142091684 Tue Sep 09 17:14:51 EDT 2003
TIA,
Mike

I just found out by searching tomcat list that in your
dynamic jnlp file you can set the cache-control to
public using
response.setHeader("Cache-Control", "public")
This will allow Internet Explorer to cache the jnlp
file and you won't get the exception.
This way you can keep your jnlp file under a security
constraint.I wasn't sure what was meant by "dynamic JNLP" or how to follow the above procedure, so I created a servlet (a JSP, actually) to implement the above workaround. It will serve JNLP files from a password-protected directory in a way that works for the Tomcat-to-Internet Explorer combination. It's posted below in case it can help anyone else.
There are still a few things to watch out for: (1) the protection (the <auth-method> tag in your web.xml file) for the JNLP file must be BASIC--FORM will not work. (2) you will have to enter the password twice--once for the browse and again for Web Start.
The servlet itself is enclosed below. If you have questions about it, please post them to this forum.
Bob Pollack
Gestalt, LLC
<%@ page import="java.io.*" %>
<%
// This is a fetch program to retrieve a JNLP file from a
// password-protected directory. Java Webstart has problems
// doing this directly, so this program must be used instead.
// That is, instead of a link that points to "xxx.jnlp", make
// a link that points to "fetchJNLP.jsp?name=xxx.jnlp".
// Even with this program, the only kind of authentication
// that Webstart understands is basic authentication.
// You cannot use form-based authentication and Webstart together.
String jnlpName = request.getParameter ("name");
String myPath = request.getServletPath ();
String myURL = request.getRequestURL ().toString ();
String dirPath = null;
String dirURL = null;
String jnlpPath = null;
String jnlpRealPath = null;
boolean abort = false;
// Screen the name parameter to make sure that hackers
// cannot use this program to fetch any old thing
// The current criteria are that the name must be a JNLP file
// in this directory
if (jnlpName == null)
abort = true;
else if (! jnlpName.endsWith (".jnlp"))
abort = true;
else if (jnlpName.indexOf ("/") >= 0)
abort = true;
if (abort)
response.sendError (response.SC_FORBIDDEN);
return;
int pos = myPath.lastIndexOf ("/");
if (pos < 0)
pos = myPath.length ();
dirPath = myPath.substring (0, pos);
pos = myURL.lastIndexOf ("/");
if (pos < 0)
pos = myURL.length ();
dirURL = myURL.substring (0, pos);
if (jnlpName.startsWith ("/"))
jnlpPath = jnlpName;
else
jnlpPath = dirPath + "/" + jnlpName;
out.clear ();
response.setContentType ("application/x-java-jnlp-file");
// The following line is the reason this servlet exists.
// If a JNLP file is in a protected directory, Tomcat will
// send it out with a Cache-Control header of "no-cache",
// which keeps the client end of JNLP from working.
// See Java Developer Forum,
// "Java Web Start & JNLP: Invalid Argument Error",
// at http://forum.java.sun.com/spider.jsp?f=38&t=442995
// for a rambling discussion of this issue.
response.setHeader ("Cache-Control", "public");
jnlpRealPath = application.getRealPath (jnlpPath);
File jnlpFile = new File (jnlpRealPath);
FileReader fr = new FileReader (jnlpFile);
BufferedReader br = new BufferedReader (fr);
while (true)
String line = br.readLine ();
if (line == null)
break;
// As long as we're doing this anyway, we'll add a service
// that substitutes the full URL for this directory into
// the codebase of the outgoing JNLP file. This will make it
// possible for the files to be moved from machine to machine
// without changes.
// For example, instead of saying
// codebase="http://myhost:8080/home/protected"
// the JNLP file can say
// codebase="$BASE"
String base = "$BASE";
pos = line.indexOf (base);
if (pos < 0)
out.println (line);
else
out.print (line.substring (0, pos));
out.print (dirURL);
out.print (line.substring (pos + base.length ()));
out.println ();
out.flush ();
out.close ();
%>

Argument Error

Ok I have gotten this far but it throws an Argument Error after the first sequence.
import fl.transitions.Tween;
import fl.transitions.TweenEvent;
import fl.transitions.easing.*;
var high = 375;
var low = 50;
var startPoint = 0;
function resizeBar(){
var widthPoint = Math.floor(Math.random() * (high - low)) + low;
var xScale:Tween = new Tween(boxOne, "width", None.easeNone, startPoint, widthPoint, 3, true);
startPoint = widthPoint;
xScale.addEventListener(TweenEvent.MOTION_FINISH, resizeBar);
resizeBar();
ArgumentError: Error #1063: Argument count mismatch on Untitled_fla::horizonalBars_1/resizeBar(). Expected 0, got 1.
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at fl.transitions::Tween/set time()
at fl.transitions::Tween/nextFrame()
at fl.transitions::Tween/onEnterFrame()

your eventlistener is passing an argument. if you really intend an endless loop, use:
import fl.transitions.Tween;
import fl.transitions.TweenEvent;
import fl.transitions.easing.*;
var high = 375;
var low = 50;
var startPoint = 0;
function resizeBar(e:TweenEvent=null){
var widthPoint = Math.floor(Math.random() * (high - low)) + low;
var xScale:Tween = new Tween(boxOne, "width", None.easeNone, startPoint, widthPoint, 3, true);
startPoint = widthPoint;
xScale.addEventListener(TweenEvent.MOTION_FINISH, resizeBar);
resizeBar();

Database command execution error. (While mounting a repository)

Hello,
I am trying to mount 'Customer Master' repository in Console
But it is giving me the following error.
'Database command execution error. A SQL statement failed to execute. The actual error may have been written to a log file.'
Can any1 throw some light as to how do i solve this problem.
And where to check this log file?
Also i am able to mount any other repository without this error.
Regards,
Roshani

Hi Roshni,
It could be that the repository tables were not correctly created in the Oracle Database.
Try restarting the oracle services ,also check the Oracle listener configurations are correct.
If you have an archieve of this repository then try mounting the archieve with a different name.
Also try restarting the MDM server.
Hope It Helped
Thanks & Regards
Simona Pinto

Chatter email 502 5.5.1 Unrecognized command Sending Error

I have a Treo 680 (Rogers) that I have been successfully using Chatter email with for about 6 months (multiple email accounts). No changes have been made in configuration however today when I try to send email messages I'm receiving a 502 5.5.1 Unrecognized command Sending Error message and can not send email messages on any accounts. I can still receive however. Any suggestions?
Post relates to: Treo 680 (Rogers)

Hi Paul,
May you please guide me thru the SMTP configuration.
By the way, I tried to implement the APEX_MAIL and it's delivering the mails internally but not externally. When I check the Mail log all mails appear but when I check my yahoo account there's no mail delivered but in the internal mail there's mail delivered.
Here's my application level On Demand process code (On Demand: Run this application process when requested by a page process)DECLARE    l_id number;    l_index number;    l_vc_arr2    APEX_APPLICATION_GLOBAL.VC_ARR2;
BEGIN l_id := APEX_MAIL.SEND(p_to => :P19_EMAIL,
p_from => :P19_FROM,
p_subj => :P19_SUBJECT,
p_body => :P19_BODY);
l_vc_arr2 := APEX_UTIL.STRING_TO_TABLE(:P92_IMAGE);
FOR i_index IN 1..l_vc_arr2.count LOOP
FOR c1 in (select filename, photo, mimetype from employee_tb
      where emp_id = l_vc_arr2(i_index))
loop APEX_MAIL.ADD_ATTACHMENT( p_mail_id    => l_id,
p_attachment => c1.photo,
p_filename   => c1.filename,
p_mime_type => c1.mimetype);
END LOOP c1;
END LOOP i_index;
COMMIT;END;
-- push the e-mail queue for immediate delivery:
begin
wwv_flow_mail.push_queue(
   P_SMTP_HOSTNAME => 'mail host',
   P_SMTP_PORTNO => '#'
end;Kind regards
Mel

Argument Error: One or more parameters are null.

I am getting "javax.servlet.jsp.JspException: Argument Error: One or more parameters are null". Following are first two lines of the exception
javax.servlet.jsp.JspException: Argument Error: One or more parameters are null. at com.sun.faces.taglib.html_basic.PanelGridTag.doEndTag(PanelGridTag.java:470) at empEditById.jspService(_empEditById.java:290)
Can anyone help me out with this.

I don't know which part of jsp code is giving problem. Here is the complete listing
<f:view>
<html>
 <head>
 <meta http-equiv="Content-Type"
 content="text/html; charset=windows-1252"/>
 <title>Main</title>
 </head>
 <body><h:form>
 
 Employee Edit
 
 
 <h:messages/>
 
 <h:panelGrid columns="3">
 <h:outputLabel value="Employee Id:"/>
 <h:inputText id="empId" disabled="true"
 value="#{b_empEditById.empId}"/>
 <h:panelGroup/>
 <h:outputLabel value="First Name:"/>
 <h:inputText id="firstName" required="true"
 value="#{b_empEditById.firstName}"/>
 <h:message for="firstName"/>
 <h:outputLabel value="Last Name:"/>
 <h:inputText id="lastName" required="true"
 value="#{b_empEditById.lastName}"/>
 <h:message for="lastName"/>
 <h:outputLabel value="Hire Date:"/>
 <h:inputText id="hireDate" value="#{b_empEditById.hireDate}">
 <f:convertDateTime pattern="dd-MM-yyyy"/>
 </h:inputText>
 <h:message for="hireDate"/>
 <h:outputLabel value="Reports To:"/>
 <h:selectOneMenu id="reportsTo"
 value="#{b_empEditById.reportsTo}">
 <f:selectItems value="#{requestScope.b_empEditById.selectAllEmployees}"/>
 </h:selectOneMenu>
 <h:message for="reportsTo"/>
 <h:commandButton value="Confirm" id="edit"
 action="#{b_empEditById.confirm}"/>
 <h:commandButton value="Back" type="submit" immediate="true"
 action="back"/>
 </h:panelGrid>
 
 </h:form></body>
</html>
</f:view>I am using Oracle jdeveloper 10g but I don't which version of JSF I am using.

HT1338 Command Argument Error. 11

Similar Messages

Maybe you are looking for