HT1338 connection to internet ok but cannot view webpages in browser

I have a MacBook that has always been able to connect to the internet and view webpages aok until this afternoon. Although it is connected to the Internet ok, it will not let me view any webpages in either Safari or Firefox. The page justs spins and spins and never loads. I've tried a few different websites and have also tried via both our wireless connection and hardline connection to no success. 
I am able to connect to the internet and view webapges ok on a different computer on the same network so I believe this problem is limited to my MacBook.
I've done some research and understand that maybe something called 'mDNSResponder' could be the problem? Something about problems resolving the hosts via DNS?  I've seen some suggestions on how to fix this but I am wary of just doing a bunch of stuff that someone posted online - especially when it involves commands with the word 'kill' in it. And I'm not understanding where I am supposed to type those commands anyway - in Terminal?
Any suggestions?
Thanks in advance.

Hello Ruth,
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
Is that Interface dragged to the top of Network>Show:>Network Port Configurations and checked ON?
The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Then... Try putting these numbers in Network>TCP/IP>DNS Servers, for the Interface you connect with...
208.67.222.222
208.67.220.220
Then Apply. For 10.5/10.6/10.7 Network, highlight Interface>Advanced button>DNS tab>little + icon.
DNS Servers are a bit like Phone books where you look up a name and it gives you the phone number, in our case, you put in apple.com and it comes back with 17.149.160.49 behind the scenes.  
These Servers have been patched to guard against DNS poisoning, and are faster/more reliable than most ISP's DNS Servers.

Similar Messages

  • URL links provided in emails (Windows Mail) stopped working. I get a popup message: "Windows cannot find...." asking me to make the URL is correct. I connect to Internet Explorer, but not Firefox, my default browser.

    I have already updated Firefox to latest version and reset the default mail program to Windows Mail. But Windows Mail now doesn't want to recognize Firefox. If I shift to Internet Explorer, I have no problem. I have no problem receiving or sending emails, just using links contained in them.
    This happened suddenly, two days ago, at the end of a day when linking had been possible, per usual.

    nothing that I could find would solve my problem, so I just gave up trying...
    then I had a group of Microsoft Updates badly interact with each other, causing me all kinds of stability problems involving SQL and printer drivers.
    To fix those issues, I backed out all updates within the prior two months, then [slowly and painfully!] reinstalled them -- when done in groups, you can tell how Microsoft corrects bad updates by noting which ones are not reinstalled.
    I also had to download and install every single MS SQL update available before everything that was broken worked again. Note that none of the updates had titles that suggested anything at all to do with web browsing (other than Internet Explorer) or Firefox.
    There was also at least one Firefox update shortly after my re-installation of Windows Updates.
    Funny thing happened along that path: as of today (version 32.0.1) has none of the problems I reported, but I cannot say for certain which change fixed them: I was far more concerned fixing SQL and printer issues to even test Firefox for default file association settings.
    Sorry that I cannot be more useful, other than the general suggestions to:
    (1) keep your system fully updated with all patches
    (2) keep your anti-virus, anti-malware, and anti-spybot software current as well
    (3) keep any program that uses HTML and other browser protocols also up to date
    (4) take regular snapshots of your registry, and create a system restore point before every system and software update, so you can more easily back out problems
    (5) keep the installation package(s) for prior version(s) of software (and Windows Update files) at least until you verify an update hasn't broken anything.
    Hope that helps.
    --Richard

  • I  downloaded adobe digital editions but I cannot authorised my computer, they say I should connect to internet first but I am connected????

    please help me thank you!!!
    I  downloaded adobe digital editions but I cannot authorised my computer, they say I should connect to internet first but I am connected????

    Thank you for your help, it is now fix.
    Envoyé de mon iPad
    Le 2014-11-15 à 15:45, kglad <[email protected]> a écrit :
    I  downloaded adobe digital editions but I cannot authorised my computer, they say I should connect to internet first but I am connected????
    created by kglad in Downloading, Installing, Setting Up - View the full discussion
    attaching a screenshot of the exact error message would help, if the link below does not.
    Sign in, activation, or connection errors | CS5.5 and later
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6932977#6932977 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6932977#6932977
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • TS1398 Connected to Wi Fi but cannot get Internet access

    Connected to Wi Fi but cannot get Internet access Have just done OTA update Dec 1 1012, could this be the problem?

    Does the iPod connect to other networks?
    Do other devices now connect?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Apple TV connects to the network but cannot connect to the internet.

    Apple TV connects to the network but cannot connect to the internet. Works on other Apple TV's we have just not this new one. Defective???  Thank you!

    This might help:
    Apple TV (2nd gen.) saw my wireless network but did not accept my password (gave a network error message). It fixed instantly doing this:
    Made a note of the Apple TV's MAC address. Get it by pressing Menu on the remote, then Settings > General > About. It's called "WiFi address."
    Use your browser on a network connected computer to go to your router settings (usually 192.168.1.1).
    Under "Wireless > Wireless MAC Filter" (or something similar) do these steps:
    Enable Wireless MAC filter
    Enable "Permit PCs listed below to access the wireless network"
    Enter the Apple TV's MAC address
    Click "Save Setting"
    When I did this the network connection immediately started working.
    Note: These instructions are based on a Cisco Wireless-N Broadband, model WRT160Nv2, firmware v2.0.02.

  • Hi There for the last few days I can log into Icloud on my pc but I can't action anything. I can see the emails but cannot view them. I cannot compose a new email.. I don't know if this is icloud or my pc? Its working fine when I access on my iphone..

    Hi There
    for the last few days I can log into icloud via icloud.com on my pc but I can't action anything.
    I can see the emails but cannot view them. I cannot compose a new email.. I don't know if this is icloud or my pc?
    Its working fine when I access on my iphone.
    many thanks
    Cherry

    Just realised its fine through internet explorer but its Mozilla.. so assuming an issue with my browser?

  • Can charge my iphone 4 with the USB connected to a pc but cannot charge my iphone4 with wall charge

    Why ca I charge my iphone 4 with the USB connected to a pc but cannot charge my iphone 4 with wall charge?

    If it charges when connected to a computer USB, it can't be the phone.  Try a different cable.

  • How can I use Notes in Yosemite on my Mac Book Pro?  I used Notes on Lion but cannot view Notes on Yosemite?

    How can I use Notes in Yosemite on my Mac Book Pro?  I used Notes on Lion but cannot view Notes on Yosemite?  Many thanks, Rick

    Hello rick0809,
    Thank you for visiting Apple Support Communities.
    Are you getting an error message when trying to use Notes?
    Notes Help: Write and share notes
    (Applications > Notes)
    Regards,
    Nubz

  • Main viewer mode affects browser mode but cannot be switched in browser mod

    The main viewer modes - specifically Multi and Stack change the selection and navigation operations of browser mode, but cannot be adjusted in browser mode.
    For example, if the main viewer mode is Stack mode, then the stack pick is green, the motion left and right cursors do nothing (beep), and multi-selection is not possible. While this is useful if you want to do stack operations, it's annoying if you don't, and it's not possible to switch to multi-select off without either going to the main viewer and changing it, OR (oddly) double clicking on a non stacked image and that goes to the main viewer AND changes it.
    Ideally you should be able to switch main viewer mode even when you are in browser mode.

    The main viewer modes - specifically Multi and Stack change the selection and navigation operations of browser mode, but cannot be adjusted in browser mode.
    For example, if the main viewer mode is Stack mode, then the stack pick is green, the motion left and right cursors do nothing (beep), and multi-selection is not possible. While this is useful if you want to do stack operations, it's annoying if you don't, and it's not possible to switch to multi-select off without either going to the main viewer and changing it, OR (oddly) double clicking on a non stacked image and that goes to the main viewer AND changes it.
    Ideally you should be able to switch main viewer mode even when you are in browser mode.

  • HT3204 when accessing the itunes store it is showing error message not connected to internet.   But computer is connected to internet

    when accessing the itunes store it is showing error message not connected to internet.   But computer is connected to internet. Plz I need  help

    Naomi Blewit wrote:
    Hi,
    I am going on iTunes and it is saying that I am not connected to the internet but I am. I was on iTunes last a few days ago. Please help...
    iTunes is a program on your computer, it is not "the Internet".  The fact that the program runs has no bearing on Internet connectivity.
    Maybe if a little more information was supplied, like version of the Operating system on the computer and version of iTunes, then a little more assistance could be provided.

  • I can see myself and hear the other person while attempting to connect to face time but cannot see them

    New iPhone 4S. Attempting to use face time but it wont show the person I am attempting to connect with. I can see myself and hear the other person while attempting to connect to face time but cannot see them. Face time was working before.

    Hello Wollyt
    Check out the article below for troubleshooting FaceTime issue.
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/ts3367
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • My iPad is connected to my network but cannot open any page in safari or access the internet

    My iPad is connected to my network and have full signal but cannot open any page in safari or connect to the internet or able to log in to iCloud. I forgot all my connections, reset my router updated to 8.1.1 and nothing

    Hopefully, this will be of some help.
    iOS: Troubleshooting Wi-Fi networks and connections - Apple Support

  • Connected to home network, but cannot access internet on ipad

    I have got strong signal on home network but cannot access the internet. Tried resets, etc

    It could be a simple problem that needs a reset for the related devices. Other than that, try to control the security settings and passwords of your home network. You might be using WEP password protocol to connect your home network. Try to use WPA protocol instead of WEP. Maybe it will help to solve your problem.

  • HT1595 Apple tv will connect to the network but cannot connect to the Internet

    My apple tv is connecting to my network but it says it cannot connect to the Internet. I've already tried restarting everything and I've also connected it to my portable mifi network with same results. Anybody have any ideas?

    This is what the MAC address clone looks like:
    Should I enable it?  If so, should I put something in the MAC Address?  What?  I was able to connect it thru my MiFi, but not my home network.  Until today, it's been connected to my home network for about 8 months with no problem.  Haven't used it for a while...not since I got a new router.

  • Keep getting this message"Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." , but cannot view Firefox open window or close it. Have to always reboot system.

    Keep getting this message "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." However, cannot view open window or close Firefox. Have to always reboot system to access the internet.

    For possible causes of this error, and how to troubleshoot it see [[Firefox is already running but is not responding]].

Maybe you are looking for

  • Short dump while opening the infopackage............

    Hi, I am getting Short dump. This happens when I am opening any info package for one Infosource. I am not getting any error when I open other infopackages. There are 7 infopackages for this info source and when I open any of these , gets Short Dump w

  • Aperture 3 Crashed; Can't relocate Masters despite time machine backup

    I recently had a major crash of my OS system 10.6.8.  Not sure what happened, but essentially had to rebuild the directory with Diskwarrior.  When I tried to open Aperture 3, I received an error message and the inability to open Aperture.  After sear

  • Printing  a pdf in ie 9

    when i open a pdf in ie9 and print it, the print setting is set to color when the printer default is greyscale. does not happen in firefox, in non-pdf pages in ie, or when the pdf is opened by reader not in ie. reader is 9.4.6 thanks, roger

  • Some shows (HD only) not getting flagged in Guide as New

    In the FIOS Guide, many shows are correctly flagged as "First Run" on the regular display channels, but not flagged as "First Run" on the exact same HD-version channel.  For example in the guide, bring up Thursday, Sept 26th at 8pm.  Channel 4 shows

  • Install GarageBand2 w/o DVD drive

    Got my kids iLife 05 for holiday (pretty much exclusively for GarageBand2) to install on G4 iMac. I did NOT know that the GarageBand2 installer is only on the DVD; the iMac has only a CD R/W drive. Is there a way to split up the GB2 installer (on ano