HT1338 download grad ios 7 to 6.1.3
dear !!!
i am not good for computer , i would like to know : how to down grad from ios 7 yo ios 6.1.3
if you have video or pictures let easy me to do .. thank for your help !!! have good weekend
chuan do
I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums.
You may leave comments at Apple Feedback.
Similar Messages
-
HT1338 I had downloaded d iOS 6.1.3 software bt after downloading I can't install into my iPhone
I had downloaded d iOS 6.1.3 bt after downloading I can't install into my iPhone
This is the procedure for updating iOS, which can be done on the device, or through iTunes.
http://support.apple.com/kb/ht4623
There should not be a step where you download the update separately.
If you are referring the downloading as an automatic part of the overall process, can you explain the failure in more detail? -
Ever since I downloaded the iOS 6 update, my car stereo no longer works like it did before
My Pioneer car stereo worked exactly like it was supposed to with my iPhone 4s. By syncing to the car stereo, I could listen to all of my music on my iPhone and receive Pandora in the car. Since I downloaded the iOS 6 update two weeks ago, my car stereo has basically become inert, no longer syncs to my iPhone and has turned my expensive car stereo into a glorified CD player. I googled this problem first and noticed many other people had the exact same problem that I have. Since I can't undo the iOS 6 update (****, I wish I could), is there anyone out there with a similar problem and is there anything to remedy this problem. I will never download an Apple update again!!!!!!!!!!!!!!!!!!!!!!!!!
Would love to see an update on issues like this.
I have the pioneer avh-3400bh. Prior to iOS6 on my iphone 4, everything worked as it should. Upon updating to ios6 on the 4, and now also with the iphone 5, my head unit will play BT audio, but it receives no track/data information. Using USB, I can no longer use my phone to browse songs, I can only use the head unit control. the phones tell me that an accessory is connected and won't allow me to do anything. Same for the pandora app -
I have synced my ipad with my computer then downloaded latest ios version. How do I resync my data back to my ipad?
You Restore from iTune Backup.The syncing is towards the end of the Restore.
1. Settings>General>Reset>Erase all content and settings
2. You'll be asked twice to confirm
3. You'll see Apple logo and progress bar
4. You'll see a big iPad logo on screen
5. Configuration start
6. Set language
7. Set country
8. Select Network and input Password>Join
9. Enable Location Service>Next
10. You'll be given 3 options (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
11. Select Restore from iTune Backup
12. You will see picture of USB cable pointing towards iPad
13. Connect iPad to iTune (make sure iTune is on standby)
14. Tap Continue (computer)
15. Restore iPad from Backup (computer)
16. See progress bar with estimated time (computer)
17. See Restore in Progress on iPad
18. See Apple logo
19. See Apple and Progress Bar
20. Slide to Unlock
21. Copying Apps back to iPad (computer)
22. You'll see Loading/Installing/Waiting below the Apps (iPad)
23. Sync Music/Podcast/Movies to iPad (computer)
24. Sync completed (computer) -
Downloaded new iOS for iPhone 5. Now the handset is running hot, keeps freezing on different screens, won't charge on official charger ( only charges on crap poundland one) and battery is loosing 1% every two minutes! I've closed all apps and reset the complete phone but no luck. Any one know what else I can try apart from a new phone?
I have done a factory reset at 45% battery. After the reset it's still hot and at 35% now
-
MY IPhone will not let me back up my phone or download the IOS 7 update because it says i do not have enough storage space. But I deleted all of my apps and pictures just to update it and it still wont let me do it. What should I do?
Contact iTunes to re-enable your account at expresslane.apple.com
You can reach them by chat or email. -
I cannot download the IOS 5 with Itunes. Always appear this message ( err= -3259) what can I do to solve this problem?
It's a connection timeout error. Google for a copy of iOS 5.0.1 and download it to your computer. Prepare to restore your iPhone but hold down Option (Mac) or Shift (Windows) when clicking Restore to bring up an explorer where you can manually install iOS 5.0.1 on your device, since you do not require a full download from the Apple Servers other than to verify your iOS build being installed.
-
I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.
I live in South Africa, and I had the same problem with my iPhone 4.
After weeks of frustration and swearing, I was in the process of restoring my phone to a previous iOS. To do that you need to turn the "Find my iPhone" option off, since i turned it off, my problem was solved. No need to repair anything or revert back to old iOS.
***** that i cant use Find my iPhone, but atleast i can use my phone. -
I downloaded the iOs 7, after went to sync it with my computer but it said I needed to update my iTunes, so I went to download the 11.1 and it said I needed a newer version? 10.6 (or something like that)
And so now I can't sync my phone...
Any suggestions? Besides throwing my computer out!! haha
My macbook is older.. bought in.. 2009. So I realize things may not work exactly the same.Yeah really!
One thing depends upon the other then nothing works or is no longer compatible.
I don't blame ya for wantin' to throw your computer out! Ha-Ha! -
AIR-CAP3602E-E-K9 can not download autonomous IOS image ?!
Hi all.
AIR-CAP3602E can not connect to tftp after format flash. Flash has been erased to free space for autonomous IOS.
When I reset it using mode button , I've got this on the console screen :
IOS Bootloader - Starting system.
flash is writable
FLASH CHIP: Macronix Mirrorbit (00C2)
Xmodem file system is available.
flashfs[0]: 1 files, 1 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31997952
flashfs[0]: Bytes used: 1536
flashfs[0]: Bytes available: 31996416
flashfs[0]: flashfs fsck took 11 seconds.
Reading cookie from SEEPROM
Base Ethernet MAC address: 7c:ad:74:xx:xx:xx
Ethernet speed is 100 Mb - FULL Duplex
Mode button pressed.
Mode button held for at least 20 seconds.
process_config_recovery: set IP address and config to default 10.0.0.1
process_config_recovery: image recovery
image_recovery: Download default IOS tar image tftp://255.255.255.255/ap3g2-k9w7-tar.default
examining image...
DPAA Set for Independent Mode
DPAA_INIT = 0x0
%Error opening tftp://255.255.255.255/ap3g2-k9w7-tar.default (connection timed out)
issuing command arp I see only this
ap: arp
255.255.255.255 ff:ff:ff:ff:ff:ff 0 25
configuring it manually :
ap: set
DEFAULT_ROUTER=10.0.0.1
IP_ADDR=10.0.0.1
NETMASK=255.255.255.224
ap: ether_init
Initializing ethernet port 0...
Ethernet speed is 100 Mb - FULL Duplex
ap: tftp_init
ap: flash_init
Initializing Flash...
...The flash is already initialized.
ap: tar -xtract tftp://10.0.0.2/ap3g2-k9w7-tar.default Flash:
and I've got this:
extracting info (285 bytes)Flash:/info: permission denied
Then I tried arp again
ap: arp
255.255.255.255 ff:ff:ff:ff:ff:ff 0 299
10.0.0.2 00:1f:c6:xx:xx:xx 0 299
ap:
This is the TFTP log:
===============================================
TFTP log
Connection received from 10.0.0.1 on port 1025 [01/02 19:18:03.631]
Read request for file <ap3g2-k9w7-tar.default>. Mode octet [01/02 19:18:03.631]
Using local port 52999 [01/02 19:18:03.633]
TIMEOUT waiting for Ack block #1 [01/02 19:18:18.647]
===============================================
Tftp timeout is set to 30 s
Thanks in advance for any helpWhat TFTP server are you using? Try either 3CDeamon or TFTPd32. Also make sure the MD5 has matches for the image you download. This will verify the image is indeed good.
Sent from Cisco Technical Support iPhone App -
Why is it taking so long to download the iOS 7.0.2 ?
Why is it taking so long to download the iOS 7.0.2 ?
If you're doing the full update it's almost a gig of data, take a bit to download that. It usually comes down to your internet connection.
-
I just got this new ipod 3. I plugged it into the computer and i have itunes and it updated to the IOS 4.2.1 and now i have downloaded the IOS 4.3 to my computer but now how do i down load it to my ipod. ? when i open up itunes with my ipod and click summary below the picture is said backups and options. But nothing about updates. Please help ASAP!
If you can't download using your phone, then just download it from Itunes and then sync your phone.
-
How do I upgrade the iOs on my ipad1 to version5? I've tried through itunes many times, but I get a message that says that the download was interrupted and i should try again later. Can i download the iOS file to my PC and transfer it to the ipad? How should I do that?
Thank you!
Disabling firewall and AV did the trick!
Kudos.
Alex -
I went to download the Yahoo! app on my iPod and it said I had to download the iOs 6.1.3 to get the app. I did so and I also dowloaded the newest iTunes on my computer. I had all my pictures and apps backed up on iCloud. After the update I checked my pictures and they were all gone. I also looked at my apps and most of them are gone and for a couple of free apps that I made purchases within, the information was erased. For example, I had the free version of the Harry Potter Spells app. Inside the app I bought the spell packages and when I got the game back on my iPod after the update, the information was erased. That's not fair especially because I paid for those and iFeel as though Apple has ripped me off. (Please pardon my pun.) But what I really want to know is if there is someway to retrieve them?
Restore from iCloud Backup step by step
1. Erase all contents and settings (Settings>General>Reset>Erase all content and settings)
2. You'll be asked twice to confirm
3. You'll see Apple logo and progress bar
4. You'll see a big iPad logo on screen
5. Configuration start
6. Set language
7. Set country
8. Enable Location Service
9. Select network, enter password and join network
10. You'll be given 3 options (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
11. Selected Restore from iCloud Backup
12. You'll be required to enter Apple ID and Password
13. Agree to Terms and Conditions
14. Select Backup file
15. You'll see progress bar
16. Red slider will appear; slide to unlock; step #1 to #16 is fast
17. Pre-installed apps will be restored first
18. Message: Purchased apps and media will now be automatically downloaded
19. You'll see a pageful of apps with Waiting/Loading/Installing
20. When the restore process is complete, your device will restart. You should connect the device to iTunes to sync data not contained in the backup (such as music, videos, apps, and so on). -
Hi, I bought an iPod 2 and I jailbreaked it before. I tried to download the iOS 5.0.1 from the Settings icon on my iPad 2 but then my iPad wouldn't turn on anymore and it kept on showing a screen with an arrow pointing to an iTunes symbol. I later learned that this was the recovery screen so I tried to put it out of the recovery mode by pressing the home button and power button simultaneously, but the screen kept on returning back to the recovery screen. I could not restore the iPad 2 on iTunes either, so I downloaded Tiny Umbrella 5.10.01 and tried to save the shsh. However, under the recovering devices section on the left side, my iPad did not appear and I only got a device titled ?18092..... I tried to save the shsh of this ?18902... anyways but this did not work. So, I clicked on the device and pressed the exit recovery but then my iPad2 screen went black with a white apple logo in the middle. This logo keeps on dimming and disappearing and even when I plug my iPad 2 to the computer, neither my iTunes nor the Tiny Umbrella notice it. I need urgent help!
eddiekero wrote:
Hi, I bought an iPod 2 and I jailbreaked it before. I tried to download the iOS 5.0.1 from the Settings icon on my iPad 2 but then my iPad wouldn't turn on anymore and it kept on showing a screen with an arrow pointing to an iTunes symbol. I later learned that this was the recovery screen so I tried to put it out of the recovery mode by pressing the home button and power button simultaneously, but the screen kept on returning back to the recovery screen. I could not restore the iPad 2 on iTunes either, so I downloaded Tiny Umbrella 5.10.01 and tried to save the shsh. However, under the recovering devices section on the left side, my iPad did not appear and I only got a device titled ?18092..... I tried to save the shsh of this ?18902... anyways but this did not work. So, I clicked on the device and pressed the exit recovery but then my iPad2 screen went black with a white apple logo in the middle. This logo keeps on dimming and disappearing and even when I plug my iPad 2 to the computer, neither my iTunes nor the Tiny Umbrella notice it. I need urgent help!
At this point only a restore will fix your issue.
Maybe you are looking for
-
Hi, I am trying send programtic request to my apache server which is configured with SSL without CA certificate. So when I am sending request to server it is returning me following exception : javax.net.ssl.SSLHandshakeException: sun.security.validat
-
Cannot add users to Calendar Server
Cannot add users to Calendar Server <P> You may get the following error when you try to add users to a new installation of Calendar Server 3.0: <P> Could not bind as [nsCalXItemId=10000:00001, o=Ace Industry,c=US].<br> Create ObjectClass for user [cn
-
Installing Essbase 11.1.2.2 client
Hi, I want to install Essbase 11.1.2.2 client. From e delivery site should i download only "EPM System Release 11.1.2.2.0 Client Installers for Microsoft Windows V31866-01" or any file is also required? During installation should i run essbaseclient.
-
Always Find (Cntrl+F) From Top of Page
I have a question about using the find box (cntrl+F) to search for text on a page. I often search for some text, then hit cntrl+f to search for something new, and again...but find it annoying that it searches from my current position on the page. Is
-
How can I deactive software for Photoshop Elements 10 from my computer.
How do i deactivate software for Photoshop elements 10 from my computer. Help does not appear to have a deactivate command