HT1338 hi has anyone been using the new OS Mountain Lion recently released?

I have had nothing but frustration with the new Mountain Lion release
First all my printer drivers have failed and I have had to re-load software drivers to get it to work.
Next the Safari version needed to operate this engine is not supported by my medical software company.  I am forced to go back on Safari 5 instead of 6.
I am patient but am losing my mind.

Start by removing your worthless "anti-virus" software according to the developer's instructions. That's as likely as not to be causing the problem. Reboot and test. Back up all data before making any changes.

Similar Messages

  • Has anyone sucessfully used the new Winclone 3.2 to backup and restore  Bootcamp partittion with Windows 7 Ultimate on MBP with Lion 10.7.3?

    Bought late 2011 MBP 17" with Bootcamp partition (Windows 7 Ultimate) and Lion OS 10.7.3
    I am trying to make a backup of Bootcamp partition before I start using my laptop but it proves to be a difficult task.
    I don’t have any installation disk for Windows 7 and I am afraid that, if a disaster strikes and I loose the HDD, my copy of Windows will be gone. 
    The only way to restore Windows partition according to what I read so far is to do the following:
    • Use Windows to backup data from BootCamp Partition
    • Reinstall OS Lion formatting full hard drive in the process
    • Use BootCamp Assistant to create BootCamp partition
    • Install Windows 7 on bootcamp partion
    • Use Windows 7 to restore data from backup file created in the first step
    The only problem is that I don't any image or disk to re-install Windows 7. With Windows 7 I can create only 'repair disk' (for what it is worth) or system image but according to other users it would format the whole drive including OS Lion partition when reinstalling
    Winclone 3.2 seems like the answer to my prayers but would like to hear from the users if it worked for them (most imprtantly, did the restore work?). 

    Got the response from Winclone regarding my confusion in step 18 of the procedure to create bootcamp backup.  The message displayed on the screenshot under step 18 can be ignored.  It refers to creating a Windows partition using Boot Camp Assistant but in fact this partition has already been created in earlier steps using Disk Utility. 
    I bought Winclone 3.3 as it promises to make backup and restore of Bootcamp partition with Windows 7 on it really easy, the steps to do this task are easy and well documented, and the owner of the program was very prompt responding to my queries.
    I performed the following as an insurance against disaster prior to creating Winclone image:
    Since my Windows 7 came pre-installed but without any installation disk I used Windows 7 to create 'Windows 7 system image' . From what I read on forums the system image created using Windows 7 apparently can't be used to easily restore Boot Camp partition (as it wipes out OS X in the process).  I created this image as a last resort backup rescue - some users reported that it can be used to recover Windows but the process is painful and involve a number of steps, swapping hard drives, and paid software to assist in the process.  I did not bother to make notes on this process - thanks to Winclone I am not suppose to need this backup if everything works as promised
    I also created 'Windows 7 repair disk' prior to running Winclone.  Not sure what the value of it will be but again, this is something I did just in case I need it in the future
    Then I installed Winclone 3.3 and created Windows 7 Ultimate Boot Camp image without any problems (on MBP running Lion 10.7.4).  My Winclone image file of 150GB Windows 7 Boot Camp partition prior to installing any programs and without any data on it ended up being nearly 8GB (saved to the external USB HDD).
    I have not restored and don't plan to restore the Winclone 3.3 image just to test if it works (don't want to risk loosing my perfectly well running Windows 7 in case of any disaster).  So ultimately only time or experience of other users will tell me if I spent my money well buying Winclone 3.3.  I  know it worked for you JBLTZ so hopefully it will work for me when I need it one day.
    Cheers
    Swavek

  • Has anyone began using the new iStick?  I cannot figure out how to save files from my iPad to the new iStick?

    I have recently bought the new iStick and absolutely love it!  The only question that I have is figuring out how to open a file on my iPad and saving it to the iStIck.  Does anyone have any experience with this?

    Here's the app and an article. Sorry I never used one.
    iStick by Ming Yanhttp://recode.net/2014/07/15/finally-a-usb-thumb-drive-for-the-latest-iphones-an d-ipads/
    https://appsto.re/us/FAunJ.i
    http://recode.net/2014/07/15/finally-a-usb-thumb-drive-for-the-latest-iphones-an d-ipads/

  • Has anyone successfully used the Intuit Quicken compatible with Lion upgrade for investment tracking?

    Has anyone successfully used the Intuit Quicken compatible with Lion upgrade for investment tracking?

    Although I gave up investment tracking for personal reasons (I had used Quicken Deluxe 2002 for many years for that reason), my understanding is that the new Quicken 2007 for Lion/Mt. Lion is completely the same feature wise as Quicken 2007 for PPC.  It will run on Snow Leopard, too.
    For $15, why not download it and just try it and LET US KNOW!

  • I am getting error "The disk is used for Time Machine Backup" when installing the new OSX Mountain Lion upgrade"

    I am keep getting this error "The disk is used for Time Machine Backup" when installing the new OSX Mountain Lion" when doing the upgrade to newly OS.

    The folder would be at the root of your hard drive. Double-click Macintosh HD and look there.
    If it isn’t there, I’m not sure what it is seeing.

  • In Finder , why i can't go back and forward using the trackpad in Mountain Lion?

    In Finder , why i can't go back and forward using the trackpad in Mountain Lion?

    Hi. I also got the same problem but just learnt a way to resolve it. No need for 3rd party software.
    If you don't care much about the Three finger drag gesture, and just want to swipe between pages in Finder and web browsers, please follow these:
    System Preferences/Trackpad/More gestures/Swipe between pages/Scroll left or right with 2 fingers. This option works solely for web browsers.
    In order to swipe between pages in Finder, web browsers and other apps as well,change the option to Swipe with two or three fingers. (3 for Finder and apps, 2 for web pages)
    If you also want to use Three-finger drag to move windows and drag-select:
    The problem occurs once you change to "Swipe with 2 or three fingers", Lion will automatically disable/uncheck the Three finger drag function in Trackpad/Point&Click. Or the other way around, you tick Three Finger drag, Swipe between pages automatically switches to Scroll with two fingers because these 2 functions are overlapped.
    My solution is:
    stick with initial option Scroll with two fingers for navigating between web pages.
    Re-tick Three finger drag in Point&Click.
    Use combination: Option+Swipe 4 fingers for Finder and other apps (although it functions reversely, Swiping left to go backward, swipe right to go forward)
    My current gesture routine:
    - Swipe between web pages: Scroll with two fingers.
    - Swipe between pages in Finder and other apps: Combination Option+swipe 4 fingers
    - Swipe between full-screen apps (desktops): Swipe left or right with 4 fingers
    - Drag select and navigate windows: Three finger drag
    - Mission Control - Swipe up with 4 fingers. (avoid conflict with three finger drag)
    * You can actually use combination Option+Swipe 4 fingers for everything (apps, finder, web pages) but I personally prefer swipe 2 fingers for web browsing. It's just easier and quicker and avoid conflicts with other gestures.
    Hope this help.

  • Has anyone used the new Quicken for Lion?

    Before updating to Lion and purchasing the new Quicken which is compatible with Lion, I wanted to see if others have used it yet and if there are any major problems.

    I have not experienced any problems with the new Quicken for Lion.  It's quite different from the old version but it seems to work quite well.  After installing Lion, the old version of Quicken was deemed useless.  It will not run on Lion, so access it before you update if you intend to extract any info from it.  Good luck!

  • Has anyone tried syncing the new iPod Touch 4 with OS 10.4.11?

    I know the "official" Apple spec's state the new iPod Touch 4 are
    for it to sync with OS 10.5.8 and use iTunes 10 .... but has anyone been
    successful in using the new iPod Touch 4 with OS 10.4.11 and iTunes 9.2.1?

    Does iTunes see the iPod? If not
    iOS: Device not recognized in iTunes for Mac OS X
    or
    iOS: Device not recognized in iTunes for Windows
    You need iTunes 10.7 or later on the computer
    The iPod touch uses different drivers than the Nano

  • Has anyone successfully used the ZTE Open C with an AT&T microcell?

    I have a ZTE Open C and have had no issues with initial setup w/AT&T. However, like most newer phones the voice signal reception is very weak.
    I've had an AT&T Microcell before, but I don't have one now. For those that are unaware, the microcell allows 3G phones to connect via a 3G signal, but the call is routed through a home broadband internet connection.
    Has anyone successfully used a ZTE Open C w/Firefox OS AND used an AT&T microcell? If yes, did you need to do anything special on the phone or with Firefox OS.

    I don't use a ZTE Open C, however, I do have a ZTE Open (Original) on AT&T and so I'll see if I can help ;D
    I know someone who has a Microcell, and I have used it myself a few times. However, the microcell only works if you have entered in your phone number into settings of the Microcell.
    Check the Microcell settings.
    Check the data connection settings on your FxOS device
    Make sure your Microcell is properly connected to WiFi
    and check the AT&T support page for more info
    For a while, it actually hasn't actually worked for me. I apologize if this doesn't solve your problem :D

  • I just download the new sox mountain lion

    where is the "bounce" option in mail using the new mountain lion? thanks

    Julie,
    Saw this in a similar posting. It was added by a user named "unclecal". He claims this works for him. Not bothering to "bounce" e-mails back, I cannot attest to this myself......
    "Here is a app to put the button back that works even in Mountain Lion...
    http://download.cnet.com/Restore-Bounce-Mail-Button-To-Lions-Mail-app/3000-20429 _4-75629050.html  "
    You probably want to check out the app first.......
    Hope it helps,
    Bill
     MacBook Pro (15-inch Late 2011), Mac OS X (10.8.2)
     MacBook Pro, Mac OS X (10.7.5), 15in, 8GB RAM
     Mac Pro, Mac OS X (10.7.4), Dual 3.2GHz Xenons- MANY upgrades
     Mac Pro, OS X Mountain Lion (10.8.2), Mid-'12, 12-Core, 64GB RAM
     iPad, iOS 5.1.1
     iPad 2, iOS 6
     iPhone 4, iOS 6
     iPhone 4S, iOS 6

  • Has anyone actually used the Apple USB "rescue" drive on a 2011 MBA or Mac Mini?

    I am getting conflicting information as to whether the $69.00 Lion USB "Rescue drive" will function on a mid 2011 MacBook Air or a Mid 2011 Mac Mini. (Yes, I know it will work on the 2011 MacBook Pros).
    1) The local Apple Store Genius Bar personell say that it will not work. It has 10.7.0 Build 11A511, and the 2011 MBA's and Mac Mini's require at least 10.7.0 Build 11A2063 and 11A20621, respectively.
    2) Several people have answered this question in the Q&A section of the online Apple Store that it will work on a mid 2011 MBA.
    3) I contacted Apple, via the Chat system within the online Apple Store, and they are kinda sure that it will work. But in any case, if I were to get it to work it would ace my recovery partition, and forever NEVER let me use a recovery partition on that Mac again.
    So, I am left with the most reasonable avenue to obtain a correct answer. I ask if anyone has sucessfully used this drive on a mid 2011 MBA or mid 2011 Mac Mini.

    Given the nature of backups, my recommendation has always been to use a strategy that is unequivocally supported by Apple. As you already determined Apple Support unequivocally informed you that your proposal will not work, unless your router is an Apple AirPort Extreme or Time Capsule.
    The exhaustive list of devices supported by Time Machine amounts to the following:
    AirPort Time Capsule's built-in hard disk (any model)
    External USB hard disk drive connected to a Time Capsule (any model)
    External USB hard disk drive connected to an AirPort Extreme (current model only)
    A hard disk drive directly connected to your Mac
    That is all.
    Use whatever backup device you want, but you should be aware that this site is full of reports of misery from hapless individuals who had been using NAS devices for Time Machine backups, only to find that they were incomplete, corrupted, or useless when they were required. Apple won't care if you lose your data while using a Time Machine configuration specifically excluded from their technical support documents.

  • Hi guys, i would like to ask about the apple id.  Which at this time I have been using the new apple id, can I be able to continue updates all the applications that I have purchased by using the old apple id.

    Hey guys, I am newbie here ;(.. I have a question regarding my new apple id. at this moment i've still have all the applications that i've been purchased by using my old apple id.
    In case there are an update for the applications in my iphone, " Can i use my new apple id to update all the application that i've been purchased with my old apple id ". If its not possible to do, are there any suggestion for me to updates all the applications by using my new apple id ?
    Many thanks ;)

    Apps must be updated using the Apple ID used to originally download them to the device.
    If you cannot or will not use the old Apple ID, then you can delete the app, and then download it again using the current Apple ID.  Be aware that any paid apps will have to be purchased again.

  • Has anyone successfully used the Zoom R16 with Audition?

    I’ve tried just about everything, but can’t seem to get Audition to run with the Zoom R16.  As noted in a recent post, I updated both the Zoom R16 firmware and widows driver, but that doesn’t seem to make the 2 work harmoniously. 
    Has anyone had success getting the 2 to work together?  If so, what’s the trick?!
    Thanks in advance
    C

    CharlestonPro wrote:
    As noted in a recent post, I updated both the Zoom R16 firmware and widows driver, but that doesn’t seem to make the 2 work harmoniously.
    I'm intrigued - what is actually disharmonious?

  • Has anyone else used the WireTunes Axxess IPOD Car Kit?

    I have recently installed this hookup in my vehicle. it's pretty cool and works well. it displays the song title and info on my xm ready stereo. The only problem i have is when i skip to the next song it skips one too many and skips over the next to the next song. Does anyone have this product and have you had similar problems?

    that is true Angela...toyota uses the same unit for all the cars...the only issue they seem to have is when trying to integrate with the toyota's that have the factory NAV system, or the built in 5 disk changer in the dash.. I think the most flexible unit that I have found is this one....
    http://www.sounddomain.com/item/USSPA11TOY
    It allows you to use 2 different modes, one being direct control from the iPod, none of the others that I have found allow you complete control from the head unit, they all seem to want you to make up multiple playlists and treat those lists as a CD's in a trunk mounted cd changer...which to me seems a bit clunky.

  • Has anyone every used the CleanMyMac 2 feature and if so, would you recommend it?

    I was looking into signing up to beta test the new iOS Yosemite and I was reading that you need to clean up your Mac and back it up first before installing it and it was recommending you download something called CleanMyMac2.
    Not sure if it would be a good idea or not. Any thoughts?

    This may explain what you saw - an advertisement:
    It is not affiliated with or endorsed by Apple in any way.
    Clicking it reveals the following:
    ... after which it advocates creating a backup.
    All of this is horrible advice. Ignore it.

Maybe you are looking for

  • I am unable to get my iphone playlist when it is connected to my laptop

    Hello Gurus, When I connect my Iphone to my laptop, I am not presented with the playlist available on the iphone. Instead, I get a list of all the songs on the iphone in alphabetical order. I have been made to understand that it is because the laptop

  • Goods Supplier GS Vendor Partner for PO

    Hi, We have a vendor where we do not know where the goods are being supplied from until they arrive. I would like to be able to choose the GS partner when completing the goods receipt via MIGO - does anyone know if this is possible? Thanks, Steph.

  • Error 192 when tring to mount a .iso in toast

    Like the title says, when i try to mount a .iso in toast (titanium ver 10) i get a dialog box says 'operation could not be performed because of a osx error. error code = 192'. I have run disk utility on the .iso to make sure it wasn't corrupt or anyt

  • Tree: Format Text-Property (column-look)

    Hello everybody, I am using a tree UI element (Not TreeByNestingTableColumn) In the text-property I have to display different data. example: - name - street - city <u>at the moment it looks like this:</u><u>example</u> thefirstname       firststreet 

  • PSE 12 Not responding, it appears to load fine, but crashes 10 seconds later

    Hello,   I have Windows XP and had the product for a month.  This program worked fine less than a week ago, but today, it will not function.  I have not changed anything.  Please help, thanks.