HT1338 Hi im trying to download new software 7 ios?
Hi its not allowing me to istal new update
What exactly is happening when you try to install the update? Are you getting an error message? If so, what is it? Are you trying to update over the air or via iTunes?
= L.I.
Similar Messages
-
What is the problem when all you get is a picture of a charging cord and the itunes logo? I tried hooking up to my computer and itunes and it said I could not download the new software while it was in recovery mode but it won't let me do anything else. Any ideas?
I hope you have a backup if you don't want to lose your iPad contents. You have to restore the iPad now using iTunes on your computer. That's what the message on the screen means.
Take a look at this.
http://support.apple.com/kb/ht1808 -
Trying to download new software..Help!
I have a late 2008 Macbook with the 10.6.8 software. I am trying to download the new 10.9.1. I go through the app store and click download, but it does nothing. What do I need to do to get it downloaded? I am basically trying to get the new Pages downloaded (which requires the new software) so I can use it for school and have it communicate through Icloud with my IPad and IMac when needed.
Is your MacBook the Aluminum Unibody?
-
Trying to download new software from 3.1 to newer software
trying to download software from 3.1.3 to newer software can someone please advise?
He likely has a 1G (original) iPod touch. Those can only go to iOS 3.1.3. A 2G can go to 4.2.1.
Identifying iPod models -
Trying to set up new software.. get to the terms and conditons screen , hit agree and not happens
Do you have your Apple ID in Settings > iTunes & App Store > Apple ID: ?
-
Is anyone else having trouble downloading the newest software update for the iphone? I have tried to run it several times, only to keep getting the error message. I am online and it is telling me the network has timed out.
Start by working through the suggestions in this Apple support document. The cause could be any AntiVirus or Security you have installed and running on your system.
http://support.apple.com/kb/ts3125
B-rock -
Itunes will not open after trying to download new software
I went to download the new version of itunes and it said there was an error and now it wont let me open itunes at all and suggest reinstalling...will i loose my music that I have downloaded from cds and not purchased from itunes?
read here http://support.apple.com/kb/TS5376 you will not lose any info it is all in your music folder.
-
I'm trying to download new software and haven't done so in over a year?
I keep getting a warning that i'm going to loose music / photos if i do this - can you recommend a solution?
Follow these instructions., When you restore from backup like the instructions say your iPod will also be updated.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities -
trying to download new software for ipad but get the same message coming up which is there was a problem downloading the software the network connection
timed out make sure your network connections is active or try again later. I have tried about 5 times to download this can anyone helpHave you disabled any firewall and security/antivirus programs? This seems to have helped the vast majority of people who have posted the same problem in this forum.
-
HT1222 wont let me download new software i need to fix a calender bug ???
trying to download new software its telling me no i need to fix a calender bug?????
Click Store>Check for Available Downloads
-
As I downloaded new software upgrade in my iPod nano 7 th gen and also new iTunes upgrade then all data on my iPod got erased and now when I am trying to sync it again then sync button is disabled on the windows screen . Kindly help
From the OP: "My old computer got a virus and when that happened all my music was lost. "
They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod. -
ok i have a advent roma laptop with window 7. my itunes used to work fine, completely. every time i plugged in my ipod it was ok. recently my ipod was not working so i never bothered with itunes, however i have movies/tv prog that i purchased and would like to view them. i have an ipod nano from about 5 years ago, the problem with thet is, it switches on, but the circular control panel does nothing, all you can do is lock and unlock it - nothing else.
i tried to download new version of itunes, then uninstalled my origonal version, incase it was corrupted etc, i then again tried to down load new version and also version that is windows 64bit. still when i select the downlaod to open as son as it is finnished nothing happens. and now my desktop shortcut has dissapeared. before when it was there, id double click it, nothing, right click to open it, nothing.
im not the best technically minded but i just dont see what im doing wrong here, please helpPerhaps it would be helpful for you to view the page source code of this page
http://www.alanwork.com/
As you can see, the submenu code links are immediately below the top level code, and are
wrapped in their own <UL> </UL> tag pairs.
Hope that helps -
Trying to Download a Software Image to Cisco 2800 series router through TFTP Using the tftpdnld ROMmon Command
and I am getting an Error , I cant figure out what I am doing wrong. I have also pasted my display down here can someone help me out, thanks in advance, I am still new to this utility.
My questions are How do you direct this utility to point to the desktop or the TFTP folder
does FE_PORT: Fast Ethernet 0 imply or point to Fa0/0 on my router
My router is suppose to have 10.0.0.3 255.0.0.0
Gateway of 10.0.0.1 255.0.0.0
My TFTP Server 10.0.0.2 255.0.0.0
How do I get the MAC address of the Router or the TFTP Server and which one is required?
my Ethernet port is 100Mb/Sec I cant tell whether it is full duplex or not so How do i set this FE_SPEED_MODE: Auto???
=====================================================================================
rommon 10 >
rommon 10 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
?=0
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
TFTP_FILE=
rommon 11 > TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
rommon 12 > TFTP_CHECKSUM=0
rommon 13 > SET
monitor: command "SET" not found
rommon 14 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
?=0
TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
TFTP_CHECKSUM=0
rommon 15 > tftpdnld
IP_ADDRESS: 10.0.0.3
IP_SUBNET_MASK: 255.0.0.0
DEFAULT_GATEWAY: 10.0.0.1
TFTP_SERVER: 10.0.0.2
TFTP_FILE: c2800nm-adventerprisek9-mz.124-24.T4
TFTP_VERBOSE: Progress
TFTP_RETRY_COUNT: 18
TFTP_TIMEOUT: 7200
TFTP_CHECKSUM: No
TFTP_MACADDR: 30:37:a6:49:35:a8
FE_PORT: Fast Ethernet 0
FE_SPEED_MODE: Auto
Invoke this command for disaster recovery only.
WARNING: all existing data in all partitions on flash: will be lost!
Do you wish to continue? y/n: [n]: y
ARP: address resolution for 10.0.0.2 timed out.
ARP failed with failure code 1. TFTP transfer aborted.
TFTP: Operation terminated prematurely.
rommon 16 > " not found
rommon 17 >FE_SPEED_MODE=2
variable name contains illegal (non-printable) characters
rommon
rommon 18 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
TFTP_CHECKSUM=0
?=0
rommon 19 > tftpdnld [ur]
usage: tftpdnld [-hr]
Use this command for disaster recovery only to recover an image via TFTP.
Monitor variables are used to set up parameters for the transfer.
(Syntax: "VARIABLE_NAME=value" and use "set" to show current variables.)
"ctrl-c" or "break" stops the transfer before flash erase begins.
The following variables are REQUIRED to be set for tftpdnld:
IP_ADDRESS: The IP address for this unit
IP_SUBNET_MASK: The subnet mask for this unit
DEFAULT_GATEWAY: The default gateway for this unit
TFTP_SERVER: The IP address of the server to fetch from
TFTP_FILE: The filename to fetch
The following variables are OPTIONAL:
TFTP_VERBOSE: Print setting. 0=quiet, 1=progress(default), 2=verbose
TFTP_RETRY_COUNT: Retry count for ARP and TFTP (default=18)
TFTP_TIMEOUT: Overall timeout of operation in seconds (default=7200)
TFTP_CHECKSUM: Perform checksum test on image, 0=no, 1=yes (default=1)
TFTP_MACADDR: The MAC address for this unit
FE_PORT: 0= (default), 1
FE_SPEED_MODE: 0=10/hdx, 1=10/fdx, 2=100/hdx, 3=100/fdx,
5=Auto (default)
TFTP_DESTINATION: The flash destination device for the file
flash:(default), usbflash0:, usbflash1:
Command line options:
-h: this help screen
-r: do not write flash, load to DRAM only and launch image
rommon 20 > tftpdnld
IP_ADDRESS: 10.0.0.3
IP_SUBNET_MASK: 255.0.0.0
DEFAULT_GATEWAY: 10.0.0.1
TFTP_SERVER: 10.0.0.2
TFTP_FILE: c2800nm-adventerprisek9-mz.124-24.T4
TFTP_VERBOSE: Progress
TFTP_RETRY_COUNT: 18
TFTP_TIMEOUT: 7200
TFTP_CHECKSUM: No
TFTP_MACADDR: 30:37:a6:49:35:a8
FE_PORT: Fast Ethernet 0
FE_SPEED_MODE: Auto
Invoke this command for disaster recovery only.
WARNING: all existing data in all partitions on flash: will be lost!
Do you wish to continue? y/n: [n]: y
ARP: address resolution for 10.0.0.2 timed out.
ARP failed with failure code 1. TFTP transfer aborted.
TFTP: Operation terminated prematurely.
rommon 21 >What I notice in the original post is this error
ARP: address resolution for 10.0.0.2 timed out.
which says that the router is looking for the 10.0.0.2 server but not getting response to its arp request. Can the original poster clarify for us how the device that has the image file is connected to the router that has the problem? Also what kind of device is 10.0.0.2? Is it a PC running TFTP server software or is it something else?
HTH
Rick -
I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows
Hi, stig2013.
I would recommend the steps in the article below. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If you are receiving an error message, find the exact error number that you recieved in the article below and process the steps.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
Cheers,
Jason H. -
I am trying to install new software on my Imac and my keychain asks for my password, I type it in, it says it is wrong, I do it again, wrong, it gives me a hint, same one I have been using, wrong again, so I cannot get the new soft ware to download, how do I get my passwork on the keychain to work or how do I change it?
What model iMac and what version of the Mac OS is installed? "About this Mac" from the Apple menu is a good place to start.
Maybe you are looking for
-
Force resolution for external monitor
I have a NEC MultiSync LCD 2690WUXi which supports a resolution of 1920 x 1200 pixels. I have it connected to my MBP i7 (early 2010) via DVI -> Mini-DV. However, the monitor preference pane only shows a max. resolution of 720p or 1024 x 576 pixels: T
-
PSE 6 fonts usable anywhere else?
Can the fonts in PSE 6 be used in any other Windows apps? Or are they embedded in the PhotoShop application itself?
-
Hi, I have a scenario where the user is sending Invoice output to his customers by Email,while sending the email output he received from the system a delivery failure report stating that his message could not be delivered to his receipient's email ad
-
Web dyn pro screen design(view design)
Hi guys i find it extremely tough managing the UI inside the views, i having to take so many layout designs(matrix , row etc ) and give blank(invisible) UI etc to put what i want where i want, it was a ton easier with ABAP , i think i'm looking at it
-
How can I shift my acrobat from old computer to new one?
I have intalled adobe acrobat standard on last November to my computer. Now this computer broke down and I would need to move this software to new computer. How is this possible? I have serial number.