HT1338 How do I test cd rom

Hi, I have a Mac Mani with Snow Leopard and I was able to use the SL CD to update my OS and games work on CD drive but I'm unable to play pre recorded music, not burned CD's, just CD's that were bought at a music store. Any help? Thank you! CR

Your drive may need cleaning. Cleaning kits can be purchased from any store that sells CD/DVDs.

Similar Messages

How can I test my thunderbolt port? It's not working after the update to 10.10.1

I have been using my computer with the Thunderbolt Port for a while and after updating to 10.10.1 and after I while of using my computer I tried to use the thunderbolt port with my external monitor.. and it doesn't work at all.. video doesn't come out.. I tried a different screen with the mini adapter from thunderbolt to HDMI and another with thunderbolt to VGA and in both adapters I don't get video from my mac.
Any idea how can I test my Thunder bolt port?
This is what I have done:
1 cable adapter thunder bolt to mini HDMI to an LCD screen with HDMI : No video, but my computer detects that there is something connected
2 cable adapter thunder bolt to VGA to an LCD screen with VGA : No video, but my computer detects that there is something connected
3 cable adapter thunder bolt to mini HDMI to an 40' TV with HDMI : No video, but my computer detects that there is something connected
All the test pass from the Hardware test at the startup (press D at boot time).
Any ideas? my guarantee it's expired and no coverage. Due the nature of where the port it's installed, if this is a hardware problem seems that I will (may be) have to buy the Logic Board.. no good. No bueno!!
Thanks!!!

restore iPhone

How can I test a RTP(send&receive) application on the same computer?

I an writing an application that lets one computer (A) sends a media file to another computer (B) and B receives it and play it.
But how can I test this application on the same computer
Eg.Transmitter: localhost 43000
Receiver: localhost 43000
It will retuen an error since the port number is alreeady used by another program.
I know if I test it on different computers, it should be fine, but how can I test it on the same computer?

JMStudio sends RTP packets from the same UDP port as the specified in the destination port, so you can't try it in the same computer. The examples provided in http://java.sun.com/products/java-media/jmf/2.1.1/solutions/index.html follow this rule aswell, but it's easy to modify it:
rtpMgrs[streamid]=RTPManager.newInstance();
localAddr = new SessionAddress( InetAddress.getLocalHost(),localDataPort);
//By deafault, in the examples, they use remote DataPort instead of localDataPort.
//You can specify localDataPort to any different free port number, or to
//SessionAddress.ANY_PORT if you don't mind the port number
remoteAddr = new SessionAddress(destIpAddr,remoteDataPort);
rtpMgrs[streamid].initialize(localAddr);
rtpMgrs[streamid].addTarget(remoteAddr);

How can you test the video card?

I just got a cinema display and I am having trouble calibrating it.
I just notice that when I open up bridge CS4 it takes awhile for it to refresh. When I go to film strip view and click on a picture it will not diplay it.
Then I change views and there is a line down the middle of the display where it gets update but the left side does not.
Any thoughts on what it could be?
Video card of is it the monitor?
How can I test it?

The only ways I can think of to test the card are XBench and the Apple Hardware Tests (insert Install DVD and restart while holding down 'd')

How do I test a Java card applet with different AIDs on the fly?

... Like sweeping cards from employees in a queue of people lining up in the morning?
When I created my applet, the aid is a fixed value inside the class.
Whenever I wanted to test it with another value, I changed that AID and rerun the applet.
I find it very cumbersome that needs to be rerun and rerun, over and over again.
How do I test the applet easily with any values of AIDs that I'd like to put in, on the fly.
I know I can't simulate the sweeps of card in the applet because I can't have a main method with a signature
of Strings[] args or String[] args. I can only have JUnit to help me out, but still java card doesn't allow either
main(Strings[] args) or TestCase to inherit from.
Thanks
Jack

your question is hard to understand but:
an applet always has one definite AID and you cant change it after install as far as i know
a) you want to test many cards with diffrent AIDs?
->send a list of select commands and check the return values
b)you want one card with the same applet to be available for many AIDs?
->install many dummy applets forwarding the commands to one core applet
c)i think i didnt get your point :/

How can i test if i'm in the EOF of my file text in applescript?

hello
i want to known how can i test my EOF of my file text or if i meet "Plan N°" when i read each linesdxhezdcxezkchcochzhejc
my file text :
Plan N°1
94.64%
MDF_280;;3050;1850;1
piece;0;0;500;500;0;AAA
piece;0;504;500;500;0;AAA
piece;0;1008;500;500;0;AAA
piece;0;1512;500;500;0;AAA
piece;0;2016;500;500;0;AAA
piece;0;2520;500;500;0;AAA
chute;0;3024;26;500
piece;504;0;500;500;0;AAA
piece;504;504;500;500;0;AAA
piece;504;1008;500;500;0;AAA
piece;504;1512;500;500;0;AAA
piece;504;2016;500;500;0;AAA
piece;504;2520;500;500;0;AAA
chute;504;3024;26;500
piece;1008;0;500;500;0;AAA
piece;1008;504;500;500;0;AAA
piece;1008;1008;500;500;0;AAA
piece;1008;1512;500;500;0;AAA
piece;1008;2016;500;500;0;AAA
piece;1008;2520;500;500;0;AAA
chute;1008;3024;26;500
piece;1512;0;700;300;1;BBB
piece;1512;704;700;300;1;BBB
piece;1512;1408;700;300;1;BBB
piece;1512;2112;700;300;1;BBB
chute;1512;2816;234;300
chute;1816;0;3050;34
Plan N°2
93.58%
MDF_280;;3050;1850;1
piece;0;0;300;700;0;BBB
piece;0;304;300;700;0;BBB
piece;0;608;300;700;0;BBB
i want test
i : line 1 ok next
i <- 94... ok -< next
if i == MDF_280 => loop (exit while EOF or when i == Plan N°)
do ....
end loop
soory but i'm novice in apple script
and i'm french
i need to improve my english
this is my applescript
repeat with l in lesLignes
if (l as text) starts with "MDF_280" then
while ???? (!= EOF or "MDF_280") do ....
if (l as text) starts with "piece" then .....
end if
end if
end repeat
THANKS

property sString01 : "Plan N" -- String to search for.
property sString02 : "MDF_280" -- String to search for.
set uFile to (choose file) -- Select file to process.
set tText to read uFile -- Read contents of selected file.
repeat -- Cycle through contents of 'tText'.
set {offset01, offset02} to {offset of sString01 in tText, offset of sString02 in tText} -- Obtain offset locations of 'sString01' and 'sString02'.
if (offset01 = 0) then exit repeat -- If 'sString01' does not exist, exit repeat loop.
-- Adjust content of 'tText' as to position of 'offset02' relative to 'offset01'.
if (offset02 > offset01) then set tText to get (characters (offset02 + (count sString02)) through (count tText) of tText) as string
set offset01 to (offset of sString01 in tText) - 1 -- Obtain next offset of 'String01'.
if (offset01 < 1) then set offset01 to (count tText) -- Correct 'offset01' to obtain remaining contents of 'tText'.
set tmpText to get (characters 1 through offset01 of tText) as string -- Obtain subset content of 'tText' - between 'sString02' and next 'sString01', of end of 'tText'.
display dialog tmpText -- Display obtain subset of content of 'tText'.
end repeat
Since you posted 'how can i read a file text by applescript', and have not replied to others posts; nor marked any reply as 'answered' or even 'helpful'; and, I anticipate you creating a new post asking how to incorporate one of the 'how can i read a file text by applescript' replies into the above (or similar) code - a revised version of 'how can i read a file text by applescript' incorporated within the above code is provided below.
property sString01 : "Plan N" -- String to search for.
property sString02 : "MDF_280" -- String to search for.
property sString03 : "piece" -- String to search for.
property sString04 : "chute" -- String to search for.
set uFile to (choose file) -- Select file to process.
set tText to read uFile -- Read contents of selected file.
repeat -- Cycle through contents of 'tText'.
set {offset01, offset02} to {offset of sString01 in tText, offset of sString02 in tText} -- Obtain offset locations of 'sString01' and 'sString02'.
if (offset01 = 0) then exit repeat -- If 'sString01' does not exist, then exit the repeat loop.
-- Adjust content of 'tText' as to position of 'offset02' relative to 'offset01'.
if (offset02 > offset01) then set tText to get (characters (offset02 + (count sString02)) through (count tText) of tText) as string
set offset01 to (offset of sString01 in tText) - 1 -- Obtain next offset of 'String01'.
if (offset01 < 1) then set offset01 to (count tText) -- Correct 'offset01' to obtain remaining contents of 'tText'.
set tmpText to get (characters 1 through offset01 of tText) as string -- Obtain subset content of 'tText' - between 'sString02' and next 'sString01', of end of 'tText'.
set tPars to paragraphs of tmpText -- Obtain list of 'piece' entries.
repeat with i in tPars -- Cycle through list.
if (i begins with sString03) then
set {var01, var02, var03, var04, var05, var06} to my handle_List(i) -- Obtain individual values.
-- Your code here.
display dialog ("Piece: " & var01 & " ... " & var02 & " ... " & var03 & " ... " & var04 & " ... " & var05 & " ... " & var06) -- Code sample.
else if (i begins with sString04) then
set {var01, var02, var03, var04} to my handle_List(i)
-- Your code here.
display dialog ("Chute: " & var01 & " ... " & var02 & " ... " & var03 & " ... " & var04) -- Code sample.
end if
end repeat
end repeat
on handle_List(localList) -- Extract values, from each line of data, and place into a list.
set {oAStid, AppleScript's text item delimiters} to {AppleScript's text item delimiters, ";"}
set tItems to text items 2 through -1 of localList
set AppleScript's text item delimiters to oAStid
return tItems -- Return a list of values.
end handle_List

How do I test for the presence of an active open document in Photoshop?

I’m new to Adobe scripting, and one of my first scripts deals with the activeDocument in Photoshop.
If there is no activeDocument, I want to display a message and terminate the script. My efforts
so far have been met with frustration. While developing the script in ExtendScript Toolkit,
I used the test expression "activeDocument in app", and everything worked as expected. And when I installed the script
in the Photoshop scripts folder and ran it from Photoshop with a document open, it also worked.
But when I ran the script from Photoshop with no document open, it failed.
Moreover, after that,the script failed when I tried to run it in ESTK.
I did some testing and found that my test expression, "activeDocument in app"
was returning true, even though no document was open.
Still in ESTK, I replaced the “app” with ”Application” in the test expression. That worked when
I stepped through the script. But when I tried to run it without stopping, it stopped at the
test expression, and displayed the error message, “Application is undefined.”
So how do I test for the presence of an open document in Photoshop ??

After posting this, I discovered the Photoshop Scripting Forum, and I found my answer there.—
I should have used “app.Documents.length” as my test expression.

How old is test/dev environment?

Hi,
How can I check, How old is test/dev environment which was cloned from PROD in past.
by the creation time of control file?
Thanks

Just for the pourpose of sharing knowledge, even if your regular backup strategy does not include rman, you can still issue this command. I have created a just recently cloned database out of the seed, it works too.
[oracle@cursocfe log]$ rman target /
Recovery Manager: Release 10.2.0.1.0 - Production on Tue Apr 24 14:03:49 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: DEMO (DBID=3364817245)
RMAN> list incarnation of database;
using target database control file instead of recovery catalog
List of Database Incarnations
DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
1 1 DEMO 3364817245 PARENT 1 30-JUN-05
2 2 DEMO 3364817245 CURRENT 446075 24-APR-07

How can i test my vpn connection?

so recently i decided to test if ver 1.3.0.3 of the quickvpn client would work better with the 1.3.0.5 rvs4000 firmware. i loaded quickvpn to an xp pro computer (freshly built, i might add) and got to work. in order to test the connection, i attempted to piggy back off an unsecured wireless network. this network is on the same ISP network as i am.
i use dynamic DNS, and the unsecured wireless network could resolve my IP correctly, but for some reason i couldnt connect to my home network from the unsecured network. my router is set to respond to lan requests, but i couldnt ping it. my router passes HTTP traffic to a computer in my network, but i couldnt bring up the webpage. finally, my router responds with the router config page over port 443, and i couldnt bring that up.
so i used my ISP's dialup service to test. initially, as always, i had a million problems with the vpn client. systematically, i tried to resolve the issues. i installed the patch in the readme for quickvpn. i checked log files to see where stuff was failing. eventually, i could connect to the VPN, but would get that "remote gateway is not responding" crap. i know of a (poor) workaround for this which allows you to "finalize" the connection, but that workaround doesnt allow you to ping around in your network. sometime later, after randomly messing with settings, the tunnel would connect without the workaround. i have no idea what "fixed" this.
despite all this, my 28.8Kbps connection wouldnt allow me to do anything meaningful on my network. i couldnt connect to the router or to a server of mine (http or fileshare). the only thing i could do was ping internal devices. other requests seemed to "hang" rather than timeout or do anything more concrete. basically, i gave up on testing using dialup, even though my router and the client software confirm a good connection. but i still wasnt convinced.
next, i figured i could create some type of "DMZ" on my network by placing a switch between my ISP's modem and my router. im not a cisco network professional by any means, but im pretty familiar with networking on a above-average level. that said, despite my best, i couldnt get my quickvpn computer to see my router from the "DMZ".
finally, i figured i could just test the tunnel while directly connected to my network's lan. bad idea. everything seems to go okay until it locks up on "activating policy". rebooting or otherwise ending the negotiation ends in the computer being unable to do anything anymore. when i try to ping anything, i get "negotiating ip security" ad infinitum. the only way i could fix this was by doing a system restore.
so here's the question: how can i test my quickvpn connection?why can't i just tunnel through my network? and before you scream that you can't, thegreenbow vpn client has NO PROBLEM connecting to my rvs4000 while connected to my own network.

Hi Aaron,
I am going exactly the same thing as you however, I had my cousin buy and install a RVS4000 at his house in Australia.
I access it from the USA so that I can help manage his Local Area Network, he is just not technical..
I setup a DDNS client on his RVS4000 so that I can always get to his Router via a domain name rather than a IP address.
I noticed that you didn't mention anything regarding importing client certificate into the directory of the VPN client on your PC.
I also noticed I disabled IPSec passthrough on the router in Australia, see the pictures below, not sure why, but the VPN client is working.
I also did not setup any gateway to gateway VPN tunnels, Only added a client , exported certificate as per the manual, See the last screen capture below.
You will also note if you view the screen captures that my cousins RVS4000 has not been upgraded to the new code.Is there a reason for that...not really...he's just a user, not really technical. Also note I have not added any VPN tunnels on my RVS4000.
I have a reasonably reliable connection between the USA and Australia. I didn;t have to play with any other options, just add users to the VPN client database.
Your description of the working environment of your PC is missing details on the version of XP, so i will mention the following taken from the software release notes of the RVS4000 ;
There is a known issue with Windows XP SP2 Firewall.
ICMP packets are always dropped by the firewall when the firewall is enabled.
This issue causes the QuickVPN client to be unable to establish a tunnel with the remote QuickVPN server successfully.
Microsoft has released a patch to fix this issue, which you can get from:
http://support.microsoft.com/kb/889527/en-us
After you install the patch, the issue should be resolved. You can also fix this issue by upgrading Windows XP to SP3.
You cannot plug a PC on the same network as the router for testing, they must be on dissimilar WAN networks for testing purposes.
Your remote PC VPN client will not be allocated a IP address in the RVS4000's network, hosts behind the RVS4000 will still respond to pings, as they direct the responses to their default gateway, the RVS4000.
The thegreenbow VPN client is a distracter at this point costing 50 something EURO for a license, lets try to get the quickVPN client working !
So, if you still wish try the following, firstly make sure your XP has been upgraded to SP3;
1. If you upgraded your router to the new version of code, then reset your router to factory defaults to re-initialize your router, yes start again.
2. Export the VPN client certificate to the directory that contains the VPN client. In my case it is;
"C:\Program Files\Cisco Small Business\QuickVPN Client"
3. add a VPN client account to the router
4. Use port 60443 from the quickVPN client. and try VPNing to the router.
5 hmmm, if the client still fails try disabling IPSec Passthrough on the router for grins and giggles.
If this fails, call the SBSC at the following location for resolution;
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
good luck ...regards Dave

How do I test a scenario without getting the other party involved

Hi,
How do I test a scenario without getting the other party involved?
I have created a scenario to receive information from an external system (Remedy), processing through a SoapAdapter into SAP to create a service order. How can I send a sample of information in order for me to test my scenario without asking the Remedy people to transmit data all the time?
Thanks in advance,
Leanne

hi Leanne,
have a look at my weblog:
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible
it shows how to use the test tab from RWB
to send test messages
Regards,
michal

How to get Test Utility for PI 7.3 Single Stack JAVA only.

Hi All,
We are having PI 7.31. Single Stack JAVA only.
we want to test some scenario. Can anybody tell me how can i test the scenario in PI 7.3
is there any test utility by which i can send some test messages to PI 7.3.
from where to download this utility.?
Regards,
Umesh

Hi,
The test message functionality is currently available in PI dual stack only..
Lets hope that in future releases this functionality may available in Single Stack also.
Regards,
Mastan vali

How can I test my Query As A Web Service?

Hi,guru:
    I have created my Web Service based on universe which based on SAP BW query using Query As A Web Service Designer, but when I use it in Dashboard on BOBJ platform by passing a parameter to the Web Service, it seems no response from the Server,I made 2 test steps:
    1.Pass a value to the input parameter,I checked by ST01 in BW Server and see no records of the action, and no result return.
    2.Pass a blank to the input parameter,I checked by ST01 in BW Server and got many records,and all data be retrived.
    It seems that when I passed the parameter,the Web Service seems no response and didn't run at all. Is there anybody who can tell me how can I test the Web Service,I want to test it and input my parameter.
    Thanks very much for your quick response.
Best Regards
Martin Xie

Hi Martin,
Check the following link which might be helpful:
1657208 - "No object returned; you either have not put objects in the result pane or your query is incorrect" when using QAAWS and KEYDATE variable in BI4.x
How to use Prompt in xcelsius of BIWS
Regards,
Noopur

How to create test database in system (have downloaded mxdb)

how to create test database in system (have downloaded mxdb)...Can someone pls help as I am new to SAP

Hi amit,
the maxdb documentation gives all information which is needed:
Install the software with SDBSETUP:
<a href="http://maxdb.sap.com/currentdoc/4c/da3b3c51bd4b3ae10000000a114084/frameset.htm">Installation</a>
Create a database with DBMGUI
<a href="http://maxdb.sap.com/currentdoc/84/d8d192570411d4aa82006094b92fad/frameset.htm">Create Instance</a>
Reagrds, Christiane Hienger

How can I test my discrete graphics card in an MBP Retina?

How can I test the hardware on the discrete Nvidia grpahics card in my late 2012 MBP Retina?
I've had a *lot* of problems with it which I won't repeat here but the latest fun thing it's doing is crashing and requiring a hard reset any time *anything* attempts to access the discrete graphics card. This includes but is not limited to:
*Opening system profiler and clicking on Graphics (it displays a blank screen)
*Running a 3D graphics benchmark
*Running intensive mathematical calculations on the GPU
*Connecting to an external monitor with the thunderbolt port and using the computer for a short period of
None of these things actually work and after unsuccessfully attempting any of them the computer becomes very unstable shortly there after and usually crashes and requires hard reset. One time I got a crash report that said something about GPU panic.
Any recommendations? I get the sense that the apple hardware test is not doing a thoroough test of the GPU if at all.
Thanks.

If they add OSX support for this product and it comes in at a reasonable price point, it could be an attractive solution.
http://www.anandtech.com/show/5352/msis-gus-ii-external-gpu-via-thunderbolt
Also, there are products from other companies that allow connection to PCIe cards through thunderbolt. These two are geared more towards professional use (Audio/Video I/O cards).
http://www.sonnettech.com/product/echoexpresschassis.html
http://www.magma.com/thunderbolt.asp

How do you test your new laptops?

To the gurus or people who have researched this question: How do you test your new laptops?
When you get a new laptop, what do you do to test it?
My X1Carbon might arrive in a couple weeks, and reading about all the failures and DOAs is scary. So assuming mine is not simply DOA, how do you shake out the less obvious or more obscure problems?
I did search for this info before posting. One other person asked the question,
>> Would appreciate advice re optimal set-up and what testing/diagnostics to do to determine if ther...
but no one answered.

With testing I start with the basics and work my way to the harder stuff.
Inspect the external condition of the machine.
Boot and enter the BIOS before Windows. Review settings then power off.
Boot from Acronis True Image Home backup/recovery DVD and clone HDD or SSD and thus the factory image before it's ever booted to Windows.
Boot to Windows and look carefully at the Lenovo factory image and try to get an understanding for the Lenovo software and why it is there. This does not include the other software from Microsoft, Google, etc.
Create Lenovo Factory Image DVD set with Rescue and Recovery. Throw disk set in the box or put on the shelf in case the machine is ever re-sold.
Test all of the ports - I test every port on the machine for my expected usage. For instance, in the case of the X1 Carbon I would confirm the mini DisplayPort connection works correctly with an external LCD panel. If the machine had a IEEE firewire port or something, test that. Test the USB 3.0 ports with a known working external external enclosure and verify transfer speeds.
Test the SSD speed with CrystalDiskMark, ATTO and AS Disk Benchmark software to get a good overview of the performance.
Install HWiNFO and look carefully at the components. Observe turbo boosting, thermals and fan RPM over the course of a few days for battery and AC power.
Do at least one full battery discharge and recharge. Observe the cycle and details are being properly displayed and recorded in Lenovo Power Manager.
Download all software and drivers from support.lenovo.com for the model being tested. Confirm visually you have all the core components needed. Core includes the drivers, power management driver, Power Manager, hotkeys, etc.
Flatten the machine and install Windows or Linux from scratch. Install drivers and software.
Re-test ports and confirm the machine is working properly.
Benchmark the SSD again. Confirm no change.
Install HWiNFO and confirm turbo, thermals and fan speeds are still proper.
Install core applications and test them. There may be core features in Windows that also need to be installed and tested. For instance, Windows 8 Hyper-V for virtualization.
Connect any external devices you expect to use and test them. For instance, video cameras, smartphones, mp3 players, digital cameras, printers, USB docks, etc.
Do several battery tests with your typical applications and behavior. The goal here is to simulate how the machine will be used in your day-to-day setting or travel scenarios. I usually do at least three tests. This can be rather time consuming with long battery life machines so I get a lot of other testing out of the way first.
By the time you get to this point, if you haven't hit any major roadblocks you'll start to have a good feel for the machine, and if it is going to be a keeper or not. The assumption here is that during this timeframe you have been observing the screen, keyboard, and trackpad performance to see if it's to your liking. The other assumption is that you are using the machine and applications in the scenarios you are purchasing it for.
I don't run synthetic benchmarks. I prefer to test a machine against the scenarios I expect to use it with. I spend most of the first week making this assessment. If any major hardware defects are present, the machine is automatically returned. I do not repair machines just received. No exceptions.
Week 2 is for ironing out any minor issues and assessing if the machine meets the requirements for the scenarios it will support. If it does, it is kept. If it does not, it is returned. This week includes subjective and objective input. You have to weigh the pros and cons for a machine against your priorities. It is rare that a machine is perfect so you have to decide the ROI for the machine. Service and Support must be considered so week two might include a call to support for any unresolved issues. Don't discount the service you receive during this period.
After week two, you are likely right on top of the last day to return a Lenovo machine. The return period is 21 days from the invoice date (I believe), not the day the machine is received so make sure you are well aware of it. After 21 days, the machine is yours for good unless you sell it. Decision time.
Good luck.

HT1338 How do I test cd rom

Similar Messages

Maybe you are looking for