HT1338 How do you create a group using imail

I am trying to create several different groups using the address book in imail. I tried the help section to no avail, can someone please help me.
Thanks

10.7 Lion / 10. 8 Mountain Lion
This may not answer all your question but will provide an idea.
http://www.macworld.com/article/1165582/how_to_email_groups_with_mail.html
http://www.macworld.com/article/1165582/how_to_email_groups_with_mail.html
Best.

Similar Messages

How do you create a group contact

How do you create a group contact? I set up icloud, but that only shows individual names. I do not want to update to ios 8.0.2 yet as it is very buggy. Any ways on how I could send this? (This is for the mail app, not SMS)

Hi benpete420,
Thanks for visiting Apple Support Communities.
If you would like to create a contact group, you can do so on iCloud.com or using the Contacts app on Mac OS X.
Once the group is created, it will be synced to your iPad as well.
You can find the instructions for creating groups at these links:
iCloud: Create a group and add contacts to it
Contacts (Mavericks): Group contacts
All the best,
Jeremy

How do you create new groups within Contacts on the iPad?

Can you create new groups within Contacts directly from the iPad, iPhone,or do you have to do it on the computer first?

The easiest way is to get the app called group e mail. There are a couple of others as well. There is a way to do it on your computer, and sync it, but I find that personally frustrating. :). Save yourself the aggrevation, and get the app, that works pretty well.

HT2486 How do you create a group on the iPad or iphone

I'd like to know how to create a group in contacts in Address Book on the iPad or iPhone.

I just tried this method and it works. I'm also looking into creating groups using iCloud, but haven't really read into it yet.
1) go to your Contacts App. Select "All Contacts", or whatever area you want to include your new group.
2) touch the + sign at the bottom which will add in a new contact. Yes, you're right, this is NOT a group contact, but an individual one.
3) In the "First" name field, add in the name of the group. You can ignore Last name and/or company if you want, or add in more info.
4) add your string of email names in the "email" field. I believe the default just says Home.
voila.
I recommend that you first make the string of names in another text app, such as notes first as I accidentally touched the little 'x' mark on the far right side which deleted my progress...argh. Or, if you have a lot of addressses to add, you might want to do it on your computer first, and then just email the list to yourself. I'm sure there are easier ways, but this is a quick and easy way, especially if your email group isn't large.

How can you create a user using mbean

Or if you already created a user via console,
how can you access it with mbean ?
what is the domain, and type etc?
Thanks
netatta

Thanks Wayne. I'll have to try that. Although I'm wondering, doesn't Oracle have plans to use one-way password encryption at some point? making this method of password retrieval break?
I've also found the following article. It talks about how the OIM API can get an authenticated user session from the authenticated WLS session. It's tantalizing! But doesn't really match my use case or reveal the inner mechanics of how the OIM API gets what it needs from WLS; and therefore I don't think I can subvert that mechanism to do impersonation.
http://fusionsecurity.blogspot.com/2013/01/authenticating-oim-apis-without-end.html
Another approach I'm looking at, which works if all i want to do is fire up a session for one specific user (e.g. an unprivileged service account), is to use creds (username and password) stored in the WLS Credential Store (CSF). See appendix A in:
http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/oim/oim_11g/developing_oim_custom_approval_process_for_resource_provision/developing_oim_custom_approval_process_for_resource_provision.pdf

HT1338 How do I create a group in my contacts

There is no place in my contacts nor in my email to create a group.

This might help but I have never used it
http://support.google.com/mail/bin/answer.py?hl=en&answer=138740

How do you create *.exe files using Labview6.0

I shall be grateful if anyone can give me the following info or direct me as to where i can find it..
(a) What is the procedure of creating executable files using labview6.0
(b) Do i require any other components other than the labview base package.

In addition to previous post,
a) after buying Application Builder (which is included only in LV6i Professional Package), you'll notice a new entry in LV Tools menu (Build Application or Shared Library[DLL]). This opens App Builder (a panel where you can setup many parameters for the VI/LLB to 'build'). It's not complicated and you can use default values for the first try (after selecting your VI)
b) here is the link to start with App Builder [http://sine.ni.com/apps/we/nioc.vp?lang=US&pc=mn&cid=2448]

How do you create a client using static libraries?

We are trying to create a client that does not use shared libraries.
We have tried to use a -Bstatic option when linking the libraries but,
we get the error /usr/local/tuxedo/lib/libtux.a(libtux.so.60): fatal
error: input shared object in static mode
We have tried several variations like moving the .a files, changing
the options around and got no where.
Any suggestions would be greatly appriciated.
Thank you.

Hello,
If you are using JSF, you can create a LOV by using the selectItem
component.
Look at this sample code:
<h:form binding="#{backing_test.form1}" id="form1">
<h:selectOneMenu binding="#{backing_test.selectOneMenu1}"
id="selectOneMenu1">
<f:selectItem itemLabel="option1" itemValue="1"
binding="#{backing_test.selectItem1}" id="selectItem1"/>
<f:selectItem itemLabel="option2" itemValue="2"
binding="#{backing_test.selectItem2}" id="selectItem2"/>
<f:selectItem itemLabel="option3" itemValue="3"
binding="#{backing_test.selectItem3}" id="selectItem3"/>
</h:selectOneMenu>
</h:form>
Regards,
Luis R.

How do I create a group of e-mail contacts for my iPhone, iPad

How do you create contact groups for e-mail for iPhone 3GS AND IPAD 2 ?

GContacts is for both the iPhone and iPad. It can be found in the US App Store. Don't know what country you're in so I can't say for sure you can find it in your App Store. If you do a search on "contacts" in your App Store you should be able to find some contact manager apps.
There is a way to create a contact with a group of email addresses.
1. In Notes app create a list of email addresses separated by a comma. Example [email protected],[email protected] Highlight the list and copy.
2. In Contacts create a new contact and give it the name of the group you want.
3. In the email field paste the list of email addresses.
Note: you are probably wondering why you have to copy and paste the addresses into the email field. If you try to type the list into the email field, you will find that there is no way to type a comma in this field.
4. Save the contact.
5. When you create an email, select the group entry from contacts.
You may get a message that the email address is invalid, but ignore the error, because the email should still be sent to all addresses.

How much RAM do tab groups use (on average)? Do I need to watch out for how many groups I create?

I may have gone overboard in the creation of Tab Groups. I say this because now my system is beginning to act a bit sluggish. I created 7 groups, two of which have 9 or 10 tabs. Should I pull back on the number of groups I create (as well as how many tab are located within each group). That is: How much RAM do tab groups use. How can I calibrate or understand the trade off between these markers and the amount of RAM they use?

You can see the memory usage on the about:memory page.
You can open about: pages via the location bar like you open a website.

How can I create a group email I can save and use again

How can I created a group email to save and use again. I have an iPhone 4s. ISO 8.2

Olga, this is not a default feature in iPhone. You need a 3rd party application. I have created a free one, Easy Group, for group texting and group emailing.
http://itunes.apple.com/fr/app/easy-group/id461469079?mt=8
Rémi
Note: I may receive some form of compensation, financial or otherwise,from my recommendation or link.

HT4191 iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad? If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account.

iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad? If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account. I've seen reference to the "My iPhone" local storage put no mention on how you create this folder or access this folder within the Notes app. I realize storing information in a local storage like this provides no syncing between other iDevices but that is exactly what I'm looking for. I'm running iOS7.0.4 on a iPhone 5S, and a iPad Air. Any help would be greatly appreciated.

If you go to Settings > Notes > Default Account you will see "On My iPhone" as the default account and the only choice if you have not enabled syncing Notes in Settings >iCloud or Settings > Mail, Contacts, Calendars. If you have enabled syncing you can still select "On My iPhone" as the default account. When you are in the Notes app you won't see any accounts listed if you have not enabled syncing because they are all in the On My iPhone account and that is the only place possible. It is not a folder that you create.

Re: How do you create and use "common" type classes?

Hi,
You have 2 potential solutions in your case :
1- Sub-class TextNullable class of Framework and add your methods in the
sub-class.
This is the way Domain class work. Only Nullable classes are sub-classable.
This is usefull for Data Dictionary.
The code will be located in any partition that uses or references the supplier
plan.
2- Put your add on code on a specific class and instanciate it in your user
classes (client or server).
You could also use interface for a better conception if needed. The code will
also be in any partition that uses or references the supplier plan where your
add on class is located.
If you don't want that code to be on each partition, you could use libraries :
configure as library the utility plan where is your add-on class.
You can find an example of the second case (using a QuickSort class,
GenericArray add-on) with the "QuickSort & List" sample on my personal site
http://perso.club-internet.fr/dnguyen/
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
http://perso.club-internet.fr/dnguyen/
Robinson, Richard a écrit:
I'm relatively new to forte and I'd like to know how can you handle utility
type classes that you want to use through out your application? Ideally
what I want is a static class with static methods.
Let's say that I have a StringUtil class that has a bunch of methods for
manipulating strings.
My problem is that we have code that runs on the client and code that runs
on the server. Both areas could use the StringUtil class, but from what I
understand, I have to create StringUtil in a plan and then create a server
object of type StringUtil. The server object will eventually get assigned
to a partition. That's not good since I really want the server object to
physically reside at the server end and at the client end. (Actually, I
don't want a server object, I just want to invoke a static method of a
static class).
Any clues on how to solve this problem would be appreciated.
Also, what is the url at Sage-it that has a summary of all emails that have
been posted to [email protected]? Perhaps this question has been
answered previously.
Thanks in advance
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi Richard,
Your question about "utility classes" brings up a number of issues, all of
which are important to long-term success with Forte.
There is no such thing as a static method (method that is associated with a
class but without an implicit object reference - this/self/me "pointer") in
TOOL, nor is there such thing as a global method (method not associated
with a class at all). This is in contrast to C++, which has both, and
Java, which has static methods, but not global classes. Frequently, Forte
developers will write code like this:
result, num : double;
// get initial value for num....
tmpDoubleData : DoubleData = new;
tmpDoubleData.DoubleValue = num;
result = tmpDoubleData.Sqrt().DoubleValue;
tmpDoubleData = NIL; // send a hint to the garbage collector
in places where a C++ programmer would write:
double result, num;
// get initial value for num....
result = Math::Sqrt(num);
or a Java programmer would write:
double result, num;
// get initial value for num....
result = Math.sqrt(num);
The result of this is that you end up allocating an extra object now and
then. In practice, this is not a big deal memory-wise. If you have a
server that is getting a lot of hits, or if you are doing some intense
processing, then you could pre-allocate and reuse the data object. Note
that optimization has its own issues, so you should start by allocating
only when you need the object.
If you are looking for a StringUtil class, then you will want to use an
instance of TextData or TextNullable. If you are looking to add methods,
you could subclass from TextNullable, and add methods. Note that you will
still have to instantiate an object and call methods on that object.
The next issue you raise is where the object resides. As long as you do
not have an anchored object, you will always have a copy of an object on a
partition. If you do not pass the object in a call to another partition,
the object never leaves. If you pass the object to another partition, then
the other partition will have its own copy of the object. This means that
the client and the server will have their own copies, which is the effect
you are looking for.
Some developers new to Forte will try to get around the lack of global
methods in TOOL by creating a user-visible service object and then calling
methods on it. If you have a general utility, like string handling, this
is a bad idea, since a service object can reside only on a single
partition.
Summary:
* You may find everything you want in TextData.
* Unless you anchor the object, the instance will reside where you
intuitively expect it.
* To patch over the lack of static methods in TOOL, simply allocate an
instance when required.
Feel free to email me if you have more questions on this.
At the bottom of each message that goes through the mailing list server,
the address for the list archive is printed:
http://pinehurst.sageit.com/listarchive/.
Good Luck,
CSB
-----Original Message-----
From: Robinson, Richard
Sent: Tuesday, March 02, 1999 5:44 PM
To: '[email protected]'
Subject: How do you create and use "common" type classes?
I'm relatively new to forte and I'd like to know how can you handle utility
type classes that you want to use through out your application? Ideally
what I want is a static class with static methods.
Let's say that I have a StringUtil class that has a bunch of methods for
manipulating strings.
My problem is that we have code that runs on the client and code that runs
on the server. Both areas could use the StringUtil class, but from what I
understand, I have to create StringUtil in a plan and then create a server
object of type StringUtil. The server object will eventually get assigned
to a partition. That's not good since I really want the server object to
physically reside at the server end and at the client end. (Actually, I
don't want a server object, I just want to invoke a static method of a
static class).
Any clues on how to solve this problem would be appreciated.
Also, what is the url at Sage-it that has a summary of all emails that have
been posted to [email protected]? Perhaps this question has been
answered previously.
Thanks in advance

How do you create a save as default folder for MP3 files used Captivate text to audio voices files?

How do you create a save as default folder for MP3 files used Captivate text to audio voices files?

Hi Ed
Thank you for contacting me, however I already know how to save text to
audio files via timeline using the Export feature.
So my question was not entirely clear and I apologize for that. To explain
further, whenever I save a text to audio file, captivate takes me to a
default save as folder where I then have browse back to my production
folder where I am keeping all my Txt to Aud files. This is very tedious
process when you have alot of files to save. So my question was is there a
way to configure captivate so I can make my production folder the default
file for whenever I save a Txt to Audio file through Export feature that
the system automatically takes me to that production folder, and I am
spared the long tedious process of saving the file manually to the
prodcution folder I want.
I have copy the pathway to the production folder in the URL filed in the
Save As dialoge box and that workaround as cut the work down but I still
have to paste that URL field to point the file to the right folder. So it
would be nice if I could do everything automatically. Microsoft makes this
capability in their MS Office applications, so I was thinking Adobe might
do the same thing. Your help with this would be appreicated,
Thanks
Merrill Roberts
Sr. Training Specialist
SunGard Availability Services
Direct 925-831-7730
Mobile:415-215-9280

How do you create and save icc profiles using photoshop?

How do you create and save icc profiles using photoshop?

You don't. Color profiles require specific measurement hardware and software.
Mylenium

HT1338 How do you create a group using imail

Similar Messages

Maybe you are looking for