HT1338 I am looking to publish a web site I created in iWeb to another hosting provider. I have never published this site to MobileMe nor do I have a MobileMe account

I am looking to publish a web site I created in iWeb to another hosting provider. I have never published this site to MobileMe nor do I have a MobileMe account. Can someone please help me?

Hi Larry, no experience with iWeb, (which is ending soon), but what kind of files & folders does it make locally?
You need a Wb Hosting service & an ftp client, if you need more info reply with that & what kind of files/folders it made.

Similar Messages

I have never had this prompt before - " Unable to prepare your project for publishing - the project could not be prepared for publishing because of an error occurred (-108)

I have never had this problem before using iMovie
Unable to prepare project for publishing.
The project could not be prepared for publishing because an error occurred (-108)

When I got the error, I realized it had nothing to do with RAM, I believe it was the camera footage I was using because changed the settings on my camcorder to something iMovie didn't like. So I have changed it back and its fine now.

I downloaded FF 4 and now 5 and with neither my screen looks nothing like it shows on the FF page. For instance, I do not have the orange FF tab in the upper left corner, I have no option of "pin as app" nor do I have Panorama. Can someone please help me?

I downloaded FF 4 and now 5 and with neither my screen looks nothing like it shows on the FF page. For instance, I do not have the orange FF tab in the upper left corner, I have no option of "pin as app" nor do I have Panorama. Can someone please help me?

To get the orange FF tab, go to View > Toolbars > Menu Bar. This should uncheck the menu bar and give you the orange button.
Panorama is a box made of 4 grey rectangles that should be on the far right, if it isn't after you enable the orange FF tab, right click on anywhere on a tool bar that doesn't have anything on it, and you should get a menu with a list of your tool bars that you can check and uncheck. go down to customize at the very bottom and it will open a window with all your buttons. Find the panorama/tab groups button and drag it onto the tool bar of your choice.
to pin a tab as an app, right click on it; it's an option in the right-click menu.

Is it possible to upload web pages created in IWEB to another type of site?

I have tried to read through a lot of the posts on here, and always seem to get lost after a few. I am trying to post a website that I am creating using IWEB to the internet. THe catch is that my .Mac account has expired, so I wanted to find another way to get them online. I am a high school teacher and trying to make a website for my classes. If anyone has any other ideas or information please let me know. I greatly appreciate all your time.

Click here for options, or if your ISP allows it, place the published files in the folder /Library/WebServer/Documents/ of your hard disk and start web sharing from the Sharing pane of System Preferences.
(28609)

Trying to save a png for web, and trnsparency is not working, i have never had this problem before

I am trying to save for web, a png with a transparent background, and even though I clicked the transparency check box, it is still producing an image with a white background, when exporting the png the transparency works fine, so I know it has nothing to do with the layers. Help!

b,
I believe it is time for the list. Hopefully, it is one of the easy ones at the top; 5) is probably irrelevant for this case.
The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media, see below. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html
External media: It is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky (for a while), but the chances of file corruption and other unpleasantnesses are immensely greater when you use anything but the harddisk, and it is better to be safe than sorry.
In addition to the (far greater) risk of file corruption, some issues are mentioned here:
http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

I trying to publish a web page from iweb, but it doesn't recognize my MobileMe account

I trying to publish a web page from iweb, but it doesn't recognize my MobileMe accouI trying to publish a web page from iweb, but it doesn't recognize my MobileMe account, what can I do?

MobileMe has been discontinued for over 2 years now. You'll need to find a new hosting server for your website.
This may be of help to you: Life After MobileMe.

Report published as web service with parameters

Post Author: kevinzebeste
CA Forum: Publishing
hi,I have a problem in a report published as web service.indeed, the report has a parameter, a date.Client side I do this://I create the parameter ParameterFields paramFields = new ParameterFields(); ParameterField paramField = new ParameterField(); ParameterDiscreteValue paramDiscreteValue = new ParameterDiscreteValue(); paramField.Name = "date"; paramDiscreteValue.Value = "10/10/2006"; paramField.CurrentValues.Add(paramDiscreteValue); paramFields.Add(paramField);//I add the parameter into the crVievwer crystalReportViewer.ParameterFieldInfo = paramFields;//I call the web service to get data crystalReportViewer.ReportSource = "http://localhost/WebService/Rapport1Service.asmx"; Server Side :Now, I want to get back the parameter in the web service (in Rapport1Service.asmx, so server-side) to be able to call my storedprocedure with the good parameter, this one which was put on the client side (10/10/2006).I tried to do crystalReportViewer.ReportSource = "http://localhost/WebService/Rapport1Service.asmx?date=22/10/2006" on the client side but no way. i don't find a solution, is there any way to make this possible ?Moreover, i have one database for each user, so i need to pass the user name, password and account too..

Post Author: kevinzebeste
CA Forum: Publishing
I have found a solution.
I create a web service in which i return a dataset, filled with the data wanted.the web service take as parameter: the report name we want, the parameter(s), and the username and password (to check if the user has right to access to data.)After that, I fill the report, client side, with the datasen given. i don't know if it's the best solution but it works !

Ws-basic username inside pl/sql procedure published as web service

I'm new to jdeveloper, but been working with Oracle for 13 years...
We have used Jdevelper to expose a pl/sql procedure as a web service using the "Publish as web service..." wizard. We then used Web Services Manager in server agent mode to protect that web service using ws-basic header auth. OWSM does a lookup on the user supplied credentials against our active directory ldap server to determine if the user should be able to call the service. That all works, EXCEPT...
The problem is that the stored procedure runs a query against data protected by virtual private database and extensive audit logs. We need access to the ws-basic credential from within oracle so that we can set the session context and pull the end-user's id for auditing purposes.
Right now, all we know inside the stored procedure is the oracle username used to connect to the database. This is of course different from the one used to authenticate our user in the OWSM layer.
The pl/sql procedure does not have a parameter to specify the user name, and even if it did, there is no way for us to verify that any user supplied parameter matches the credentials used in OWSM.
So, I assume, I need to modify the code generated by the "Publish as web service" wizard and somehow pull the ws-basic credentials (just username) and push them into the Oracle session_context.
Anyone have any sample code or advice on how to get access to ws-basic credentials or even any of the metadata on a certificate supplied to OWSM for authentication/authorization?

I change p_action value ( before p_action => 'alta' ) now ( p_action => '"alta"' )
res := Xxm_Web_Service_Client_Pkg.invoke(p_init_msg_list => FND_API.G_TRUE,
p_url => 'http://198.137.253.178:7777/event/DefaultSystem/clienteService_RS',
p_action => '"alta"',
x_return_status => l_return_Status,
x_msg_count => l_msg_count,
x_msg_data => l_msg_data,
x_req => req)
And the invokation an ESB service from a PLSQL procedure began to work fine !!!
Thanks for all answers
Thans Peter !!!
Claudio

I need someone to look at this site

I am working on a site for my parents radio show. (no i am
not keeping the ugly buttons on the left, they are only there for
now while i figure out what i am doing ;))
i have a movie clip towards the bottom of the stage that
contains two lines of text about when the show airs and about it
also streaming on the web.
the problem is not all this text is always visible in the web
browser. i am publishing my html page at 100% but sometimes only
one line is showing but if you adjust the browser size you can then
see the secong line. i have never had this happen before and thnk
it defeats the purpose of publishing at 100%
can someone please look at it and let me know why it might be
doing this.
the URL is
http://www.camplovewave.com
any help is greatly appreciated.
ps: i tried moving the movie clip higher up on the stage but
still no luck.

i actually checked again and I had it on dynamic text,
whoops. was getting late. switched it to static and all is good.
thanks
d~

I have recently had to fire my web designer who was using iWeb. Now I'm trying to figure out how to get the site to open in iWeb on my new MacBook Pro. Is there a way?

I have recently had to fire my web designer who was using iWeb. Now I'm trying to figure out how to get the site to open in iWeb on my new MacBook Pro. Is there a way?

Firstly iWeb CAN'T IMPORT any kind of published html code as it has no import facility. You can however add html code, javascript and css by selecting the html snippet and placing it on your page the entering the code in here and clicking on Apply. You DO NOT create a shape as you say - you use the html snippet and place your code in there.
There are not really a lot of ways in which you can write code - if you want to enter small amounts of code, then you would use an ordinary text editor to do this such as Text Edit on a Mac or Text Wrangler. If you want to add code to iWeb like this, then you would either use the html snippet method in iWeb itself or you would have to publish the site to a local folder from iWeb and open the relevant html page with a text editor and add the additional code in this way and then publish. However, if he decided to add the code with a text editor, then you would have to upload the pages directly to the server using an ftp client - if you try to upload the site directly from iWeb, all the extra code will be overwritten.
As for checking whether the site was created using iWeb, all you need do is view the site in Safari and then click on View and then select View Source Code and it will tell you.
Even thoough extra code was added to the site and he might well have done this by publishing to a local folder and adding the code with a text editor, he should still have the domain file for the site too.
Ask again. I'm sure that for adding quick code, most would not want to use programmes such as Dreamweaver, but a simple text editor will suffice. As OT already said, if he claims that he does not have the domain.sites file, then try Flux 4 which is a web design programme and has full import facilities. At least this way, if he just gives you the published version of the site, you have some way of opening it.
You can download a free trial of Flux 4 and you can also purchase the full version from the Mac App Store if you decide you like it.

Website created with iWeb looks different in IE and Firefox than Safari-why

So I spent a few hours working on my Home and About Us page. Then, while browsing this forum, I started seeing posts about how sites done with iWeb might not look good in IE and/or Firefox. I decided to test out my work. I zipped up my site files and emailed them to myself. I went to my Dell desktop and downloaded the files to that computer. I opened up the home page in Firefox first. The site seemed to look ok, and both the home and about us page links showed up and were functional (i.e. I was able to browse back and forth between the two pages). However, I had some bullet points on the about us page that had a green border around them. This rendered fine in Safari on my Mac, but in Firefox, the bottom line of the box was not connected! Why?
After viewing in IE, I was depressed. The site didn't look at all like it should have. Not only that, but I couldn't navigate between the pages, since the links for home and about us were not at the top. What can I do to make sure that a site I create with iWeb looks good in Safari, IE, and Mozilla Firefox?
-A stumped newbie

Well I see that you and I share the same problem, I posted the same type of question and am anxiosly awaiting replies on this topic, as it is very important
I own a small business, and every hour a customer cannot view my site is a customer lost to incompatibility issues.
I hope someone can help answer these issues.
http://www.siegfriedscall.com

New download won't open links, nor will it go to web addresses typed into address bar. Never had this problem with previous version.

I just upgraded to the newest version of Firefox. In this new version it sometimes won't open a link even in a search engine such ask Yahoo. It also won't ever go to an address I type into the web address bar. I have never ever had this problem with a web browser so I know it's not me. I've never had this problem with Firefox before either. Please fix this bug.
Thanks.

'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

I was referred to this site because Internet Explorer would not allow me to navigate to web page. Therefore the tech-support staff sugested I try your site to get to the web page

upon logging into this program open road x3 from the site realeflow.com. I get a msg "navigation to web page has been canceled" so I contacted the tech-support staff. They informed me that in the past this problem has occurred with internet explorer, so they referred your site to me, as a option to get into the web page from their site. I have never used your site to get into a web page before. So I do not exactly know how this works??????????

In Firefox 3.6.4 and later the default connection settings have been changed to "Use the system proxy settings".
See "Firefox connection settings" in [[Server not found]]
You can find the connection setting here: Tools > Options > Advanced : Network : Connection
If you do not need to use a proxy to connect to internet then select No Proxy
Another possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that,.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls

Does anyone know whether it is possible to add a Pay Pal button to web site created using IWeb?

Does anyone know whether it is possible to add a Pay Pal button to a community web site I created using IWeb?
If so how does hide the Pay Pal code?
Robert Jones

See this page for info ...
http://www.iwebformusicians.com/Internet-Music-Sell-Distribute/PayPal.html
Other pages in this section show how to set up a sales page and create a shopping cart.
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

IWeb looks different in program than published on web

I understand that some of the Fonts I use to create in iWeb won't necessarily translate the same to all computers....but why is the spacing getting messed up as well? This happens most frequently when I use textboxes or pictures in frames, set them to 'Floating,' and arrange them how I want them to look on the page....but then when the site publishes they look totally different online than they do in my iWeb.
How can I at least keep them consistent?? Help!!

Welcome to the Apple Discussions. For maximum font compatibility across different computers you should use Web Safe Fonts. Otherwise if a computer doesn't have that font it will substitute one which may not fit the layout.
An alternative is to apply a drop shadow to the text box and set its opacity to zero. That will convert it to an image file which will display the same on all computers. If you have iWeb's preferences set to indicate text boxes that have been converted this is what you'll see in iWeb:
Click to view full size
However, it will add "weight" to the page causing it to load slower in browsers. That should be avoided if at all possible.
OT

HT1338 I am looking to publish a web site I created in iWeb to another hosting provider. I have never published this site to MobileMe nor do I have a MobileMe account

Similar Messages

Maybe you are looking for