HT1338 I am unable to get documents to go to connect and sync to my iphone

I am unable to get documents to go to connect and sync to my iphone

- If the photos were taken by or saved to the iPod just use the computer's camera/image capture software to get them from the iPod.
- If the photos were synced to the iPod you need a third-party program such as PhoneView of TouchCopy.

Similar Messages

  • HT1338 Help with needing to be able to set up icloud and sync itunes with iphone 4s

    Can and do I need to download OS X Mountain lion to support me to be able to use Icloud for my mac and iphone 4s and to sync other stuff up to it? I currently am running on a Mac OS X 10.6.7 wtih 4GB and it says I need 10.6.8 to to icloud and sync my itunes to my phone.  What do you suggest? Is it possible to put OS X Mountain lion on my computer with its current state?

    As your Mac should run Snow Leopard provided it has at least 1GB memory, that would be a good deal easier and very much cheaper than trying to find a 10.5 install disc.
    Snow Leopard costs $30 approx from the online Apple store (£26 if you're in UK)
    You'll need to update Tiger to 10.4.11 with the combo installer first (unless you're just erasing the disc and starting fresh) You can then update SL from 10.6.3 to 10.6.8 with its combo installer.
    For comparison, 10.5 Leopard is currently running about $130 from Apple (if still available) and more on Amazon etc.
    This info for Leopard courtesy of TexasMacMan;
    Mac OS X 10.5 Leopard installation system requirements
    http://support.apple.com/kb/TA24950
    Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
    If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
    MB427Z/A  Leopard 10.5.1 install DVD
    MB576Z/A  Leopard 10.5.4 install DVD
    MB021Z/A  Leopard 10.5.6 install DVD (single user)
    MB022Z/A  Leopard 10.5.6 install DVD (5-user family pack)
    Installing Mac OS X 10.5 Leopard
    http://support.apple.com/kb/HT1544
    Mac OS X 10.5 Leopard Installation and Setup Guide
    http://manuals.info.apple.com/en/leopard_install-setup.pdf
    After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update

  • I am unable to get a two way calendar or contact sync

    I am unable to get a two way calendar or contact sync with my iPhone and my mac.  iTunes does not sync either way. I use an iphone 3,  I think. I do not use iCloud.
    Mac OS 10.6.8, itunes up to date, iphone running 4.2.1
    Any help would be appreciated.

    For resetting the sync history on a Mac running Lion - 10.7.x if needed.
    http://support.apple.com/kb/TS1627
    If you see the Sync menu in the menu bar, skip to step 3: 
    If you do not see the Sync menu in your menu bar, skip to step 7.
    Hold the Option key on your keyboard, then click the Sync menu in the menu bar:   
    if you see the Sync menu but you are unable to open it, skip to step 8.
    Choose Reset Sync Services.
    Click Reset Sync History.
    Test for the original issue. If the issue persists, or if you are unable to open the Sync menu, follow these steps:
    In the Finder, choose Utilities from the Go menu.
    Open Terminal.
    In the Terminal window, type or paste the following command on a single line:
    /System/Library/Frameworks/SyncServices.framework/Versions/A/Resources/resetsync .pl full
    Press Return.
    Quit Terminal after the operation has completed (when Terminal returns to the command prompt with a $).

  • XL Reporter error"'Report initialize:unable to get document"

    Does excel 2010 compatible on XL Reporter? If yes, can some give me idea on how work on it?
    coz we install office 2010,I already enabled the macros and check the 'trust access to the vba project oblect model on the trust center of excel. When we tried to run the XL Reporter it gives error Ilike this
    "An error occured during the process:'Report Initialize: Error unable to get document. Cause:Automation error.XL Reporter start up failed.'".
    We're using SBO 2007 A SP01 PL13.
    Can some one help me to solve this?

    Hi Gordon, as for now I'm still trying to fix it with the solutions they gave on the other thread but still result to same error.
    To Manvendra, I got the error when trying to run a report. I can open XL Reporter but unable to generate any report
    Edited by: vissia on Jul 6, 2011 1:51 PM

  • Error Message: Unable to get document: HTTP-1

    We run tools 8.44 and Enterprise Portal 8.8. There are some paglets created on the Portal as well including a payadvice pagelet for the users to look up their pay information. Pay information comes from the HCM DB. What we notice from time to time is that when logging in to the Portal, the pay advice pagelet will not display and gives "Error getting Content".
    I check the app and web logs and they come back with "Failed to load URL: http://server1.domain.ca/psc/environment/EMPLOYEE/EMPL/s/WEBLIB_EO_PE_LN.ISCRIPT2.FieldFormula.IScript_EPP_NAV_PAGELET in the Portal registry. In fn CPortalRegistry::FindLogicalURL in file e:\pt84406b-retail\peopletools\..\peopletools\SRC\psoftapi\portalregistry.cpp
    Weblogic reports Error Message: Unable to get document: HTTP-1
    However if you hit page refresh (F5) inside the browser the pagelet will load fine.
    Appreciate insight. This issue is contained to dev environments only.

    We run tools 8.44 and Enterprise Portal 8.8. There are some paglets created on the Portal as well including a payadvice pagelet for the users to look up their pay information. Pay information comes from the HCM DB. What we notice from time to time is that when logging in to the Portal, the pay advice pagelet will not display and gives "Error getting Content".
    I check the app and web logs and they come back with "Failed to load URL: http://server1.domain.ca/psc/environment/EMPLOYEE/EMPL/s/WEBLIB_EO_PE_LN.ISCRIPT2.FieldFormula.IScript_EPP_NAV_PAGELET in the Portal registry. In fn CPortalRegistry::FindLogicalURL in file e:\pt84406b-retail\peopletools\..\peopletools\SRC\psoftapi\portalregistry.cpp
    Weblogic reports Error Message: Unable to get document: HTTP-1
    However if you hit page refresh (F5) inside the browser the pagelet will load fine.
    Appreciate insight. This issue is contained to dev environments only.

  • HT4759 I am unable to get my photos backed up to the cloud off my iphone 4

    I am unable to get my photos backed up to the cloud off my iphone 4s

    Are you trying to back up the photos to icloud or restore a backup to the iphone?
    "off my iphone" - this is where I'm confused.  Are you trying to get the photos off the iphone (because perhaps you are running low on space)?  If so, you should sync the photos to your computer, then you can delete them from the phone.
    See:
    http://support.apple.com/kb/HT4083

  • When synching the iPhone i get the following message: iTunes could not sync contacts to iPhone because the sync server failed to sync the phone. any idea how to correct this

    Header 1
    Header 2
    when synching iPhone i get the following message: iTunes could not sync contacts to iPhone because the sync server failed to sync the phone. any idea how to fix this problem?

    Did you try the solutions mentioned in this article? iTunes for Windows: "Unable to load data class information from sync services" alert

  • HT1725 trying to connect and getting host down check your connection and try again??

    trying to connect and getting host down check your connection and try again??

    GymnastGirl152 wrote:
    Whenever I try to text ...
    Remember, your iPad is not a cellular telephone.  It cannot do texting in the way a cellular telephone can - using SMS over a cellular network.  All it can do is iMessage - meaning it would use WiFi to communicate to another Apple device.

  • I keep trying to sign in and get error to check network connection and again

    I keep trying to sign in to face time on my mac pro and always get error to check network connection and again. I am using wi-fi, and I know my internet connection is good because I can access the web

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • HT204053 when trying to sync my iPhone i get a message saying : iTunes can't sync apps to iPhone because the apps installed on the phone could not be determine. what is going on?

    when trying to sync my iPhone i get a message saying : iTunes can't sync apps to iPhone because the apps installed on the phone could not be determine. what is going on?

    I received the same error message after I had recently updated iTunes to 10.5.1 and I had wirelessly updated 13 apps.  I had to go into iTunes and select Apps, on the bottom right it said I needed to update 13 apps.  I updated the apps via iTunes and then synced again without an issue.
    iPhone 4S / OSX 10.6.8 / iTunes 10.5.1

  • Anyone else have a problem printing from an iMac OS-X 10.9.3 to a wireless Epson Artisan printer? Sometimes it prints but must often I get "The printer is not connected" and I have to retry printing 8, 10 or 12 times before it will print?

    Anyone else have a problem printing from an iMac OS-X 10.9.3 to a wireless Epson 835 Artisan printer? Sometimes it prints but must often I get "The printer is not connected" and I have to retry printing 8, 10 or 12 times before it will print? I have followed all the instructions from Epson about upgrading, etc. but it is very frustrating when I have to repeatedly try to print. Epson says talk to Apple???

    Try checking thru these, maybe some help.
    Mac OS X: How to reset the printing system
    http://www.macworld.com/article/2029528/mac-troubleshooting-what-to-do-when-you- cant-print.html
    Also try deleting the printer from your printer Q system preferences, then reinstalling it (highlight the printer click the minus symbol, then click the plus symbol and add it again. Reboot, and try.

  • What is the most effective way to get my imac 2 ghz intel core duo 2 10.4.11 to be able to run 10.5 and sync with my iphone 4s?

    What is the most effective way to get my imac 2 ghz intel core duo 2 10.4.11 to be able to run 10.5 and sync with my iphone 4s?

    As your Mac should run Snow Leopard provided it has at least 1GB memory, that would be a good deal easier and very much cheaper than trying to find a 10.5 install disc.
    Snow Leopard costs $30 approx from the online Apple store (£26 if you're in UK)
    You'll need to update Tiger to 10.4.11 with the combo installer first (unless you're just erasing the disc and starting fresh) You can then update SL from 10.6.3 to 10.6.8 with its combo installer.
    For comparison, 10.5 Leopard is currently running about $130 from Apple (if still available) and more on Amazon etc.
    This info for Leopard courtesy of TexasMacMan;
    Mac OS X 10.5 Leopard installation system requirements
    http://support.apple.com/kb/TA24950
    Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
    If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
    MB427Z/A  Leopard 10.5.1 install DVD
    MB576Z/A  Leopard 10.5.4 install DVD
    MB021Z/A  Leopard 10.5.6 install DVD (single user)
    MB022Z/A  Leopard 10.5.6 install DVD (5-user family pack)
    Installing Mac OS X 10.5 Leopard
    http://support.apple.com/kb/HT1544
    Mac OS X 10.5 Leopard Installation and Setup Guide
    http://manuals.info.apple.com/en/leopard_install-setup.pdf
    After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update

  • HT1338 i am unable to get my serial number right after updating my logic pro

    i am unable to get my serial number  for pro logic right after updating the software

    If you bought the boxed set of Logic Studio 2.0  which includes LP9, then you cannot  download it. You must use the disks that came as part of the boxed set... to install from.
    If you bought the App Store version of Logic Pro 9 then go to the Mac App Store App,  Sign into the Store using the same Apple ID you used to purchase LP originally, look under the Purchase Tab and you shouldl find LP9 ready and waiting for you to download and install.

  • I had to replace the hardrive on my laptop. I have over 2000 photos in an album on my iPod Touch but I am unable to get the pictures off the iPod and back onto my computer. Suggestions?

    I am in need of assistance with syncing photos on my iPod onto my laptop. Had to replace the hardrive on the laptop and I'm unable to get the photos synced from the iPod.     

    - If the photos were taken by or saved to the iPod just use the computer's camera/image capture software to get them from the iPod.
    - If the photos were synced to the iPod you need a third-party program such as PhoneView of TouchCopy.

  • HT204380 When someone called using FaceTime,I was unable to get to the IPad in time.and I missed the call. When I went to use the IPad it was locked up.unable to get further than the FaceTime screem.

    When someone called me on my IPod I was unable to get to the pad in time to recieve the call.When I went to use the machine it was locked up on the FaceTime screen. And it remaines locked no matter what I do

    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Or if that doesn't work, quit FaceTime completely and restart the iPad.
    Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Maybe you are looking for

  • Shipment costs to appear as delivery costs in Purchase

    Hi, we want the shipment costs to appear on the purchase order. I have followed the sequence as below Created a purchase order Created a delivery VL31N Created a shipment VT01N Created a shipment cost document VI01 I have goods receipt using VL32N, b

  • CSS 11501 Load Balancing with X-forwarded-for

    Hi, We have a pair of CSS 11501, Currently it is using source ip for load balancing and 5 servers as backend , however we have users loggin in using http and based on its source IP (ISP PROXY) , it is forwarded to SERVER A. However, we have a SSL pag

  • Error 7 during assemble test Vis for runtime distribution

    I get this error when assembling VIs for Runtime Dist. Probably can't find a file but which Vi is the problem? I tried to open diagram for TestStand - Call Package VIs for Distribution.vi to find the problem vi but it is password protected. Attachmen

  • Install hangs at 11%

    When trying to instal Designer install hangs at 11% while trying to instal pl/sql things. I am trying to install the suite on win xp pro machine. Does anybody knows the solution? Primoz Please excuse me if this is not the right forum.

  • Create Swatch Library

    Is there a program available that allows me to create a swatch library within illustrator based on my printing profile? I am looking to build a library of the solid coated pantone library to my printing profile and load it into illustrator.