HT1338 I cannot do any software update can someone explain me how to fix this ?

I have a macbook pro with Mac OS x 10.6.8 and cannot do any software update can anyone help me ?

Yes.  The description for Pages in the Mac App Store says 10.7.4 or later.  Mountain Lion is 10.8. 
First, check this page (about Mountain Lion)
http://www.apple.com/osx/specs/
where it says Supported Models, to make sure your MacBook Pro model can run Mountain Lion.  If it can, get Mountain Lion instead of Lion.  It's $20, and there is no requirement to first install Lion before installing Mountain Lion.
Before running the Mountain Lion Installer, it would be a good idea to run Disk Utility.  Select "Macintosh HD" in the sidebar and go to the First Aid tab.  Use Repair Disk Permission and then Verify Disk.  Don't be concerned about message that come up with Repair Disk Permission, but if any error is reported byVerify Disk, you need to fix that problem BEFORE installing a system upgrade.  Running these checks will help avoid problems, if there are any issues on your startup disk prior to running the upgrade.
If your Mac has been running without restarting for a while, you should restart, THEN immediately run the Mountain Lion Installer.

Similar Messages

  • PLEASE HELP!!!! Java 7 Update - Can someone help me how to fix this?

    I'm trying to help my colleagues who are using Apple computers and we have a site that needs to be accessed. However, when they have upgraded Java to version 7, they are being prompted whenever they try to launch the site. Below is the message they get:
    ERSInstaller failed. ensureDirectory error.
    ensureDirectory error. Directory(/Users/JohnSmith1/IBMERS/G2.0 Expense Reporting/ can not be created
    Thanks so helping!

    Talk to your email provider. The error message is from them.

  • Can someone tell me how to fix this error in 10.4.11 on a G5 Quad Core 2.5GHz Tower...A valid video device could not be found for playback. [-70017]

    Can someone tell me how to fix this error in 10.4.11 on a G5 Quad Core 2.5GHz Tower...A valid video device could not be found for playback. [-70017]

    That's an error reported from DVD Player I believe...
    kDVDErrorMissingGraphicsDevice = -70017, // A valid graphics device is not available.
    There's some conjecture it has to do with HDCP, or Video Card problems, but the only 2 cures/fixes I found were Software related, one was cured by updating the OS, another by replacing the Video kexts.
    I think this error also shows up if trying to use DVD player in Safe Mode, (too much research isn't good! ).
    At the Apple Icon at top left>About this Mac.
    Then click on More Info>Hardware>Graphics/Displays and report like this...
    NVIDIA GeForce 7800GT:
      Chipset Model:          GeForce 7800GT
      Type:          Display
      Bus:          PCI
      Slot:          SLOT-1
      VRAM (Total):          256 MB
      Vendor:          nVIDIA (0x10de)
      Device ID:          0x0092
      Revision ID:          0x00a1
      ROM Revision:          2152.2
      Displays:
    VGA Display:
      Resolution:          1920 x 1080 @ 60 Hz
      Depth:          32-bit Color
      Core Image:          Supported
      Main Display:          Yes
      Mirror:          Off
      Online:          Yes
      Quartz Extreme:          Supported
    Display:
      Status:          No display connected
    Can't think of much to try at the moment, but perhaps reapplying the big 10.4.11 combo, Repair Permissions, & reboot would help, not sure.
    The combo update for PowerPC-based Macs...
    http://www.apple.com/support/downloads/macosx10411comboupdateppc.html

  • HT4623 Help! After doing the IOS 7.1.1 update my iPad 4 just shows a iTunes icon and a cable with an arrow. It won't turn on. Can someone tell me how to fix this?

    After doing the IOS 7.1.1 update on my iPad 4 the screen just shows the iTunes icon and a cable with an arrow. I can't get the device to open. Can someone help me with this issue? Thanks!!

    Yes. The phone will be back to default settings.
    Once the phone is up and running you can try and restore your backup again.
    http://support.apple.com/kb/ht1414

  • My email address got into hundreds of solicitors.  I now have 703 emails from all sorts of businesses.  Apple will not help since I am not signed up with their $79 support I cannot afford more bills.  Can someone tell me how to stop this, not unsubscribe

    How do I delete and stop all of the unwanted 702 emails that are coming into my acct on my iPad. Sure there are more coming now.
    Frontier will not help unless I agree to a costly protection.  Apple says I have to have their extra contract or pay for a one-time fee.
    I cannot use my acct on my iPad this way.

    Not something I would suspect Apple could help with. The most obvious solution is to,change your email address. You might also check with your email provider and see if there an any anti-spam settings on the server that would help.

  • Update to os x version 10.9.3 now I'm not able to save photos in Jpeg. Can someone tell me how to fix this?

    I'm having trouble saving photo's in Jpeg format with adobe CS6 since apple update os x version 10.9.3.  Can anyone help me with this?

    Yes.  It happens when I crop the pictures.  Does the file size have anything to do with it?? What do I if there is layers?  I'm very new. 

  • This message was not delivered for the following reason: 553 Sender is on user denylist (Mode: normal) To address: Can someone tell me how to fix this please?

    I can receive emails from this person, but I cannot send without getting a return to sender reply with this message? Appreciate your help.

    Talk to your email provider. The error message is from them.

  • My Close, Minimize, and Maximize buttons disappear at random, have to restart firefox to get them back. Can someone tell me how to fix this?

    Don't really think I can clarify any better, my Minimize, Maximize, and Close buttons disappear at random leaving a little blank spot. Can't figure out why.
    [http://tinypic.com/r/351698o/5 Missing Buttons]
    [http://tinypic.com/r/20zv2nm/5 Extentions]
    [http://tinypic.com/r/21debyd/5 Plugins]

    Try to disable transparency in Windows, see:
    *[[/questions/804050]]
    #Right click in a free space on your desktop.
    #Left click on Personalization.
    #There are four options at the bottom of the screen, choose "Window Color and Appearance".
    #Select a border color
    #Uncheck: "Enable transparency"
    * http://www.tech-recipes.com/rx/966/vista_enable_or_disable_aero_glass_transparency_effect/

  • I tried syncing a video from my MBA to my iPad and then my ipad says 1 item could not be imported and the 1 item that was imported was my video. Can someone tell me how to fix this problem?

    The video was shot on a sony cybershot DSC-H70

    Hi, jjsylves.
    Thank you for visiting Apple Support Communities. 
    If the media is still located on your computer, I would create a version specifically for the iPad.  To create and iPad version in iTunes 11 select the media that you are wanting to convert.  From there, select the File menu > Create New Version > Create iPad or Apple TV version.  Once the media has been converted, sync the iPad version to the iPad. 
    iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
    http://support.apple.com/kb/TS1497
    iTunes 11 for Windows: Syncing overview
    http://support.apple.com/kb/PH12311
    Regards,
    Jason H. 

  • Can someone tell me how to fix no service on iPhone 4s software 5.1

    Can someone tell me how to fix this please ? i have tried everything!!

    No service with your carrier?

  • I cannot do any software updates without downloading "Mac OS X 10.5", but I cant find it anywhere!!

    My computer won't find any software updates, can't even do it manually.
    Every time I go to download something from apple it says I can't without "Mac OS X 10.5". but I cannot find this update anywhere!
    HELP!!

    You need to understand the difference between an Update and an Upgrade.
    An Update is a free change within an existing Operating System. Such as the .11 added to 10.4.
    An Upgrade is a complete new Operating System that must be purchased. Such as 10.5 Leopard to 10.6 Snow Leopard.
    You can upgrade from 10.4 to 10.6 with no problems. Any program that runs under 10.4 should run under10.6. See this list for compatibility with 10.6: http://snowleopard.wikidot.com/  You might have to upgrade some drivers for printers, etc.... And you will have to install Rosetta if you have any Power PC applications http://www.macobserver.com/tmo/article/snow_leopard_installing_rosetta/ 
    I recently upgraded an older MacBook (model 1,1) straight from 10.4 to 10.6.
    A retail 10.5 Leopard disk will run you over $200
    Mac OS 10.6 Snow Leopard came out in July of 2009 and became obsolete in July of 2011 when 10.7 Lion was introduced. Unlike earlier Operating Systems which were removed from the Apple Store when a new OS came out Apple kept Snow Leopard around for a year until 10.8 Mountain Lion came out. When Mountain Lion came out they removed Snow Leopard and Lion from the online store.
    The Early 2006 model 1,1 Core Duo can only run a maximum of 10.6 Snow Leopard. The models Late 2006 Core 2 Duos 2,1 through Early 2008 4,1 can only run a maximum of 10.7 Lion. The Late 2008 model 5,1 Aluminum Unibody through the Mid 2010 White Unibody model 7,1 can run 10.8 Mountain Lion.
    The Snow Leopard 10.6 DVD should still be available from Apple for $20. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775 to purchase it. It may still be in the Legacy Products list.
    If they no longer have any in stock you will have to buy it from eBay or Apple resellers that still have stock. But you will have to pay a premium since the DVDs are no longer being made. Snow Leopard DVDs are already up to $100 on Amazon.
    http://www.ebay.com/sch/i.html?_nkw=10.6+snow+leopard&_sacat=0&_odkw=mac+os+10.6 &_osacat=0

  • Hi, my Ipod Schuffle (4 gen) dissapears from windows vista right after I execute Itunes, I've change the drive letter, erase temps in App data file, verified USB drivers, etc... Can someone guide on how to solve this?

    Hi, my Ipod Schuffle (4 gen) dissapears from windows vista right after I execute Itunes, I've change the drive letter, erase temps in App data file, verified USB drivers, etc... Can someone guide on how to solve this?

    If you want the shuffle to be always visible in Windows (outside of iTunes), you need to Enable disk use.
    Select the shuffle in the iTunes sidebar, under DEVICES.  Over to the right, select the Summary tab.  You should see a checkbox that says Enable disk use.  Check it and click Apply.
    NOTE:  If disk use is enabled, you have to Eject the shuffle in iTunes, BEFORE you physically disconnect it.  If disk use is NOT enabled, you can disconnect the shuffle at any time, as long as iTunes is not doing something with it at that moment (such as syncing); the shuffle's light will then be blinking (to indicate DO NOT DISCONNECT).
    So, unless you want to use the shuffle like a USB flash drive (carry random files on it), you may want to NOT Enable disk use.

  • HT1459 My iPod touch screen just turned a white-ish green color and I can't turn it on or off. I can't connect it to iTunes, and the back is too scratched up to see the serial number so I have no way of getting it. Can someone tell me how to fix it?

    My iPod touch screen just turned a white-ish green color and I can't turn it on or off. I can't connect it to iTunes, and the back is too scratched up to see the serial number so I have no way of getting it. Can someone tell me how to fix it? Please tell me quickly! I was right in the middle of something!

    Did you try a reset?
    iPod touch User Guide (For iOS 5.1 Software)

  • When spanning new tabs (firefox) my users are asked to re-authenticate with pages already signed into. Can you tell me how to fix this issue for firefox users?

    With some research I found regedit setting called “TabProcGrowth” that allows tabs to span without re-authenticating with certain browsers. Can you tell me how to fix this issue for my Mozilla Firefox users? Our current version of Mozilla Firefox is: 24.5.0 (x86 en-US). This was first noticed with a product called Confluence that we use in our Tech Support area. Users are having to reenter their password every time they click on a new link in confluence. Any help would be appreciated.
    Thank you,

    Hi Bernie:
    As long as you are accessing your internal server on http:// or https:// then I would expect the normal rules to apply. To see whether some external requests are being blocked, you might try using Firefox's Web Console, Network tab.
    You can open the console in the lower part of a tab using either:
    * Ctrl+Shift+k
    * "3-bar" menu button > Developer > Web Console
    * (menu bar) Tools menu > Web Developer > Web Console
    Click "Network" on the top bar of the Web Console.
    Then use the address bar or a bookmark to launch Confluence in the same tab. Each request made by Firefox should be displayed along with the result. You can click a row for more details.
    When I look up "TabProcGrowth" it seems related to the Protected Mode feature of IE8 and newer, which is not (yet) applicable to Firefox. http://blogs.msdn.com/b/askie/archive/2009/03/09/opening-a-new-tab-may-launch-a-new-process-with-internet-explorer-8-0.aspx
    However, if Confluence is heavily reliant on plugins such as Flash or Java, that could be a factor because plugins are run out-of-process in Firefox. In that case I suggest checking with Confluence for suggestions.

  • Slide to unlock doesn't work happend more than 8 time every time i had to restart my phone, Please can you tell me how to fix this bug . iPhone 5, iOS 7.0.4

    Slide to unlock doesn't work happend more than 8 time every time i had to restart my phone, Please can you tell me how to fix this bug .
    iPhone 5, iOS 7.0.4

    Backup and restore your software via iTunes. If the problem continues, restore as a NEW device. If this solves it, that means there is some corruption in your backup file. If the problem is still there, you should take it to the Genius Bar at an Apple Store for evaluation.

Maybe you are looking for

  • How can I make iCal wrap text in month view?

    Lion iCal only dispays one line of text for each entry in month view.  How do I set it to display two lines, or to wrap the text so the full entry can be viewed? On Snow Lepoard it displayed two lines of the same calendar.

  • Small Business Server 2011 Standard DNS change for Offcie 365

    I currently have a SBS 2011 system setup and recently upgraded the company to Office 365. The issues stemming from this is that users although receive email fine, are not able to access public folders or the sharepoint list in the outlook client. The

  • F110 debug - exit FEDI0003

    My apologies in advance, as this topic has been posted before. I do realize that there are quite a few threads on this already on the forum, however most, if not all previous postings, don't list a definitive answer aside from 'Thanks, solved problem

  • Transport management in a 2-Tier Solution Manager system

    We're planning to create a SMG Dev system in a separate server than our SMG prod system (2-tier landscape). Is the Transport system configurations the same as in the R/3 system? Thanks in advance.

  • Pixel dimensions for stills in FPCX?

    For use in a FCPX HD project, at what ppi do you recommend scanning? Then do you recommend taking it into photoshop? At what pixel dimensions do you recommend saving it -- and in what format -- jpeg or tiff? Thank you!