HT1338 I got problem with my mac bookOS X Lion 10.7.5 web safari can't loading , same with my ,app store. can some give me solusion.
I got problem with my connect wit server using app store, safari and update software. Keep loading and failed can't connect to server. please gime me solusion. I can use only using firefox and chrome
Power off the router. Wait awhile. Power it back on. Wait until all the lights are lit up properly.
It will take a while.
Restart the computer.
Start up in Safe Mode
http://support.apple.com/kb/PH11212
Deselect Proxies if selected.
Safari > Preferences > Advanced > Proxies:
Click "Change Settings" button.
The network preferences window for Proxies will will show up with "Proxies"
tab selected.
Under "Select Protocol", uncheck any box if selected.
Click "OK", then "Apply"
Similar Messages
-
Any help to the above question would be much appreciated.
Mac app store isn't the exclusive way to download apps in a mac, like it is the case in iPhone or iPod Touch. So if you can't find something in the app store, just google it and download from any trusted source you find.
-
Recently upgraded Mac 24" to Lion (clean install) and now no external hard disks work with Time Machine.
installed new internal disk first with fresh 10.7.3 Lion software. Also upgrade ram to 4GB. Work great, super fast.
BUT.... my WD 1TB firewire400 external disks no longer work with the Lion enabled machine now.
FURTHER... I read somewhere that WD is problematic with Lion but Seagate was not... so I went and bought a new 3TB Seagate GoFlex.
When it didnt work properly either, I patiently searched and found a software/firward upgrade and applied.
I re-partitioned disk to extened/journaled standard, etc.
Then assigned the particition to Time Machine. Drive turned the blue/grey color, so I thought it would work.
But, it has now been in "preparing" mode in Time Machine for HOURS....
What is up Apple? So dissappointed. Ive read these type of problems are notorious with Lion and I wish I never upgraded.
Are you trying to make issues with External disks, to drive people to iCloud? That trick ont work in me. I will not reward bad behaviour Apple.
Please provide a fix... I wasted hours/days screwing around with this, instead of using the Mac for what its intended!Solved by Pondini, on another thread I opened...
Answer:
Sounds like either:
A directory problem on your internal HD. Verify your internal HD, and Repair any other volumes being backed-up per #A5 in Time Machine - Troubleshooting.
Something in OSX may be damaged. You've tried the "combo," so a fresh copy of OSX (that won't disturb anything else) would be worth a try (and you don't need a tech for that). See Installing the ''combo'' update and/or Reinstalling OSX. -
I added apps by syncing with a Mac. It was under my husband's ACCT. When I tried to update apps on my iPad, it was his account. How do I change this? It only happens when I try to update apps
Apps will always be tied to the account from which they were purchased.
If they were purchased from your husbands account, then they will have to update using that account. -
i have two computers. my laptop has os 10.6.8. my mac mini has 10.5.8, hence no app store. can i buy lion on my laptop and then burn a dvd of it and install it on my mac mini or does it have to be installed on the same computer it is bought with?
You can do it. This article from Macworld will be helpful to you:
http://www.macworld.com/article/161087/2011/07/install_lion_over_leopard.html
I recommend the "brute-force" method.
Just make sure you have your data backed up properly! -
is it possible to buy an apple monitor for a mac book pro version 10.7.5 with Software Mac OS X Lion 10.7.5
Look at the Apple menu's, "About This Mac," and then press "More Info" button, to identify your Mac model beyond just, "MacBook Pro."
example:
LED Cinema Display:
System Requirements
Mac OS X v10.6.4 or later
Mac computer with Mini DisplayPort, including MacBook, MacBook Air, MacBook Pro, Mac Pro, Mac mini, and iMac
http://store.apple.com/us/product/MC007LL/A/apple-led-cinema-display-27-flat-pan el?fnode=53 -
How do i get the driver to use an HP laserjet 5mp with my Mac that runs Lion?
how do i get the driver to use an HP laserjet 5mp with my Mac that runs Lion? I'm told by HP to get it through Apple updates but it doesn't show up.
The term "server", while technically correct, is misleading. A print server takes the low-level protocol spoken by a printer and serves it over a higher-level protocol. For example, parallel printer port (a.k.a. Centronics or IEEE 1284) and serve it over USB. Or parallel or USB and serve it over Ethernet with a variety of printing protocols (lpr/lpd protocol, JetDirect protocol, port 9100 protocol, the names are confusing).
In reality, a print server looks nothing like what we usually associate with "server" (which is typically a biggish computer). Instead they usually look like adapter plugs or even adapter cables, or like a little network hub (just with printer connectors instead of network connectors).
Here are a few examples (I'll use Amazon as a guide book, without implying that I endorse them). Let's start with USB to parallel; it seems they tend to look like adapter cables. Here is one that takes a USB plug (male) and creates a female port that you can plug your regular old printer cable in: http://www.amazon.com/Cables-To-Go-16899-IEEE-1284/dp/B000UX21PY/ref=sr_1_1?ie=U TF8&qid=1333640548&sr=8-1
And here is one that goes from a USB plug directly into the printer: http://www.amazon.com/Parallel-Printer-Adapter-Connect-parallel/dp/B000BV8604/re f=sr_1_4?ie=UTF8&qid=1333640548&sr=8-4 replacing the old printer cable.
Then there are (really cheap) Ethernet to printer adapters. Here is one that you put into the printer (warning, the plastic cover will probably not fit afterwards): http://www.amazon.com/TP-Link-AC-TL-PS110P-Single-Parall/dp/B003CFATR4/ref=sr_1_ 11?s=electronics&ie=UTF8&qid=1333640755&sr=1-11 By the way, I really don't like this type, I always find them unreliable. But they are cheap.
The ones I like look more like a network hub. Here is the NetGear PS110: http://www.amazon.com/NETGEAR-PS110-parallel-Ethernet-100Base-TX/dp/B0002AF9JU/r ef=sr_1_2?ie=UTF8&qid=1333640860&sr=8-2
And the HP external JetDirect: http://h10010.www1.hp.com/wwpc/us/en/sm/WF05a/18972-18972-236253-34214-64302-273 16.html?dnr=1&jumpid=reg_r1002_usenc-001&lang=en&cc=us (I think this is the best one of the lot). Both of those you put next to the printer, use your existing parallel printer cable, and connect them to the network. Don't get scared by the astronomical price of the HP; it's commonly available used.
There are even some wireless models around. In theory, you might be able to use a parallel-to-USB adapter cable and then plug the USB cable into your trusty Apple Airport (as a good Apple fanboy or fangirl you've bought an Airport, right?), but I don't know whether that will work. With the HP JetDirect box I'm quite certain that it will work (but it's old-fashioned, doesn't come in white, doesn't do wireless, and is not the slightest bit hip or cool). -
My ipod touch 4G got problem after update to iOS 6, it can not access the Apps store ,can not access safari,map, weather and so on, could someone help me to solve the problem, thanks in advance~~~
Force close the App Store app and reset the iPad. No data will be lost when you reset the device.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
I have recently upgraded my mac and ipad to IOS7 and find that Safari will not load onto my iPad. It just shuts down the app. Any ideas? I have been onto Mac who took me through a very long iPad robot, but the problem is still the same! Help appreciated
Do you mean that you did a soft-reset ?
Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data and also Clear History
If that doesn't fix it then try closing Safari via the iPad's multitaskingbar and see if it works when you re-open it :double-click the home button to open the taskbar and then swipe or drag the Safari app's 'screen' up and off the top of the screen to close it, and click the home button to close the taskbar.
After trying the above you could also do a soft-reset (even if this is what you've already done it might be worth trying after clearing Safari's cache and closing the app via the taskbar) : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
Every time I try to use apple ID for face time I got an error message "the username or password was incorrect" although they are right and I use them in App Store and I cloud even after resetting my password, the problem happens also with iMessage . Please help
For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa -
Since I've updated my iPad to iOS 6 it's running a lot slower especially when I scroll up and down and takes ages to load up on the App Store I know they got glitches but are they gonna be sorting this out as well ?
Hi!
I am also having issues with the device since updating to IOs 6. The time between clicking an icon, i.e. a picture, and the load of that picture takes longer enough to notice it. It did not happen before the update.
I am also having problems with some applications, specially the Facebook application. When I click on my picture in the right bar of the app, it promps a window that ask me for share my location, etc.. and get freeze there.
Regarding reseting the device, already done. It did not helped.
Also, SIRI is very nice, but sometimes it stop working and I have to re-start the device in order to being able to use SIRI again. When it happens, it looks like SIRI is sending the information, but does not do anything after.
It is understandable that they require some time to get the new IOs version working properly, but I dont like to be a Beta tester. -
If I buy Lion from apps store can I install it on all the Macs I own?
If I buy Lion from apps store can I install it on all the Macs I own?
Yes. Each one needs to have Snow Leopard 10.6.8 installed in order to re-download from the App Store unless you make your own USB flash drive installer:
Make Your Own Lion Installer
1. After downloading Lion you must first save the Install Mac OS X Lion application. After Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing Lion.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to several hours depending upon the drive size.
3. Locate the saved Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the InstallESD.dmg disc image to the flash drive as follows:
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the InstallESD.dmg disc image file into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable Lion installer that you can use without having to re-download Lion. -
If I buy Lion in the app store, can I ''reset'' my whole macbook (instead of doing this with the cd that comes with the macbook)?
With ''reset'' I mean, repair because it is from 2007 and so slow. So that all the data and programmes are gone and I can start over with Lion!?You have a choice. You can start by erasing the drive and reinstalling Snow Leopard prior to purchasing and downloading the Lion installer. Or you can purchase and download the installer, save the Lion installer, create a bootable Lion USB flash drive installer, boot from the Lion installer, erase the hard drive, and install Lion. I would suggest the second choice:
Make Your Own Lion Installer
1. After downloading Lion you must first save the Install Mac OS X Lion application. After Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button or quit the installer. You must do this because the installer deletes itself automatically when it finishes installing Lion.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to several hours depending upon the drive size.
3. Locate the saved Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the InstallESD.dmg disc image to the flash drive as follows:
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the InstallESD.dmg disc image file into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable Lion installer that you can use without having to re-download Lion.
To install Lion from scratch:
Install or Reinstall Lion from Scratch
If possible backup your files to an external drive or second internal drive.
Boot From Lion USB Flash Drive:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the USB flash drive then click on the arrow button below the icon.
Erase the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Install button. -
i changed my sim on my iPhone n reconfigured iMessage, it configured with my number but when i sign in with my apple id it says username/password is wrong while in all other things like FaceTime, App Store it worked with the same id and password..
can anyone help me to solve this issuei just opened my ipad, started my apple account/I.D. and realized I put the wrong e mail. I was having trouble correcting my I.D on the Ipad so I went to my laptop and make the proper changes/slash e mail address I wanted for my apple ID. I got back to my ipad and try to download an app I can't because I have to sign in my apple account and I can't because it still has the irrelivant I.D/email address..
So, i did what you said.. went to setting>app store> tapped on my e mail.. it asked me to sign in (with my invalid emails address showing). I signed in with the password I had created. It said "incorrect".. I went to reset password. I reset password, tried to sign in and it says again "unvalid password".. this is getting irritating. I have been asking and no one knows what to do. -
App Store won't open, error message "App Store can not be opened because of a problem". I haven't been able to update anything for a week or so. I have used Disk Utility, Drive Genius, deleting the .plist, all to no avail. My Mac Mail hasn't worked since the upgrade to Mavericks. Mavericks can't see my LaCie Cloudbox. Can any of these be solved by me?
I have the same error "XXXX App cannot be opened because of a problem". And I also cannot open iTunes and get the error "This copy of iTunes is corrupted or is not installed correctly. Please reinstall iTunes."
Only Apple apps seem to be at issue here...
Repairing Permissions did not fix this.
I noticed this after the last Software update. Is there no fix other than re-installing?
Not happy that an Apple software update killed all my apps...
Maybe you are looking for
-
WET54G v3.1 Will not accept the default password for web setup
The setup: 1 2WIRE wireless router for AT&T DSL connection 1 wireless laptop, online and good to go 1 desktop, too far from router to connect with an ethernet cable, this computer does not have wi-fi 1 new WET54G v3.1, trying to setup as a wireless-e
-
HR Employe Photo Upload in a SmartForm
Hello to everybody !! We are running a 4.7 version and we need to set the employee picture into a Employee SmartForm . The pictures have been loaded with the Archive Link, and we are able to see them through transactions PA 20/30. Does any of you kno
-
Need help in choosing the best laptop
I want the best laptop for running Windows Server/Client, Linux/Unix and VMWARE.
-
Crystal Reports version 10.0.0.53327 supported on Windows Server 2003 R2?
Hello, We are currently using Crystal Reports version 10.0.0.53327 with a ASP web application on Windows 2000 Server. We are in the process of upgrading the web server to Windows Server 2003 R2 but have encountered problems with the print feature in
-
I can't get TextWrangler to work as a comparison tool - what am I doing wrong?
I've followed your help advice for 'Compare local and remote files for differences' and I can't get it to work. I have an iMac running OSX 10.7.2. I have Dreamweaver 5 and TextWrangler (3.5.3) installed in my Applications folder. In Dreamweaver, sele