HT1338 I have an imac with Mac OS X version 10.5.8. I have bought a Sony video camera which requires 10.6 or later. How do I upgrade?

I have an imac with OS  x version 10.5.8
How do I upgrade?

I don't know.
What Mac do you have?
How much RAM does it have?
How much free disk space does it have?
Allan

Similar Messages

  • Hi Guys! I have an Imac with Mac OS X version 10.5.8 and bought a wireless keyboard. Unfortunately I can´t use the volume buttons on the keyboard. I have checked almost everything, does anyone have any good idea?

    Hi Guys! I have an Imac with Mac OS X version 10.5.8 and bought a wireless keyboard. Unfortunately I can´t use the volume buttons on the keyboard. I have checked almost everything, does anyone have any good idea?

    Hello, try kguy's solution here...
    https://discussions.apple.com/thread/2332457?start=0&tstart=0
    First, Go to System Preferences, keyboard, and click on the Keyboard tab
    Make sure that the checkbox by "Use all F1, F2, etc, keys as standard function keys" is NOT checked.
    Next, click on the Show All button, and select Bluetooth. You should see your Apple Wireless Keyboard listed on the left side of the screen.
    Click once to select it, and then click the gear icon at the bottom of the box, and choose Disconnect.
    Power off the keyboard by holding down the power button on the keyboard for a few seconds until it show "keyboard Off on your imac screen, then turn it back on again.
    The device should appear once again in your bluetooth list.
    Try out the volume control buttons now, and see if that cleared things up

  • I have an iMac with Mac OS X, version 10.6.8. Should I update the software?

    I have an iMac with Mac OS X, version 10.6.8. Should I update the software?

    You posted in the iPad forum, just in case you don't realize that. If you are asking if you should update in reference to using an iPad with the iMac, Snow Leopard 10.6.8 is the minimum system requirement in order to sync an iPad with a Mac now.
    If the question was in reference to updating software in general, you might want to ask here.
    https://discussions.apple.com/community/desktop_computers/imac_intel

  • HT2404 How do I go about downloading a video off youtube using an iMAC with Mac OS X Version 10.6.8

    I have an iMac, with MAC OS X Version 10.6.8 as the operating system. I would like to download a video off youtube. How do I go about doing this?

    the clicktoflash safari extension can provide an html5 alternative link for many youtube videos, which can then be right(ctrl) clicked & 'download linked file...' chosen

  • TA48312 I have a iMac running: Mac OS X Version 10.4.11. I have had this since it was new. Can I update it to the latest OS?

    I have a iMac running: Mac OS X Version 10.4.11. I have had this since it was new. Can I update it to the latest OS? The computer is very slow now and I want to speed it up.

    Hi GLNavigator,
    Check your system to see if they meet the requirements for these OSes:
    System requirements for OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/ht4949
    Cheers!
    - Ari

  • I've a ten year-old iMac, with Mac OS X version 10.5.8

    I've a ten year-old iMac, with Mac OS X version 10.5.8 & PowerPC G5 processor
    Problem is iTunes, reinstalled recently as 10.6.3; saying needs QuickTime 7.5.5 or higher.

    the iTunes 10.6.3 was installed a few days ago by the same tech person selling me the computer about two years ago, when the OS was reinstalled including iTunes.  I've not been able to make iTunes work since the computer was returned. 
    The tech person is busy and will get back to me eventually, so I'm trying to see if I can do anything by myself.  This shouldn't of happened, though everyone makes mistakes; is what I'm guessing?

  • HT2986 I got a Samsung video camera for Christmass.  I get error message when trying to down load video.  Pictures down load fine.  I have a Imac with system 10.5.8 and Imovie 8 (7.1.4).  Is it camera problem or something on my end.  Any help is appreciat

    Got a new video camera for Christmas, Samsung HMX-F80, it down loads pictures just fine, but videos I just can't get it to down load.  I was able to down load to my PC part no problem.
    MY Imac, System 10.5.8, Imovie 8  (7.1.4).   Do I need to upgrade?  Or what.
    Any help is appreciated.

    Is it listed here?
    iMovie 8 Camcorders supported:
    http://support.apple.com/kb/HT1014

  • Have an iMac with its' orig OSX version 10.5.8   Would like to use iCloud, but need the proper steps to upgrade

    I am ready to purchase Snow Leopard but see that I have a version of my OSx that won't let me... so to get there, what do I need to upgrade to first, second and then finally to Snow Leopard?
    Many thanks.

    There is no free upgrade to Snow Leopard, you have to buy it. In the US, call the Apple online store at 800-MY-APPLE, and buy Snow Leopard off the legacy products list. Make sure that your system meets these specs for Snow Leopard.
    When you get it, insert DVD in drive, and proceed. 10.5.8 Leopard comes just before 10.6 Snow Leopard, so there are not any interim operating system updates required. After you install the Snow Leopard DVD, run Software Update until there are no updates left. Of course, you should have a system backup before doing the upgrade.

  • How do I stop Safari from "closing unexpectedly" on my iMac with Mac OS X Version 10.6.8?

    Hi, my safari just started to close unexpectedly on my iMac. If anyone can help solve this problem that would be great. Thanks.

    Hey UKR95S,
    Unsupported third-party add-ons may sometimes cause Safari to unexpectedly quit, so I'd read through this article and see if that might be the case:
    Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
    http://support.apple.com/kb/ts3230
    All the best,
    David

  • I am using Mac OS X, version 10.6.8.  Have 2 GB of memory.  Understand there is a later version.  How to update?

    I am using a MacBook, with Mac OS X, version 10.6.68.  Have 2 GB of memory.  I understand there later updates to Mac OS X, how can I update?

    First we need to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info When System Profiler comes up check the Model Identifier and post it back here.
    The Early 2006 model 1,1 Core Duo can only run a maximum of 10.6 Snow Leopard.
    The models Late 2006 Core 2 Duos 2,1 through Early 2008 4,1 can only run a maximum of 10.7 Lion.
    The Late 2008 model 5,1 Aluminum Unibody through the Mid 2010 White Unibody model 7,1 can run 10.8 Mountain Lion.
    You can upgrade direct from 10.6.8 to 10.8 Mountain Lion without going through 10.7 Lion as long as you have the Late 2008 model 5,1 Aluminum Unibody through the Mid 2010 White Unibody model 7,1.
    Mountain Lion is in the App Store for $19.99
    Lion is still available from Apple. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775. to purchase it. Then within 3 days you will get an email with a code which you can use to download Lion from the App Store.  The price is $19.99.
    You must have at least a Late 2006 model 2,1 MacBook. Lion will require at least 2gb of RAM but really needs 4gb to run smoothly.
    As for third party programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
    Also Lion and Mountain Lion don't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion and Mountain Lion.
    Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

  • HT1338 I have an iMac with version 10.5.8 Mac OS X, can i upgrade to the latest Mountain Lion S X from the Apple web page.

    I have an iMac with version 10.5.8 Mac OS X, can i upgrade to the latest Mountain Lion S X from the Apple web page.
    When I tried, it said I had to have 10.6 or later............how do I get there?

    No. You need to phone the online Apple Store and order Mac OS X 10.6 on DVD.
    (71007)

  • I have an imac with snow leopard. I do not have enough memory to get lion. I switched my  mail  to icloud and now my ipod touch has icloud.  i can receive mail on my ipod touch and through the icloud web site, BUt I cannot receive mail on my mac directly

    I have an imac with snow leopard. I do not have enough memory to get lion.
    I switched my mail  to icloud and now my ipod touch has icloud.
    i can receive mail on my ipod touch and through the icloud web site, BUt I cannot receive mail on my mac directly any more. There is an exclamation point on my mail in box and also an ! on .mac.
    Can anyone help me with settings so I can receive mail again directly on my mac?
    Thanks
    Mathmarv
    <Edited by Host>

    See this Apple note on troubleshooting icloud mail: http://support.apple.com/kb/TS4002
    You may have seen this page already: http://www.apple.com/support/icloud/mail-notes/

  • I have to upload video from my hewlett packard t200 camcorder to my mac. but mac won't recognize the camcorder files. i even bought flip4mac by tele stream which so far is useless. please help me use my camcorder with my iMac os mountain lion 10.8.2

    i have to upload video from my hewlett packard t200 camcorder to my mac. but mac won't recognize the camcorder files. i even bought flip4mac by tele stream which so far is useless. please help me use my camcorder with my iMac os mountain lion 10.8.2
    i tried to get the installation disc for the camcorder but mac wont' recognize it becaue it is windows based i guess.
    i just bought the camcorder a few months ago and when my computer crashed thought i'm finally getting a mac...it's been a costly venture which has resulted in more frustration than before my pc.
    now the things i want to use with my mac that i thought would be even simpler...are not even useable...
    help

    That camera shoots H.264 in an .avi wrapper.
    You will have to transfer the files via the Finder.
    Get a free copy of MPEG Streamclip and convert them to QuickTime .mov using the H.264 codec if you are presumably editing in iMovie.
    Note that your list of video codecs won't look like mine as I have Final Cut Pro, but H.264 is definitely an option for you.

  • I have an iMac with 10.9.1 and an iPhone 5 also updated to the newest system and I cannot get a sync set up between Ical and the iPhone or Outlook 2011 mac calendar with the iphone

    I have an iMac with 10.9.1 and an iPhone 5 also updated to the newest system and I cannot get a sync set up between Ical and the iPhone or Outlook 2011 mac calendar with the iphone. I would perfer using outlook but will settle for the Imac calendar

    It depends on what iMac you have. If it is an old PPC (G4 orG5) iMac then no further upgrades are possible. If it an Intel iMac:
    Start by checking if you can run Snow Leopard:
    Requirements for OS X 10.6 'Snow Leopard'
    http://support.apple.com/kb/SP575
    (NB: PowerPC applications can still be run in Snow Leopard using Rosetta, but they will not work in later versions of OS X.)
    The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    and in the UK:
    http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
    When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
    http://support.apple.com/kb/DL1399
    Check via Software Update whether any further updates are required, particularly to iTunes.
    You should now see the App Store icon in iTunes, and you now need to set up your account:
    http://support.apple.com/kb/HT4479
    You can now upgrade to Mavericks OS 10.9 for free IF you have one of the following Macs, with not less than 2GB of RAM, and at least 8GB of available space on your hard drive:
    iMac (Mid-2007 or later)
    MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
    MacBook Pro (13-inch, Mid-2009 or later), (15-inch, Mid/Late 2007 or later), (17-inch, Late 2007 or later)
    MacBook Air (Late 2008 or later)
    Mac Mini (Early 2009 or later)
    Mac Pro (Early 2008 or later)
    Xserve (Early 2009)
    iCloud system requirements:
    http://support.apple.com/kb/ht4759
    If you cannot run Mavericks you can purchase the code to use to download Lion from the App Store (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard):
    http://store.apple.com/us/product/D6106Z/A/os-x-lion
    or Mountain Lion:
    http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion

  • HT1338 I have an iMAC with OS X 10.4.11. HOw can I update the OS?

    I have an iMAC with OS X 10.4.11. How can I upgrade the OS?

    OK. You can upgrade all the way to Mountain Lion if you wish. But you will need to upgrade RAM once you get to Snow Leopard - 10.6.x and above. Here's the requirements:
    Snow Leopard General requirements
    Mac computer with an Intel processor
    1GB of memory
    5GB of available disk space
    DVD drive for installation
    Some features require a compatible Internet service provider; fees may apply.
    Some features require Apple’s MobileMe service; fees and terms apply.
    Lion System Requirements
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space
    Some features require an Apple ID; terms apply.
    Apple - OS X Mountain Lion - Read the technical specifications.
    Macs that can be upgraded to OS X Mountain Lion
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    Xserve (Early 2009)
    Are my applications compatible?
    See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
    You can upgrade your RAM:
    Maximum Memory
    6.0 GB (Actual) 4.0 GB (Apple)
    Memory Slots
    2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMMs
    I would recommend upgrading to the maximum your computer supports.

Maybe you are looking for

  • How to display the rows number of times by giving the column values?

    Hi All, I want to display the rows number of times as the value exists in num column in the below query with t AS    ( SELECT 'venkatesh' NAME, 'hyd' LOC, 2 NUM FROM DUAL      UNION ALL      SELECT 'prasad' NAME, 'hyd' LOC, 3 NUM FROM DUAL      UNION

  • Is there a way to disable usb sync using configuration profile?

    Is there a way to lockdown an ipad to prevent data being copied via USB using a configuration profile. I couldn't seem to find any profile options in this regards.

  • I lose vision and when I press  Menu it reverts to start. How do I fix?

    In middle of a film or TV programme I lose vision though send continues. Wen I then press Menu, the programme reverts to beginning. How do I fix this?

  • MacBook random shutdown w/10.6.7 update

    I installed the 10.6.7 combo update this morning, and now I have a problem with random shutdowns. The problem persists even after a PRAM reset. When I run Apple Hardware Test, the short test reports no problem. The extended test...shuts down before c

  • Audio only Capture

    Hello Folks, I am currently working on information video project and before I hire voice-over artist, I recorded my voice myself in order to lay out the footage on timeline, however, my FCP3 just won't capture audio only even thou I set on "Audio Onl