HT1338 I have HP LaserJet 200 colorMFP M276nw and trying to install the driver on my mac pro; it gives me the error message that the driver is not available.

Hi,
I have HP LaserJet 200 colorMFP M276nw and trying to install the driver on my mac pro; it gives me the error message that the driver is not available.

Typically this is caused by the internal list of compatible devices in the Mac being out of date. All you should need to do is disconnect the printer from the Mac, run Apple Software Update (even if there are no updates, the list will still update), restart the Mac, connect the printer to the Mac, and add the print queue. If that doesn't work, let me know.
I am a printer tech for HP.

Similar Messages

Hello. I am running the newest version of itunes on my PC. everytime I try to copy a cd to itunes it gives me an error message that says I do not have write access for my itunes media folder or a folder within it. I cannot get this resolved.

Hello. I am running the newest version of itunes on my PC. everytime I try to copy a cd to itunes it gives me an error message that says I do not have write access for my itunes media folder or a folder within it. I cannot get this resolved using the solution given on the error message. I have been using itunes for 4 years and have never encountered this problem until yesterday. Help would be greatly appreciated.

Quit iTunes.
Go to My Music folder.
Select the iTunes folder, right click > Properties.
Click the Security tab and make sure you have full Read/Write privileges.

HT1351 My fifth generation nano will no longer sync my address book from my Mac. It gives me an error message that "You have no contacts" and asks me if I want to create some. My address book is full of contacts. Sync works for everything else.

My 5th generation nano will no longer Sync my address book from my Mac. It gives me a message that I have no "Contacts", and asks if I want to create some. My address book is full of contacts, but for some reason it thinks it is empty. All the other sync operations work fine including iCal. My Mac is running OS X 10.7.4.

It sounds like all of your contacts on your Mac running Lion are actually stored up in iCloud.
Several users running Mac OS X Lion and now ML (and iCloud) have no longer been able to "sync" contacts over to their older iPods models.
A work around is to export all of your contacts out of Address Book as vCards and them copy these vCards into your iPod's Contacts folder. You'll need to have the Enable Disk Use option ticked from under the iPod's Summary tab in order to browse out to the iPod's Contacts folder via the Finder.
Using your iPod as a storage drive
That's the only "solution" I have been able to use to get contacts to sync/appear on my 5G iPod Video.
B-rock

I have charter email. I was able to send attachments, but now can send no attachements - I keep getting an error message that the file cannot be read - help!

I stared using charter for email January of this year. At that time I was able to attach word documents, but not jpg files. In the last 2 months now I can't attach word documents, either. I tried to send word docs from a yahoo mail account I created to see if the problem was with charter -it's not. I have the exact same problem with yahoo mail. Is there anything going on with Mozilla that's preventing mail servers access/reading capabilites of my files?

Can you access the images on the phone with Image Capture (in the Applications Folder) ?

I have not been able to sync my iPad with my pc. It runs for an hour, never gets past the backing up stage and then gives me an error message that the action could not be completed. Any suggestions?

?

Several things to try.
Restart the iPad by holding down on the Sleep button until the red slider appears and then slide to shut Off. To power up hold the Sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the Sleep and Home buttons at the same time (for about 10-15 seconds) until the Apple logo appears (ignore the red slider), then let go of the buttons.
Disable your firewall and anitvirus software temporarily.
 Cheers, Tom

Can i set up network fax using HP LaserJet 200 colorMFP M276nw

is it possible to use the HP LaserJet 200 colorMFP M276nw as a network shared fax device?
it is set up as TCPIP wired device and works perfectly as a shared printer on a windows network.

Hi there dilligas, welcome to the forums
I saw your post about using your LaserJet 200 color M276nw as a network shared fax. Unfortunately, I do not see this in being possible.
This is information from the Microsoft forums on printer sharing: Share a printer
Have a great weekend
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Setup scan to folder on HP LaserJet 200 colorMFP M276nw

hello,
I am trying to set up my printer to scan to a nework folder.
HP LaserJet 200 colorMFP M276nw
OSX 10.9.4
WLAN (both printer and desktop on same network)
Here's the problem; no matter what I try, I cannot get the printer to scan directly to a network folder.
When testing the connection I either get the "invalid password or username" or the "cannot connect to network folder" error.
It seems the biggest issue is refering the printer to the right network folder.
I've shared the folder, but I cannot get a valid path name it seems.
The folder properties show: /Users/vdlely/Dropbox/max verhuur/Scans
Obviously this is not complete; I need to add the location of the machine, like: //iMac-van-AJ/Users/vdlely/Dropbox/max verhuur/Scans right?
No matter what kind of combination I try, nothing works. I've used computer name, IP, with and without login etc etc
What is the correct pathname in my case?
It would me MUCH easier if you'd added a simple browser to browse to the right location.
Please help me set it up right.
This question was solved.
View Solution.

Hi @Frederikcs ,
I'd like to help you with setting up the Scan to Network Folder.
Here is another post that might have clearer instructions for Yosemite that you may take a look at.
Re: Identifying the scan file for the Laserjet Pro 200 color MFP M276nw on a MacBookPro.
To get the IP address for the computer, go to the Apple, System Preferences, Sharing and then select File Sharing.
You will see the IP address on that window.
This is the information to enter into the Scan to Network folder from the printer's EWS, click the Scan tab, click Network Folder Setup, and then click New.
Network Path: \\computer's IP\folder name that you created.
Example: \\192.168.22.104\scan
Here is the document for setting up the Scan to Network folder. Scan From the Control Panel (Including Scan to Email, to a PDF, and to a Network Folder) for HP Lase...
Please let me know if you require any additional assistance.
Have a fantastic day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet 200 colorMFP M276nw-Can't print custom sized paper

HP LaserJet 200 colorMFP M276nw
I'm trying to print on a custom page Size (95mm x 171mm) but it starts printing about a third way down the page so the whole text insint printed. I adjusted the paper tray to the right size, canged the page size to my custom size. I tried to scale to destination paper size but the custom size wasn't in the drop-down menu (To get to the destination paper size: Mac OSX-File>Print>Paper Handling>Destination Paper Size area>Scale to Fit Paper Size box> Drop down list | Windows-Print>Properties or Prefrences>Effects>Print Document On box>Drop down list) So I don't know what the problem is because the size in bigger than the minimum(76mm x 127mm)
PLEASE HELP!

Welcome to the HP Forums dancer200013,
I see by your post that the custom size isn't printing correctly on the Mac or Windows computers.
I can help you with this issue today.
On the Windows computer, click on start, control panel, printers and faxes, right click the printer, left click properties, click preferences, the effects tab should be selected as actual size. Then select the Paper/Quality tab. Click on the custom button. Type in the size, type in a name you want to use, select save and OK. (if the name is too long the save button won't be active)
Close the preferences window and reopen it again.
Then on the paper/quality tab or Printing Shortcuts tab. Under paper size select the new paper size by the name you just created.
Test the printer.
Hope this helps.
Have a nice day.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet 200 colorMFP M276nw wont do a factory reset

Hi,
I have a HP LaserJet 200 colorMFP M276nw printer and I am unable to do nvram reset on it.
Can someome please help me?
Thanks.

Hi,
Looks like you've got many printers you need to reset. Please check the following post:
http://h30499.www3.hp.com/t5/Multifunction-and-All-in-One/HP-LaserJet-Pro-200-color-MFP-M276nw-Cold-...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I am unable to open a project that I have worked on and saved. I get an error message that the file is damaged and cannot be opened.

I am unable to open a project that I have worked on and saved. I get an error message that the file is damaged and cannot be opened.

Leslie Tanaka
Travel and detours have kept me from following up sooner. If the problem that you wrote about still persists.....
Let us go back over that Adobe document regarding troubleshooting damaged projects.
3. Delete the Application Preferences
Where you able to follow that path and delete the Adobe Premiere Elements Prefs file at the end of the path? And, after you did, did the saved/closed programs still refuse to open? If you could not carry out this procedure, what were the limiting factors that kept you from do
7. Test to see if individual media files are causing the problem.
That is an important one. How far did you get into following the instructions given in the document? If you could not complete the test, what was the major block that prevented you from doing so?
I want to make sure that we have gone through everything in that document and ruled all factors there in or out. If it was a matter of you not understanding the instructions, I am hoping that the above will channel you questions to me so that I can clarify anything that you did not understand in the Adobe document instructions.
I do not recall if I asked previously. Even if you cannot open all your saved/closed projects, can you still open a new project and save/close it? Maybe even reopen it?
Please review and consider.
Thank you.
ATR

I had just put the finishing touches on my 36 minute documentatary when I got an error message that the external 1TB HD I was using to store the project had been ejected improperly (must have shaken a cord). The result is that the project would not load

I had just put the finishing touches on my 36 minute documentatary when I got an error message that the external 1TB HD I was using to store the project had been ejected improperly (must have shaken a cord). The result is that the project would not load in the edit Projects window. I can see the file in the finder window and it will launch iMovie but the file itself will not load in the projects window.
I have contacted apple support and they tried to do a few things... to no available.
With my limited knowledge of file structures I assume that the header file must be corrupt.
Is there a 3rd party utility that can decompile and fix the file structure so it will load properly. I've been working on this project since june and would hate to have to redo the whole thing again.

I had just put the finishing touches on my 36 minute documentatary when I got an error message that the external 1TB HD I was using to store the project had been ejected improperly (must have shaken a cord). The result is that the project would not load in the edit Projects window. I can see the file in the finder window and it will launch iMovie but the file itself will not load in the projects window.
I have contacted apple support and they tried to do a few things... to no available.
With my limited knowledge of file structures I assume that the header file must be corrupt.
Is there a 3rd party utility that can decompile and fix the file structure so it will load properly. I've been working on this project since june and would hate to have to redo the whole thing again.

I've been receiving an error message, "That the .itl file is locked, on a locked disc or you do not have write permission". Can someone tell me how to unlock the file or disc?

I've been receiving an error message, "That the .itl file is locked, on a locked disc or you do not have write permission". Can someone tell me how to unlock the file or disc?

theres no - in "itunes" its all one word
try right clicking and running itunes as adminstrator or try on a different user account

I have LR 5. When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it...." How do I fix this?

I have LR 5. When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel."
How do I fix this?

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

I am trying to re-install Photoshop CS6. The files have downloaded but I get and error message that the Adobe Support Advisor is required to determine what the installation probIem is. I click on the link that says "get the Support Advisor here only to be

I am trying to re-install Photoshop CS6. The files have downloaded but I get and error message that the Adobe Support Advisor is required to determine what the installation probIem is. I click on the link that says "get the Support Advisor here only to be told the Support Advisor no longer exists!! A blind loop. I need to have Photoshop CS6 installed...what do I do from here??

The CC Cleaner Tool assumes the Akamai Download Manager is activated and it has not. It seems to be the missing file that triggers the error message. \in a previous re-install I was prompted to download & install the Akamai Download Manger, but not this time. Is there somewhere on the Adobe website that I can download it??

11.1.4 gives me an error message that says Service "Apple Mobile Device" failed to start. Verify you have sufficient privileges to start system services. Now, iTunes won't work at all.

11.1.4 gives me an error message that says Service "Apple Mobile Device" failed to start. Verify that you have sufficient privileges to start system services. Now, iTunes won't work at all.

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

HT1338 I have HP LaserJet 200 colorMFP M276nw and trying to install the driver on my mac pro; it gives me the error message that the driver is not available.

Similar Messages

Maybe you are looking for