HT1338 I'm trying to update the drivers on my epson dx4400 on Mavericks. Software update doesn't help. Any ideas?
I'm trying to update the drivers on my epson dx4400 on Mavericks. Software update doesn't help. Any ideas?
You could try deleting the /Library/Printer/EPSON and the /Library/Caches/Epson/ folder and then reinstalling the updates.
Similar Messages
-
i bought a factory unlocked iphone 4s. it was working fine but when i upgraded it to iOS 5.1 it gave me "no sim" message.
so i tried then to restore the iphone using itunes but it got worse it is giving me now "ICCID: unknown" message please help. any ideas?Please define "factory unlocked". The term is basically meaningless. iPhones are sold either carrier locked or unlocked. Some carriers will unlock them after a period of time upon meeting certain requirements and paying a fee.
There are lots of places that will "factory unlock" an iPhone. This basically translates to "hack". This can cause permanent damage to the phone. Best case scenario is these phones will re-lock to the original carrier on an update or restore. Worst case it they become expensive bricks.
ICCID unknown indicates a critical failure. There is no way to resolve this other than taking it in to Apple and getting the phone replaced. It's very possible that the phone was hacked and attempting to update has now killed it.
Where, EXACTLY, did you get this phone? -
I cloud worked fine for a while on the latest version of windows then threw up an error since then I can longer get the programme to run . I've reinstalled itunes but this doesnt help any ideas
It maybe worthwhile trying to uninstall and then reinstall the icloud control panel, if the issue is with your outlook.
-
Earlier today I was asked to update mu IOS which I did through my wifi (power connected). On return I just had the "connect to Itunes" icon. I've tried to restore the settings as suggested on the summary page but after downloading and verifying the connections and device the restoration locks up after about 30-40minutes due to an unknown error.
Is there anything I can do to overcome this?iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
Cheers, Tom -
'''seit irgend einem der letzten Firefox updates funktioniert die zoom Funktion des touchpads des MACs nicht mehr, allerdings nur bei Seiten im Firefox browser!'''
Some gestures have been removed in Firefox 4+ versions.
You can restore the zoom feature by changing the values of the related prefs on the <b>about:config</b> page.
* browser.gesture.pinch.in -> <b>cmd_fullZoomReduce</b>
* browser.gesture.pinch.in.shift -> <b>cmd_fullZoomReset</b>
* browser.gesture.pinch.out -> <b>cmd_fullZoomEnlarge</b>
* browser.gesture.pinch.out.shift -> <b>cmd_fullZoomReset</b>
* browser.gesture.pinch.latched -> <b>false</b>
To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
If you see a warning then you can confirm that you want to access that page.<br />
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold (user set).
*Preferences can be reset to the default via the right-click context menu if they are user set
*Preferences can be changed via the right-click context menu: Modify (String or Integer) or Toggle (Boolean) -
Wont install or update the drivers.. urgent! :(
Hello,
Ive been used the BETA for a while now, and I was looking forward to upgrade to the final version 2.0.
When I insterted my Leopard disk and tried to update my drivers, it couldnt install the REMOTE, TRACKPAD or the KEYBOARD support.
I tried to uninstall these drivers through DEVICE MANAGER, so I can install the new ones from scratch, but they didnt want to install either.
Now my keyboard or my trackpad wont work under Windows....
Can anybody help me???You should not uninstall these drivers from the device manager but use the software uninstall option to do this. If you can still use a mouse and the keyboard (unplug & re-insert the keyboard) then try a few other options.
To install the updated trackpad driver explore the Leopard DVD in Windows.
You will see a Driver folder, go into the Driver folder and continue into the Apple folder.
In the Driver\Apple folder are the Apple drivers for the remote, trackpad and keyboard. Just execute the individual installs to update the drivers.
This is really the brute force method, I propose this since you are currently in a bad state.
If you run into a similar problem in the future please use the software uninstall option in the control panel to remove the old drivers and use the repair functionality in the Boot Camp installer. -
I can't seem to connect my iPhone 5 to windows 7, it shows up under unspecified in the control panel but when I try to update the drivers it says access denied! Been at this for 3 days now! Tried numerous fixes, any help please?
The iPhone 5 and iOS 6 require iTunes 10.7. Depending on what OS you have for your comptuer, could restrict you.
Windows System Requirements
PC with a 1GHz Intel or AMD processor and 512MB of RAM
Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista or Windows 7
64-bit editions of Windows Vista or Windows 7 require the iTunes 64-bit installer
250MB of available disk space
Broadband Internet connection to use the iTunes Store
Macintosh System Requirements
Mac computer with an Intel Core processor and 512MB of RAM
OS X version 10.6.8 or later
Safari 4.0.3 or later
400MB of available disk space
Broadband Internet connection to use the iTunes Store -
Support problem. The adviser tried to diagnose the failure of an application called JOTNOT PRO to update. He said he'd phone back at 8pm. I pick up his call at 8pm. Electronic voice: thank you for calling apple. We are now closed" So now I have 2 problems: the adviser had got me to reset so bye bye wifi passwords and settings. And then when he phones back as we agreed he's not actually on the phone, it's just a voice saying Apple Support is now closed! What on earth is going on at apple support I wonder.
Anyway, the original problem: an application called JotNot Pro fails to update. The error message says something like "you cannot update this cos either you bought it with a different Apple ID or somebody else bought it."
Neither applies. Can anybody help?
PS. This is my first approach to the support community so please bear with me!
WilliamYou might have better luck contacting the app's support or developers.
-
I have two iPads one has iOS 7.0.4 the other has 5.1.1 have tried to update the 5.1.1 but keep getting message no update available
The first generation iPad can not be upgraded beyond 5.1.1
-
I just purchased a Canon MG5220. I have installed all of the updated drivers for 10.7.3. The scanner is working wirelessly, but I can't add my printer. Any ideas?
With most multi-function devices, you need to run the printer manufacturer's setup/configuring program first. That will either "Add" the printer directly, or make it discoverable in the "Add-a-Printer" window. Look around, you probably downloaded that program when you downloaded the Driver.
-
I have the latest operating system, but can't get my printers added. Why does the software update say that drivers for my printers are not available? I have the drivers installed from the CD but can't add the printer because it wants to go through software update.
It's pretty difficult to offer suggestions when you say nothing about your Mac, the version of Mac OS it's running, or the models of printers you have. This forum, however, is intended for questions about old, pre-G3 hardware, so unless you are asking about an very old Mac, this is not the forum where you'll be most likely to get help with your problem. I'd suggest you ask this question in the forum for your model of Mac or version of Mac OS X it's running. You'll be more likely to get assistance there, assuming you provide sufficient detail for anyone to make a diagnosis of the problem.
Regards. -
I am unable to update the newest version of itunes because I need to update my Mac OS X to version 10.6 or later but my computer keeps telling me that I do not have any updates available. I am currently running version 10.5.8
You need to buy 10.6 on DVD.
(74703) -
How to update the most recent Adobe Flash Player on Mavericks?
Does anyone know how to update the most recent Adobe Flash Player on Mavericks? I have downloaded and tried to install it but failed to install. It says "Install Adobe Flash Player" can't be opened because it was not downloaded from the Mac App Store.
-
I updated the latest version of iOS software on my Macbook Pro and now when I try to open up iPhoto it says that I need to update the latest version. But when I go to update on iTunes, it says the latest version is unavailable to the U.S. I wouldn't mind leaving it be but I can't access any of my photos. What do I do?
stuckoncc wrote:
I updated the latest version of iOS software on my Macbook Pro
iOS is on iPhones and iPads.
Are you using an iPhone or iPad? -
I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?
Logged the call with SAP who directed me to 'Define settings for attachments' in IMG and setting the 'Deactivate Java Applet' & 'Deactivate Attachment versioning' checkboxes - problem solved.
Maybe you are looking for
-
How can I change my email address on icloud, I have already changed it on my apple id, but it still is asking for lmy old email and password and I can not back up or anything?
-
I cannot send a photo as an MMS or as an e-mail as the recipient's address requires several slashes (/) which is unavailable on my iPhone 3GS keypad. How can I send them without using the slash?
-
Self user registration request fails during Approval.
Hi, My case is explained below. I have created a new user using "New User Registration" in the sign in page. Now the user is created in OID. I logged into identity manager using "xelsysadm" user. I clicked "Track Requests" and search, I could see the
-
TS1506 how do i save a word document attached to an email to my iphone
I am trying to save a word document from an email to my iphone 4s. I have looked on all of the support pages and have found that word . doc is supported but cannot see how i can save it in any way? I have followed all guidelines but now it is making
-
hello, Being a newbie to solaris I guess you don't mind if I ask few very basic doubts. 1. How does Solaris OS differ in the Intel and Sparc based Systems? ( URL/ Breif explation would help) 2. I've an opportunity to work in Netra i / Sun OS 5.6 /Spa