HT1338 I recently purchased a new Mac Pro w/ mountain lion 10.8 and I am using my Apple 30 inch monitor. When watching video or browsing certain websites, my monitor will flicker grey and sometimes lock up. I figure it is the grphic crd or I am missn a
recently purchased a new Mac Pro w/ mountain lion 10.8 and I am using my Apple 30 inch monitor. When watching video or browsing certain websites, my monitor will flicker grey and sometimes lock up. I am a video producer so this is quite frustrating...I figure it is the grphic card or I am missn a plugin or driver update? help!
Maybe this will help:
http://support.apple.com/kb/HT1573
PRAM reset: http://support.apple.com/kb/PH11243
SMC reset: http://support.apple.com/kb/HT3964
Similar Messages
-
My brand new Mac Pro running Mountain Lion crashes when installing updates or new software.
My brand new Mac Pro running Mountain Lion crashes and re-boots when installing updates or new software. I can only perform these operations while in the safe boot mode. I have reloaded OSX twice. Does not solve the problem. The machine is brand new. It replaced a previous MacPro that would not support the new Mountain Lion. When my new machine came in. I swaped the dirve out of my old unit into the new and ran the new Lion update. The machine has had this aforementioned problem since that time. Also, I had the Legacy version of File Vault running on the old machine/drive, which I also turned off(thinking that was the problem) but that did not fix the problem either.
Here is my panic log entry:
Sun Nov 18 22:08:42 2012
panic(cpu 6 caller 0xffffff800b4ac90b): Releasing non-exclusive RW lock without a reader refcount!
Backtrace (CPU 6), Frame : Return Address
0xffffff8556cab950 : 0xffffff800b41d626
0xffffff8556cab9c0 : 0xffffff800b4ac90b
0xffffff8556cab9e0 : 0xffffff800b51c09c
0xffffff8556cabc10 : 0xffffff800b510e92
0xffffff8556cabc40 : 0xffffff800b4ff375
0xffffff8556cabf50 : 0xffffff800b7e182a
0xffffff8556cabfb0 : 0xffffff800b4ced33
BSD process name corresponding to current thread: installd
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x000000000b200000
Kernel text base: 0xffffff800b400000
System model name: MacPro5,1 (Mac-F221BEC8)
System uptime in nanoseconds: 427147359117
last loaded kext at 111975561856: com.apple.filesystems.smbfs 1.8 (addr 0xffffff7f8ba85000, size 229376)
last unloaded kext at 127467947009: com.apple.driver.AppleIntel8254XEthernet 3.1.1b1 (addr 0xffffff7f8bf8d000, size 69632)
loaded kexts:
com.zeobit.kext.Firewall 2.3.1
com.apple.filesystems.smbfs 1.8
com.apple.driver.AppleIntelProfile 97
com.apple.driver.AppleBluetoothMultitouch 75.15
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOBluetoothSerialManager 4.0.9f33
com.apple.driver.AGPM 100.12.69
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.kext.AMDFramebuffer 8.0.0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleHDA 2.3.1f2
com.apple.AMDRadeonAccelerator 1.0.0
com.apple.driver.AppleMikeyDriver 2.3.1f2
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.2.11
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.driver.AppleUSBHub 5.2.5
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AirPort.Brcm4331 602.15.22
com.apple.driver.Intel82574L 2.3.0b4
com.apple.BootCache 34
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleUSBUHCI 5.2.5
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.AppleProfileTimestampAction 97
com.apple.driver.AppleProfileThreadInfoAction 97
com.apple.driver.AppleProfileRegisterStateAction 97
com.apple.driver.AppleProfileReadCounterAction 97
com.apple.driver.AppleProfileKEventAction 97
com.apple.driver.AppleProfileCallstackAction 97
com.apple.iokit.AppleProfileFamily 97
com.apple.driver.IOBluetoothHIDDriver 4.0.9f33
com.apple.driver.AppleMultitouchDriver 235.28
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.driver.AppleUSBAudio 2.9.0f6
com.apple.driver.DspFuncLib 2.3.1f2
com.apple.iokit.IOAudioFamily 1.8.9fc10
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOSurface 86.0.3
com.apple.iokit.IOAcceleratorFamily 19.0.26
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.iokit.IOBluetoothFamily 4.0.9f33
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.kext.AMD5000Controller 8.0.0
com.apple.kext.AMDSupport 8.0.0
com.apple.driver.AppleGraphicsControl 3.2.11
com.apple.iokit.IONDRVSupport 2.3.5
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleHDAController 2.3.1f2
com.apple.iokit.IOGraphicsFamily 2.3.5
com.apple.iokit.IOHDAFamily 2.3.1f2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.driver.AppleUSBHIDKeyboard 165.5
com.apple.driver.AppleHIDKeyboard 165.5
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0 -
Downgrading New Mac pro to Mountain Lion
Is it possible to downgrade a New Mac Pro to Mountain Lion?
Apple has removed the Open Transport API from Mavericks and we need it to run a specific medical program.
The software runs on our old Macs. Just wondering if its ok to do this on the new Mac Pro.Thanks for the thoughts people.
I didn't think it could be possible.
We have a solution - albeit a messy one.
The software component that is incompatible is a DICOM server (medical image server). The actual viewing software used to manipulate the image is compatible - just the image import component is not.
Putting it simply we will set up some folder aliases over the network so the viewing software will just use the image folders on the old Mac as their repository.
We have also contacted the developers to get them to update their software! As technically, it is not compatible with Mac... -
The time capsule was used with my prior Mac Pro laptop that unfortunately had the home vault active on it.
My new Mac Book Pro does not have home vault open. But I am unable to back up my new MAC pro laptop because it says there is not enough storage space available. Therefore, t there any way to just completely delete all the old backup data out of my Time Capsule from my prior Mac Laptop?
When I go into the time capsule - it shows me NOTHING as being in the backup datas. So, I don't know where to begin to delete all the old data off the
time Capsule and start with a completely empty machine.Therefore, t there any way to just completely delete all the old backup data out of my Time Capsule from my prior Mac Laptop?
Here is how to do this:
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click Manual Setup
Click the Disks icon at the top of the AirPort Utility window
Click the Disks tab below the icons
Click Erase
The "Quick Erase" option will only take a moment or two
Now you can backup your MacBook Pro. If you connect an Ethernet cable from the MBP to one of the LAN <-> ports on the TC, the first backup will go 3-5 times faster than wireless.
Once you have the first backup done, you can use wireless for subsequent backups since they will only take a few minutes -
I have a new mac powerbook pro OS X 10.8.1 and cannot connect to my canon 6000B printer - the printer appears in the printer list but will not install and I can't find a driver on the net - does anyone know what the solution is?
dino1335 wrote:
Thanks for getting back. I need help here
1 What do you mean by System Information? Is that System Preferences?
System Information is located in Applications > Utilities. It shows lots of information about your Mac, including information about the printer queues.
dino1335 wrote:
2 When I go to System Preferences and click on the printer LBP6000/LBP6018 there is no information in that window about the URI if I click Open Print Queue there is no information other than the ID of the printer
In previous versions of OS X you did see this information via the Options & Supplies pane for the selected printer in Print & Scan. But with 10.8 this information was removed so know you need to use System Information > Printers to see information about an installed printer.
dino1335 wrote:
3 If I print a document it just goes to print (it goes through the printer but no information is printed on the paper) there is no print cue so I don't know where to find the information on the URI or what I am supposed to copy
I believe that the document does not print because the print queue has not been created correctly. The CAPT driver requires a specific queue name and if the queue name is wrong then you will not be able to print.
dino1335 wrote:
FYI I also have a MacBook Pro (old) with Leopard which I also print to the same printer on and there isn't a problem with that just with this new MacPro which has Lion installed
Not surprised to read that. Mtn Lion has caused some issues for owners of CAPT printers, especially if they upgraded to 10.8 from 10.7 or 10.6.
Since you mention the ability to print on 10.5, I just want to check that you are physically moving the USB cable connected to the LBP from the 10.5 Mac to the 10.8 Mac, rather than sharing the printer from one Mac to the other. Because if you are sharing the printer from the 10.5 to the 10.8 Mac then this can be a cause of your current issue. The CAPT driver does not work when it is being shared to other Mac's. -
Hi I recently purchased a new mac computer and would like to sync the music off my iPhone to my new mac.However, my phone and my new mac have different apple Ids.The PC which my phone is synced and has the same apple ID but does not let me transfer the music. Home sharing is not working. How do I successfully transfer and sync the music off my ipone 4 to my mac book pro if they have different Apple IDs? Thanks!
What do you mean the PC won't let you transfer the music? Save your entire iTunes folder (this is assuming that you have all your music stored in your iTunes folder) to an external hard drive. Connect that hard drive to your Mac. Copy the iTunes folder to your computer. Hold down the option key while launching iTunes on your Mac. Select the library you just copied when it ask you to select which library you want to open.
-
I have my iTunes music folder stored on an external hard drive. I recently purchases a new Mac. After attaching the external hard drive, all songs imported without a problem except my playlists. Any clue about where they are or how to revive them for use on my new Mac?
Thanks!Rysz wrote:
To retain your playlists, artwork, play counts, etc, you need to move the entire iTunes folder, not just the music files..
Correct.
After that just select the new folder location in iTunes> Advanced settings.
Incorrect.
Hold Option and launch iTunes.
Select Choose library and select the iTunes folder.
This will read the iTunes library.itl file in this folder and the library as it was previously will be opened. -
Hi,
I purchased Huawei Dongle and trying to connect with my new MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support.
When I plugged in my macbook the power is flowing in dongle due green light blinking twice in every 3 sec but no connection found or diver shown.
Please let me know how I have to use it. I got some suggestion for USB hub 2.0 but It does not make any sense and driver installation.
So please suggest proper direction to use it and provide link to install any driver.
Thanks
Tauheed AhmadYes Clinton I did same, but they were (Huawei customer support) surprised about this problem, They behave like they have no idea about USB 2.0 and 3.0 knowledge. They handsUp that reason I posted my problem in this forum.
So is there any better solution to use any mediator between these USB version handling, Please let me know.
Thanks
Tauheed -
Hi! is it possible that Logic X has upgrades that work only with mavericks and does t work in mountain lion....since in my macbook pro with mavericks i have new views of the equalizer, etc and in my mac pro with mountain lion it still the old view...
Any OS version of 10.8.4 or later has all features that are not OS depended. The plugins are one example. You probably haven't updated all versions of Logic Pro X to the latest one.
-
I recently bought a new mac including OS X Lion and the store manager told me that I can also trasfer it to my old mac but I don't know how! Can anybody help me?
You were given wrong information. The copy of Lion on your new Mac is licensed only for that machine, and you can't copy it to another one. If you buy the Lion upgrade from the App Store, you can install it on all the Macs you personally own.
-
Connect my new Macbook Pro with Mountain Lion to my HP PhotoSmart B210
How can I connect my new MacBook Pro with Mountain Lion to my hp b210 printer? My printer is about 1.5 years old and works wirelessly just fine with my PC. I just switched to mac. The printer is supposed to be airprint compatible according to HP. HP has no software drivers for me to download. Instead they say to use Mac Software Update to get the software. However, there are no updates when I try that. I have tried adding the printer manually using it's IP address and can print a test page, but when I try to print using an application on the Mac it cannot find the printer or says the printer is in use. Help!!!
Are you sure it has no usb port?
http://h10010.www1.hp.com/wwpc/us/en/sm/WF06a/18972-18972-238444-421635-410635-4 021933.html?dnr=1
Connectivity, standard
1 USB (2.0); 1 Wireless 802.11b/g/n
The usb cable you need looks like: -
Hi,
I have recently updated my iMac from OS x mountain lion to OS X Mavericks.
After that I can't upload any video and some files to my personal email account.
I have tried to send a small video clip to the sender as attachment. i have done this before
with the same video same and same email account. This problem found just after installed the
OS X Movericks. Can anyone please help me to sort this problem.
Thanks.
RomanPlease follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in earlier versions there is only one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
~/Library/Containers/com.apple.MailServiceAgent
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return. -
Why can't I update my Mac Pro to Mountain Lion?
Here is the system info for my Mac Pro. I'm told I can't update to Mountain Lion because my Mac isn't compatible. I run pro Tools and now I can't even stay current because Pro Tools 11 requires 10.8 or better. *** is going with you Apple? Do you REALLY think I'm going to go out and spend another 3500.00 just to update my system software. This is a disgrace.
Model Name: Mac Pro
Model Identifier: MacPro2,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 3 GHz
Number of Processors: 2
Total Number of Cores: 8
L2 Cache (per Processor): 8 MB
Memory: 24 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP21.007F.B08
SMC Version (system): 1.15f3
Serial Number (system): 40******0GP
Hardware UUID: ******
Fix it
<Edited By Host>OS X Mountain Lion system requirements
To install Mountain Lion, you need one of these Macs:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory
8 GB or more of available space -
I cannot seem to update Garageband 11 on my new MacBook Pro retina (Mountain Lion)
Hi,
I've just bought a new 15" MBP retina (Mountain Lion). I have Garageband '11 pre-installed.
When i try to add additonal instruments Garageband opens a prompt box and asks if I want to update now or later. I have tried both options and neither work - the app store opens but it cannot find any updates.
Any help would be much appreciated.
thanksSometimes you need to reload the updates page at the App Store after you selected to "Update Later":
From the App Store main menu bar: Store > Reload page
If that does not bring the update forward, see my post here:
Re: Can't download loops for Garage Band '11
Regards
Léonie
Maybe you are looking for
-
USB hub does not work with iTunes
I have been trying to add USB ports to may Mac's and am not able to synch through the hub. They are hi speed 2.0 USB hubs by Rocketfish and Belkin. iTunes locks up until I remove them from the USB cable (spinning color wheel) and then iTunes goes bac
-
Sorry this is my first time here! I have a new computer and so wanted to put the music from my ipod onto the computer and to back it up. i backed it up and then realised that there was a software update, so did this. I then thought i was supposed
-
Qosmio X500 Folder migration utility and low disk space drice C
This may be a longish post as I try to explain my problem... please forgive. I've had my X500 for just over three months now. It took a little while before the folder migration utility woke up I didn't know it was there after I'd done a limited copy
-
Hi , We are on EP6 SP10 and have a strange issue involving collaboration rooms.We are having MS-AD UME. Now after changing from one ldap to another , some users are displayed as ldap id's in the rooms while some are not. They are displayed properly w
-
Hi, I got a Vista, so I want to connect my Mac with it. However, I don't know how to do it. I cannot see my PC on my Mac and vice versa. Mac is Leopard, so is there anyone knows how to do it? Thanks.