HT1338 I want to print via my orang livebox through a cannon mp210 printer/scanner. Orange and Apple information suggests this can be done. I have attached the USB cable to the livebox and printer, reset the livebox no result. installed printer cd on imac
How do I print wirelessly via a cannon mp210 printer/scanner. I have followed guidance re-routing the USB from PC to livebox and printer, reset the livebox and installed printer drivers on the imac to no avail.
How do I print wirelessly via a cannon mp210 printer/scanner. I have followed guidance re-routing the USB from PC to livebox and printer, reset the livebox and installed printer drivers on the imac to no avail.
Similar Messages
-
Reset an Apple TV 3 but I don't have a micro usb cable right now. What to do?
So, I want to reset an Apple TV 3 but I don't have a micro usb cable right now. What to do?
I have mini USB cords but no micro USB cords. The instructions on the Apple website assume that the customer has a micro USB by stating, "Connect one end of the micro-USB cable to the back of your Apple TV, and the other end to one of your computer's USB ports." As a customer, I understand by the language used that I should have the micro USB included with the Apple TV. If we are to supply our own micro USB cables, a re-wording of the instructions would alleviate any misunderstandings. Apple should start out by writing, "You will need to obtain a micro USB cord separetely from the Apple TV."
-
Hello. My Apple TV is flashing quikcly and I don't have a micro-USB cable to connect it to iTunes and restore it. What can I do? Thank you.
Buy the cable, or take it to Apple.
-
When I plug my iPhone into my computer to sync my iTunes I get a message that says "iTunes cannot read the content of the iPhone" and wants me to restore my phone back to factory settings. Any suggestions so that I don't have to restore? I have all of my stuff backed up on iCloud but I really don't want to go through the hassle of wiping it clean and putting everything back on.
This is a post from a user named edgar999 and it worked PERFECTLY:
"OK - this is how it works:
In order to backup from iCloud you cannot use iTunes!
Therefore disconnect your device from your computer.
Turn on your device and go to Settings and then go to General.
At the bottom of this submenu there is a buttom "Reset"
If you push that buttom you see 6 different Erase settings to chose from!
Chose "Erase All Content and Settings" because this will wipe everything from your device and will let you restore from iCloud! (I tried the top "Reset All Settings" but that did not let me use iClouds afterwards!)
Once you pushed that buttom your device will be wiped clean and after some time you will see the Device Welcome Screen like on a new device!
After choosing your location you will be asked to setup your WiFi-conection. After you joint to your Wifi you will be given the choice to restore the iPad from a backup from the iCloud. Choosing this backup will prompt you with your apple ID and password.
Restoring from a backup can take some time. The process uses your Wi-Fi connection to download settings, content and data. If you had a lot of content on your device, this can take a while. The restore screen should give you estimates at each stage of the restore process, starting with restoring the settings and then booting into the iPad. When the iPad home screen appears, the device will continue the restore process by downloading all of your applications.
If you are restoring from a backup because you have run into problems with your device that can only be solved by restoring it, you can first choose your latest backup. If you still have problems, you can move on to the next latest backup, repeating the process until (hopefully) the problem is cleared."
THANK YOU edgar999!!!! -
hi, I don't remember the answers for my security questions and I don't have "send an email to your rescue email address to reset your security questions and answers" when I select "Password and security" on my apple ID. What should I do?
Hi Roy,
Contact iTunes support:
https://getsupport.apple.com/GetproductgroupList.action
Select your country, complete the prompts.
Or you can contact them by email:
https://ssl.apple.com/emea/support/itunes/contact.html
They usually will get back to you via your regular email within 24 hours.
Cheers,
GB -
I want to de-install mac-excel test version and get the error message: 'You have not the privileges to de-install. Please login with the Mac-OS account you have installed mac-excel originally'. I don't know this account anymore. Possibly it does not exist anymore. anybody out there who can help ?
Hi, I may suggest to activate the root account and try the uninstall process from that account. To do so, you have to:
Go to System Preferences a open up the Users pane;
On the left side of the pane, you shuold see Login Options;
Enabled editing option clicking on the lock (it will ask your password);
Once the pane is enabled, you should see something like Server Account Network (sorry my OS is in italian, so I don't exactly know the right translation), and right next to it a button;
Click on that button, and a new pane shows up. Click on Open Directory Utility, and on the upper bar of OS X click on Edit;
Select Enable Root Account (you can set a password, or not);
Done that, you should log out and when the login window show up, type on the user field "root" and the password you choose;
Theorically, from this account you will be able to unistall the application.
After completing your task, I reccomend you to disable the root account, just by loggin in your personal account and repeating the steps I described before. Hope it helps -
I use Adobe Premiere Elements 11. I want to make a Credit Roll and start off screen and stop with the credit remaining still in the middle of the screen. I know this can be done with CS6. Can this be done in Elements 11? Does Elements 12 or 13 have these options for Credit Roll.
stevel
Please read my work on this topic which involves Premiere Elements Preroll and Postroll settings.
ATR Premiere Elements Troubleshooting: PE: Preroll and Postroll Options Interpreted
Especially the section relating to Titler, Roll and Crawl Titles.
Please let us know if that worked for you.
Thank you.
ATR -
I want replace my desktop with a iPad to do emails and Microsoft office work. Can this be effectively done? What's the downside if any?
I'll go down your list one by one.
1. Access mail - which I know that the iPad can do.
Enough said.
2. Save an excel or word or ppt of PDF attachment for review.
You can view these types of documents natively on the iPad as Tgara has mentioned.
3. Open an review and maybe change a excel or word file.
There are many apps that allow this. I personally prefer Apples iWork programs, Pages, Numbers, Keynote. They tightly integrate with iCloud.
4. Resave such above files.
With Pages, Number, Keynote you can save/resave files in iCloud and locally. Also you could use dropbox to save your files on dropbox and provide a way for you to share a folder with coworkers/family and they can add/view/review files from there and you can see the changes on your device.
5. Reply to a mail attaching a file.
This is possible in many ways. From dropbox, or another app you can email files with the share button.
6. Be able to rename files and store them in specific folders.
This goes back to dropbox/iCloud. iOS doesn't really have a traditional file system. If you save a PDF it isn't saved anywhere you can just open it. You would have to open an app that supports view PDFs and select the PDF you wish to view. The same goes for documents, spreadsheets and etc.
Hopefully this helps answer your questions. -
I don't have a DSL or cable modem to access the Internet ... just a mobile WiFi (there is no cable available at our house and the mobile WiFi is our only option). How do I connect my Time Capsule to the Internet via the mobile WiFi?
LOL!!
I am in Australia and the ISP... I think both the main ones would fit your description to a T.. big T in particular.
Your router is really unsuitable.. if it is only wireless and no ethernet.. just buy an ethernet one.
Do a search on ebay.. 3g router.
But you can get the TC to join a wireless network.
It is a non-standard setup that Apple will not support.. the option is hidden.
If you are on Lion download the 5.6 utility. Go to the wireless set up page and hold down the option key whilst selecting wireless mode.. a new option, join will appear. You can then put in the ssid and passkey of the 3g router.
But please note the end result of this setup..
very slow speed. The TC is now a second wireless hop from your clients.. this will halve the speed.
In this mode the ethernet are deactived.. for reasons only Apple know, they decided you should not use ethernet when doing this. -
I have just agreed to software updates on my imac and now can't open my mail. There is a message saying this version of mail isn't compatible with this latest software. I have located the updated mail in the applications folder but it won't open. I don't have the original operating software disk. Does anyone have any suggestions?
Your reply suggests that you have moved Mail to a different location, which (as I said) will prevent it from being properly updated. You cannot use Mail 4.5 with any recent version of Mac OS X. Mac OS X 10.7 (Lion) included Mail 5 and Mac OS X 10.8 (Mountain Lion) includes Mail 6. I'm assuming that you have either Lion or Mountain Lion, but if that is incorrect, you will need to provide that information.
At this point, you will need to reinstall your system. Hold down command-R at startup and reinstall the system right on top of the old one. This should not disturb any of your documents or applications, though you should have backups beforehand in case something goes wrong. And at this point, with your system in an uncertain state (I don't entirely know what you have done to it), something could go wrong.
You will also want to delete the old copy of Mail 4.5, wherever that is. You can't use it.
In the future, do not move any of the preinstalled applications. Leave them where they are. -
Currently, I can copy ONE tab's url and nothing else (not its name). Or I can bookmark all tabs that are open. However, I'd like to have the ability to select multiple tabs and then copy ALL of the the URLs AND their titles/or copy ALL of the URLs+titles+HTML links? This can be done with the Multiple Tab Handler add on; when I download the add on, I get a message saying that using the add on will disable Firefox's tab features. I prefer to use Firefox features rather than download and use an add on. Is there a way to do this without an add on?
Hi LRagsdale517,
You should definitely be able to upload multiple files by Shift-clicking or Ctrl-clicking the files you want to upload. Just to make sure you don't have an old version of the service cached, please clear the browser cache and then log in to https://cloud.acrobat.com/files. After clicking the File Upload icon in the upper-right corner, you should be able so select multiple files for upload.
Please let us know how it goes.
Best,
Sara -
Hello to all my readers.I am still using my Apple G4 1.25 Ghz MDD running Leopard 10.5.8 with iTunes 10.6.3 installed. Can I use an Phone 4s with iOS 5 with this set up? I have read the iPhone iOS 5 user guide and it appears that I can but is anybody actually doing it ? My current phone is a £10 Nokia and I've neither wish nor cash to spend more than a grand upgrading to an intel based machine (at the moment) ! Regards to you all.
If you can find an iPhone running iOS5 and those are the specs for iOS5, there is no reason it should not work.
If you want a more current version of iOS or a more current device, a Windows computer is always an option at significantly less cost.
Granted, there is no requirement to have a computer to use an iPhone. -
When typing the name of the contact I want to send a text message to, names from my contact list no longer pop up as suggestions. Can anyone help me with this?
There's always a way to reset the device jmn33! Thanks for keeping us in the loop. To process a full reset/restore on the device please visit http://vz.to/12TLCsR. Please keep us posted once this is completed, thanks!
MatthewS_VZW
Follow us on Twitter @VZWSUPPORT -
My goal is to only sync my calendar to iCloud and exclude everything else. This way I don't have to pay for more space.
Hey Murphie,
I don't pay for more space and I'm backing up two devices to iCloud, a 32G ipad and a 16G phone.
However, you can merely chose NOT to backup to iCloud. Then you won't run out of space. Items synced to iCloud do not take up your backup space.
Now, you WILL have to back up to your computer via iTunes the old fashioned way, or risk losing valuable data. Your choice.
However, if you manage your data responsibility, you won't run out of your 5G of storage on your iCloud backup from normal use.
Good luck -
How can we add additional fields to the BP Search RESULT screen?
Dear Experts,
How can we add additional fields to the BP Search RESULT screen so that the BP's being displayed in a search result show maintained values for the particular column/field?
Thanks!!!Hi Laxman,
I got same requirement for ibase hierarchy.I want to add new fields in Ibase hierarchy AB.Do you have any idea regarding this.My requirement is that ,i want to dispaly a fields as a check box which display that this component is in under warranty or not by checking the box.Plz tell ,how can i add a new field in tree type context node.I add a new fields using AET ,but that is not available in that AB.
Thanks
Vishwas Sahu
Edited by: vishwas sahu on Nov 17, 2009 1:51 PM
Edited by: vishwas sahu on Nov 18, 2009 5:22 AM
Maybe you are looking for
-
ASA and RADUIS on Windows server 2012
hi i have ASA5505 i want to get the Authentication from Raduis Server using NPS on windows Server 2012 i test the Raduis Server over "Kerio Control VMware Virtual Appliance" its work Perfect for testing my Setting on Raduis but with the ASA5505 i ge
-
Magsafe indicator faint/dim and blinking amber/green
I am working on a Macbook purchased in November 2008. Until now, no problems, but this morning after a full night's charge, I ran it for about two hours without being plugged in. When I plugged it in to charge, the indicator light on the magsafe woul
-
Get specific filenames and sizes from a folder based on a list of variables
Hi, I have a folder containing user's OST files, with various filenames: \\myserver\OST share\JBLoggs - Outlook 2010.ost \\myserver\OST share\CKent - Outlook2013.ost \\myserver\OST share\BAllan Myoutlook.ost There are several thousand files, and I ne
-
hai, i am developing a email application in java. i need to send mail to bulk members..how do i achieve it. all members in the mail should not know the other member mailid...how to do that. if any one can guide me and if source is provided..that will
-
Parameters in init.ora not changing in DB
Oracle 9.0.0 Redhat 7.2 Trying to set up utl_file_dir in the init.ora file and, although the entry in the init.ora looks correct (utl_file_dir=/tmp/xxx), the value for utl_file_dir in sqlplus (show parameters utl) never sees the value (ie always show