HT1338 iMac with an OS X 10.5.8 version from 2009.
I am try to upgrade it but so far I have not been able and it says it can not be done. For that reason I am getting problems with some programmes like Chrome, Flash and Firefox. Can I do anything about?
To upgrade beyond 10.5.8 you need the 10.6 DVD.
It costs about $20 and can be ordered online here (in the U.S. and elsewhere)
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
after which you can use Software Update to update to 10.6.8
Similar Messages
-
HT1338 iMac with OS x 10.5.8 upgrade to run with ipad mini
Currently running OS X 10.5.8 on an iMac6,1 (Processor Name:Intel Core 2 Duo). Need to upgrade software to sync with Ipad Mini, can I go straight to Montain Lion, or what are the required steps? Thanks
You need to buy a Mac OS X 10.6 DVD and then run Software Update. No further OS upgrades are needed; if it matters, that Mac can't run Mountain Lion.
(78042) -
I have recently upgraded my MacBook Pro to 10.9.
I also used it to save a copy of files from my iMac that was being serviced (sytem reinstall).
I now want to transfer files back from my Macbook(10.9) to my iMac which was loaded with 10.8.5.
But they do not recognise each othert in the Mirgation Assistant program when they get to the looking for another computer segment.
Is there a simple workaround?
Or am I missing or misunderstanding something?Reverse migration of data (from a newer system to an older one) isn't supported. You'll have to copy the files manually, and some, such as your Mail database, may be incompatible.
-
When I purchased it I was told that I can use Lion on up to 10 Macs under the license agreement.
I'm sorry to tell you that whoever told you that was wrong. The version of Lion that comes WITH a new computer is only licensed to be used with that one computer. Now, when you BUY Lion OSX from the App Store THAT copy is indeed licensed to be used on several Apple computers that you own.
Hopefully that helps. (You'll find other threads in this Forum, that repeat what I have told you.) -
One computer with 2 accounts-how to move an iPad from one to the other.
imac with 2 accounts-how to move an ipad from one account to the other account
Yes it is possible using PAPI. I have just used PAPI to create instances . I have not tried the requirement which you want. But as per my knowledge it can be done.
Good Luck
Right Chord -
I have an iMac with version 10.5.8 Mac OS X, can i upgrade to the latest Mountain Lion S X from the Apple web page.
When I tried, it said I had to have 10.6 or later............how do I get there?No. You need to phone the online Apple Store and order Mac OS X 10.6 on DVD.
(71007) -
HT1338 I have an iMAC with OS X 10.4.11. HOw can I update the OS?
I have an iMAC with OS X 10.4.11. How can I upgrade the OS?
OK. You can upgrade all the way to Mountain Lion if you wish. But you will need to upgrade RAM once you get to Snow Leopard - 10.6.x and above. Here's the requirements:
Snow Leopard General requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible Internet service provider; fees may apply.
Some features require Apple’s MobileMe service; fees and terms apply.
Lion System Requirements
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply.
Apple - OS X Mountain Lion - Read the technical specifications.
Macs that can be upgraded to OS X Mountain Lion
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
Are my applications compatible?
See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
You can upgrade your RAM:
Maximum Memory
6.0 GB (Actual) 4.0 GB (Apple)
Memory Slots
2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMMs
I would recommend upgrading to the maximum your computer supports. -
I have an imac with OS x version 10.5.8
How do I upgrade?I don't know.
What Mac do you have?
How much RAM does it have?
How much free disk space does it have?
Allan -
HT1338 I have tried to updated my iMac with Mountain Lion.
HELP!! I have tried to updated my iMac with Mountain Lion, OS X 10,8,3 (12D78) to 10,8,4, it keeps asking me to restart to install the updates, having tried this 20 times the app still has update available and I just go round again. how can I get this to finish and update correctly
Try downloading the update from the Apple Downloads site. http://support.apple.com/kb/DL1658
Or, you might try booting into Safe Mode and try to install through App Store. http://support.apple.com/kb/ht1455 -
I try and download Aperture but i get a dialog bos saying 'Aperture cannot be installed on macintosh HD because OSX 10.9 or later is required. I am using an imac with OSX Mavericks
Welcome to Apple Support Communities
Are you sure you are using OS X Mavericks? OS X Mavericks is 10.9, so it looks like you are using an older OS X version. To check this, open > About this Mac, and check Version.
To get Aperture from the Mac App Store, upgrade to OS X Mavericks. Open the Mac App Store and download OS X Mavericks. Make a backup of your files with Time Machine and check that your apps are compatible > http://www.roaringapps.com
After upgrading, you will be able to purchase Aperture -
HT1338 imac 10.7.5 crashes with skype, imovie etc
+ iphoto +adobe++++++++
Hi all,
I like to give an update to my old discussion: partly solved.
1#
I do not have issues any more with endless bootup - solved by repairing access rights from time to time
2#
I still do have the issue that my iMac is hanging from time to time (matter of hours). Usually no kernel panic or anything I can hook on, but mouse and iTunes keep on moving and playing. I have lately updated to 10.9. Same issue. So it must be HW. Unfortunately. -
This is a copy of a post from my blog, you can also Read it on my blog...
Introduction
After I received my new iMac with a 3 TB Fusion Drive, I was disappointed when I realized that Bootcamp was not running on this model and prevented me from installing Windows on it. I wanted to take advantage of the powerful iMac hardware to play games but I couldn't.
There are a few ways of working around this limitation, but I found most of them quite complex and most of the time they required formatting the internal hard drive or repartitioning it and go for a brand new installation of Mac OS X. I was not comfortable with that.
But there is another way, and that is to install Windows on an external hard drive, using either USB or Thunderbolt. Personally I used a Lacie Rugged 1 TB drive that has both USB3 and Thunderbolt connectors. Both work very well.
This guide may interest you if:
You have an internal hard drive of more than 2TB and you can't run bootcamp at all (like late 2012 iMacs with a 3TB drive)
You have limited space or you don't want to dedicate disk space on your internal hard disk drive to a Windows installation
What this guide will make you do:
It will make you erase all your data from your external USB3/Thunderbolt hard drive
It will make you install Windows on your external USB3/Thunderbolt hard drive
It will make you install bootcamp drivers
What this will not make you do:
It will not make you modify anything on your internal Mac hard drive
It will not make you use or install the bootcamp assistant
It will not activate the Preference Pane for the default boot drive. You have to boot by pressing the ALT key to manually select your boot drive each tome you want to boot Windows.
What you'll need
An external hard drive with a USB3 and/or Thunderbolt connector. This drive will be formatted so ensure you saved your files before going further. You can use either an SSD drive or a classic hard drive.
A Windows 7 or 8 install DVD or ISO (check whether to install 32 or 64 bits versions based on your Bootcamp drivers) and the corresponding Windows serial number.
One of the following:
Mac OS X with a Windows 7 or 8 Virtual Machine (use VMWare Fusion or Parallels Desktop for example. Note: VMWare Fusion seems to have some issues with Thunderbolt and USB3. Plug your drive to a USB2 enclosure or hub to work around this -it worked for me-, or use another VM software) → Read the important note below
A PC running Windows 7 or 8 → Read the important note below
Windows AIK (free) running on your Virtual Machine or on your PC, or just the imagex.exe file (the rest of the Windows AIK package is not needed)
Download imagex.exe
Download Windows AIK (this download and installation is not required if you have already downloaded imagex.exe)
Bootcamp drivers for your Mac. You can get these either by running bootcamp from your Mac (Applications > Utilities > Bootcamp) or, if like me you have a 3TB drive and can't run bootcamp at all, use the direct download links here.
A USB stick to store your bootcamp drivers
IMPORTANT: If your Mac has a 64 bits processor, your Windows Virtual Machine on OSX, your Windows installation on your PC and your Windows DVD/ISO must also be in 64 bits!
Step by Step guide
Step 1: Get the install.wim file
If you have a Windows ISO file:
Mount the ISO
If you're on OS X: double click on the ISO file
If you're on on Windows 7: Use a software like Virtual Clone Drive (free)
If you're on Windows 8: double click on the ISO file
Open the mounted drive, then go to the "sources" folder and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
If you have a Windows DVD: open the "sources" folder on the DVD and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
IMPORTANT: If instead of a "install.wim" file, you have "install.esd", you can not continue this step by step guide. And an ESD file can not be converted into a WIM file. So you must get a version of the Windows installation DVD/ISO that has an install.wim file.
Step 2: Clean, partition and format your external hard drive
On your Windows installation or virtual machine, plug in your external hard drive (can be plugged using USB2, USB3 or Thunderbolt at this stage)
Open the command prompt in administrator mode (cmd.exe). To run it in administrator mode, right click on cmd.exe > Run as admin.
Type the following and hit enter to open the disk partitioner utility:
diskpartType the following and hit enter to list your drives:
list disk
This will display a list of disks mounted on your computer or virtual machine. Make sure your drive is listed here before you continue.Identify the disk ID of your external hard drive. Replace # by your real external disk ID in the command below:
select disk #Clean all partitions by typing the following (warning: this will erase all data from your external drive!):
clean
Create the boot parition by typing the following followed by the enter key:
create partition primary size=350
This will create a 350MB partition on your external driveFormat the partition in FAT32 by typing the following:
format fs=fat32 quick
Set this partition to active by typing:
active
Assign a letter to mount this partition. We will use letter B in our example. If B is already used on your PC, replace B by any other available letter:
assign letter=b
Windows will detect a new drive and probably display a pop-up. Ignore that.Create the Windows installation partition using all the remaining space available on the external drive by typing the following:
create partition primary
Format the new partition in NTFS:
format fs=ntfs quick
Assign a letter to mount this partition. We will use letter O in our example. If O is already used on your PC, replace O by any other available letter:
assign letter=o
Windows will detect a new drive and probably display a pop-up. Ignore that.Exit the disk partitioner utility by typing:
exit
Step 3: Deploy the Windows installation image
Still using the command prompt in admin mode (you didn't close it, did you? ), locate the imagex.exe file mentioned in the "What you'll need" section and access its folder. In our example, we have put this file in C:\imagex\imagex.exe
Type the following and hit enter (remember to replace o: with the letter you have chosen in the previous step):
imagex.exe /apply C:\wim\install.wim 1 o:
This will take some time. The Windows installation image is being deployed to your external driveOnce done, type the following to create the boot section (remember to replace o: and b: with the letters you've chosen in the previous step):
o:\windows\system32\bcdboot o:\windows /f ALL /s b:
If you get an error message saying that you can't run this program on your PC, then most probably you are running on a 32 bits installation of windows and you're trying to deploy a 64 bits install. This means you did not read the important notes in the beginning of this guide
If you get an error message on the options that can be used with the BCDBOOT command, then it's because you're installing Windows 7, and the /f option is not supported. If that is the case, remove /f ALL from the command and retry.
Step 4: Boot from your external drive and install Windows
Plug in your external drive:
If you've done all the previous steps from a Windows PC, unplug your external drive from your PC and plug it to your Mac, either on a USB3 or a Thunderbolt port.
If you've done all the previous steps from your Mac using a Virtual Machine, ensure the external drive is plugged in to a USB3 or Thunderbolt port. Using USB2 should also work but you'll get very poor performance so I don't recommend doing that.
Reboot your Mac and once the bootup sound is over, immediately press the ALT (option) key and release it only when the boot drives selection screen appears. If you did not get the boot drives selection screen, reboot and try again. The timing to press the ALT (option) key is quite short. It must not be too early or too late.
On the boot selection screen, choose "Windows" using the arrow keys on your keyboard, then press enter.
The Windows installation starts. Follow the on-screen instructions as normal. The installation program will restart your computer one or 2 times. Don't forget to press ALT (option) right after the bootup sound, and boot on Windows again each time to continue the installation.
Step 5: Install bootcamp drivers
Once the Windows installation is complete, plug in the USB stick where you stored the bootcamp drivers (see "what you'll need" section), open it and right click on "setup.exe" and select "Run as admin". Follow the on-screen instructions.If you have an error saying that you can't run this program on this PC, obviously you have installed a 32 bits version of Windows and the bootcamp drivers for your Mac are made for a 64 bits version. You have to restart the whole guide and make sure to get a 64 bits version of Windows this time!
Once the bootcamp drivers are all installed, reboot and press ALT (option) after the bootup sound to boot on Windows again. And Voilà, you have Windows installed on your USB3/Thunderbolt drive running on your Mac.
Now each time you want to boot on Windows, press and hold the ALT (option) key after the startup sound and select "Windows", then press Enter.Hi i'm trying to follow your guide, I installed windows 8 on bootcamp to do it planning to remove it after the operation is done, but i get stuck at part 3: every command i give to imagex i get a pop-up ftom windws asking how do I want to open this kind of file install.wim and imagex does nothing, what do i have to do to stop those pop-ups?
-
Possible solution for white C2D iMacs with screen artifacts or lines
I have a white 20" Core 2 Duo iMac with the famous screen artifacts issues. Screen tearing, horizontal lines, goofy pixels, you name it. From my research it seems there are countless others with these problems.
I tried running the SMC fan control app to boost fan speeds. This helped a little, but did not completely solve the issue. A lot of people think these issues are related to heat, and I agree, but only partially. When a graphics chip overheats it is eventually damaged. I have damaged my share of graphics chips while overclocking them in my PCs. In the case of my iMac and maybe plenty of others, I still have issues if the GPU is hot or cold.
I installed WinXP using bootcamp. I finally found an application which will change the clock speed of the GPU on the fly. The X1600 GPU in my iMac has a 475Mhz core speed and 500Mhz memory speed. I cut these down to 400Mhz on the core and 400Mhz on the memory. At these lower speeds I no longer have any issues with screen tearing, horizontal lines, or random crashing. I do still have a few wierd pixels here and there, but they are not all that noticeable and I can live with them.
Now for the fun part. I wanted to permanently fix these speeds into my GPU so when I boot back to Mac OS X, I don't have any issues, and I no longer have to boost fan speeds or run any additional apps. I spent most of today taking apart my iMac, putting DOS on a spare SATA hard drive, and running an external monitor while booting my iMac with the spare drive hanging out the side. All this so I can run ATIflash, and use it to dump an image of the GPU BIOS ROM file.
Well, I ended up finding out the ATI GPU has no ROM to flash. My best guess is open firmware or something like that passes this data on to the GPU when the system boots.
So, in my case slowing the GPU down significantly reduced my problems while running within windows. I am 100% confident slowing the GPU down will also improve issues within Mac OS X, but I have no way to pull this off.
If Apple reads this, or if anyone has any connections at Apple, can we please get an optional firmware update to reduce the speeds of the X1600 GPU? It won't fix all the iMacs with these issues, but it will fix quite a few, and for those out there who don't have any issues at all with their white C2D iMacs, lowering the GPU speeds will most likely prevent damage from inevitably occurring, keeping them a happy customer.
Now, some of you may not like the idea of a slower GPU, but if I have to pick between a slower GPU and an $800 logic board, I will take the slower GPU any day.There is a little easier Way to Navigate in Doing an F.D.R. than that Method: I listed it here if you prefer going this Route..
2. Re: FACTORY RESET FOR RAZR AN RAZR MAXX -
I have a brand new ipad with iOS 6.1.3 and an imac with OS 10.5.8. I cannot update my OS on this machine, but want to sync the new ipad. What can I do?
If it's an Intel Mac, you can upgrade it to Mac OS X 10.6.8.
If it's a PowerPC Mac, you need to use these instructions and/or iTunes Match to put content on the iPad.
(83068) -
How do I use an external Monitor to access files on my iMac with a broken screen?
I have an 20 inch desktop iMac with a broken screen. It is the files on the computer that I wish to recover, after that, I can be on my merry way. Unfortunately, VileVault was on (Not my choice), and for some reason, when I target the disc image of the broken mac with a new one, ONE of the accounts "appears" to be completely empty. All of the accouts were running FileVault, but only one (mine) failed to be transferred because it is "empty". I refuse to believe that my files are actually all gone, because theoretically there should be nothing wrong with the CPU itself, just the screen.
Thus my goal is to use a monitor on my broken screen iMac and simply log in and access my files normally, and perhaps pull them out with a USB or something. I have a DELL monitor, and a DVI (The big hairy plug with screws I think) converter that works with my old iMac, along with the male/male DVI cord. However, when I hook it up, nothing happens. I have tried booting the old CPU while holding F7, and option as I read on a forum, and neither produced results.
Does anyone have any ideas on how to 1. Get the monitor to simply show what's going on on the mac? or 2. Pull out my files through some other means?
Thank you.If you have a second Mac computer, you may want to try to copy over as many files you can. One way is to use target disk mode.
http://support.apple.com/kb/HT1661
http://lowendmac.com/misc/06/0710.html
You need to follow this procedure to recovering a filevault id. Mac OS X 10.3, 10.4: FileVault - How to verify or repair a home directory image ... http://support.apple.com/kb/HT2631?viewlocale=en_US
Robert
Maybe you are looking for
-
Why can I no longer add photos my iPhoto book? Is there a limit to the number of photos? Must I delete unused photos?
-
Problem with this version of DropDownLists, there is no removeItem function
Dear All, I have a problem with this new version of the DropDownLists, in previous versions you had the removeItem function and others, but now you just have clearItems and addItem. I have a list of elements in which a customer will be able to link a
-
CC apps showing in CC but not Applications?
Hi, I downloaded CC and all programmes were working apart from Illustrator - whenever I opened a file it would think about opening it then suddenly force quit. I uninstalled CC and reinstalled it. Once my CC was installed, my programmes showed up in
-
NFS and LDAP on different servers: Problems with location of home director
Dear Apple Experts. We are using LDAP server for user authentification and NFS server for home directories. Both are decictaed servers on differnt machines. on the NFS server there are directories /home/urpi for staff's home directories and /home/stu
-
Playlists, not checked on iTunes, showing up on iPhone after installing IOS 7.2
My playists, which are not checked, are being synced to my iPhone. I can't figure out how to delete from phone as I do not want them on my iPhone. One playlist has been synced up to my phone but one has not. How do I get rid of the playlist on my