HT1338 install linux OS on Mac mini with USB flash

I have Mac Mini (2005) with RAM 1 Gb, HDD ATA 160Gb (Upgrade new hard disk). Now, i want install linux os on Mac mini with USB flash, but can't do it.
I not yet user MAC os, before (i only use iphone and ipad). :d
Help me do it!
Thanks

Thanks answer,
But not problem.
1. I use Rufus_v1.2.0 create usb boot with file iso. Insert USB to Mac, i startup my Mac mini...screen display gray color with icon folder change 'icon mac os and icon question (?)'.I think Mac mini unknown OS on hard disk (because new hard disk).
2. Don't first boot from USB flash (another devices, i can set up 'boot property' on bios, or press any key to load menu boot). On Mac mini, i don't known(i search internet i try press key 'c', but not run)
:d

Similar Messages

Connect an amplifier (Rotel RA 12) to the mac mini with USB plug?

Is it possible to connect the mac mini with an amplifier via usb?

Hillbille
I have a Mac Mini and a Rotel RA12. As you have found out, you can use the optical out from the 3.5 mm output jack to act as an optical input on the RA12.   This option works fairly well to give you a pretty clean sound. However, there are other options available to you.
One option is to use the headphone out as an analog signal using a tradtional 3.5 mm to RCA (split) cable, and running it to the analog inputs on the back of the RA12. This will provide sound, but not quite up to the quality you will be getting using the optical out. The reason being that the music signal is being processed by the internal DAC on the Mac instead of the better DAC in the Rotel. The other obvious reason is the quality of cable is typically not up to snuff using that route (although, you can get some high end 3.5 mm to RCA cables).
Another option would be to use USB output from the Mac Mini and hooking it up to the USB input on the front of the RA12. This is how I play music from my iPad mini through my Rotel and it works well. Again, however, you are using the DAC of the Mac equipment instead of the Rotel and are limited as to what type of fileyou can play. For example, you can't play FLAC or 24 bit 88kHz files.
A third option, as someone already mentioned, is to get a USB/SPDIF converter, then run a COAX cable to the back of the Rotel RA12. Depending on the quality of the converter, this is your BEST option for audio quality.   Using something like an M2Tech Hiface 2 converter will provide a high quality, jitter free signal between the Mac and the RA12.
Within that third option are two "sub-options" for music playback. You can use iTunes to play back the music through the USB/SPDIF converter directly, or you can use a third party application that will bypass the volume control of the MAC to give you a much purer signal. An example would be Amarra or Audirvana.
If you choose to use iTunes only, the sound will still be "okay", but you will not be able to play FLAC files or SACD ISO files.   You also won't have much control over the signal processing.   Either of thrid part applications I mentioned will give you the option to play other audiophile grade files, and give you a far better sonic experience compared to iTunes, and they can also be integrated with your iTunes library. They will also allow you to utilize Direct Integer mode, upsampling, etc ... so that you can have a 44.1kHz file upsample to 192kHz at the Rotel, or have it upsampled to 192kHz in the Mac (using the 3rd party software) before it is sent out to the Rotel. It just give you much more control over the signal.
The last option option above will give you an audiophile grade signal that will allow your Mac Mini to be used with very high end audio equipment with no comprise to the sound. It will rival the very best of CD or SACD players on the market. It also sounds incredible and you can use it in conjuction with the Apple remote app to control your music through an iPad.

Can't install Snow Leopard on Mac Mini with 10.5.8.

I'm trying to install an upgrade copy of Snow Leopard from Apple on my Mac Mini running 10.5.8. I bought this system used and the volume says ";" and the error log code is 21. Seems it can't find valid softward ID to continue or the path is different. Not sure where to go with this.

If your mini meets the specifications for Snow Leopard (an intel processor and 1GB or more of memory)
then go here to buy snow leopard
http://store.apple.com/us/product/MC573Z/A
It's possible that the upgrade disk you have is specific to particular Mac models.

Install snow leopard on mac mini with broken DVD Drive

I want to upgrade the OS on my mac mini but the hard drive keeps kicking out the disk - I read that I "might" be able to fix this by using a DVD cleaner but I am not overly optimistic about this fix. I have an external USB drive and a Windows PC to work with so I am wondering if I can use the DVD drive of the PC to copy the install disks to the external drive and then perform the instal from the external drive. I have been reading posts and can find advice on how to copy the Leopard install discs using another Mac or by using the remote disk feature - but since I don't have another Mac, these are not currently options.
Thanks

1. Clean your drive and reset the > PRAM, then try upgrading with the Mac Mini's drive.
2. Try out that external USB DVD drive, some will work if they are not OS X compatible.
3. Your PC might work, see > DVD or CD sharing: Using Remote Disc

Installing to 64-bit Mac Mini with 32-bit EFI

It's the Macmini 2,1/A1176 (http://www.everymac.com/systems/apple/m … specs.html).
Is this possible? Installs fine from an ArchBang live CD built without UEFI, just can't get it to boot. I only get the blinking question-mark-folder icon. I've tried:
- rEFInd with 32 and 64-bit binaries (copied to /boot/efi/boot.efi)
- gummiboot installed normally via the guide
- GRUB2 using both i386 and x64 targets
I know there's got to be something special I'm missing, right?

Sorry for the confusion. I was booting to the ArchBang live CD in attempts to get my installed Arch system (201505) booting properly -- just a little easier since I can use Firefox to read some documentation.
Anyway, I'm totally stuck at getting the bootloader working. The UEFI wiki article clearly states that the bitness of the EFI and system must match to get UEFI variable support, and to presumably "bless" the proper EFI binary. So I can't use UEFI to boot, that's fine, the Arch install disc booted in BIOS mode anyway. I've tried both MBR and GPT partitioning, both just result in the blinking folder.

Cannot install windows 7 on brand new mac mini with 256 g sdd? Please help.

Cannot install windows 7 on brand new mac mini with 256 g sdd? Please help.
Have tried all tricks found on the net and followed every advice from apple support.
Still black screen with blinking curser when mini is rebooting following partitioning via bootcamp.
Very nice and fast mashine, wouldnt like to return it.
thanks allan

Is that an Apple SSD?
what model is it?
Is there a firmware update if non Apple?
Lion is not server version.
Windows is ? ISO or retail?
Google macmini Windows 7 SSD Apple Boot Camp

I have two computers. my laptop has os 10.6.8. my mac mini has 10.5.8, hence no app store. can i buy lion on my laptop and then burn a dvd of it and install it on my mac mini or does it have to be installed on the same computer it is bought with?

i have two computers. my laptop has os 10.6.8. my mac mini has 10.5.8, hence no app store. can i buy lion on my laptop and then burn a dvd of it and install it on my mac mini or does it have to be installed on the same computer it is bought with?

You can do it. This article from Macworld will be helpful to you:
http://www.macworld.com/article/161087/2011/07/install_lion_over_leopard.html
I recommend the "brute-force" method.
Just make sure you have your data backed up properly!

Mac mini with 10.6 installed - dual boot 10.8?

Hi all
I have an a Mac mini with 10.6.8 installed (think it came with 10.5) and would like to buy Mountain Lion from the Apple Store and install it as a dual boot setup. I think the hardware is too old for 10.10 (although it does give me the option to download it from the App store). I would like to keep my existing install and install 10.8 either alongside 10.6 or on a separate partition. Couple of questions;
Can I shrink the partition that contains my existing 10.6 install (there is plenty of space on the disk), create another partition and install 10.8 onto it?
Failing that can I install 10.8 alongside 10.6 on the same partition (like we used to do for OS9 and OSX)?
For 10.8 I will be receiving a "content code" for the Mac App Store - once I download the files and start the install presumably the Mac will restart and I will get access to the usual install utilities (without the OS running)?
Many thanks for any help.

If your computer will run Mountain Lion, it will run Yosemite.
1. Yes.
2. I would go with 2 partitions.
Yes.
Check that your computer is compatible with Mountain Lion/Mavericks/Yosemite.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
Mac mini (Early 2009 or newer) model number 3,1 or higher
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
8 GB or more of available space
Check to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.
Application Compatibility
Applications Compatibility (2)
Do a backup before installing.

Drivers won't work on windows 7 when i installed it on my my mac mini with os x lion

have installed windows 7 using boot camp on my mac mini with os x lion on it. But when i loaded windows 7 up it was working fine but then windows 7 wouldn't connect to wifi. It says i have to install drivers but i don't know how to.

First, hold the X key while your Mac is starting to start in OS X. Then, open Boot Camp Assistant (in /Applications/Utilities), follow the steps and mark the option to download the Windows support software. It will be downloaded onto a USB drive or DVD.
Finally, start in Windows, access to the DVD or USB drive through Windows Explorer and run the installer. When the Windows support software is installed, restart

Hi Guys, I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader, What is the problem here so I can get Pictures onto my Computer. ,

Hi Guys,
I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader,
What is the problem here so I can get Pictures onto my Computer. ,

Hi Noob Søren
There are a few things that are confusing in your question.
As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
Hope this helps
WN

Hi, I have tried repetedly to install flash player on my mac mini with no luck..... help please !

Hi, I have tried repetedly to install flash player on my mac mini with no luck..... help please !

How to perform a "clean install" of Flash Player in Mac OS X

I recently purchased new Mac Mini with Lion installed. Now I can't get iTunes to sync iCal from my iPod Touch (3rd gen) to my Mini.

I recently purchased a new Mac Mini with Lion installed. I downloaded the latest version of iTunes. Now I can't get iTunes to sync iCal from my iPod Touch (3rd gen) to my Mini. Everything else syncs great, and iCal syncs from my Mini to my Touch. My Touch has the latest iOS installed. I have tried rebooting my Touch, removing the sync calendars option from iTunes>Info and checking it again after applying and closing iTunes, and restarting my Mini. Any help will be appreciated!

Ongoing thread with the same question https://discussions.apple.com/thread/3209335?tstart=0
Stefan

Can someone tell me how to install webcam isight A1023 on my mac mini with OS 10.8

Please help me to install my webcam isight A1023 on my mac mini with OS 10.8

All you need do is follow the instructions in the iSight User Guide (Manual) that came with your old external iSight.
Neither your system info nor your post identify which Mac mini you use. If your mini is a newer model that has only a Firewire 800 port, and, if you don't already have one that works, you will need a FW400-800 adapter or cable.
Be aware of Possible Conflicts with Firewire iSight. If you encounter such problems with your mini system and cannot resolve them, you can workaround the Firewire issues by using a Mac compatible USB external camera.
Message was edited by: EZ Jim
Mac OSX 10.8.5

HT1338 I have a mac mini with an intel i7 quad processor running on Mac OS 10.9. My audio output stopped working all of a sudden, even though the volume is on maximum and un-muted. How do Iget it to start working?

I just purchased a mac mini with an intel i7 quad processor running on mac OS 10.9.
While listening to a music video on You Tube the audio stopped working.
How do I get it to work?

See: https://discussions.apple.com/message/25486455#25486455

Trying to install Windows 7 on Mac Mini Mid2011

Am trying to install Windows 7 on Mac Mini (Mid 2011) OS X Mountian Lion (10.8.2) - 2.3GHz/i5/4GB/500GB with external optical drive attached. Using Windows 7 Ultimate (on USB Flash Drive) and Windows Support Software (on separate USB Flash Drive), as the external optical drive is not recognized when Boot Camp restarts to begin installation process. Here are some issues I am having:
Going through BCA, when selecting the new partition to install on (Disk 0 Partition 4 BOOTCAMP), the warning of "cannot be installed...", so I select Drive Options (advanced)/Format. Drive is reformatted to the NTSF, but loses the BOOTCAMP name. (Reformats to UNTITLED);
Installation of Windows 7 proceeds, until after its third restart and the color bar with the light burst at its center appears at the bottom of the screen with messages stating "Preparing....". The computer then reboots and starts this endless boot loop.
As it never gets to the part where the Windows Support Software is engaged, can I have both the Windows 7 Ultimate installation and the WSS on the same USB?
I have been researching this issue, but with no difinitive solutions (other than snarky "You obviously didn't read the prior post for this issue..." & "Don't people READ previous posts?" responses.), other than one rude reply saying this was a known issues and there is a fix/driver for it, but no reference as to where this fix resides.
Please if anyone has a solution, I would be very grateful for serious and considerate answers. If you feel the need to be rude/snarky/downright unhelpful, don't reply. This is a community help page, not your venting page.
Thank you in advance for all serious replies.
JAMinard

Right now I have 6 different systems installed. Windows XP, 7, and 8 plus Linux Mint, Commodore, and OS X Snow Leopard (for old times sake), all running on Mountain Lion.
I recommend reading the user manual as it greatly helps getting through the steps, however an intuitive person should pick it up fairly easily.
Thanks to BobTheFisherman for the link.
There are other ways to get Windows on a Mac but I'm a big fan of open-source software.
Give it a try. You might like it or it may not be your cup of tea.

HT1338 install linux OS on Mac mini with USB flash

Similar Messages

Maybe you are looking for