HT1338 Is there any way to get OS X Mountain Lion on my version 10.5.8 MacBook?

I have an older MacBook, and a brand new iPhone 5c. I am having problems syncing them because I cannot download the new iTunes because my software is too old. Somebody help!

Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion — System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

Similar Messages

TS2529 I had backed-up my iPhone and when I try to restore it it says that the back-up is corrupt or the iPhone is not compatible. I had a bunch of pictures that I need from that restore. Is there any way to get them back? I did the back-up to my Macbook

I had backed-up my iPhone and when I try to restore it it says that the back-up is corrupt or the iPhone is not compatible. I had a bunch of pictures that I need from that restore. Is there any way to get them back? I did the back-up to my Macbook

If the backup is corrupt, there is nothing that can be done.
For what reason did you choose to not copy the pictures off the device to a computer prior to attemping an update or whatever caused the need to restore? iPhones are not intended as sole storage of any media.

Is there a way to get rid of Mountain Lion and return to Snow Leopard?

Eversince apple replaced my hard drive due to a recall and I installed mountain lion because it was touted as the greatest, i have been greatly disappointed. My system has slowed to a crawl, and there's just too much going on. I don't see the benefit and feel ripped off.
Is there a way to remove mountain lion and replace with my old system, Snow Leopard?

macnally wrote:
Eversince apple replaced my hard drive due to a recall and I installed mountain lion because it was touted as the greatest, i have been greatly disappointed. My system has slowed to a crawl, and there's just too much going on. I don't see the benefit and feel ripped off.
Is there a way to remove mountain lion and replace with my old system, Snow Leopard?
Restore your backup. (The one you made prior to replacing the operating system)

Is there any way to get the height/width of an image before importing it in the indesign document.

Hi All,
I need to obtain an image's attributes such as dimensions (height, width in pixels) without placing image in indesign document.
I have full path of the image (say abc.jpg is stored at c:\my pic\abc.jpg).
I have obtained the IDFile for this image, tried getting size using GetFileSize() which correctly return size in bytes.
Is there any way to get the height/width of image without importing it in the indesign document.
Please, give me some hints. I have spent quite a lot time digging in CHM. I have searched in FileUtils, IDFile API's but found no method which serves this purpose.
At this point I am clueless where to search next.
Any help will be appriciated.
Just a point to mention, I am able to get image height and width for an image in indesign doc though Its not my requirement.
Thnx,
D.

You might be able to examine the contents of the PlaceGun after calling kImportAndLoadPlaceGunCmdBoss without actually placing the image in a document. Not sure, but would be worth looking at.
Otherwise you will probably have to write platform specific code, ideally with a generic platform-independant wrapper (see SDKSamples/paneltreeview/PlatformFileSystemIterator).
For the Mac, look at CGImageGetWidth() etc., not sure what the best option is for windows.
Perhaps Quicktime could provide you with a platform independant solution.

Is there any way to get the appStore link for my application

Hi everyone , i am developing an app which has a feature of sharing its appstore link with the friends through mail,so that they can see my appplication in appstore and buy it directly on click of a button. For that i need to use the app store link of my application for sending it . is there any way to get that and using it dynamically in my app immediately after releasing it.

Your best bet would be to create a web page of your own for the app. Design that page so that it uses 'META REFRESH' to redirect the visitor straight to the App Store link.
That way you can hard-wire your own web page address into your app.
This has the advantage that it can work well even before you've noticed that your app has arrived on the App Store. Create a real web page, describing the app and telling people to search for it in the App Store by name - then replace it with the auto-redirect page when you've discovered your application's App Store address.

HT1386 i am trying to restore a backup og my iphone 4 from itunes on my macbook, it asks me for a password which i do not recall setting up, is there any way of getting this password.

i am trying to restore a backup og my iphone 4 from itunes on my macbook, it asks me for a password which i do not recall setting up, is there any way of getting this password.

No there's not. Otherwise that wouldn't be very secure, would it?

I had 41 tabs open in about six groups over the last year and a half and I just close them and exited Firefox. Is there any way to get them back?

<blockquote>Locking duplicate thread. 
Please continue here: [[/questions/856718]]</blockquote>
I had 41 tabs open in about six groups over the last year and a half and I just close them and exited Firefox. Is there any way to get them back?
Also, is there any way to save a group or an open session and then restore it later?

History menu, if it was destroyed in the last session
then use "Restore Previous session:" and then restore all windows also from the history menu.
If done in this session try the restore all windows under the history menu.

Federal court website gives a .pl document which opens as garbage until we manually change it to .pdf, is there any way to get Firefox to do this automatically?

I am using a Mac. When downloading a document from the federal court website using Firefox, we get a .pl document which opens as garbage (in TextEdit) until we manually change it to .pdf, which causes it to open just fine (in Preview). It used to work fine, giving a .pdf document every time, but apparently upgrades to Firefox have removed this functionality. As far as I can tell my computer, an iMac running Mac system OS X 10.10.1, does not recognize the .pl format. Is there any way to get Firefox to automatically convert a downloaded file from .pl format to .pdf format? My friend tells me that Google Chrome downloads these documents with no problem. I would prefer to stick with Firefox but I might have to change if every downloaded document is in an unreadable format.
This is a typical example of what I get when I try to open a .pl document (the pdf version is a one page document using plain English):
=====
%PDF-1.5
%‚„œ”
2 0 obj
<</Length1 15628/Length 10121/Filter/FlateDecode>>stream
xúÌ{i`U∂9∑™∫;kWoYÈtuöK“ÑR@“ F!,Å$ñêÑÑd Çä††¢≤)
¢Ääƒet\FeûNà£Œ∆y3"ÈÔ‹Í|Ûæ˜˝˙˛LUNü{œ›Œ=€=∑i

HI jlawrence1,
Is it possible to associated the pl file mimetype with an application? [[Applications panel - Set how Firefox handles different types of files]]

Is there any way to get my photos FROM my iPod Touch back onto a new hard drive?

My Mac crashed last Friday. First timeIs there any way to get my photos FROM my iPod Touch back into my new hard drive. The iTunes sync only goes one way from the computer to the iPod.
It syncs the photos taken with the iPod (really an old iPhone 3G without phone service) but not the folders which I synced from the old hard drive to the iPod over the past year.

thank you for the tip.
Yes, my computer was backed up. for reasons way too complicated to go into here, these particular folders were not part of the backup.
Thanks again for the help.
jglaiche

Itunes deleted my 30 gigs of music and I didn't have it saved in itunes or on computer, is there any way of getting music back?

Itunes deleted 30 gigs of music from my ipod. And I don't or didn't have it saved in Itunes or on my computer....is there any way of getting my music back? Alot of the music was not purchased from Itunes....mostly from cds I dont have anymore! PLEASE HELP!

If the lost music is no longer on your iPod, on your PC, or in another backup somewhere, you are out of luck. You can download most iTunes purchases again at no cost via iCloud. See this article for more information and assistance.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
For non-iTunes purchased content, you'll need to redownload or rerip them from their original source.
B-rock

Is there any way of getting back from a wrong clicked free trial to add my serial number correctly?

Hi
On purchasing a new imac I copied the apps across & on opening CS6 was requested to load serial numbers, through tiredness I added the seria; number from CS5.5 and therefore not recognised for the CS6, then when about to enter again through tiredness I must have clicked free trial and now have the CS6 in that format.
Is there any way of getting back to that initial box to load the correct numbers & get out of trial as although it works I need it set up correctly?
Any help appreciated

Sorry, cant see this visible on menu or drop downs, did run through all menus before posting, could just be tired from 3 weeks straight.
If this is not an option does that mean I am set up ?

Is there any way to get 720x576 (ie DV Pal) from iphoto slideshow?

I have tried the iphoto forum and have been directed here. Is there any way to get 720x576 (ie DV Pal) for an export from iphoto slideshow? I want to export 200+ photos with random transitions and the ken burns effect. Imovie offers offers automatic ken burns effect via project properties but I can't find a way to add random transitions automaticcally. Is it possible? I want to add the exported file to a movie in Final Cut Studio. Normally I have to resort to using adobe photoshop elements 5 and premiere elements 3 on my bootcamp partition. I would love to do this all in Mac OSX - since leaving Windows, this is the only thing that forces me to use that lousy operating system!
Thanks in advance for any help.

I have tried the iphoto forum and have been directed here. Is there any way to get 720x576 (ie DV Pal) for an export from iphoto slideshow?
Not directly. But you can do it with a bit of external help. Create a slideshow project in iPhoto using the "Random" transitions and auto KBE you want. Then export the slideshow as a 640x480 MPEG4/AAC 30 fps full motion MOV file. Drop the file to MPEG Steamclip and select the "Export to DV" File menu option. The select the DV format, PAL standard, and aspect you want. (I would normally select the "Frame Blending" option in the main menu when going from 30 fps to 25 fps.)

Is there any way to get around having to use iDVD to burn DVD?

Is there any way to get around having to use iDVD to export FCE to DVD?
I've been trying to burn a FCE2 sequence to DVD. A friend of mine told me all I had to do was put a blank DVD in, click on the icon on the desk top, export the sequence to Quicktime and drag the QT sequennce into the DVD icon and click burn.
Well something happened! But there's nothing on the DVD!! What am I doing wrong? I loathe iDVD. i don't want to author. I just want to burn the project on a DVD. Please advise. Thanks.
Chuck
iMAC 1.25 GHz PowerPC G4 Mac OS X (10.3.1)
iMAC 1.25 GHz PowerPC G4 Mac OS X (10.3.1)

If you export a sequence at full resolution to can burn it onto a DVD as a data DVD, but this is for transportation purposes only. At full resolution the DVD, especially as it fills up, will not have sufficient throughput to sustain good playback of the material. That's why the material is encoded into MPEG-2 for DVD authoring. If you want to make a DVD for set-top playback it has to be authored to include the DVD format structure. There is no way around that. If you don't like iDVD, take a look at Final Cut Studio, you might prefer DVD Studio Pro. Or you might what to look at Roxio's Toast. It has basic authoring capabilities. Personally I don't think direct playback hardware solutions (except for seriously expensive ones) produce acceptable quality, but that's just me.

Is there any way to get the security tab to show when going to a website as in previous versions of firefox?

Before I updated to Firefox 4, I used to be able to see the security bar on the bottom right telling me whether it was secure (x-d out in red or not) before I logged into a site, purchased something, etc. I know the bottom tab has been brought to the top but I no longer see that bar/icon which bother me. Is there any way to get that security tab (that little gold lock symbol) to show again for every website?

The padlock has been replaced by the site identity button, for details on using it see https://support.mozilla.com/kb/Site+Identity+Button
If you want a padlock, you can use the Padlock add-on in conjunction with the site identity button - https://addons.mozilla.org/firefox/addon/padlock-icon/

When closing multiple tabs, is there any way to get back the option of saving those tabs OR NOT for your next session, within the warning dialogue box itself?

For brief period of time, not in FF4, there was the option whereby when I closed multiple tabs, a firefox dialogue box opened warning me that I'm about to close multiple tabs, '''AND ALSO''' asking me if wanted to save those tabs for my next session, or trash them.
The primary issue IS NOT about saving tabs. The primary question here is about getting THE OPTION back to the CLOSING MULTIPLE TABS WARNING DIALOGUE.
The use case here should be obvious. However, since it is clearly not obvious that different people work in a variety of ways, and neither of those methods of working is "wrong" or "right" I will elaborate: Some people, for whatever reason, it doesn't matter why, want to save all their tabs on some occasions, and on other occasions don't.
This preference varies throughout the day. Therefore it is inefficient to constantly go to preferences and change whether or not I want firefox to open all my tabs from my last session. It is more LOGICAL to place an option in the multiple tab warning dialogue as well, for people whose preference constantly changes.
This option was available for a time in most of the Firefox 3 versions. Is there any way to get back this option in Firefox 4?

Firefox 4 saves the previous session automatically, so there is no need for asking if you want to save the current session.
You can use "Firefox > History > Restore Previous Session" to get the previous session. 
There is also a "Restore Previous Session" button on the default about:home Home page.
You can set the warn prefs on the about:config page to true via the right-click context menu or toggle the value with a double left-click.
* browser.showQuitWarning, see http://blog.zpao.com/post/3174360617/about-that-quit-dialog
* browser.tabs.warnOnClose, see http://kb.mozillazine.org/About%3Aconfig_entries
* browser.warnOnQuit , see http://kb.mozillazine.org/browser.warnOnQuit
* browser.warnOnRestart , see http://kb.mozillazine.org/browser.warnOnRestart
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page.

HT1338 Is there any way to get OS X Mountain Lion on my version 10.5.8 MacBook?

Similar Messages

Maybe you are looking for