HT1338 Meow or Roar ?

I have OS X 10.5.8 Should I upgrade to Snow Leopard before Lion ? or something else ? Thank you !

Unless you're willing to purchase the more expensive USB flash drive and install it onto a blank partition, you must go through Snow Leopard.
(67355)

Similar Messages

My MacAir's fan is roaring.

My MacAir( 2011 dec ) fan is roaring wen heavy apps(Win7 via VMWare) are running. I also have a crystal cover but its well grooved for the heat exhaust.
Does anybody have the same experience ? Upgrading to 8GB RAM will solve it ? Is it possible to upgrade Mac Air RAM ?

My MacAir( 2011 dec ) fan is roaring
You ARE running Lion, aren't you?
Does anybody have the same experience ?
No. Never noticed that on my MacBook Air. Try removing it from the case temporarily just to see if you notice a difference.

IMac G5 - hang on start-up with roaring fans

Hi all
Problem occured after trying to instal CD that came with WD-external hard disk 250Gb.
My friends iMac G5 will not cont when starting-up after showing the Apple.
• Showing Apple and moving it slightly down with a jump (less than 1cm)
• No rotating wheel-pinns ???
• Roaring fans
• No progress (at least for 20 min)
Starting from an external hard disk. Keeping alt down during start-up. Works nicely.
Selecting it as start disk - works OK
Running:
• Repair performances - (Apple Disk Util tool) - no effect
• Repair hard disk - (Apple Disk Util tool) - no effect
• DiskWarrior™ - no effect
• TechTools - no effect
What can have happened to the internal hard disk. All files are there and can be use via external
hard disk.
Track zero - error ?
Yours in need of help. Bengt W

Which "model" & "generation" G5 iMac does your friend have?
Need this info so that the knowledgeable users can provide you/friend with the proper troubleshooting solution(s).
http://docs.info.apple.com/article.html?artnum=301724-en How to identify your iMac
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh355.html Getting information about your computer
You can have this info displayed on the bottom of every post by going to 'My Settings' which is located in the column on the right under your name, and filling in the information asked for.
Thank you
In the meantime, see the following Knowledge Base Articles:
http://docs.info.apple.com/article.html?artnum=301287 My computer stops responding during startup
http://docs.info.apple.com/article.html?artnum=301733 iMac G5: How to Reset the SMU (iMac G5, the iMac G5 (Ambient Light Sensor), and the iMac G5 (iSight)).

Mini Mac, no light, and roaring fan!

Hi chaps please could you advise on my mini mac prob,
Basically unit was completely switched off for a couple of days, when switched on it booted up to a white screen with the apple logo and spinning timer which kept locking up.
I did a PMU which got me functioning properly (seems to be) but has left me with no indicator light and the fan keeps roaring away at an exaggerated speed.
thx for your time( I have rebooted/restated/shutdown several times but no different
cheers jeff, wales uk

click on the  icon in the left upper menu bar. select +about this Mac+. click on +more info+. copy and paste this information in your next post:
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro3,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 4 GB
Bus Speed: 800 MHz
Boot ROM Version: MBP31.0070.B07
SMC Version (system): 1.16f11
let's see what you baby is made of before we continue
JGG

Roar mini speaker won't pair with Samsung S tablet

My HP Roar Mini wireless gives me an error code when I try to pair with new Samsung S Tab...invalid PIN or Password.How to I get it to connect?

Hello, and Welcome to the HP Support Community! According to the Setup Guide for the speaker, it powers up in pairing mode: "Press to turn the speaker on and off. If the speaker is charging, the light is solid amber. If the battery is fully charged, the light is off when the speaker is turned off, solid white when the speaker is turned on and paired, and blinking white when the speaker is turned on and pairing. The speaker starts in pairing mode and automatically attempts to connect to previously paired Bluetooth devices." I saw nothing about a pairing code. Is BlueTooth turned on in your tablet, and have you pressed "Scan"? WyreNut

HT1338 I can't update my mac? Why?

Every time I check for an update, it always said that there's no update. It's been a long time. I just didn't get to it. I now can't sync my Ipod to my mac, I can't install new apps on my mac because of it. Help!

The Mac App Store, which is referred to by the knowledgebase article HT1338 that this subject line is about did not become available until Mac OS X 10.6.6.
If you have 10.6.8, 10.7.5, 10.8.5, or 10.9.2 and have applied all the security updates to date, you likely are the end of the line of updates for your system for free updates.
Security updates are outlined here:
http://support.apple.com/kb/HT1222
You can take the name of the security update in question, and google
name of update support.apple.com DL
And get the direct download link for the said update, if you are uncertain if you have the latest security update for your operating system. If you want to update to the next stage of Mac OS X,
from 10.6.x to 10.7
from 10.6.x to 10.8
from 10.6.x to 10.9
from 10.7.x to 10.8
from 10.7.x to 10.9
from 10.8.x to 10.9
Check the links on these tips before updating:
https://discussions.apple.com/docs/DOC-6271
https://discussions.apple.com/docs/DOC-2465
https://discussions.apple.com/docs/DOC-3761
https://discussions.apple.com/docs/DOC-6131
As you may need to take extra steps to ensure compatibility.

Need help with new SoundBlaster ROAR SR20 or it goes to the trash. [Bluetooth]

Hey Guys, I just recently purchased a the Sound Blaster ROAR SR20 and even after 2 days of owning it and countless searches for help, I've come to no conclusion of why i cant get my laptop to recognize it [Bluetooth] and allow me to download any drivers for it. I have tried Connecting it VIA USB 3.0 whereas the drivers said they were successfully installed [and it works over USB] but when i attempt to re-connect via Bluetooth it shows that 3 separate Bluetooth Peripheral Device Drivers are needed and not installed. I am currently running Windows 7 (64x) Professional and have tried already using this method but with no luck.
http://support.microsoft.com/kb/2654568
Attached [hopefully] is a image/screenshot file of the drivers it is showing errors for.
http://i.imgur.com/6xn9NjV.png
Hope to hear back from you all soon,
Will Champion

Originally Posted by Colin-CL
Hi Will,
Please confirm that your laptop supports the following Bluetooth profiles:
Supported Bluetooth Profile
- A2DP (Wireless Stereo Bluetooth),
- AVRCP (Bluetooth Remote Control),
- HFP (Hands-Free profile)
If you have access to another Bluetooth speaker, you can try to connect it to see if you are still facing the same issue. What we like to do here is to narrow down where the potential cause of the issue is.
Another option is to use this bluetooth transmitter with your laptop. Let me know how it goes and I can make further suggestions based on the outcome.
Cheers,
Colin-CL
Ok so i purchased a aptX enabled dongle, installed the drivers from a mini CD, and now when i connect using the CSR 4.0 Bluetooth driver that now shows up on my taskbar, a pop up displays saying that Im now connected to an aptX enabled device.
Now my problem is that under properties (when selected for playback) i notice that now my advanced settings are drastically...well...crappier. Meaning that the Default Format sampling rate is Locked at 1 Channel, 16 bit, 8000Hz which is telephone quality, and it sounds like telephone quality.
However when connect using my built in Bluetooth adapter my Default Format sampling rate is 2 Channel, 16 bit, 44100Hz which is CD quality and i have the option only one other selection....2 Channel, 16 bit, 48000Hz which is DVD quality.
One would think that the so called legendary aptX codec would allow for a higher sample rate so I am wondering if this is user error or perhaps i have an outdated driver (a problem since CSR updates/drivers are no where to be found on the internet)
Im Hoping that maybe you can help me resolve this issue since Ive hopefully narrow down the list of possible errors
Hope to hear back from someone soon
Thanks,
-Will Champion
USB Info: Supertech USB Bluetooth 4.0 Low Energy Micro Adapter with CSR8510 controller and CSR Harmony
http://www.amazon.com/gp/product/B00HQE4MRU/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

HT1338 What do iPad users use if they do not have the apple icon??

Hi,
I'm trying to get Java onto my iPad, on looking at the following site, it suggests clicking the apple icon at the top of a mac? But I don't have a mac I have an iPad, so how do I do it?
http://support.apple.com/kb/HT1338?viewlocale=en_US
Thank you, in anticipation
Martin

Welcome to Apple Support Communities.
Java is not directly available to install on iOS, the operating system for the iPad.
I'm not sure just what you're looking for.
Do you need Java enabled to use a specific website, such as an education site?
This browser app claims to have Java capability built-in.
I've not used it, so I cannot vouch for whether it works at all or how well it works.
http://itunes.apple.com/app/office-flash-java-w-chrome/id380204369?mt=8
For future reference, you've posted in the Mac OS X forums. (Yes, Mac does support Java in OS X, but the iPad uses iOS, completely different operating system.)
You'll likely get a faster reply by posting your questions in the iPad forums:
https://discussions.apple.com/community/ipad/using_ipad?view=discussions

Soundblaster ROAR Mac USB Connection Lost After Reboot

I am using the device on my Mac. I currently connect it via USB, but also ran into the problem with Bluetooth. I set up the device for sound in System Preferences and everything works correctly. However, if I reboot the computer, the Mac is not seeing the device and won't reconnect via USB. I have to go back hit the Play/Pause button to connect it again via USB.
This is obviously frustrating. Is there a way to solve this problem? My Mac is running Yosemite 10.10.2.
Thanks for any suggestions!

Hi jwt0001,
As with any electronic devices, especially those with built-in batteries, leaving them connected to your PC or electrical socket that is always turned is not good for your battery. Although batteries these days have special circuitry to cut power off once it has reached its full charge, such practice can diminish your battery's lifespan/charging cycle. If your Sound Blaster Roar is connected to your PC and it is occasionally switched off from time to time, this should not be a huge problem.
It is a normal behavior for Bluetooth devices to take a second or two to wake up when audio begins since it needs to re-connect to its last paired connection. I've yet to observe this when connected via USB.
Personally, I pair my Roar to my phone via Bluetooth; I usually turn on the speaker, turn on Bluetooth to connect and start playing music. It does take a couple seconds to do this each time but is not so much of a hiccup for me.
Cheers,
Colin-CL

I am considering updating to Mountain Lion. Have checked the website Roar for compatibility with other software; some OK; some have yet to be tested. When will that testing be done?

I am considering updating to Mountain Lion. Have checked the Roar website for compatability with my existing software; some are OK, but Bridge and Picasa said to yet be tested for compatability. When will this happen?

I am considering updating to Mountain Lion. Have checked the Roar website for compatability with my existing software; some are OK, but Bridge and Picasa said to yet be tested for compatability. When will this happen?

Mac Pro has died - it powers on but fans roar, screen stays black.

I had just woken my Mac Pro from sleeping overnight. It's running 10.4.8.
I open the boot hard disk in column view. I click the Applications folder to expand it into the next column.
The desktop disappears to be replaced by an all over blue raster. After a minute, that little grey rotating sun "wait" symbol you normally only see during start up, appears in the centre of the screen. I have no menubar or cursor.
I have been staring at this situation for five minutes now. I have never seen a Mac behave like this before.
I suppose the only option is to hold the power button in until the thing shuts down.
I shut it down with the power button. Powering up again, the fans roar, the screen remains dark, and that's the way it stays. No boot.
The only thing changed recently was the installation, yesterday, of the latest EFI Firmware Update v1.1.
I feel that this update has broken the computer. What are my options now?

Here's a copy of the relevent part of the log. I can't deduce what went wrong.
Dec 31 15:16:55 macpro kernel[0]: Intel8254x -- Link down -- 00:17:f2:00:39:8e -- called by disable() --
Dec 31 15:16:55 macpro kernel[0]: -- Auto-Neg Advertise Reg (04d) = 0xde1, Link Partner Ability Reg (05d) = 0xcde1, Gig Advertise Reg (09d) = 0xe00, Gig Link Partner Ability Reg (10d) = 0x7c00
Dec 31 15:16:55 macpro kernel[0]: Intel8254x -- Link down -- 00:17:f2:00:39:8f -- called by disable() --
Dec 31 15:16:55 macpro kernel[0]: -- Auto-Neg Advertise Reg (04d) = 0xde1, Link Partner Ability Reg (05d) = 0x0, Gig Advertise Reg (09d) = 0xe00, Gig Link Partner Ability Reg (10d) = 0x4000
Dec 31 15:16:58 macpro configd[75]: posting notification com.apple.system.config.network_change
Jan 1 10:12:26 macpro kernel[0]: System Sleep
Jan 1 10:12:26 macpro kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Jan 1 10:12:26 macpro kernel[0]: Started CPU 01
Jan 1 10:12:26 macpro kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Jan 1 10:12:26 macpro kernel[0]: Started CPU 02
Jan 1 10:12:26 macpro kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Jan 1 10:12:26 macpro kernel[0]: Started CPU 03
Jan 1 10:12:26 macpro kernel[0]: IOBluetoothHCIController::restartShutdownWL this is a wake from sleep
Jan 1 10:12:26 macpro kernel[0]: System Wake
Jan 1 10:12:26 macpro kernel[0]: USB caused wake event (EHCI)
Jan 1 10:12:29 macpro kernel[0]: Intel8254x -- Link Up -- 00:17:f2:00:39:8e -- called by interruptOccurred() --
Jan 1 10:12:29 macpro kernel[0]: -- Auto-Neg Advertise Reg (04d) = 0xde1, Link Partner Ability Reg (05d) = 0xcde1, Gig Advertise Reg (09d) = 0xe00, Gig Link Partner Ability Reg (10d) = 0x7c00
Jan 1 10:12:31 macpro kernel[0]: Intel8254x -- Link down -- 00:17:f2:00:39:8f -- called by enableHardware() --
Jan 1 10:12:31 macpro configd[75]: posting notification com.apple.system.config.network_change
Jan 1 10:12:31 macpro kernel[0]: -- Auto-Neg Advertise Reg (04d) = 0xde1, Link Partner Ability Reg (05d) = 0x0, Gig Advertise Reg (09d) = 0xe00, Gig Link Partner Ability Reg (10d) = 0x4000
Jan 1 10:12:31 macpro lookupd[383]: lookupd (version 369.6) starting - Mon Jan 1 10:12:31 2007
Jan 1 10:12:36 macpro mDNSResponder: NOTE: Wide-Area Service Discovery disabled to avoid crashing defective DNS relay 192.168.1.254.
Jan 1 10:13:12 macpro /System/Library/CoreServices/mcxd.app/Contents/MacOS/mcxd: mcxd [387] Giving up waiting for mcxd process 386 to quit after waiting 30 seconds
Jan 1 10:13:14 macpro crashdump[389]: loginwindow crashed
Jan 1 10:13:14 macpro /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer: kCGErrorInvalidConnection : CGSGetNextEventRecord: Invalid connection
Jan 1 10:13:14 macpro /Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/MacOS/iTu nesHelper: kCGErrorInvalidConnection : CGSGetNextEventRecord: Invalid connection
Jan 1 10:13:14 macpro /Applications/TechTool Pro 4.app/Contents/SharedServices/0-StartupInit.service/Contents/Frameworks/TechToo lProtection.app/Contents/MacOS/TechToolProtection: kCGErrorInvalidConnection : CGSGetNextEventRecord: Invalid connection
Jan 1 10:13:14 macpro /Applications/Utilities/StuffIt 11/MagicMenu.app/Contents/MacOS/MagicMenu: kCGErrorInvalidConnection : CGSGetNextEventRecord: Invalid connection
Jan 1 10:13:14 macpro /Library/Application Support/Logitech/LCCDaemon.app/Contents/MacOS/LCCDaemon: kCGErrorInvalidConnection : CGSGetNextEventRecord: Invalid connection
Jan 1 10:40:51 localhost kernel[0]: hi mem tramps at 0xffe00000
Jan 1 10:40:51 localhost kernel[0]: PAE enabled
Jan 1 10:40:51 localhost kernel[0]: 64 bit mode enabled
Jan 1 10:40:51 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jan 1 10:40:51 localhost kernel[0]: vmpagebootstrap: 973215 free pages
Jan 1 10:40:51 localhost kernel[0]: migtable_maxdispl = 71
Jan 1 10:40:51 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Jan 1 10:40:52 localhost kernel[0]: 87 prelinked modules
Jan 1 10:40:52 localhost kernel[0]: ACPI CA 20060421
Jan 1 10:40:52 localhost kernel[0]: AppleIntelCPUPowerManagement: ready
Jan 1 10:40:52 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Jan 1 10:40:52 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
Jan 1 10:40:52 localhost kernel[0]: AppleACPICPU: ProcessorApicId=2 LocalApicId=7 Enabled
Jan 1 10:40:52 localhost kernel[0]: AppleACPICPU: ProcessorApicId=3 LocalApicId=6 Enabled
Jan 1 10:40:52 localhost kernel[0]: AppleACPICPU: ProcessorApicId=4 LocalApicId=0 Disabled
Jan 1 10:40:52 localhost kernel[0]: AppleACPICPU: ProcessorApicId=5 LocalApicId=0 Disabled
Jan 1 10:40:52 localhost kernel[0]: AppleACPICPU: ProcessorApicId=6 LocalApicId=0 Disabled
Jan 1 10:40:52 localhost kernel[0]: AppleACPICPU: ProcessorApicId=7 LocalApicId=0 Disabled
Jan 1 10:40:52 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Jan 1 10:40:52 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Jan 1 10:40:52 localhost kernel[0]: using 16384 buffer headers and 4096 cluster IO buffer headers
Jan 1 10:40:52 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Jan 1 10:40:52 localhost kernel[0]: Started CPU 01
Jan 1 10:40:52 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Jan 1 10:40:52 localhost kernel[0]: Started CPU 02
Jan 1 10:40:52 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Jan 1 10:40:52 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Jan 1 10:40:52 localhost kernel[0]: Started CPU 03
Jan 1 10:40:52 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Jan 1 10:40:52 localhost kernel[0]: Security auditing service present
Jan 1 10:40:52 localhost kernel[0]: BSM auditing present
Jan 1 10:40:52 localhost kernel[0]: disabled
Jan 1 10:40:52 localhost kernel[0]: rooting via boot-uuid from /chosen: D0D041A1-934C-43A6-9F40-9FD36B407BC9
Jan 1 10:40:52 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Jan 1 10:40:52 localhost kernel[0]: USB caused wake event (EHCI)
Jan 1 10:40:52 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT1 @1/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/Hitachi HDS725050KLA360 Media/IOGUIDPartitionScheme/AppleHFS_Untitled1@2
Jan 1 10:40:52 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
Jan 1 10:40:52 localhost kernel[0]: jnl: replay_journal: from: 32989696 to: 16164864 (joffset 0xe8e000)
Jan 1 10:40:52 localhost kernel[0]: FireWire (OHCI) TI ID 8025 built-in now active, GUID 0016cbfffe6be2d2; max speed s800.
Jan 1 10:40:52 localhost kernel[0]: CSRHIDTransitionDriver::probe:
Jan 1 10:40:52 localhost kernel[0]: CSRHIDTransitionDriver::start before command
Jan 1 10:40:52 localhost kernel[0]: CSRHIDTransitionDriver::stop
Jan 1 10:40:52 localhost kernel[0]: IOBluetoothHCIController::start Idle Timer Stopped
Jan 1 10:40:52 localhost kernel[0]: HFS: Removed 143 orphaned unlinked files
Jan 1 10:40:52 localhost kernel[0]: Jettisoning kernel linker.
Jan 1 10:40:52 localhost kernel[0]: Resetting IOCatalogue.
Jan 1 10:40:52 localhost kernel[0]: Matching service count = 0
Jan 1 10:40:52 localhost kernel[0]: Matching service count = 0
Jan 1 10:40:52 localhost kernel[0]: Matching service count = 0
Jan 1 10:40:52 localhost kernel[0]: Matching service count = 0
Jan 1 10:40:52 localhost kernel[0]: Matching service count = 0
Jan 1 10:40:52 localhost kernel[0]: Matching service count = 0
Jan 1 10:40:52 localhost kernel[0]: wl0: Broadcom BCM4328 802.11 Wireless Controller
Jan 1 10:40:52 localhost kernel[0]: 4.80.46.0Previous Shutdown Cause: 0
Jan 1 10:40:52 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Jan 1 10:40:51 localhost mDNSResponder-108.2 (Aug 25 2006 14: 50:48)[30]: starting
Jan 1 10:40:51 localhost memberd[38]: memberd starting up
Jan 1 10:40:53 localhost lookupd[47]: lookupd (version 369.6) starting - Mon Jan 1 10:40:53 2007
Jan 1 10:40:53 localhost kernel[0]: jnl: replay_journal: from: 171520 to: 558592 (joffset 0x23beda1000)
Jan 1 10:40:53 localhost diskarbitrationd[36]: disk0s2 hfs 38F80FD8-FEAA-32FA-A2F4-0516ED890026 Brenda /
Jan 1 10:40:53 localhost diskarbitrationd[36]: disk1s2 hfs F4D426C5-27DB-3E57-B66F-481250D57EA6 Alice /Volumes/Alice
Jan 1 10:40:53 localhost diskarbitrationd[36]: disk2s2 ntfs 00000000-0000-0000-0000-000000000000 WindowsXP /Volumes/WindowsXP
Jan 1 10:40:53 localhost DirectoryService[48]: Launched version 2.1 (v353.5)
Jan 1 10:40:57 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:17:f2:00:39:8e
Jan 1 10:40:57 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:17:f2:00:39:8f
Jan 1 10:40:57 localhost kernel[0]: AirPort_Brcm43xx: Ethernet address 00:17:f2:95:46:e9
Jan 1 10:40:58 localhost kernel[0]: Registering For 802.11 Events
Jan 1 10:40:58 localhost kernel[0]: [HCIController][setupHardware] AFH Is Supported
Jan 1 10:40:59 localhost mDNSResponder: Adding browse domain local.
Jan 1 10:41:00 localhost kernel[0]: Intel8254x -- Link Up -- 00:17:f2:00:39:8e -- called by interruptOccurred() --
Jan 1 10:41:00 localhost kernel[0]: -- Auto-Neg Advertise Reg (04d) = 0xde1, Link Partner Ability Reg (05d) = 0xcde1, Gig Advertise Reg (09d) = 0xe00, Gig Link Partner Ability Reg (10d) = 0x3c00
Jan 1 10:41:00 localhost lookupd[72]: lookupd (version 369.6) starting - Mon Jan 1 10:41:00 2007
Jan 1 10:41:01 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jan 1 10:41:01 localhost loginwindow[74]: Login Window Started Security Agent
Jan 1 10:41:04 macpro kernel[0]: Intel8254x -- Link down -- 00:17:f2:00:39:8f -- called by enableHardware() --
Jan 1 10:41:04 macpro kernel[0]: -- Auto-Neg Advertise Reg (04d) = 0xde1, Link Partner Ability Reg (05d) = 0x0, Gig Advertise Reg (09d) = 0xe00, Gig Link Partner Ability Reg (10d) = 0x4000
Jan 1 10:41:04 macpro configd[34]: setting hostname to "macpro.local"
aped[67]: TechToolProtecti[104] is running as the super-user. It is not possible for Application Enhancer to affect this process in any manner whatsoever.
Jan 1 10:41:07 macpro configd[34]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Jan 1 10:41:07 macpro configd[34]: posting notification com.apple.system.config.network_change
Jan 1 10:41:07 macpro lookupd[108]: lookupd (version 369.6) starting - Mon Jan 1 10:41:07 2007
Jan 1 10:41:09 macpro kernel[0]: (90: aped)tfp: failed on 196:
Jan 1 10:41:09 macpro configd[34]: target=enable-network: disabled
Jan 1 10:41:11 macpro mDNSResponder: NOTE: Wide-Area Service Discovery disabled to avoid crashing defective DNS relay 192.168.1.254.
Mac Pro 3GHz/4GB/3xHDD/X1900XT + 2x30" Cinemas. Mac OS X (10.4.8) PMG5/DP2½GHz — PBG4/1GHz 12".

TS1389 I have moved my iTunes library from an old PC to my new one running on Windows 8. All play normally apart from two albums: Songwriter by Justin Hayward and The Roaring Silence by Manfred Man''s Earth Band. The FAQ suggestions don't resolve the p

I have moved my iTunes library from an old PC to my new one running on Windows 8. All play normally apart from two albums: Songwriter by Justin Hayward and The Roaring Silence by Manfred Man''s Earth Band. The FAQ suggestions don't resolve the problem.

Honestly, all the people in all the world that look at this forum, no-one can tell me why my itunes is causing my machine to fall over?
I wiped the machine and started again. Fresh XP install, fresh iTune download, fired it up imported one album and bang. Over it went. I've PC Checked the hard ware, mad onioned the system to see if it's a resource thing but it's rock solid until i open iTunes. Then after every re-boot, the message is back in the event log.
This:
Source iPod Service Event ID 0
The description for Event ID ( 0 ) in Source ( iPod Service ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Service started.
Can someone at least reply to let me know I've not typed this in dutch!! :o)
Cheers
David

HT1338 How to download Java RuntimeEnvironment for my new Brother laser printer?

I recently purchased a Brother HL 2270DW laser printer to print from my iMac (Intel) desktop computer. However, after inserting the CD into the computer I get an error message stating thus "This OS version is not supported. Software cannot be installed." There is a firmware update v 1.17, release date 06-27/13 for the Brother printer but, again catch-22, it requires Java Runtime (environment).
When prompted to go to http://support.apple.com/kb/HT1338?viewlocale=en_US I see no further instruction on how to update the Java Runtime. I am running iMac OS X10.7.5. Please help.

https://www.google.com/search?q=Java%20Runtime%20Enviorment%20For%20Mac&ie=utf-8 &oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a&channel=np&source =hp
This link is from Google and shows several places.

ACK Issues! Long Bootup and roaring CPU fan!!

Hi all,
Two issues...
My 2 yr old iMac takes anywhere from 3-8 minutes to bootup. I get this grey screen with a circle and line through it. Then it boots to the normal desktop. LONG time..?
Secondly, the CPU fan roars all the time. It's pretty loud. I've used compressed air on the vent in back, but to no avail.
I'm running Tiger, 10.4.11. iLife 09
I'm wondering if I should upgrade to Leopard or Snow Leopard.... Would this help? Can I upgrade straight to Snow Leopard? Or do I need to go step by step through Leopard then Snow? LAME if I do..
Any other suggestions?
Thank you SO much!!
Jay.

Hi Jay,
I get this grey screen with a circle and line through it. Then it boots to the normal desktop.
Most likely Hard Disk problems.
Have you booted off the Install Disk by holding the *d key* down at boot-up, (not the c key), and run the extended Apple HW Test? Some Install disks require holding the Option key at bootup to select the AHT. Some Macs came with separate AHT CDs.
Secondly, the CPU fan roars all the time.
Intel-based iMac, Intel-based Mac mini: How to reset the System Management Controller ...
http://support.apple.com/kb/HT1543
I'm wondering if I should upgrade to Leopard or Snow Leopard.
I wouldn't just yet.
Any other suggestions?
http://www.bresink.de/osx/TemperatureMonitor.html
"Try Disk Utility
1. Insert the Tiger Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot , (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it finishes.
The usual reason why updates fail or mess things up, or things don't load/run, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates again, or even do an A&I if you have enough free disk space.
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
The combo update for Intel-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
Repair Permissions before & after re-install, then reboot again each time.
If all the above fails, then it appears to be time for a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings.
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.

My hd is making cracking sounds and a lour roaring HELP!

my hd has always been a noisy one.. a little while ago it started making the roaring sounds every now and then... does this mean that the HD will probably die on me in a little bit or is this a harmless problem with the HD

Well, you would most certainly not want to rely on the drive for anything critical! I would clone the drive to another ASAP. It may not mean anything but I for one would not want to take a chance. You do not mention how old this drive is but no drive should make "roaring sounds".

HT1338 Meow or Roar ?

Similar Messages

Maybe you are looking for