HT1338 My built in microphone is not working and my built in camera is not working.What do I do to activate these?

My built in camera is not working therefore, my photo booth and factime is not working. Now my built in microphone is not working. I can't find any way to troubleshoot these problems.

your phone is still under warranty.  Bring it to Apple for evaluation.

Similar Messages

  • I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

    I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

    You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. After you finish Setup Assistant will complete the installation after which
             you will be running a fresh install of OS X.  You can now begin the update process
             by opening Software Update and installing all recommended updates to bring your
             installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • My ipod touch is not working and it won't connect to itunes either what do I do? HELP PLEASE!!!

    My ipod touch is not working and it won't connect to itunes either what do I do? HELP PLEASE!!!

    My ipod touch is not working and it won't connect to itunes either what do I do? HELP PLEASE!!!

  • My husband uses adobe cs5. The clone tool isn't working and after resetting the tools adobe bridge now goes to picasa. How can we make the clone tool work and have bridge go to cs5 not picasa?

    My husband uses adobe cs5. The clone tool isn't working and after resetting the tools adobe bridge now goes to picasa. How can we make the clone tool work and have bridge go to cs5 not picasa?

    A lot more information about your hardware and software is needed.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    a screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • I have an ipad (IOS 7.1) and downloaded latest version of itunes (11.1.5.5) and downloaded itools (1.8.2.8) but my Itools does not work and message that your itools is not compatible with itunes so please want your comment for that.

    I have an ipad (IOS 7.1) and downloaded latest version of itunes (11.1.5.5) and downloaded itools (1.8.2.8) but my Itools does not work and message that your itools is not compatible with itunes so please want your comment for that.

    Hello JD_NINJA,
    Thanks for using Apple Support Communities.
    Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device.  To troubleshoot this issue please follow the directions below.
    Check your security software
    Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
    Get help with iOS update and restore errors - Apple Support
    When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
    Restore your device from an iCloud or iTunes backup - Apple Support
    Take care,
    Alex H.

  • I can't play the downloaded iTunes movie on my newly updated iMac to OS X Maverick. Why not? And How can I get it to work? Thanks.

    I can't play the downloaded iTunes movie on my newly updated iMac to OS X Maverick. Why not? And How can I get it to work? Thanks.

    Do you get any error message?
    What actually happens when you open it?
    What app are you trying to play the files inside? Try iTunes.
    I assume these files have DRM from the iTunes store. The Mac needs to be authorized to play them, open iTunes & select Authorize in the store menu, then sign in with the Apple ID that purchased the files.
    Select the iTem in iTunes & get info on it (from the File menu) & you can see the account name that it belongs to.

  • Quick Time player is not working and I can't see apple videos. What can I do?

    Quick Time player is not working and I can't see apple videos. What can I do?

    Backup files off the comptuer, disconnect
    run through 1-16 here anyway
    Step by Step to fix your Mac
    Reinstall Just OS X
    How to reinstall just OS X or erase/install OS X

  • My iphone's screen goes black and it behaves like that it is switched off.No switches work and the power button also does not respond.The ringtone do not also respond.The only way to switch on the phone is to press  home button and  power button together.

    My iphone's screen goes black and it behaves like that it is switched off.No switches work and the power button also does not respond.The ringtone do not also respond.The only way to switch on the phone is to press  home button and  power button together.

    Pressing the Home button and the sleep/wake or on/off button together until you see the Apple logo and then release is called a reset.
    If no change after a reset, the next step is restoring your iPhone.

  • If I plug a guitar into iPhone GarageBand using an interface, can I still use the built in microphone to record vocals and guitar at the same time?

    If I plug a guitar into iPhone GarageBand using an interface, can I still use the built in microphone to record vocals and guitar at the same time?

    Hi John,
    I think the only way is to get an iMic...
    http://www.bhphotovideo.com/bnh/controller/home?O=&sku=797644&is=REG&Q=&A=detail s

  • I did the "up grade" and now My I phone 4S show me the " I tune" sign and I have to plug...not working and can't make my I phone work.

    I did the "up grade" and now My I phone 4S show me the " I tune" sign and I have to plug...not working and can't make my I phone work.

    See this thread: iTunes 12.1 Not Finding iPhone

  • My aux input does not work. When i put in my headphones my mac does not respond, and my speakers just continues as normal. What to do?

    My aux input does not work. When i put in my headphones my mac does not respond, and my speakers just continues as normal. What to do?

    I had the same issue. Initially i thought i need to take it to apple for replacing the aux port. But luckily I was able to fix it by resetting the PRAM . To reset the PRAM
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Immediately press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.Continue holding the keys down until the computer restarts, and you hear the startup sound for the second time.
    Release the keys.
    Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.
    You can try this before you take to apple store. It may work if you are lucky. Good luck

  • My centre button has stopped working and my top lock button has stopped working too. I've had this iPhone 2 years now, can I take it into apple and swap for another phone or am I not covered? Thanks

    My centre button has stopped working and my top lock button has stopped working too. I've had this iPhone 2 years now, can I take it into apple and swap for another phone or am I not covered? Thanks

    The standard Apple warranty is 1 year. I believe you can purchase AppleCare+, which extends the warranty to two years from the date of purchase. This extended warranty needs to be purchased within 30 days of the purchase date for the phone.
    If you have the extended warranty, you may be able to get a replacement phone at no cost. You will need to make an appointment at an Apple Store Genuis Bar and have them take a look at the phone.
    If you did not purchase the additional warranty coverage, you should be able to purchase an Out-of-Warranty replacement, which is $199 for the iPhone 4S.
    ~Lyssa

  • Bought an ipod 4g at a pawn shop, it was locked and disabled but the guy said I could restore it, it didn't work and he won't take back the ipod what do i do?

    I bought an ipod 4g at a pawn shop, it was locked and disabled but the guy said I could restore it by connecting it to my computer and pressing the home and sleep buttons at the same time, it didn't work and he won't take back the ipod what do i do?
    When I try connecting it to my computer itunes opens and says I cannot connect to the ipod because it is disabled, enter passcode on ipod. The ipod is locked and disabled and will not allow me to try and put in a passcode, which I wouldn't be able to do because I have no idea what it might have been.
    I downloaded the newest version of Itunes, restarted computer, connected ipod, nothing, held every button down for what seems like forever, nothing. I think I have been screwed by the pawnshop. Is there anyway of restoring this thing or is now just a $60.00 paperweight?

    torreto44. that does not work with a Disabled iPod. Jim's gave the correct answer for a Disabled iPod
    torreto44 wrote:
    Hey man don't worry bout it ! Hold the power button and the circle button for a long time and it should reboot meaning the iPod will restart and u can set it up as yours with new apple i.d and password

  • Ipod 7th generation. bought it 3 days ago. no problem then but now won't turn on. I keep getting a usb device not recognized (and i keep changing ports to no avail). what to do?

    ipod 7th generation. bought it 3 days ago. no problem then but now won't turn on. I keep getting a usb device not recognized (and i keep changing ports to no avail). what to do?

    wish i can rmber how mine was fixed i think i just waited tried again and likr magic it worked again left itunplugged, i was like you recently boughtand it happened to me, now i have another diffrent promblem with it.

  • I am having font issues with font book. It validates the font, yet it is not availabe in my software programs (Adobe  or Microsoft). What can I do to use these fonts?

    I am having font issues with font book. It validates the font, yet it is not availabe in my software programs (Adobe  or Microsoft). What can I do to use these fonts?
    I actually created these fonts with fontagrapher in 1998 and have been using them regularly ever since and now they are not available in InDesign. I really need to use them.

    I found a page on Adobe, Troubleshoot fonts | Mac OS X
    On PostScript type 1 fonts you need to copy/move the fonts to the correct font folder because Font Book doesn't copy them into the folder. Select the fonts double-click the fonts and Find in the font Book app and validate.
    The correct font folder depends how you are set up. I am by myself so my font folder was MyHarddrive/Library/Fonts. I was using Suitcas fusion and the fonts are located in a different folder.
    Most of the fonts have worked. Go to
    http://helpx.adobe.com/x-productkb/global/troubleshoot-fonts-mac-os-x.html
    This should help. Good Luck.

  • I have been working on an iMovie project. I turned off my computer and when I turned it back on to continue working and entire section of about 80 photos was gone. The music attached to these photos remains. Can I retrieve this work?

    I have been working on an iMovie project. I turned off my computer and when I turned it back on to continue working and entire section of about 80 photos was gone. The music attached to these photos remains. Can I retrieve this work?

    I am at Snow Leopard and have only played a bit in IMOVIE - so can't speak for Mavericks - but -
    In general as I work a lot in Photoshop - when you are happy with something save it and continue on - If you have Time Machine Running and you want to try things next that may or may not work - force a time machine backup - that way the version you are happy with will be available for 24 hours (and wish this was a setting one could extend) 
    If you turn off your mac - or end a program without consciously saving something you may lose what you worked on.
    If IMOVIE did not ask if you want to recover what you were doing your update may be gone - but try posting new question - asking about automatic backups in IMOVIE and how they work.

Maybe you are looking for