HT1338 my firewire to my storage device USB 2.0 has suddenly stopped working
my firewire to my storage device USB 2.0 has suddenly stopped working
Still doesn't do it for me. FireWire to USB device adapter? Peruse http://www.wisegeek.com/what-is-a-firewire-to-usb-adapter.htm for more on this. Alternatively, contact the USB device manufacturer.
Similar Messages
-
My iPad3 has suddenly stopped working, it won't charge up and the screen is blank I have tried to reboot the device by holding the top and home buttons but I don't even get the Apple logo. any advice?
Plug it into the charger/wall socket and let it charge for at least an hour. It just might start charging. If you have already tried charging it for a fair amount of time and it didn't work, try restoring the device with iTunes.
iOS: Not responding or does not turn on - Apple Support -
My Firewire port has suddenly stopped working. Please help!
I have a G4 Mac Mini, with 512 MB of ram. I was happily computing along when I went to go on my external hard drive and I noticed it wasn't there!!! At first I thought it was the hard drive, but it wasn't because my old iPod mini wouldn't work either. I tried the Apple Hardware Test, but it didn't even think I had a firewire port, which made me think I needed to reinstall Tiger, as it might reinstall the drivers? But it didn't. Apples website doesn't seem to have any drivers available for download either. What should I do? I need my photos, which are on the drive for school!!!
Thanks for your help
MaxHi mash4t-
Greetings and welcome to the Apple boards.
You may find this document helpful: What to do if your computer won't recognize a FireWire or USB device
Luck-
-DaddyPaycheck -
I have plugged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?
if the device I connected have caused this, shouldn't the macbook itself have some type of protection that should prevent this from happening.
because when I took it to an apple certified maintenance shop, the guy said that now it could only run while connected to the power. it won't run on batteries. and that I have to change the motherboard.
can I just replace the damaged part only, would apple consider this as a design issue and they could pay for it, or should I just buy a new motherboard for 800$.
Help.BB1B2,
The problem is in finding a tech shop that will/can do board level repairs on Macs. They are few. And I certainly wouldn't spend $800 on a new logic board - I would replace the computer if I had to pay that much!
You could call around to a few repair shops and see if they feel competent to isolate the problem and do a board level repair - but I'm afraid, in the end, that your search will be futile.
Sorry,
Clinton -
Mac Mini and USB 2.0 hubs (hubs stop working within a month)
I have an aluminum Mini running OSX 10.6.6 (Snow Leopard). With only 4 USB ports, I have need of a USB hub to accommodate my external drives and other peripherals: keyboard/mouse, camera and iPhone have to use the existing ports in the Mini (difficult access to ports due to space limitations), leaving one port for up to 4 external drives (older drives 40-60gb used for backup and extra storage).
I have problems using powered USB 2.0 hubs with this computer; I have 'burned out' 2 hubs since buying the Mini in February. They just flat out stop working, though they still show power (the power indicator light on the hubs); no peripheral is recognized when plugged into the hub (which worked fine for about a month). I can unplug the 'must use Mini ports' (camera, iPhone, charger, etc) and the peripheral drives are recognized and work normally when plugged directly into the Mini ports.
One hub was a Belkin 4-port hub (about 1 year old) and the other was a GE 3-port hub with several flash card readers (19-in-1 card reader), also about a year old. Is there any reasonable explanation why powered hubs would suddenly stop working, related to use with the Mac Mini 2010 aluminum version?
I had worse problems with the USB ports in an old (~2006) Mac Mini (out of warranty), where the USB ports in the Mini stopped working, which is partly why I bought the new mini. In light of this tidbit, (be honest, please) are there known issues with Mac Minis and USB?Each of the external drives has its own power supply; I generally only use one drive at any one time, but on rare occasions I have powered up more than one to confirm or transfer files. I don't leave any of those drives on when not in use, and when everything is working I properly eject/unmount them before turning them off.
There have been times when I powered up a drive connected to a powered hub and both the hub and the drive indicated activity but the drive didn't mount. On those occasions the drives sometimes would not appear in Disk Utility, and other times would appear, but would not be "mountable". I didn't know what the best way to deal with that was, so I would just turn the drive off, hoping the lack of mounting on the desktop meant no real drive activity was occurring and I wouldn't risk data loss or drive damage. So far all the drives seem to work fine when plugged directly into the back of the mini.
The main external hard drive I was using when the Belkin hub failed (iomega 40g) is USB 2.0 only (no firewire). I have another drive that is only firewire (la cie 60g)... so it wasn't a factor. Two other external drives are ACOM, one 40g one 120g, and then there's my old iMac G5 disk (display fizzled and everything but the disk recycled through Apple's recycling program) which is mounted in an external enclosure and is part of the USB contingent, but is not being used for anything but backup (all three both USB 2 and FW400 capable). (I know, too many toys... but why throw them out?)
The USB hubs both had their own power supplies, too, and I never used them without power (though I tried it as part of troubleshooting, before reading the Apple article on USB and power requirements). Other USB devices that only work when plugged into the mac directly are my Epson Stylus CX4800 all-in-one, and my Radio Shark.
So, whaddya think? Should I risk buying another powered USB hub or just live with plugging in peripherals to one available USB port (through a short USB 2.0 extension) and only use one at a time? That would be a bit of a pain, but if there are no issues you've heard of with Mac USB ports (several unanswered questions in the Mini Support forums here involving USB and peripherals, I noticed), what else would explain the seemingly short lives of USB hubs?
Oh, here's something I just remembered: the last time the Belkin hub was working (last night), I had my Radtech BT mouse charger cable plugged in (not charging, mouse not attached) along with two of the external hard drives, and my Fuji camera USB cable. I got an error message onscreen (on the Mini) that a drive had been improperly ejected (or put away?), yet the hard drive in question was still mounted on the desktop. I looked at the hub, and the loose ends of the charger and the camera USB cable were touching. Could that have caused the error (and maybe the hub to fail)? (Edit: the camera cable I think was plugged into the mini's one available port; 3 external drives and the mouse charger were plugged into the hub, _but only one drive powered up and in use (3rd edit)_. The camera end of its USB cable contacted the mini-plug end of the mouse charger... could that have short-circuited the hub? +That wouldn't explain the failure of the GE hub a couple weeks before... but I don't know if any of this is connected, so to speak--2nd edit.+)
Message was edited by: blick
Message was edited by: blick
Message was edited by: blick -
I have hp laptop dv9009us one day all the USB ports and webcam camera stopped working
I have hp laptop dv9009us one day all the USB ports and webcam camera stopped working, I had windows XP and tried all solutions posted on online forums didn’t work, I upgraded to windows 7 and still not working, please note that the USB is detected in device manger and it says working properly but he webcam is not detected at all, also when I connect any device to USB it gives it power and I even can charge my cell phone but it doesn’t detect any device. Is there any genius out there that can help me?
Also after I installed windows 7 I went o system information----software environment--- system drivers, and I found all USB drivers stopped by the way this was the case in windows XP as well
usbccgp Microsoft USB Generic Parent Driver c:\windows\system32\drivers\usbccgp.sys Kernel Driver No Manual Stopped OK Normal No No
usbcir eHome Infrared Receiver (USBCIR) c:\windows\system32\drivers\usbcir.sys Kernel Driver No Manual Stopped OK Normal No No
usbehci Microsoft USB 2.0 Enhanced Host Controller Miniport Driver c:\windows\system32\drivers\usbehci.sys Kernel Driver No Manual Stopped OK Normal No No
usbfilter AMD USB Filter Driver c:\windows\system32\drivers\usbfilter.sys Kernel Driver No Manual Stopped OK Normal No No
usbfltr Razer Copperhead Driver c:\windows\system32\drivers\copperhd.sys Kernel Driver No Manual Stopped OK Ignore No No
usbhub Microsoft USB Standard Hub Driver c:\windows\system32\drivers\usbhub.sys Kernel Driver No Manual Stopped OK Normal No No
usbohci Microsoft USB Open Host Controller Miniport Driver c:\windows\system32\drivers\usbohci.sys Kernel Driver No Manual Stopped OK Normal No No
usbprint Microsoft USB PRINTER Class c:\windows\system32\drivers\usbprint.sys Kernel Driver No Manual Stopped OK Normal No No
usbstor USB Mass Storage Driver c:\windows\system32\drivers\usbstor.sys Kernel Driver No Manual Stopped OK Normal No No
usbuhci Microsoft USB Universal Host Controller Miniport Driver c:\windows\system32\drivers\usbuhci.sys Kernel Driver No Manual Stopped OK Normal No No
uwbusb UWB Bus Control USB-Miniport Driver c:\windows\system32\drivers\usbuwbmini.sys Kernel Driver No Manual Stopped OK Normal No NoDid you ever get this resolved? I am having the same problem and have tried just about everything for my dv9000.
-
After update to 11.2.202.228 mz USB 1.1 web cam stop working
Hi,
I have a camera from MediaTech company, it is written on it MT400 and serial number 2604050599. Before latest update it works, after install newest version of Flash Player it stop working. I tested it on http://testmycam.com as one of Adobe employee advices on forum but I have only black rectangle. On top left corner of this rectangle it is written Camera: USB PC Camera (SN9C 102) , FPS 10. I disabled Hardware acceleration but problem remains.
As I remember this camera is USB 1.1. Does new Flash Version support USB 1.1?
I have checked on Device Manager on my Windows XP Home Edition 2002 Version with SP3 device driver version it is written:
Manufacturer : Sonix
Driver date: 2004-04-02 (I can't find newer drivers on web )
Driver version: 4.6.6.1
Is it bug or Flash Player stops supporting such devices?
RegardsI pressed Allow, before pressing Allow background was grey, after Allow
it gets black. I see the name of this camera on list. I also try another
camera from Logitech (I can't remember what name was it, but one of the
newest) and everything works which suggest it is strictly related with
this specific camera which I'm using.
Regards
W dniu 2012-03-31 08:39, Nodster pisze:
>
Re: After update to 11.2.202.228 mz USB 1.1 web cam stop working
created by Nodster <http://forums.adobe.com/people/Nodster> in /Using
Flash Player/ - View the full discussion
<http://forums.adobe.com/message/4304094#4304094 -
my usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility
Either the physical drive or the enclosure electronics has failed. The light you are seeing is powered by the USB connection, the power, electricity, all USB ports put out. That doesn't mean the actual physical hard drive or the USB to SATA bus electronics are working properly. If it doesn't show in Disk Utility then it is DEAD.
Most of the time it is the enclosures electronics that fail. Removing the physical drive from the enclosure and put it in another enclosure or using a SATA to USB adapter, one that has it's own AC power supply, might allow you to get the files off the drive. -
My iTunes suddenly stopped working and doesn't recognize any of my devices and gives me a AMD error. I've tried several times to uninstall all Apple programs and reinstall to no avail. I'm running windows 7 on a Dell laptop. It worked fine for years then I decided to update my iPhone 4S and it didn't recognize it or any other iPod or iPad.
Can someone please help ?I am having all sorts of problems with 9.1.1.Crashes and not only iTunes but I have to restart all the time.
GET TO WORK APPLE !!!! -
When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone. This previously worked, but has randomly stopped working. help!
I took my iPhone to the Service center of M/s RSG INFOTECH PRIVATE LIMITED on April 17, 2014.
Why are you posting in this forum about what occured with an independent service provider? How is is at all relevant to Apple?? In fact, service by any person or business not authorized by Apple voids any waranty. -
My Mac mini server has suddenly stopped seeing one or the other bluetooth devices, either the wireless keyboard or the mouse( both apple products) have tried new batteries, at first it was the mouse that stopped responding, but upon rebooting the computer now the keyboard will not respond and the mouse works. Both work fine on an older Mac mini that I hooked back up to check.
There is absolutely no reason why they should not bothe be able to connect to your WiFi network. The easiest place to start would be to reboot your router. Unplug it for about 30 seconds and then plug it back in again. I would also restart both the iPad and the iPhone.
-
My MacBook Pro will not connect to my home wifi but will connect everywhere else. My other Apple devices (I-pad, I-touch, another MacBook Pro) connect to the router without problems. It was working fine but all of a sudden stopped working.Thanks!
try this.
get back into your router's settings and start deleting devices that are not connected to your router.
you can also delete the ones that are connected - they'll connect again.
on the DHCP side of it, increase the amount of users that can connect/log in to your router.
see if that sorts it out for you.
good luck. -
Hi
My Iphone 5 has recently stopped working on my home wi-fi and my car bluetooth. The phone will connect to other wi-fi devices but nothing on the bluetooth at all. Other devices are able to connect to the home wi-fi.
I have reset network settings and reset all settings. Still it wont connect to the home wi-fi or my car.
I have since taken my car in for it to be checked by the garage and am having the same problems in my courtesy car.
Short of throwing the phone out of the window any suggestions how I can fix it?
I'm thinking it'll have to be a factory restoreHi
My Iphone 5 has recently stopped working on my home wi-fi and my car bluetooth. The phone will connect to other wi-fi devices but nothing on the bluetooth at all. Other devices are able to connect to the home wi-fi.
I have reset network settings and reset all settings. Still it wont connect to the home wi-fi or my car.
I have since taken my car in for it to be checked by the garage and am having the same problems in my courtesy car.
Short of throwing the phone out of the window any suggestions how I can fix it?
I'm thinking it'll have to be a factory restore -
The device was suddenly stopped working
The device was working perfectly for 4 days ( it's new )
But he suddenly stopped working and I could not turn it on
I did not know the reason?? Please help meThe Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
May iMac (OS 10.7.4) has suddenly stopped printing to my Epson CX4800 printer through Airport Extreme, though my MacBook (OS 10.5.8) continues to function just fine). The iMac will print if it is connected to the printer directly via USB. The iMac continues to connect to the Internet wirelessly. I've tried resetting the printer and ensuring the driver is up to date, but no joy.
Any suggestions?EPSON Stylus CX4800 All-in-One Printer
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=58606&prodoid=56291 067&infoType=Downloads&platform=Macintosh
Maybe you are looking for
-
Moving house with a slow telephone exchange
hi guys were thinking of moving house to a more rural location but the house is about 3.5km away from billingbourgh exchange and will only get around 1mb internet, does anyone of a way of getting it faster or when the exchange will be updated??
-
FD33 - SALES VALUE - Field name SAUFT
Hi, SAP defines the sales value (FIELD: SAUFT) as "the total of all order values which have not been transfered to FI, but which are taken into consideration when checking the credit limit." I have a situation here, whereby a customers credit Limit h
-
Instaling Photoshop Elements 12 issues
It downloaded but when I hit the button when it was done, it took me to this page, and I have no idea what to do.. please help me!
-
Hi, Please guide me about the following query: I have designed a form to print certain data. Now user wants whenever he give a print command for this form, it should always print four copies of the form with four differnt text e.g. Copy of Vendor, Co
-
A question about restoring from an old Time Machine backup
My computer has been acting very slow and freezing frequently lately. The spotlight background processess keep hogging the processor, and It keeps getting catalog b-Tree corruption. I've already done one complete reformat of my drive and a restore