HT1338 my mac osx will not update

Hi When i plug in my new iphone to use with itunes to config it says my software isnt up to date, i click in the apple menu to update and it says updates are not available at this time, my version is the old 10.5.8, my itunes is 10.6.1, when i try to down load new itunes 11.0. it says that my software is out of date etc. does any body know how to fix this problem.
many thanks Clint.

Click here, check that the computer meets the system requirements, and if it does, buy the DVD.
(73437)

Similar Messages

HT1338 10.4.11 will not update

my macbook 10.4.11 osx will not update to mountain liion states that i need to be on 10.6.00 prior to moving forward

If you're running Tiger on a MacBook(this is true for some MacBook Pros too), your system is incapable of running Mountain Lion.
(73763)

HT1338 White Mac book will not start up just shows gray screen with apple logo

White Mac book will not boot up gray screen only

There are some recovery steps for this condition outlined in the below article.
Mac OS X: Gray screen appears during startup

My mac computer will not update new software

Hi
My IMac is very old and is not under warranty anymore just for reference. I have taken my computer to an Apple Retailer to get major problems fixed before and the issue's subsided. But one problem is still here.
My IMac will not update new software, everytime I have attempted to update my software before and it does nothing, if the software happens to load and finish then when it says "to finish the update you will need to restart your computer" that is the problem, my computer cannot update new software because it does not restart properly and therefore cannot do any initail updating and it is becomming very fustrating. I have no idea what to anymore. I have pretty much just given up the fact that my computer is completely ancient.

What happens when you try?
Are you updating OTA or via iTunes?
GB

HT1338 My iPhone 4S will not update it's been saying error for the longest. Is there something wrong ?

Phone will not update ..is there something wrong ?

Connect it to your computer and try updating using iTunes.
You'll see the phone name under Devices in the left side of iTunes window.

HT1338 Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

Sorry for being unclear.
When I am using the update in the App Store App, there will be a list of various applications that have updates to be installed (Final Cut Pro will be in this list). I will already be logged in with the Apple ID I use for everything (my dev account). I will be able to update all of the other various applications needing updating except for my Final Cut Pro. When I click the update button next to the FCP update, it will give me an error saying "This download is not available for this apple ID either because it was bought by a different user or the item was refunded or cancelled"
I have not had any applications refunded or cancelled and this has only happened since my update to Yosemite. FCP was working fine until the upgrade. Is there anything that can be done to fix this?

Installed New Internal HD, Mac OSX will not install...

Any help would be greatly appreciated. I installed a brand new Hitachi 120Gb drive this morning. Put in Install disk that came with my 12" PB and ran disk utility. i erased the disk and set it up for Extended (Journaling)
It has a mount point of:
/Volumes/Macintosh HD and the S.M.A.R.T status word is not even there.
Anyone know how i rectify this as when i go to instsll the OS it says:
'You cannot install Mac OSX on this volume. You cannot start up with this disk'

tripoli:
Try this:
Formatting, Partitioning Zeroing a Hard Disk Drive
Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
Boot from the install CD holding down the "C" key.
Select language
Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
Select your HDD (manufacturer ID) in left side bar.
Select Partition tab in main panel. (You are about to create a single partition volume.)
Select number of partition in pull-down menu above Volume diagram.
(Note: 1 partition is normally better for an internal HDD. External HDDs usually have more than one)
Type in name in Name field (usually Macintosh HD)
Select Volume Format as Mac OS Extended (Journaled)
Click Partition button at bottom of panel.
Select Erase tab
Select the _sub-volume under Manufacturer ID_ (usually Macintosh HD).
Check to be sure your Volume Name and Volume Format are correct.
Select on Security Options button (Tiger) Options button (Panther & earlier).
Select Zero all data. (This process could take several hours. If you want a quicker method, don't go to Security Options and just click the Erase button.)
Click OK.
Click Erase button
Quit Disk Utility.
Open installer and begin installation process.
Choose to Customize and deselect Foreign Language Translations and Additional Printer drivers.
Check box to install X11 (Tiger) BSD Subsystems (Panther & earlier).
Proceed with installation.
After installation computer will restart for setup.
After setup, reboot computer.
Go to Applications > Utilities > Disk Utility.
Select your HDD (manufacturer ID) in left side bar.
Select First Aid in main panel.
Click Repair Disk Permissions.
Connect to Internet.
Download and install 10.4.10 Combo update
Computer will restart after updates.
Go to Applications > Utilities > Disk Utility.
Select your HDD (manufacturer ID) in left side bar.
Select First Aid in main panel.
Click Repair Disk Permissions.
Please post back with further questions or comments.
Good luck.
cornelius
Message was edited by: cornelius

Mac OSX will not boot, when I log in, it shuts down after grey screen and grey loading bar show up: PLEASE HELP (:

So here is a lowdown on my problem.
I start my mac OSX, I hold down the alt/option key and load my MAC osx drive (which is the only drive available; however, when i do not hold down the alt/option key it will go to a black screen that says "no bootable device, press a key when device inserted"). Continuing, it then goes to my login screen where I have my username, and I can enter my password like usual. I enter my password, hit the enter button (like I always do), and this is where my problem begins.
After I enter my login and hit enter, the screen goes grey, with a little apple symbol in the middle and a different shade of grey loading bar underneath. This grey loading bar shows up for about 10 seconds, fills up about 10-20 percent, and then shuts my computer down.
No matter what I do, this process repeats over and over, and heres where the problem gets worse, and this part is VERY IMPORTANT and is the most depressing, stressful part of the process.
NONE of the startup/boot commands work except holding the alt/option key. I can't hold: Command plus r; command pr to reset PRAM; shift to enter safe mode.
I really dont know what to do here :/. I have files that I want on the hard drive, that are pretty important but not critical. I gave up on wanting the files back but now I want to simply WIPE my computer and re-install a clean version of OSX onto the computer, but I CANNOT GET TO THE REINSTALLER :(.
More information that may be helpful:
          I do have a partition on the HDD that I was going to use for Bootcamp, but it does not have anything installed on it (thus causing the "no bootable device" screen to load, and probably causing the boot commands not to work).
          My version of Mac OSX is 10.8.4. "MBP 15.4/2.8/16GB/768 flash"
          The last time I restarted my computer, my mac OSX RAM was down to 1.75 GB, with nothing open. Usually when nothing is open the free RAM is around 10-13 GB (I know this because I have the activity monitor always open, and I use my computer a lot).
          Again, boot commands will not work, except for holding the alt/option key.
So if anyone can help me fix my problem(s), which are:
1: using boot commands; 2: reinstalling mac OSX; or 3: getting my files,
I would love you forever. I would really prefer 1 or 2. Thanks for reading this.

Oh and one more thing, I do not have a disc drive in the mac osx. The version I have comes without one.
I am very puzzled about what to do right now.

HT1338 My mac mini will not allow me to update itunes with osx mountain lion 10.5. I check for software updates and it says none.

what shall' I do?

10.5 is not Mountain Lion. You need to find out what release of OS X is on your Mac. Go to >About This Mac and tell me what you see.

With iOS8.1 I can no longer sync MAC iTunes playlists to my iPhone. Purchased new song with iTunes and it is on my MAC but will not update to iPhone when I sync!

With iOS8.1 I can no longer sync my iTunes MAC playlists to my iPhone! I purchased a song on Itunes store and put it into a playlist on my MAC. When I sync (as usual) with my iPhone, the playlist no longer updates to include the new song (i.e., playlist stuck at 16 not 17 songs)... yes, all devices are authorized... If I turn on HOME SHARING it will work, but the moment you disconnect, everything goes away... What is APPLE doing?

From my post on what seems like the same issue (found here: https://discussions.apple.com/message/21087892#21087892)
Take the following steps:
1) while connected to wifi, toggle off then back on the Show All Music and iTunes Match options shown in my original post. Important: I did this step before, but wasn't connected to wifi, and my music disappeared. Subsequently, I connected to wifi and turned off and then back on those options and everything came back though it was grayed out and my only option was to download music.
2) To get streaming over cellular back, go into Settings>General>Cellular and scroll down to the "Use Cellular Data for:" options and make sure the iTunes option is set to 'On'
The above steps will bring back the streaming capability which seemed to go away when you update to 6.1. It didn't ACTUALLY go away, but something about the update toggled off the iTunes option in step 2 above.
I did a final test by turning off wifi, opening Music app and selecting a song. It played successfully without downloading! Crossing my fingers, but I think I'm good to go!
Hope this helps!

HT1338 My Mac App will not open and I dont know how to re-install it. HELP PLEASE!!!!

Hey Guys,
Just wanting to open my Mac App and update OS etc also wanted to install FaceTime. My iTunes works fine, everything else works fine but when I try to open Mac App Store I get and error message:
Process:         App Store [3046]
Path:            /Applications/App Store.app/Contents/MacOS/App Store
Identifier:      com.apple.appstore
Version:         ??? (???)
Build Info:      Firenze-630100~1
Code Type:       X86-64 (Native)
Parent Process: launchd [95]
Date/Time:       2012-08-20 21:29:08.608 +0100
OS Version:      Mac OS X 10.6.4 (10F569)
Report Version: 6
Interval Since Last Report:          584378 sec
Crashes Since Last Report:           8
Per-App Crashes Since Last Report:   6
Anonymous UUID:                      0318BE04-6279-4D91-85F4-0F6B57FCA681
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/CommerceKit.framework/Versions/A/CommerceKit
Referenced from: /Applications/App Store.app/Contents/MacOS/App Store
Reason: image not found
Model: MacBookPro5,5, BootROM MBP55.00AC.B03, 2 processors, Intel Core 2 Duo, 2.26 GHz, 4 GB, SMC 1.47f2
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.10.91.27)
Bluetooth: Version 2.3.7f1, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS723225L9SA62, 232.89 GB
Serial ATA Device: MATSHITADVD-R   UJ-868, 807.2 MB
USB Device: iPhone, 0x05ac (Apple Inc.), 0x1297, 0x24100000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24400000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0237, 0x04600000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0x26500000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8213, 0x06110000
Not sure what to do, any help would be great!!!
MINI8334

You can redownload most itunes purchase by the following. What you can redownload depends upon where you are located.
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Cannot play yahoo games anymore on my mac- java will not update any ideas

i used to play cards on yahoo games, but can't anymore....the games won't load....any ideas? thx!

Also make sure the file type is not of a DivX. That your camera supports. Which QT for Mac also supports, but the Windows version of QT does not support DivX, so you're not purchasing something for the Windows computer that is not needed?

HT1338 my mac air will not turn on

help me get my mac air to turn on

Found this in another post -- it should help, assuming you've tried simply holding the power button for 15 seconds already.
As a first step you could try an SMC reset followed by a PRAM reset:
SMC Reset
Shut down the computer.
Unplug the computer’s power cord and disconnect peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
Reset PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P and R.
You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Download error in CC update app on Mac. Will not update PS

MACBOOK PRO
Lightroom & PS
PS current version : 20140926.r236 x64
Says to contact customer support, but every time I try to start a chat, I stay in queue for 30 minutes, and give up. Now it's after hours.
HELP!

Please read, and reply back here with information https://forums.adobe.com/thread/1499014
-and try some steps such as changing browsers and turning off your firewall for downloads
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Mac will not update to iTunes 11.1

HI ALL
I have a Mac that will not update to ITunes 11.1 and i
updated my IPhone 4 to IOS7 and cant restore my IPhone can anyone help me please
Cheers

Ahamad Ali wrote:
Hi Apple,
Hi, this is a User to User Forum...
Ahamad Ali wrote:
Should i be downloading iTunes separately?
You can here > www.itunes.com/download

HT1338 my mac osx will not update

Similar Messages

Maybe you are looking for