HT1338 my usb ports dont work

everything else works except them. Never got them wet and fairly clean....seems like something in the system because i can charge it and use all the other ports....
this is on a macbook pro i bough in summer 2010

Have you tried other USB devices?
Ciao.

Similar Messages

  • Usb ports dont work

    i was playing around in the library and in the applications and have deleted deleted for good some files....so now usb port dont work! what do i do? do i reset the whole operating system? please help! thanks

    Hi, and welcome to Apple Discussions.
    You can find instructions on how to do an Archive and Install in the following Apple Knowledge Base article:
    http://docs.info.apple.com/article.html?artnum=107120
    Good luck.

  • IMAC 20  INCH INTEL WHITE USB PORTS DONT WORK

    i have a 20 inch intel imac white and my usb ports dont detect any of any external devices such hard drive and camera or usb flash ,but my keyboard and mouse are detected and work .I already did a smc reset and pram and they show up under the apple profiler and i created a new user and tried it from there still nothing .Will a power usb hub fix this issue ,i think its a low voltage issue any suggestions.I have tried all the ports as well all the same
    Message was edited by: s281er238

    Hi Enialreve,
    Thanks for posting and welcome to the Lenovo Community,
    I’d like to help you with the issue that you’re facing and I need to confirm you that all the steps that you’ve done is absolutely correct,
    And as I can see that you’ve followed all the steps that we can do inside the operating system,
    And I’d like to advise you that we can try to perform a recovery to get the machine back to the initial state and am sorry to ask you to take a backup from the data you need as the recovery will get the machine back as a new machine and all the Data on C: partition will be lost,
    Kindly turn off the machine and connect the charger and the battery and then press on the One key recovery button which is the small one with the curve arrow,
    And then the system will be booting to the recovery,
    For more information about the recovery check the below link:
    One Key Recovery
    Hope the information helps. Let us know.
    Regards
    Soha
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • HT1529 Usb Ports dont work after Mountain Lion?

    I recently updated my macbookpro to Mountain lion Os X and now whenever I connect a Flash drive to my usb port it doesnt work. I connected my iPad and iPodtouch and it still charges from the usb port, but it doesnt connect to iTunes. Anyone have an idea on what is happening here?
    I have a Mid 2010 Macbookpro 13 inch, I upgraded Snow Leapord to Mountain Lion 

    I would reinstall:
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • I have 2 computers with my itunes account on it and i synced my iphone to my laptop and it deleted one of my playlists. Only 1 computer has that playlist on it and the USB ports dont work. How do I get the playlist back?

    i need help downloading a playlist without connecting my Iphone 4S to my computer. HELP!!!!!!!!!!!!!!!!!!!!!!!???????????????????

    I haven't tried this myself, but you could probably use Home Sharing to copy your playlist to your other computer.  First set up home sharing on both computers (http://support.apple.com/kb/HT4620), then on the computer with the playlist go to iTunes>Preferences>Sharing and choose share selected playlists, checking the playlist that you are trying to recover.  Then on the computer without the playlist, create a new playlist with the same name, then drag and drop the songs from the other computer into the playlist you just created.

  • Cannot get USB port to work after re-installing of SP2 on Satellite Pro L20

    After re-installing XP Home SP2 and downloading all the updates & Drivers from here I cannot get my USB port to work properly, if I have more than one peripheral plugged in it says "Bandwidth Exceeded".
    I have a Behringer BCD2000 which is a souncard/midi controler for DJ mixing, it worked fine before i reinstalled windows, now it clicks and pops when playing tunes, also the ASIO doesn't work when I run Traktor (Dj software) and the program freezes. Any other external sound card wont work either. I've been all through the device manager no conflicts apart from an ! over Serial under hidden devices.
    I'm lost, is my only option buying a PCMCIA sound card, it worked fine before so surely there is a software solution to this?
    If anyone can help I'd be most appreciative.

    Hello
    Try to disable USB Error Detection:
    1. Right-click My Computer and then click Properties.
    2. Select Device Manager to view the Device Manager
    3. Locate and click the Universal Serial Bus Controller entry.
    4. Double-click Universal Host Controller and then click the Advanced tab of the Universal Host Controller Properties.
    5. Put a checkmark in the box for Disable USB Error Detection. Click OK.
    6. Restart the computer to see if "Bandwidth Exceeded" message occurs again
    Did you use recovery media to reinstall WXP? When someone write it worked before and now not it is really not easy to say why this happen. Try to configure notebook as before and maybe it will work again. Behringer BCD2000 is not known to me and I dont know how it works and which software must be preinstalled there.
    Can you use different USB devices like external HDD, USB mouse, USB memory stick or printer?

  • My iphone5 wont charge with usb port but works fine with wall plug... Infact computer. Doesn't recognizes the iphone

    Battery not charging with usb port but works fine with wall plug.. So the prob is computer is not detecting the iphone5 . This problem started after upgrading to 6.1.3 version

    Try to see what happens on another computer. If it works on another computer, the issue is not at the iPhone.

  • My Iphone 3gS is not being recognized in Itunes on my laptop. It is charging so the USB port is working properly. My wifes Iphone IS being recognized by the same laptop. My Iphone IS being recognized by the desktop computer and another laptop

    My Iphone is not being recognized in Itunes on my laptop. It is charging, so the USB port is working. My Iphone does work on another Laptop in the house and My wifes Iphone is being recognized on the same laptop that mine is not. Any suggestions?

    The key bit of information here is that one iPhone works on the computer in question and another does not. So it is unlikely that AMDS is not running or there is a driver problem; if either of these was the problem neither phone would be recognized in iTunes.
    Unfortunately, I don't have an answer either. Except to verify that both iPhones (the one that works and the one that doesn't) use the same cable and the same USB port.
    Also, are the two iPhones the same model and same iOS version?

  • Installed Windows & 32 Bit But Drivers and USB ports NOT WORKING.

    I bugh an HP Pavillion TS 14 Notebook that came preinstall with Windows 8.1 64 bit which I hate so wiped the drives and installed Windows 7 32 bit and now I have a big problem.  None of my network drivers work and the 2 uSB ports where I plug my mouse and other SB hardware in no longer work. 
    I did a back up of the SW Set up file that has all of the HP dvers for my laptop but both the network and video divers won't install. And When I try to install the drives I get the eror message saying they are not compatible with this version of Windows.
    I have loked on the HP website under my laptop model which s as above but HP don't do drivers for Windows 7 32 for my laptop. And I have looked on both the Realteck website for both the Realteck ethnet and Realteck wireless network drivers but none of them work or install on my operating system. The video drivers Intel don't work either. So I am really stuck a I cannot go back to Windows 8.1 as though that 32 bit Windows 7 would work on my laptop but most of my drivers are not compatible with the operating sytem And I don't want to install 64 bit Windows as I like 32 bit.
    The drivers that are not working on Windows 7 32 bit are:
    Realteck RTL8188EE 802-11b/gn witeless lan
    Realteck ethnet die and
    Intel High definition graphcs driver 
    Which don't work at all on Windows 7 32 bit as they are 64 bit only drivers.
    So can you please post me a link bth the network and Intel graphics drvers that work with my laptop. As I have tried lots of different Realteck and raphics drivers for Window 7 but NONE of them work on my system. And None of my USB ports are working either. So how do I solve this problem?
    This question was solved.
    View Solution.

    Hi:
    Should be no problem to get W7 32 bit to work on that model.
    Just use all of the drivers and software from the HP Probook 450 G0 on your model except the Audio, BIOS and firmware files.
    Your model uses the Intel HD graphics driver only.
    The first driver you have to install is the Intel chipset installation utility and then reboot.
    http://h20565.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?cc=us&lang=en&sp4ts.oid=5359407&ac.ad...
    Audio:  Accept the agreement.  Download and install the first driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownT...
    If for some reason, the Intel HD graphics driver from that model does not work, then use this one...
    https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23713

  • HP Pavilion dv6 All 4 USB ports stopped working

    Hello,
    I recently bought a Pavilion dv6-6c11sa laptop. Windows 7 Home Premium 64-bit
    Everything was working fine for about a week, and then yesterday all of the USB ports stopped working. I have 4 USB ports in total, two 2.0 and two 3.0. No matter what peripheral device I plug in, mouse or flash drive etc, they're not recognized by the laptop. The lights don't even light up on the devices, regardless of the port. I've tried uninstalling and reinstalling the drivers in device manager, taking out the battery and rebooting, installing the chipset drivers (AMD), nothing works. No programs had been installed 3 days prior to the occurence, although I had rebooted several times in that time frame. I simply booted up the laptop yesterday, and nothing worked.
    Could anyone offer a solution or suggestion, please?

    Hello,
    I recently bought a Pavilion dv6-6c11sa laptop. Windows 7 Home Premium 64-bit
    Everything was working fine for about a week, and then yesterday all of the USB ports stopped working. I have 4 USB ports in total, two 2.0 and two 3.0. No matter what peripheral device I plug in, mouse or flash drive etc, they're not recognized by the laptop. The lights don't even light up on the devices, regardless of the port. I've tried uninstalling and reinstalling the drivers in device manager, taking out the battery and rebooting, installing the chipset drivers (AMD), nothing works. No programs had been installed 3 days prior to the occurence, although I had rebooted several times in that time frame. I simply booted up the laptop yesterday, and nothing worked.

  • A barcode scanner that was connected directly to the Mac's USB port stopped working as the "USB had too much power drawn", even though it has worked for over a year in that port.  WHen we plugged it into the port on the keyboard, the device works. Why?

    A barcode scanner that was connected directly to the Mac's USB port stopped working as the "USB had too much power drawn", even though it has worked for over a year in that port.  When we plugged it into the port on the keyboard, the device works. Why?  Obviously the device is operational.  Could the USB port have burned out from having too much power drawn?  If so, is it reparable?

    It can't draw "too much" power, it can only draw as much as the USB port is able to provide and no more. IIRC, the keyboard port has a lower power output than the iMac's port.
    That being said, yea, it's possible that the port has failed and it can be replaced or if another port works you can use that one. Although if it is still under warranty or covered by Apple Care, then I would take it to an Apple Store or service provider to get the port repaired.

  • USB ports not working in safe mode

    I am trying to back up my computer before i take it to the apple store and i cant back up in safe mode using time machine, becuase im guess the USB ports arent working. Are there any solutions to this problem?

    Ok, where is this Intel driver? There is no such thing "program manager" so I am guessing you mean the Programs and features control panel, but on my machine that whole window is blank after a clean install. I still cannot get the USB ports to activate. Two fresh installs and several different USB sticks later and no luck.  Should I just give up and go to Windows 8.1?  I really need Windows 7 to work if at all possible. Other devices shows one USB controller without driver software so I suppose that's the culprit. There are other USB devices installed under the USB section of Device Manager, but they apparently have nothing to do with the USB ports themselves, just devices like the trackpad etc.  I've spent two hours on this so far and it's getting out of control.  Why doesn't this work with generic USB drivers?

  • G72-a40SA usb port not working

    Hi
    can anyone help me please?
    I have a HP G72-a40SA laptop running windows 7.
    The bios has been updated to the latest version.
    BUT, i cannot get one (out of three) usb ports to work. Its NOT being recognised by the PC.
    I have tried everything possible...... can anyone help me on this please...???
    Thanks

    It is only a piece a equipment; any part can break at any time. You may want to contact HP technical support and identify your options. These options will be based on your warranty status, and you can locate that information here: http://h20566.www2.hp.com/portal/site/hpsc/public/wc/home?ac.admitted=1383763792097.876444892.199480...
    Please call the number, closest to your region, which you can locate here: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
    Let me know if you have any further questions or concerns.
    Mario
    I worked on behalf of HP.

  • My itunes on windows7 pc does not recognize new ipad. using same cable and usb port that works for my ipod. what to do?

    My itunes on windows7 pc does not recognize new ipad. using same cable and usb port that works for my ipod. what to do?
    Thanks

    Have you updated iTunes with the absolute latest software?  If you have not in a long time, your iPad won't be recognized.

  • Msi gtx 760 2gd5/oc hdmi port dont work

    my hdmi port dont work but the dvi does...why is this any info please?

    where and how doesn't works?

Maybe you are looking for