HT1338 network become slow when using bluetooth.

I am using macbook pro retina display, my issue is, every time I turn my bluetooth on, the network become slow. anyone facing a same problem?

A lot of people were experiencing the same thing and reported it on the MacBook Pro forum. But that was when the rMBP first came out and I thought that the issue had been resolved with software/firmware(?) updates.
Are you running the very latest build of 10.8.2? With the supplemental updates as well?
Clinton

Similar Messages

Acrobat XI pro - Slow when using 'save as' or saving merged pdf

System:
Windows 7 pro 64-bit
AMD FX 6300 processor
HD 7770 1 GB video card
1 TB disk space
16 GB RAM
MS Office 2013 Plus
Adobe Acrobat XI Pro
Issue:
Saving pdf is very slow. Regardless if the location is a network location or desktop. Using the 'save as' option is also very slow. It's super slow when using the 'merge' option.
Troubleshooting:
- uninstalled adobe, rebooted system, reinstalled adobe, installed updates - no changes
- tried using optimize pdf option when saving- no changes
- ran adobe in compatiblity mode - no changes

All available updates have been applied/installed.

My MacBook Pro is running very slow when using the internet and sometimes gives the pinwheel of death, any suggestions on how to fix?

My MacBook Pro is running very slow when using the internet and sometimes gives the pinwheel of death, any suggestions on how to fix?

<http://www.thexlab.com/faqs/sbbod.html>

HP Photosmart 8750 prints slow when using Photo Gray Cartidge

HP Photosmart 8750 prints slow when using Photo Gray Cartidge ... sometimes indicates Black Cartridge failed, however upon reinserting works slow

Welcome to the HP Forums ButchG,
I see by your post that when printing with the photo gray cartridge the black cartridge will indicate that it has failed.
I can help you with this issue.
I would do a power reset to see if that will resolve the issue.
With the printer still turned on, disconnect the power cable from the back of the printer, if the printer has external power module with a detachable power cord disconnect it for 15 seconds and then reconnect it.
Hold down the power button for 10 seconds to drain the power.
Then disconnect the power cable from the wall outlet.
Wait 10 seconds and reconnect the power cable back to the wall outlet first, then the back of the printer and power it on again.
Make sure the printer is connected directly to wall outlet. (don't use a power hub or a surge protector)
I have provided a document for the cleaning the contacts and reseating the cartridge.
'Cartridge Failed' or 'Cartridge Not Compatible' Error Message.
What are the ink levels?
Are you using Genuine HP Cartridges?
Check the date on the cartridges to make sure they are still in warranty. (not old stock)
If you need further assistance, let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

My photos are sharp but become soft when used in and IDVD slide show.

My photos are sharp but become soft when used in and IDVD slide show. How can I prevent this from happining??

Hi,
I suggest that you try unchecking both of the crop options - landscape & portrait.
To re-create your situation, I had to check the crop for landscape pictures option.
I prefer to have control over any cropping so I tend to crop each image first before creating the slide show.
Brian

Network is lost when using GPS on 3GS

Network is lost when using GPS on 3GS.
ver. 5.1.1 (9В206)
model MC637RR
SN 86223J1DEDG
05.16.05.

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Error 80 when using bluetooth on car radio

error 80 when using bluetooth on pioneer car radio with my iphone 4 and 5

me too...did some digging on the internet and appears Error -80 means the car deck is expecting some bluetooth protocols that your iPhones wont give out. mine was intermittent for last couple years (deck is 12 years old) as of last night i just get error -80 everytime i try to dial out or recieve a call via bluetooth. this issue was intermittent with an iPhone 3G, 4, 4S, 5 and now my current 5S. im blaming Pioneer not Apple for this
I ended up buying a new deck for my car...gets installed tomorrow.

Query runs slower when using variables & faster when using hard coded value

Hi,
My query runs slower when i use variables but it runs faster when i use hard coded values. Why it is behaving like this ?
My query is in cursor definition in a procedure. Procedure runs faster when using hard coded valus and slower when using variables.
Can anybody help me out there?
Thanks in advance.

Hi,
Thanks for ur reply.
here is my code with Variables:
Procedure populateCountryTrafficDetails(pWeekStartDate IN Date , pCountry IN d_geography.country_code%TYPE) is
startdate date;
AR_OrgId number(10);
Cursor cTraffic is
Select
          l.actual_date, nvl(o.city||o.zipcode,'Undefined') Site,
          g.country_code,d.customer_name, d.customer_number,t.contrno bcn,
          nvl(r.dest_level3,'Undefined'),
          Decode(p.Product_code,'820','821','821','821','801') Product_Code ,
          Decode(p.Product_code,'820','Colt Voice Connect','821','Colt Voice Connect','Colt Voice Line') DProduct,
          sum(f.duration),
          sum(f.debamount_eur)
          from d_calendar_date l,
          d_geography g,
          d_customer d, d_contract t, d_subscriber s,
          d_retail_dest r, d_product p,
          CPS_ORDER_DETAILS o,
          f_retail_revenue f
          where
          l.date_key = f.call_date_key and
          g.geography_key = f.geography_key and
          r.dest_key = f.dest_key and
          p.product_key = f.product_key and
          --c.customer_key = f.customer_key and
          d.customer_key = f.customer_key and
          t.contract_key = f.contract_key and
          s.SUBSCRIBER_KEY = f.SUBSCRIBER_KEY and
          o.org_id(+) = AR_OrgId and
          g.country_code = pCountry and
          l.actual_date >= startdate and
          l.actual_date <= (startdate + 90) and
          o.cli(+) = s.area_subno and
          p.product_code in ('800','801','802','804','820','821')
          group by
          l.actual_date,
          o.city||o.zipcode, g.country_code,d.customer_name, d.customer_number,t.contrno,r.dest_level3, p.product_code;
Type CountryTabType is Table of country_traffic_details.Country%Type index by BINARY_INTEGER;
Type CallDateTabType is Table of country_traffic_details.CALL_DATE%Type index by BINARY_INTEGER;
Type CustomerNameTabType is Table of Country_traffic_details.Customer_name%Type index by BINARY_INTEGER;
Type CustomerNumberTabType is Table of Country_traffic_details.Customer_number%Type index by BINARY_INTEGER;
Type BcnTabType is Table of Country_traffic_details.Bcn%Type index by BINARY_INTEGER;
Type DestinationTypeTabType is Table of Country_traffic_details.DESTINATION_TYPE%Type index by BINARY_INTEGER;
Type ProductCodeTabType is Table of Country_traffic_details.Product_Code%Type index by BINARY_INTEGER;
Type ProductTabType is Table of Country_traffic_details.Product%Type index by BINARY_INTEGER;
Type DurationTabType is Table of Country_traffic_details.Duration%Type index by BINARY_INTEGER;
Type DebamounteurTabType is Table of Country_traffic_details.DEBAMOUNTEUR%Type index by BINARY_INTEGER;
Type SiteTabType is Table of Country_traffic_details.Site%Type index by BINARY_INTEGER;
CountryArr CountryTabType;
CallDateArr CallDateTabType;
Customer_NameArr CustomerNameTabType;
CustomerNumberArr CustomerNumberTabType;
BCNArr BCNTabType;
DESTINATION_TYPEArr DESTINATIONTYPETabType;
PRODUCT_CODEArr PRODUCTCODETabType;
PRODUCTArr PRODUCTTabType;
DurationArr DurationTabType;
DebamounteurArr DebamounteurTabType;
SiteArr SiteTabType;
Begin
     startdate := (trunc(pWeekStartDate) + 6) - 90;
     Exe_Pos := 1;
     Execute Immediate 'Truncate table country_traffic_details';
     dropIndexes('country_traffic_details');
     Exe_Pos := 2;
     /* Set org ID's as per AR */
     case (pCountry)
     when 'FR' then AR_OrgId := 81;
     when 'AT' then AR_OrgId := 125;
     when 'CH' then AR_OrgId := 126;
     when 'DE' then AR_OrgId := 127;
     when 'ES' then AR_OrgId := 123;
     when 'IT' then AR_OrgId := 122;
     when 'PT' then AR_OrgId := 124;
     when 'BE' then AR_OrgId := 132;
     when 'IE' then AR_OrgId := 128;
     when 'DK' then AR_OrgId := 133;
     when 'NL' then AR_OrgId := 129;
     when 'SE' then AR_OrgId := 130;
     when 'UK' then AR_OrgId := 131;
     else raise_application_error (-20003, 'No such Country Code Exists.');
     end case;
     Exe_Pos := 3;
dbms_output.put_line('3: '||to_char(sysdate, 'HH24:MI:SS'));
     populateOrderDetails(AR_OrgId);
dbms_output.put_line('4: '||to_char(sysdate, 'HH24:MI:SS'));
     Exe_Pos := 4;
     Open cTraffic;
     Loop
     Exe_Pos := 5;
     CallDateArr.delete;
FETCH cTraffic BULK COLLECT
          INTO CallDateArr, SiteArr, CountryArr, Customer_NameArr,CustomerNumberArr,
          BCNArr,DESTINATION_TYPEArr,PRODUCT_CODEArr, PRODUCTArr, DurationArr, DebamounteurArr LIMIT arraySize;
          EXIT WHEN CallDateArr.first IS NULL;
               Exe_pos := 6;
                    FORALL i IN 1..callDateArr.last
                    insert into country_traffic_details
                    values(CallDateArr(i), CountryArr(i), Customer_NameArr(i),CustomerNumberArr(i),
                    BCNArr(i),DESTINATION_TYPEArr(i),PRODUCT_CODEArr(i), PRODUCTArr(i), DurationArr(i),
                    DebamounteurArr(i), SiteArr(i));
                    Exe_pos := 7;
dbms_output.put_line('7: '||to_char(sysdate, 'HH24:MI:SS'));
     EXIT WHEN ctraffic%NOTFOUND;
END LOOP;
     commit;
Exe_Pos := 8;
          commit;
dbms_output.put_line('8: '||to_char(sysdate, 'HH24:MI:SS'));
          lSql := 'CREATE INDEX COUNTRY_TRAFFIC_DETAILS_CUSTNO ON country_traffic_details (CUSTOMER_NUMBER)';
          execDDl(lSql);
          lSql := 'CREATE INDEX COUNTRY_TRAFFIC_DETAILS_BCN ON country_traffic_details (BCN)';
          execDDl(lSql);
          lSql := 'CREATE INDEX COUNTRY_TRAFFIC_DETAILS_PRODCD ON country_traffic_details (PRODUCT_CODE)';
          execDDl(lSql);
          lSql := 'CREATE INDEX COUNTRY_TRAFFIC_DETAILS_SITE ON country_traffic_details (SITE)';
          execDDl(lSql);
          lSql := 'CREATE INDEX COUNTRY_TRAFFIC_DETAILS_DESTYP ON country_traffic_details (DESTINATION_TYPE)';
          execDDl(lSql);
          Exe_Pos:= 9;
dbms_output.put_line('9: '||to_char(sysdate, 'HH24:MI:SS'));
Exception
     When Others then
     raise_application_error(-20003, 'Error in populateCountryTrafficDetails at Position: '||Exe_Pos||' The Error is '||SQLERRM);
End populateCountryTrafficDetails;
In the above procedure if i substitute the values with hard coded values i.e. AR_orgid = 123 & pcountry = 'Austria' then it runs faster.
Please let me know why it is so ?
Thanks in advance.

Siri sounds bad when using Bluetooth

Siri sounds bad when using Bluetooth, but the phone calls sound great.

Can a few of you help me with a test? I have a Jawbone 2 & a Jawbone Icon. Both exhibit a strange behavior with my iPhone 4. If either of these headsets are on, paired & connected AND a call is answered or initiated, things are fine.
When it all goes downhill is in this scenario:
My headset is OFF. I receive or make a call and mid-call, I decide to turn on the headset (which I keep off to save battery). The Jawbone connects and automatically switches the iPhone from PHONE to JAWBONE. This is all normal right? Okay here's the problem. The call quality has static, sounds muffled and the caller tells me I sound like I'm in a tin can. If I then switch back to the phone (through the iPhone page of Sources) and then back again, to the Jawbone, most times--quality is back to normal. Obviously this is not something we all want to be doing. Can anyone do this test with their headset .. any brand and even some of you with Icons? It would be good to know if the culprit is the Bluetooth Headset or the iPhone. Remember, it's important that you make a call with your Bluetooth headset in the OFF position and then turn it on mid-call to use it.

When using bluetooth, siri says she can't make a call.

when using bluetooth, i say "call XXX", and siri says "calling XXX", but then says, "i can't make that call". works fine when not on bluetooth.

Hello there, Baxter530.
The following Knowledge Base article provides pretty extensive steps to troubleshoot Bluetooth on your iPhone:
iOS: How to troubleshoot Bluetooth connections
http://support.apple.com/kb/TS4562
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

HT1688 iOS7 and connecting calls when using Bluetooth device

After upgrading to iOS7, it takes a long time to connect a call when using Bluetooth in my car. Worse of all, when checking voicemail, the message does not come across the Bluetooth device even when audio device output is selected as Bluetooth device. Any solutions to this problem?

Hi, eklinck.
Thank you for visiting Apple Support Communities.
Sometimes closing all applications open in multitasking and power cycling the device can resolve the issue.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
However, if you are still experiencing the issue I have included the best troubleshooting article.
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/TS3581
Cheers,
Jason H.

Why is quicktime slower when using multiple mdat atoms

Hi,
I've been trying to generate a mov file and I noticed that the more mdat atoms I put in my mov file the more the file takes time to load on QuickTime, iTunes.
Even worst, on the iPhone the file takes more than 3 minutes to load.
If there are too many mdat atoms quicktime even says that the file is invalid ( error -2004 or -2002, I don't remember exactly).
Why is quicktime/iTunes slower when using multiple mdat atoms ?
Thanks,

Yeah! Problem solved: It's a QT issue.
Cause: Mac Update Software downloaded a faulty QT.
Solution: Download QT from Apple's QT site.
Great to have the Video back

Adobe is slow when using the reader

adobe is slow when using the reader; It is very slow when I give to another person

I am working in Windows 7.
I have a pdf with 1900 pages of maps. I am using adobe acrobat 10 standard and sampling adobe acrobat xI pro. When I click on links moving from each map takes about 8 secs. when I save the file and give to someone that is just using adobe reader the process takes 20 to 30 seconds to move.

IPhone 6 and 6 plus camera extremely slow when using flash

I have noticed that the iPhone 6 and 6 plus camera is extremely slow when using flash, it is definitely slower than iPhones 5 and 5s.
Any explanation/solution for this?

I Have done some more testing and it seems turning off HDR resolves the issue

Why number becomes slow when after formatting function is used?

When changing something at Numbers (table, font, colors, etc), it becomes slower. I don't understant why, as the PC is brand new...

Hi Nano,
How large is the table that you are formatting? Is there a way to separate your results (with formatting) in a small table *away* from your main data table?
Regards,
Ian.

HT1338 network become slow when using bluetooth.

Similar Messages

Maybe you are looking for