HT1338 None of the selected updates could be saved.

I keep getting this message when I try to update my software. It says I have no internet connection but I do.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list. Post the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Similar Messages

  • Admin gets the following message while trying to update software: None of the selected updates could be saved. A network error has occurred. Check your Internet connection, and then try again. Any suggestions?

    I'm the Adnin. just recently I tried to update system software (Lion OS). The following message was returned. None of the selected updates could be saved. A network error has occurred. Check your Internet connection, and then try again. but I have internet access )email, Safari, etc.). Any idea of what is happenening?

    The error may be at Apple's end rather than yours. It could also be due to corrupted files on your computer. Try deleting the following:
    /Home/Library/Preferences/com.apple.SoftwareUpdate.plist
    /Home/Library/Caches/com.apple.SoftwareUpdate/
    /Library/Preferences/com.apple.SoftwareUpdate.plist
    Restart your computer.

  • HT1338 when I try to update, I get a message that says none of the selected updates could be saved, you don't have permission?????? help.  I tried to restore my hard drive, but the restore tab does not light up

    I am having problem with updating my software, I get an error that says I do not have permission.  I tried to restore the system but it will not allow me to perform that task either

    Ah! The proverbial missing information. Then, CMD+R and reinstall Lion.

  • Keep getting error: None of the selected updates could be installed. An unexpected error occurred. Please help!

    Hey I am kind of new to this forum situation, but I keep trying to install software updates on my macbook for the last two weeks and the aforementioned error (None of the selected updates could be installed. An unexpected error occurred.) keeps resulting. I would download them straight from online, but I don't know which ones to download. What should I do?

    Bring up Software Update, and when it says it has updated software to download, click the button on the left bottom of the window, might say something like show details. That will open the box to show you exactly what would download. You can then visit the Apple download site at http://support.apple.com/downloads/

  • "None of the selected updates could be installed. An unexpected error occurred."

    Whenever I tried to update my softwares, It said: "None of the selected updates could be installed. An unexpected error occurred." I don't know how to update all the softwares. I cannot connect to my printers. And I think it's becasue of the software updates. Anyone can help me, please? Plus, how do I know what operating system I have?

    Then your friend really needs to clean it up, and give you only software which he is licensed to give.    He should read my FAQ*:
    http://www.macmaps.com/selling.html
    Without doing so, he probably has left have some gremlins of his own that cause problems.   Cleaning up a Mac for resale really means cleaning it up.

  • None of the selected updates could be installed.

    Installed Lion yesterday. Also installed the Java update.
    The software update feature on Lion is telling me to download updates for iTunes, HP printer stuff, etc.
    However after it finishes downloading i get the following message:
    "None of the selected updates could be installed." "Unexpected error"
    Any ideas? Its driving me nuts.
    Thanks,
    Alfonso

    I had the same problems, the only thing that worked for me, was to download the update, one by one. Odd I know, but I had problems with iWork Update 6, Remote client update, but when I did it one by one, they worked. However, iTunes 10.4 refuses to download what so ever, all I get is Installation Failed, see the manufacturer. Going to an Apple Store to see what the Geniuses can do.

  • Latest update returns error " None of the selected updates could be installed. The update could not be expanded, and may have been corrupted during downloading. The update will be downloaded and checked again the next time that Software Update runs."

    Latest update returns error " None of the selected updates could be installed. The update could not be expanded, and may have been corrupted during downloading. The update will be downloaded and checked again the next time that Software Update runs."

    Which latest update? Details get answers. Rather than using SU, DL and install from http://support.apple.com/downloads/.

  • My software will no longer update: "None of the selected updates could be installed.  An unexpected error occurred."

    Can anyone help me?  I have also been getting the kernal error about once a day...do I just need to upgrade my os?  I'm running 10.7.5.

    I believe all of McAffee was uninstalled.  I had a Genius Bar appointment yesterday and he made sure that it was all gone.  He also deleted the files that had downloaded in order to restart the software updates, re downloaded them all and it worked.  Didn't have a kernal panic all night...
    Until now...it's been on iPhoto...I'm not doing anything out of the normal, but it just keeps crapping out.  Here is the latest error report:
    Interval Since Last Panic Report:  146719 sec
    Panics Since Last Report:          6
    Anonymous UUID:                    1B6CBAEC-9E83-4BF3-9A23-073825CDD80E
    Tue May 14 12:52:20 2013
    panic(cpu 1 caller 0xffffff80002abab3): "pmap_pv_remove(0xffffff801348af80,0x5f0bc000,0x1e0a8d, 0x80000001e0a8d066): pv not on hash, head: 0xffffff801348af80, 0x5f0bc000"@/SourceCache/xnu/xnu-1699.32.7/osfmk/i386/pmap_internal.h:813
    Backtrace (CPU 1), Frame : Return Address
    0xffffff80e81d3cc0 : 0xffffff8000220792
    0xffffff80e81d3d40 : 0xffffff80002abab3
    0xffffff80e81d3de0 : 0xffffff80002abeca
    0xffffff80e81d3e20 : 0xffffff8000273c46
    0xffffff80e81d3f10 : 0xffffff8000274a3a
    0xffffff80e81d3f40 : 0xffffff8000548a82
    0xffffff80e81d3f60 : 0xffffff80005cde98
    0xffffff80e81d3fb0 : 0xffffff80002daa79
    BSD process name corresponding to current thread: iPhoto
    Mac OS version:
    11G63b
    Kernel version:
    Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
    Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
    System model name: MacBook5,1 (Mac-F42D89C8)
    System uptime in nanoseconds: 22277929786273
    last loaded kext at 7783069453506: com.apple.driver.AppleUSBCDCECMData          4.1.22 (addr 0xffffff7f8085f000, size 28672)
    last unloaded kext at 7910692335558: com.apple.driver.AppleUSBCDCECMData          4.1.22 (addr 0xffffff7f8085f000, size 20480)
    loaded kexts:
    ng.uds.netusb.controller          1.0.0d1
    com.apple.driver.iPodSBCDriver          1.6.0
    com.apple.filesystems.smbfs          1.7.2
    com.apple.driver.AppleUSBCDCACMData          4.1.22
    com.apple.driver.AppleUSBCDC          4.1.22
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AudioAUUC          1.59
    com.apple.driver.AppleMikeyHIDDriver          122
    com.apple.driver.AppleUpstreamUserClient          3.5.9
    com.apple.GeForce          7.3.2
    com.apple.driver.AppleHDA          2.2.5a5
    com.apple.driver.AGPM          100.12.75
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager          4.0.8f17
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleMikeyDriver          2.2.5a5
    com.apple.driver.AudioIPCDriver          1.2.3
    com.apple.driver.ApplePolicyControl          3.1.33
    com.apple.driver.AppleBacklight          170.2.2
    com.apple.driver.AppleMCCSControl          1.0.33
    com.apple.driver.SMCMotionSensor          3.0.2d6
    com.apple.driver.AppleSMCLMU          2.0.1d2
    com.apple.driver.ACPI_SMC_PlatformPlugin          5.0.0d8
    com.apple.driver.AppleLPC          1.6.0
    com.apple.driver.AppleUSBTCButtons          227.6
    com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.8f17
    com.apple.driver.AppleUSBTCKeyboard          227.6
    com.apple.driver.AppleIRController          312
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          33
    com.apple.iokit.SCSITaskUserClient          3.2.1
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCISerialATAPI          2.0.3
    com.apple.iokit.IOAHCIBlockStorage          2.1.0
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AirPort.Brcm4331          561.7.22
    com.apple.driver.AppleAHCIPort          2.3.1
    com.apple.driver.AppleUSBHub          5.1.0
    com.apple.driver.AppleEFINVRAM          1.6.1
    com.apple.nvenet          2.0.17
    com.apple.driver.AppleUSBEHCI          5.1.0
    com.apple.driver.AppleUSBOHCI          5.1.0
    com.apple.driver.AppleHPET          1.7
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleACPIButtons          1.5
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.5
    com.apple.driver.AppleAPIC          1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          195.0.0
    com.apple.nke.applicationfirewall          3.2.30
    com.apple.security.quarantine          1.4
    com.apple.security.TMSafetyNet          8
    com.apple.driver.AppleIntelCPUPowerManagement          195.0.0
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.2.1
    com.apple.iokit.IOUSBMassStorageClass          3.0.3
    com.apple.driver.AppleUSBCDCACMControl          4.1.22
    com.apple.kext.triggers          1.0
    com.apple.nvidia.nv50hal          7.3.2
    com.apple.driver.DspFuncLib          2.2.5a5
    com.apple.NVDAResman          7.3.2
    com.apple.iokit.IOSurface          80.0.2
    com.apple.iokit.IOSerialFamily          10.0.5
    com.apple.iokit.IOAudioFamily          1.8.6fc18
    com.apple.kext.OSvKernDSPLib          1.3
    com.apple.driver.AppleGraphicsControl          3.1.33
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.iokit.IONDRVSupport          2.3.4
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.driver.IOPlatformPluginLegacy          5.0.0d8
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.driver.IOPlatformPluginFamily          5.1.1d6
    com.apple.driver.AppleSMC          3.1.3d10
    com.apple.driver.AppleHDAController          2.2.5a5
    com.apple.iokit.IOGraphicsFamily          2.3.4
    com.apple.iokit.IOHDAFamily          2.2.5a5
    com.apple.driver.AppleUSBBluetoothHCIController          4.0.8f17
    com.apple.iokit.IOBluetoothFamily          4.0.8f17
    com.apple.driver.AppleUSBMultitouch          230.5
    com.apple.iokit.IOUSBHIDDriver          5.0.0
    com.apple.driver.AppleUSBMergeNub          5.1.0
    com.apple.driver.AppleUSBComposite          5.0.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.2.1
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.1
    com.apple.iokit.IO80211Family          420.3
    com.apple.iokit.IOAHCIFamily          2.0.8
    com.apple.iokit.IOUSBUserClient          5.0.0
    com.apple.iokit.IONetworkingFamily          2.1
    com.apple.iokit.IOUSBFamily          5.1.0
    com.apple.driver.NVSMU          2.2.9
    com.apple.driver.AppleEFIRuntime          1.6.1
    com.apple.iokit.IOHIDFamily          1.7.1
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          177.9
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.driver.DiskImages          331.7
    com.apple.iokit.IOStorageFamily          1.7.2
    com.apple.driver.AppleKeyStore          28.18
    com.apple.driver.AppleACPIPlatform          1.5
    com.apple.iokit.IOPCIFamily          2.7
    com.apple.iokit.IOACPIFamily          1.4
    Model: MacBook5,1, BootROM MB51.007D.B03, 2 processors, Intel Core 2 Duo, 2 GHz, 8 GB, SMC 1.32f8
    Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x029E, 0x434D5341344758334D314131303636433720
    Memory Module: BANK 0/DIMM1, 4 GB, DDR3, 1067 MHz, 0x029E, 0x434D5341344758334D314131303636433720
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.198.19.22)
    Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: ST95005620AS, 500.11 GB
    Serial ATA Device: MATSHITADVD-R   UJ-868
    USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24400000 / 2
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0x04600000 / 3
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06100000 / 2
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06110000 / 5

  • None of the selected updates could be installed.  You don't have permission

    I am trying to update my MacMini from 10.7.3 to 10.7.4 and I am not able to.  The user account I am trying to do it from is an admin account.  I currently have 4 other updates and I am not able to install any of them and they are listed below.
    Airport utility 6.1
    Digitial Camera Raw Compatability update 3.13
    iTunes 10.6.3
    Java for OS X 2012-004 1.0
    Here is a copy and paste from my Console install.log only trying to install the Airport Utility and Digital Camera Raw updates.  All others were doing the same as these.
    Jun 25 09:41:43 media-hub Software Update[43018]: JS: 10.7.3
    Jun 25 09:41:45 media-hub diskmanagementd[43030]: DM ->T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: inHostDiskUDS=0x108f85c20=disk0s2=Macintosh HD inWhatStr=RecoveryInfoBaseSystemVersion
    Jun 25 09:41:45 media-hub diskmanagementd[43030]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: did get booterRecoveryUDS=0x108f85ae0=disk0s3=Recovery HD
    Jun 25 09:41:46 media-hub diskmanagementd[43030]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: did mount nobrowse; MP=/Volumes/Recovery HD OMS=0x7fb388d08ce0
    Jun 25 09:41:46 media-hub diskmanagementd[43030]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: getting dict from file=/Volumes/Recovery HD/com.apple.recovery.boot/SystemVersion.plist
    Jun 25 09:41:46 media-hub diskmanagementd[43030]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: got dict (or NULL=will return err): oooInfoDict=0x108d26d40
    Jun 25 09:41:46 media-hub diskmanagementd[43030]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: did if-needed-best-effort unmount
    Jun 25 09:41:46 media-hub diskmanagementd[43030]: DM <-T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: retErr=0 outInfoDict={
                  ProductBuildVersion = 11D50;
                  ProductCopyright = "1983-2012 Apple Inc.";
                  ProductName = "Mac OS X";
                  ProductUserVisibleVersion = "10.7.3";
                  ProductVersion = "10.7.3";
    Jun 25 09:41:46 media-hub Software Update[43018]: JS: 10.7.3
    Jun 25 09:42:01 media-hub Software Update[43018]: JS: Connected printer: MANUFACTURER:Brother;MODEL:HL-4040CN series
    Jun 25 09:42:01 media-hub Software Update[43018]: JS: Printer Brother_Help does not require an update.
    Jun 25 09:42:11 media-hub Software Update[43018]: JS: Firmware is up to date.
    Jun 25 09:42:11: --- last message repeated 1 time ---
    Jun 25 09:42:11 media-hub Software Update[43018]: JS: 10.7.3
    Jun 25 09:42:11 media-hub Software Update[43018]: JS: model = Macmini3,1
    Jun 25 09:42:11 media-hub Software Update[43018]: JS: 10.7.3
    Jun 25 09:42:25: --- last message repeated 4 times ---
    Jun 25 09:42:25 media-hub Software Update[43026]: Acquired Lock: 501, 43018, 0
    Jun 25 09:42:25 media-hub Software Update[43026]: Releasing Lock: 501, 43018, 0
    Jun 25 09:42:47 media-hub installd[43022]: PackageKit: Failed to unarchive staged request at /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Staging/RequestKeyed
    Jun 25 09:42:47 media-hub Software Update[43018]: Calculated need 3795.233 MB; 55115.915 MB free; 55115.915 MB available with MTM reclaim
    Jun 25 09:43:02 media-hub installd[43022]: PackageKit: Failed to unarchive staged request at /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Staging/RequestKeyed
    Jun 25 09:43:02 media-hub Software Update[43018]: Calculated need 1468.331 MB; 55105.286 MB free; 55105.286 MB available with MTM reclaim
    Jun 25 09:43:02 media-hub Software Update[43026]: Acquired Lock: 501, 43018, 0
    Jun 25 09:44:49 media-hub installd[43022]: PackageKit: ----- Begin install -----
    Jun 25 09:44:49 media-hub installd[43022]: PackageKit: request=PKInstallRequest <2 packages, destination=/>
    Jun 25 09:44:49 media-hub installd[43022]: PackageKit: packages=(
                  "PKLeopardPackage <file://localhost/Library/Updates/041-4169/AirPortUtility.pkg>",
                  "PKLeopardPackage <file://localhost/Library/Updates/041-5518/RAWCameraUpdate3.pkg>"
    Jun 25 09:44:49 media-hub installd[43022]: PackageKit: Failed to unarchive staged request at /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Staging/RequestKeyed
    Jun 25 09:44:49 media-hub installd[43022]: PackageKit: Removing stale staged install
    Jun 25 09:44:49 media-hub installd[43022]: PackageKit: Install Failed: Error Domain=NSCocoaErrorDomain Code=513 "“PKInstallSandbox-tmp” couldn’t be removed because you don’t have permission to access it." UserInfo=0x10151c380 {NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp, NSUserStringVariant=(
                  Remove
              ), NSUnderlyingError=0x101522990 "The operation couldn’t be completed. Directory not empty"} {
                  NSFilePath = "/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp";
                  NSUnderlyingError = "Error Domain=NSPOSIXErrorDomain Code=66 \"The operation couldn\U2019t be completed. Directory not empty\"";
                  NSUserStringVariant =     (
                      Remove
    Jun 25 09:44:50 media-hub Software Update[43026]: Releasing Lock: 501, 43018, 0
    Jun 25 09:44:50 media-hub Software Update[43018]: Error: “PKInstallSandbox-tmp” couldn’t be removed because you don’t have permission to access it. (NSCocoaErrorDomain code 513)

    Ah! The proverbial missing information. Then, CMD+R and reinstall Lion.

  • I have a Os X Lion 10.7.4 software. i tried to update the software but it says,"None of the selected items could be installed,an unexpected error occurs."

    it keeps telling me this whenever i try to click the "sofware update". it downloads,and thereafter turns into the grey screen but gives me ,"non of the selected updates could be installed."

    Two things you can try.
    - Sign out of the App Store (in the Store menu)
    - Quit the App Store
    - In Finder - Go>Go to folder...  (or Apple-shift-G)
    - Paste in the following "~/Library/Caches/ "
    - It will take you to a folder.  Delete com.apple.appstore
    - Launch the App Store and test
    Try resetting the App Store.
    Reset       Learned from Old Toad

  • Unexpected error: None of the checked updates could be installed

    When attempting to update firmware, I get:
    unexpected error: None of the checked updates could be installed
    So, I go to the downloads section of the apple website and manually download and install it.
    However, when I run for updates, the same files show up to be downloaded.
    It's annoying, please help.

    If I´m not mistaken it means it´s not updated. maybe you could check these links to see if they´ll help you:
    http://support.apple.com/kb/HT1557?viewlocale=en_US
    http://discussions.apple.com/thread.jspa?threadID=1477590
    these are the links to updates:
    http://www.apple.com/downloads/macosx/apple/firmware_hardware/macproefifirmwareu pdate13.html
    http://www.apple.com/support/downloads/macbookproefifirmwareupdate14.html
    http://www.apple.com/downloads/macosx/apple/firmware_hardware/macbookproefifirmw areupdate151.html
    I remember reading somewhere that it´s best to have 1.0 before you upgrade to 1.3, maybe it works if you upgrade to 1.3, then 1.4 then 1.5.1
    tell me if you get any luck

  • Download updates for the lion and I read the writing could not save any of the selected updates. Why?

    why after Download updates for the lion 10.7 and I read the writing could not save any of the selected updates and I can't upgrade the software ?

    The only thing that worked for me was to boot in safe mode.
    Power down.  Then press power button and hold 'shift' key until grey screen with progress bar appears... Once booted and logged in just open safari and browse to applestore. 
    No trouble at all once I did this.
    Reminder: create full backup before you upgrade OS
    Hope it helps.

  • "The Selected Video could not be played" error after latest software update

    After the latest software update for the Apple TV I've come across an interesting problem that's driving me crazy.
    In a nutshell:
    - I can rent movies and watch them.
    - I can watch video podcasts.
    - I can watch TV shows purchased on iTunes and streamed from my mac
    - I can watch TV shows ripped by myself and streamed from my mac
    - I can watch movie trailers
    - I can watch YouTube videos
    - I can watch a movie purchased on iTunes that has been synched to the Apple TV
    - I can watch a movie ripped by myself that has been synched to the Apple TV
    - I CANNOT watch a movie purchased on iTunes but it's streamed from my mac
    - I CANNOT watch a movie ripped by myself that is streamed from my mac
    Whenever I'm trying to watch a movie streamed from the mac I get the following error message:
    "The selected video could not be played. The format was not recognized"
    These are movies I could watch perfectly well before the software update, and I could perfectly watch them streamed from the mac.
    Any clues as to what could be going on? Any help or hits will be greatly appreciated.
    Many Thanks,
    Julian

    I am having similar problems. Rolling Apple TV back to 2.0 fixes it, but then I deal with the 2.0 bugs.
    Basically, I've tried this three times so far: reset back to 2.0. Resync everything I can(I have about 500gb of video which is stored on a USB drive, but I selectively sync part of my library and all my music).
    I have about 40gb free on the 160gb ATV. Everything plays fine - synched music, synced video, streaming video. My types of video are:
    - iTunes purchased
    - Ripped using handbrake to h.264 standard stuff (plays fine on my iphone and computer)
    - downloaded h.264 "ipod compatible"
    - converted video using iSquint
    After upgrading to 2.0.2, initially everything plays fine. But the MOMENT I sync something new to the ATV, then it all falls to crap.
    - itunes purchases play fine (synced and streamed
    - iSquint converted videos play fine when synced, won't stream "The selected video could not be played" bs)
    - Handbrake rips can play if sync'ed, won't stream
    - downloaded ipod compatible will usually play and sync.
    Doesn't matter if they're movies or tv shows.
    *All of these played fine before the "upgrade" (some upgrade).* After the upgrade, and after the first post-upgrade sync, it falls apart.
    Talking to Apple support about this results in the usual BS. Unplug your ATV. Resync your purchases, We don't support third party software yada yada.
    All I know is, Apple broke something with 2.0.2. Either something to do with a USB drive access, or something to do with one of their stupid new flags in quicktime, or whatever. It needs to be fixed.
    Going back, once again, to 2.0 until this is recognized and fixed by Apple.
    Mark

  • VBAI - LabView interface error - "The selected inspection could not be loaded", "Inspection File Error"

    I have been programming/interfacing VBAI2012 and LV2011 for two years already.
    There is one very frustrating problem:
    - Sometimes after changing some codes in VBAI, and I switch to Inspection Interface (by clicking File->Switch to Inspection Interface), there would be error saying "The selected inspection could not be loaded"
    - and then there is NO WAY to know what is going on. It does not tell you where the error is. Its so frustrating, you changed a couple of things, and the you have error switching to Inspection Interface, but then you don't know what is causing the error.
    Is there any log file which I can check?

    Guys,
    I have resolved this issue and successfully installed and configured jive forums on my laptop.
    I have documented high level steps on my blog http://orafusionmiddleware.blogspot.com (Non revenue generating, only for knowledge sharing)
    Cheers,
    Sandeep

  • Trying to import a .mov file made with gotomeeting - no problems in past yet says No importable files -None of the selected files or folders can be imported. Change the selection and try again.  re-recorded 3 times and still not accepting HELP

    Trying to import a .mov file made with gotomeeting - no problems in past doing this. After 3 attempts recording the hour long video and trying to upload it to iMovie, it says No importable files -None of the selected files or folders can be imported. Change the selection and try again. What could the reason be?

    After much research and troubleshooting, GoToMeeting replied with the final answer: We do not support the uploading of recordings to editing software. If you are having issues uploading a recording, unfortunately, we do not have tools or steps to resolve this. It is not a supported feature. I am sorry for any inconvenience this may have caused you. 
    The no longer plan to support editing of recordings made with their software.  So, we are planning to find a new meeting provider.

Maybe you are looking for