HT1338 on my macbook my one button delete botton sound buttons and escape doesnt work i updated everything and it still doesnt work what do i do
on my macbook my one button delete botton sound buttons and escape doesnt work i updated everything and it still doesnt work what do i do
Unless somebody else has a micracle workaround I don't know. Probably get the phone in for repair since it has been living on borrowed time so far and now you absolutely must have a working button.
Similar Messages
-
Well I have a new macbook pro and there is a software update available and after i update it, it keeps asking for the same thing to update over and over again! What can be done?
The App Store version sometimes gives problems. As you can't install 10.8.4 from the App Store, download and install the Combo edition > http://support.apple.com/kb/DL1659?viewlocale=en_US&locale=en_US This edition will work and will update OS X to the most recent version, in that case, 10.8.4
-
I have MacBook with OS 10.5.8
Is there any way for me to install and run Keynote on this machine? ThanksWelcome to the Apple Support Communities
Keynote '09 is compatible with your computer, but you won't get the latest Keynote version running that version. As you have an Early 2008 MacBook, first I recommend you to update to Mac OS X Snow Leopard to get newer versions of all applications but without losing any applications > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard Make a backup before upgrading.
The DVD contains Mac OS X 10.6.3, so after upgrading, open > Software Update to update to 10.6.8. Then, you will get access to the App Store.
However, the Keynote version available in the App Store is only compatible with OS X 10.7.5 or newer, so now you have two options:
1. Upgrade to OS X Lion and purchase Keynote from the App Store.
2. Keep Mac OS X Leopard or Snow Leopard, and buy Keynote on a DVD in eBay or Amazon. Note that you won't be running the most recent Keynote version, but it doesn't mind (the latest version only adds iCloud support) -
Everything worked fine on my new ipad. After I upgraded to ios7 it still worked fine even if it looked very different. But Safari started acting strangely (it is starting the same thing on my iPhone 4s, too). Finally, it froze in state with no URL, no keyboard will come up, I can get Safari to close and start, but not actually function. I went into settings and deleted all the cookies, data, history, and so forth. Same state. I powered down the iPad and restarted. Same state. I tried a trick were I held down the button to bring up the power down stripe and then holding down the home button. Same state.
What can I do? Can I delete Safari and re-install it somehow? Should I take it to an Apple store?If powering down with hard reset (press and hold two buttons Power and home) will not give positive results follow that article
iTunes: Restoring iOS software - Support - Apple
before you do restore backup using that article
iOS: How to back up and restore your content - Support - Apple -
firefox 4 came on my computer thru an update. now i do not have my yahoo toolbar that has the refresh button the home button and the other buttons that are on yahoo tool bar. i want to use my yahoo toolbar and it says it isnt compatible with firefox 4... HELP!
fire fox does not have a refesh button it doesnt have a home button so i can access my homepage. i want that backAs Digital Persona have abandoned it, there will be no update to their extension. It may work with the Fingerfox (SE) extension - https://addons.mozilla.org/firefox/addon/fingerfox-se
-
I had not proceed to any software upgrades of the macbook or the time capsule. My other Mac book and my son PC work perfectly with the time capsule WIFI. The APPLE retailer (DARTY) don't find the root cause of this defect.
Any Idea ?I had not proceed to any software upgrades of the macbook or the time capsule. My other Mac book and my son PC work perfectly with the time capsule WIFI. The APPLE retailer (DARTY) don't find the root cause of this defect.
Any Idea ? -
i tried to restore the iphone In a windows pc and on a Mac. when i restored my iphone on the Mac the iphone worked 2 times then it happen again the same problem...
http://support.apple.com/kb/ts3694#error4000
Error 4000, 4005, 4013, 4014, and 4016
After you perform each step, try to restore your device.
Restart your computer.
Disconnect all your USB devices from your computer and connect to another USB port.
Use a different USB cable.
Uninstall third-party security software.
Try restoring using an alternate computer. -
I open the iPhoto and the software update prompt up, telling me to update to the latest version, so I did. After updating everything, I tried to open it again the same thing happen. So I went to the software update and click it the was a prompt up telling that the softwares are up to date. So what do I do?
Go to
http://support.apple.com/downloads/
Find and download the 9.1 updater. Run it. Then Run Software update again.
Regards
TD -
I upgraded Itunes about a month ago and since then It does not recognize my Ipod and then I tried to update again and it won't upgrade. The error message says it's on a unavailable network path not found. So I tried to get tech support they told me to delete and start over. I went through my control panel and it gave me the same network error and would not delete the software. I am beyond frazzeled over this. Please help.
Essentially 'b noir' is correct, it will be relating to the .msi file that is, for lack of a better word, screwed. It's a pretty long process in order to cleanly remove and redownload the correct file.
Not really a long process if you can hunt down a copy of the Windows Installer CleanUp utility. If you have that installed and working, then so long as you know which particular msi (or msis) are being complained about, you can get past the issue in most cases pretty quickly. For example, for an itunes.msi message see:
error message that I'm missing iTunes.msi.
There's some additional information in my notes on the bookmark about one possible complication requiring a bit more work. (I'm steadily building the additional info on advanced troubleshooting into bookmarks as I build my public Bookmarks, and eventually tag searches on my Bookmark tags should pull up advanced troubleshooting steps too.) -
Accept button instead of Install button when trying to reinstall iPhoto after Clean install
Hi All,
I recentely did a clean install for my Lion OS.
Everything works fine, except iPhoto was missing.
I opened the App Store app on the mac, and was able to successfully update GarageBand and iMove.
However, it didn't give me the option to update iPhoto as it did when I opened the mac out of the box.
I then went to the iPhoto page, and instead of "install" button I now have an "Accept" button.
When pressing on the accept button, I get the following error message:
"These apps have already been accepted.
"These apps were already assigned to your Apple ID and are available in your Purchases list."
iPhoto is neither present on the Purchases list nor in the update tab.
Will apprecaite suggestions.
Thank youHi Caroloine,
Thank you for your response.
I already have the 10.7.2 update. Doesn't help.
Also, the link you specifited is about downloading past purchases from iTunes Store, or the iPhone/iPad App store. I am trying to downloading iPhoto for the Mac from the Mac App Store (the App Store that is installed on the dock). I don't think it is the same stores.
After your suggestion though, just to be sure, I tried to seach iPhoto (for Lion) on the iTunes Store, but I don't think you can buy it there. It just give you iPhono/iPad results when searching for iPhoto, and I couldn't find iPhoto in any preveriously purchased list on itunes.
Any other suggestions? -
I keep on getting E-mails that notifies me that my storage is almost full. I don't want to press that button until my question has been answered.
It will delete the entire backup, so you'll have to back up again after doing this. The new backup will only contain the apps (and other data) that you have selected and omit the ones you turned off.
-
I have macbook without a firewire port, I have usb 2.0 port, now my os is not working I can not get through apple logo loading , I can not enter safe mode, I can only enter one user mode, how can I backup my data, I have very important data in my hdd
Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc. -
I have 3 emails address also running through mail, a Gmail account, live.com.au account and an icloud.com account. Every time I open my email on a different device all old emails I have previously deleted on another device still remain, I would like to be able to load my mailboxes with the latest changes still there is what I guess I am saying. Is there anyway of doing this?
CheersYou need to set up all email accounts as a IMAP. Then, they will all be "in sync."
You cannot do this with POP accounts.
You should be able to change Gmail to IMAP, but I don't know about live mail. -
External Monitor on Macbook Pro freezes after deleting old profiles
Environment:
15 inch MacBook Pro, Mid 2010, 2.4 GHz, 8GB, NVIDIA GeForce graphics
Yosemite 10.10.1
External Monitor: Samsung SyncMaster 245T running in Extended Mode with the laptop
I have been using the above setup for several years with no issues. Yesterday I did a calibration of the external SyncMaster monitor with Datacolor Spyder3 as I have done many times in the past. The calibration was saved, but an error message flashed by before the file was saved. Checking with the ColorSync utility, the new saved colorspace appeared somewhat smaller than the last one.
I noticed that I had too many old profiles from previous calibrations still there, so I tried cleaning the directory up. I opened System Pref/Display/Color, clicked on an unwanted profile and delete the profile, and reset it to the profile that I wanted. Repeated this a few times and the SyncMaster appeared to be good.
Now I tried the same with the Macbook. Fine, deleted a few profiles but something now messed up the SyncMaster. It colors, including the dock, contorted to an ugly mess. Cursor changed to a spinning wheel, and I could not click or select anything either on the SyncMaster or the Mac. Rebooted, pulling the Syncmaster adapter out of the mac. Everything good, until I plug the Syncmaster back in, and I am back to the spinning wheel.
There must be some way to uninstall, re-install the Syncmaster?
How can I resolve this?
Any help would be much appreciated. Thank you.Aha, all is good.
I went to Library/ColorSync/Profiles/Displays
and to home/Library/ColorSync/Profiles/Displays
and deleted all SyncMaster.icc files. I did leave behind one SyncMaster file in the home/../Displays which had an old date and I new was ok.
Rebooted, plugged in SyncMaster, and a new icc file was automatically created in the /Library/../Displays folder.
My display works normally, now. -
three of my apps on my ipad keep crashing i just went to bed nd the next morning i went to use one them and it kept crashing i restarted my ipad i deleted and redownloaded the apps i updated my ipad and those three apps are still crashin. i think its something wrong with my ipad but idk what
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
iOS 7: Help with how to fix a crashing app on iPhone, iPad (Mini), and iPod Touch
http://teachmeios.com/help-with-how-to-fix-a-crashing-app-on-iphone-ipad-mini-an d-ipod-touch/
Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Delete the app and redownload.
Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
http://support.apple.com/kb/ht2519
Cheers, Tom
Maybe you are looking for
-
Use of MR11 Transaction - GR/IR Clearing
Hi, If we use Trnasaction MR11 transaction for clearing pending GR/IR will it affect to material stock account? Can any one explain me in what case it affects to stock account? Regards, Deepak
-
Hi, problem in maping. i mapped all elements.i could not mapped one element. Deletionflag value mapped with decription. hear we used valumapping. The requirement is If delete flag is on à u201Cstatus = Inactiveu201D else u201Cstatus = activeu201D
-
Using existing .Mac pages in iWeb to personal domain
I've tried to find a way to take my existing .Mac pages and move them to my new domain. I made these pages way back when .Mac first started. Does anyone know if it's possible to bring in your existing .Mac pages, then change them to a personal domain
-
How do I open a book from my Kobe reader
The book in my kobo app says to sign in Adobe but there is no option.
-
IOException on httpURLConnection.getInputStream();
Hello ! I have written some code to transfer a HTTP Request received on a servlet... but I'm catching an IOException when getting inputstream at the end.... I though that adding a setDoInput(true) would solve the problem but the code stops on it inst