HT1338 sending of mail takes more than than other mail accounts

Got a new mac pro, and made an yahoo.account on the mail.
When im sending mails with pictures, it takes a lot of time than usual .
It was set ut as the apple mail usual sets up. Very easy-

I know nothing about networks and all the techs involved. I only have a modem, airport extreme and I use at&t as a DSL provider.
When I send an email, while sending, if I click on connection doctor it shows "connecting..." during that 30 seconds period. If I send another e-mail immediately after, it goes fast.
What makes me believe the problem it's about Mail is that it works fine with another software (Eudora) in my Macbook, and also with a PC. I tried another Macbook with Mail and the problem persists. This is not a big issue, but it is not normal. I will try the new Snow Leopard and hope that will fix the problem.
Thanks for your attention.

Similar Messages

  • When i try to send a message to more than 1 person it tries to go out and comes up in the blue box but is not delivered?

    When I try to send a message to more than one person it tries to go out and comes up in the blue box but is not delivered. I phone 4s?

    Hello blee136,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Best of luck,
    Mario

  • I have been using USB 2.1 10/100M ethernet adaptor. But it takes more than 15 mins to detect network interface. What should I do. I am not using apple's company adaptor. It's local company.

    I have been using USB 2.1 10/100M ethernet adaptor. But it takes more than 15 mins to detect network interface. What should I do. I am not using apple's company adaptor. It's local company.

        jsavage9621,
    It pains me to hear about your experience with the Home Phone Connect.  This device usually works seamlessly and is a great alternative to a landline phone.  It sounds like we've done our fair share of work on your account here.  I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you.  I look forward to speaking with you.
    TrevorC_VZW
    Follow us on Twitter @VZWSupport

  • TS3276 Cannot send an email to more than 9 contacts?

    Unable to send an email with more than 9 contacts.  Get the following issue -
    The server response was: #4.5.3 Too many recipients.
    The email will send on ipad/iphone but doesnt on imac using both apple mail & air mail?
    Imac has Maverick installed.
    Any suggestions? Thanks

    Is the info in this link hat you are looking for: http://email.about.com/od/emailnetiquette/a/cc_and_bcc.htm ?

  • Sending an email with more than 75  characters

    Please can you tell me, how i can send an email with more than 75 characters from a workflow. We need to send a link which has more than 130 characters.

    Hi Benjamin,
    You have a couple of options:
    Put your link into a container element and put that into your text instead of hardcoding it.
    Instead of the sendmail step, create a task based on SELFITEM.SENDTASKDESCRIPTION. This is exacly the same as the mail step minus the 'different' step editor in the builder. There you can create the text using the sapscript editor and join lines up.
    Have a look around OSS, there are some notes on this issue.
    Cheers
    Mike

  • [OIM] Resources search takes more than 10 minutes

    Hi everyone,
    I have several resources (more than 6,000), and I have the following problem:
    1) I go to Request -> Resources
    2) select a user.
    3) in the notification screen, I left the send notification checked and click on next.
    After the last next, the resources screen should appear. It takes more than 10 minutes. I am uploading more resources and I see that as I add more, the time of searching the resources increases linearly with the ammount of resources.
    Is there a way of putting some filter for this search so it takes less time, or I have to make a custom app for requesting resources?
    Thanks!

    I think the application does too much validations in these kind of searches. I noticed that until 9.1.0, the Organization lookup in the Users -> Create User showed all possible results, but in 9.1.0.2 you will see that it shows nothing, you have to enter a search filter so organizations appears. Perhaps it's the solution to these problems, that all sarches show nothing at the first time and then you filter the results.
    I opened the war, but the code for searching appears to be generic to all search pages, so I think it's very dangerous to change the OIM core.

  • When I close my iPhone and I want to open it to use it again, the opening process takes more than an hour, I regretted to buy the iPhone because of this problem that you do not suffer at all with Nokia,how I can solve this problem?

    When I close my iPhone and I want to open it to use it again, the opening process takes more than an hour, I regretted to buy the iPhone because of this problem that you do not suffer at all with Nokia,how I can solve this problem?

    mostafa182 wrote:
    ... how I can solve this problem?
    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • Splitting an event takes more than 3 min

    Hi,
    I have about 8.000 photos in my library and 2.500 photos in a single event. Now I want to extract a set of pictures from this event and move it in a new event. Is there a faster way doing this than splitting the event before and after the set of pictures? This created 3 events and then I have to move the 3rd event back into the first, the 2nd event is what I want to keep.
    BTW, with over 8.000 pictures in the library, is it normal that splitting an event takes more than 3 minutes?

    Danielle
    Flag the pics you want to move to the new Event and the go Events -> Create Event from Flagged Photos. That will probably be faster.
    BTW, with over 8.000 pictures in the library, is it normal that splitting an event takes more than 3 minutes?
    I wouldn't have thought so, but it might take a while with an Event that has more that 2,500 pics in it. Remember, Events in the iPhoto Window correspond exactly with the Folders in the Originals Folder in the iPhoto Library package file (Right click on it in the Pictures Folder -> Show Package Contents). So splitting an event literally means creating a folder and moving files to it and so on.
    Regards
    TD

  • I used scripting brigde to add a movie that has size bigger than 5GB, exactly after two minutes iTunes return a failed, but the processing of the file is actually added to iTunes Library successfully. The copying take more than 5 minutes to complete. Why?

    I used scripting brigde to add a movie that has size bigger than 5GB, exactly after two minutes iTunes return a failed, but the processing of the file is actually added to iTunes Library successfully. The copying take more than 5 minutes to complete. Why the iTunes Scripting Brigde returned failed when it is actually success? It occurred exactly 2 minutes after submit the request to Scripting Brigde. Is this 2 minutes related to the Apple Event time out? if it does, how do I get around this problem? thx

    I can tell you that this is some of the absolutely worst customer service I have ever dealt with. I found out from a store employee that when they are really busy with calls, they have third party companies taking overflow calls. One of those companies is Xerox. What can a Xerox call center rep possibly be able to authorize on a Verizon account?  I'm Sure there is a ton of misinformation out there due to this. They don't note the accounts properly or so everyone can see them. I have been transferred before and have asked if they work for Verizon or a third party also and was refused an answer so, apparently they aren't required to disclose that information. I spent a long time in the store on my last visit and it's not just customers that get the runaround. It happens to the store employees as well and it's beyond frustrating.

  • MacBook pro takes more than 10 minutes to start with ML ?

    My Macbook pro takes more than 10 minutes to start. I press Start and it takes more than 10 minutes before I can enter my password. Need your help !

    Sounds like time for a PRAM reset. Here's how:
    1. Power down the machine.
    2. Locate the following keys on your keyboard in preparation for Step 4:
    ‘command’ – ‘option’ – ‘P’ – ‘R’
    3. Press the ‘power on’ button.
    4. Immediately – and before the grey screen appears – hold down ‘command-option-P-R’ all together.
    5. Keep them held down until you’ve heard the start-up chime twice. After you release them you should hear it again, and hopefully your Mac will boot up as normal.

  • I am having the  problem . it says it shouldnt take more than 3 minutes then i get this message Could not activate iphone. i have taken the sim card out and put it back in even then its of no use. if any one out there can help us it would be very nice

    i am having the  problem in my 3gs iphone. it says it shouldnt take more than 3 minutes then i get this message Could not activate iphone.
    i have taken the sim card out and put it back in even then its of no use.
    if any one out there can help us it would be very nice of them. thank you for your time.

    I can not get to iPhone screen, so no way to get to Settings. That is the problem. When I connect phone to iTunes I get screen asking to insert SIN card. On the phone I'm getting Cinfigure screen asking Launguage , Country or Region, Wi-Fi, ( I can connect to my home wi-fi), and last screen "Activating your iPhone". After two minutes of waiting IM getting message: Your iPhone could not be activated because the activation server in temporary unavailable. try connecting to iTunes or try later or contat apple.com/support.
    Like I mention, I went to Bell as well Rogers store and tried to insert active SIM card with no results.
    Yes, my friend unlock the phone to use with Rogers but I don't know where

  • How to make an indicator takes more than one input

    Hello,
    I want to know how to make an indicator ( like gauge for example) response to more than one case strrcuture result. In other words, how the indicator can take more than one input and move based on different input values ( the arrow of the gauge moves to different angles basesed on the logic structure and not only to one degree).
    Thanks in advance,
     

    YES, you got it right Coastal !
    This is what i want to do,
    I dont know how to establish this output in the software, i am still learning LabVIEW.
    I put a merge block to join the outputs but it didnt work.
    check it in the attached VI file.
    I am sure it is an easy thing but I dont know how to implement it.
    Any help you provide is appreciated,
    Best wishes 

  • Is it normal if it takes more than 5 hrs to download and process ios 5 and backup in itunes (syncing)

    is it normal if it takes more than 5 hrs to download and process ios 5 and backup in itunes (syncing)

    Hi Thaimic,
    Thanks for your reply.
    IP Adddress: 192.168.0.101
    Subnetmask: 255.255.255.0
    Router: 192.168.0.7
    DNS: 180.168.255.118, 192.168.1.1
    These are my WLAN details.under DHCP and BootP. Could you please tell me what to do with the DNS ? I do not have idea about the DNS.

  • When I restart my Mac, the grey screen appears like usual. But it takes more than 40 minutes (more) for it to load to finish restarting the Mac. What should I do?!

    When I restart my Mac, the grey screen appears like usual. But it takes more than 40 minutes (or more) for it to load to finish restarting the Mac. What should I do to fix it?!

    Disconnect all devices from your computer if you have not already done so.  Restart again.  If the problem has been resolved, you had a peripheral conflict.  You will then have to reconnect the devices one at time, restart,  to locate the culprit.
    Login Items is another culprit.  Check your login items.
    System Preferences>Accounts>Login Items
    Delete/disable all you do not need or want.

  • Is it true that iPhone 4s does not allow to take more than 1000 photos?

    Hi!
    Is it true that iPhone 4s does not allow to take more than 1000 photos?
    http://dolboeb.livejournal.com/2299939.html

    Not true.
    Only Photostream is allowed to take a max of 1000 photos, then they will be removed from server/icloud.

  • RMAN archive backup takes more than 1 hour.

    Hello,
    We execute the following command from HP Data Protector 5.50 in order to backup archives from an Oracle 8.1.7 database running in HP-UX 11.00:
    run {
    allocate channel 'dev_0' type 'sbt_tape'
    parms 'ENV=(OB2BARTYPE=Oracle8,OB2APPNAME=inf,OB2BARLIST=Oracle_Archivers_Inf)';
    allocate channel 'dev_1' type 'sbt_tape'
    parms 'ENV=(OB2BARTYPE=Oracle8,OB2APPNAME=inf,OB2BARLIST=Oracle_Archivers_Inf)';
    allocate channel 'dev_2' type 'sbt_tape'
    parms 'ENV=(OB2BARTYPE=Oracle8,OB2APPNAME=inf,OB2BARLIST=Oracle_Archivers_Inf)';
    sql 'alter system switch logfile'
    sql 'alter system archive log current'
    backup
    filesperset 1
    format 'Oracle_Archivers_Inf<inf_%s:%t:%p>.dbf'
    archivelog until time 'SYSDATE-2'
    delete input;
    backup
    filesperset 1
    format 'Oracle_Archivers_Inf<inf_%s:%t:%p>.dbf'
    archivelog all;
    This process takes more than 2 hours for just 3 GB and we don't think this is network issue.
    Is our RMAN command doing more thinks than just archives backup?
    Almost at the end of backup we get following message:
    Default exp binary /INF/oracle/app/product/8.1.7/bin/exp/ is used for catalog export.
    Does this message mean an export is done at the end of archive backup?
    Note that message belongs it is more than 2 hours later.
    Thanks in advance for your help.
    Regards,
    Carles

    Yes, it appears one of your utilities is doing an export backup, check HP Data Protector settings.
    -- and/or -- you are having tape problems: ... type[b] 'sbt_tape'

Maybe you are looking for

  • Overpayment from Customer

    Hello All, Please can you suggest why we are seeing the following. A customer paid an overpayment of 109 dollars, the actual invoice amount was for 1000 dollars but the customer paid 1109 dollars. While processing the payment via F-28 from the custom

  • BADI to get characteristics of class in classification tab at MM01 / MM02.

    Hi all,          Is there any user exit or BADI to get all characteristics entered at the classification tab while creating or changing a material (MM01/MMO2) before saving. Regards, Chinna

  • BW -  Can Wild Carding be done  with Variables or what ?

    Hello All, Topic is "Can Wild Carding be done in BW" ? Need direction and solutions to this question. My definition is the abiliy to select key data within a  characteristic to generate a report. The data can be any part of the characteristic. An exa

  • Oraext:parseEscapedXML  in xsl of  Transform Activity

    Hi, oraext:parseEscapedXML is not working in xsl of a Transform Activity. But the same thing works in Assign activity In xsl: <xsl:value-of select="oraext:parseEscapedXML('<person><name>sreeny</name></person>')"/> returns "sreeny" (It returning only

  • Setting up authentication using IAS and an AP1200

    I'm trying to get RADIUS authentication working using Windows 2003 IAS and an AP1200, client is an AIR-CB21AG with latest drivers (2.1). Can anyone point me to a "how to" guide or advise how to configure each component to get it all working? Thanks i