HT1338 Silverlight on MAC MINI to run Redbox Instant?

1. Silverlight on MAC MINI to run Redbox Instant?

Are you asking a question?
If the question is "How do I get Microsoft Silverlight" then you can download it here:
http://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx

Similar Messages

My mac mini is running super slow

My mac mini is running super low. It has been for a long time. All applications work but it take so long to do anything. The mac mini is mid 2010. It can not run several application at the same time.
Problem description:
my system is running super slow
EtreCheck version: 2.0.11 (98)
Report generated November 10, 2014 at 11:22:00 AM EST
Hardware Information: ℹ️
Mac mini (Mid 2010) (Verified)
Mac mini - model: Macmini4,1
1 2.4 GHz Intel Core 2 Duo CPU: 2-core
2 GB RAM Upgradeable
BANK 0/DIMM0
1 GB DDR3 1067 MHz ok
BANK 1/DIMM0
1 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 320M - VRAM: 256 MB
Cinema Display 1680 x 1050
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 4:54:26
Disk Information: ℹ️
Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 318.88 GB (122.41 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 319.21 GB Online
HL-DT-STDVDRW GA32N
USB Information: ℹ️
HP Wireless Optical Mobile Mouse
HP Photosmart 6510 series
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Wondershare AllMyMusic.app
[not loaded] com.Perfect.Driver.SystemAudioRecorder (1.0.0 - SDK 10.6) Support
/System/Library/Extensions
[not loaded] com.Belcarra.iokit.USBLAN_netpart (3.1.1 - SDK 10.6) Support
[not loaded] com.Belcarra.iokit.USBLAN_usbpart (3.1.1 - SDK 10.6) Support
[not loaded] com.RemoteControl.USBLAN.usbpart (3.1.1 - SDK 10.7) Support
[not loaded] com.bose.bluetooth (1.0.0) Support
[not loaded] com.motorola-mobility.driver.MotMobileUSB (1.1.0) Support
/System/Library/Extensions/2.2.0/Belcarra.USBLAN_netpart.kext/Contents/Plug-Ins
[not loaded] com.belcarra.iokit.netpart.panther (1.6.3) Support
/System/Library/Extensions/2.2.0/Belcarra.USBLAN_usbpart.kext/Contents/Plug-Ins
[not loaded] com.belcarra.iokit.usbpart.panther (1.6.3) Support
/System/Library/Extensions/2.2.0/RemoteControl.USBLAN_usbpart.kext/Contents/Plu g-Ins
[not loaded] com.RemoteControl.USBLAN.panther (1.6.2) Support
/System/Library/Extensions/MotMobileUSB.kext/Contents/PlugIns
[not loaded] com.motorola-mobility.driver.MotMobileMS (1.0.0) Support
Problem System Launch Agents: ℹ️
[failed] com.apple.AirPlayUIAgent.plist
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.cmfsyncagent.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.EscrowSecurityAlert.plist
[failed] com.apple.printtool.agent.plist
[failed] com.apple.recentsd.plist
[failed] com.apple.sbd.plist
[failed] com.apple.security.cloudkeychainproxy.plist
[failed] com.apple.spindump_agent.plist
[failed] com.apple.telephonyutilities.callservicesd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.awdd.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.icloud.findmydeviced.plist
[failed] com.apple.ifdreader.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.nsurlsessiond.plist
[failed] com.apple.softwareupdated.plist
[failed] com.apple.tccd.system.plist
[failed] com.apple.wdhelper.plist
[failed] org.cups.cupsd.plist
Launch Agents: ℹ️
[loaded] com.adobe.CS4ServiceManager.plist Support
[loaded] com.hp.help.tocgenerator.plist Support
Launch Daemons: ℹ️
[failed] com.adobe.fpsaud.plist Support
[loaded] com.adobe.versioncueCS4.plist Support
[loaded] com.hp.lightscribe.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
[invalid?] com.nds.pcshow.plist Support
[invalid?] com.nds.pcshow.uninstall.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items: ℹ️
iTunesHelper UNKNOWN (missing value)
Wallpaper Wizard Lite UNKNOWN (missing value)
iTunesHelper UNKNOWN (missing value)
SpeechSynthesisServer Application (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
CFAgent ApplicationHidden (/Applications/Clickfree/CFAgent.app)
HP Product Research Application (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
Internet Plug-ins: ℹ️
LogMeInSafari64: Version: 1.0.660 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.1.4 Support
AdobePDFViewerNPAPI: Version: 11.0.04 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
LogMeIn: Version: 1.0.660 Support
Silverlight: Version: 5.1.20125.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
LogMeInSafari32: Version: 1.0.660 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 11.0.04 - SDK 10.6 Support
CouponPrinter-FireFox_v2: Version: Version 1.1.6
GarminGpsControl: Version: 4.0.1.0 Release - SDK 10.6 Support
SharePointBrowserPlugin: Version: 14.0.0 Support
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User Internet Plug-ins: ℹ️
SlingPlayer: Version: (null) Support
3rd Party Preference Panes: ℹ️
Adobe Version Cue CS4 Support
Flash Player Support
Flip4Mac WMV Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      14% nsurlsessiond
      11% cloudd
      6% WindowServer
      2% bird
      2% coreduetd
Top Processes by Memory: ℹ️
75 MB QuickLookSatellite
69 MB com.apple.iTunesLibraryService
45 MB mds_stores
41 MB discoveryd
32 MB WindowServer
Virtual Memory Information: ℹ️
27 MB Free RAM
511 MB Active RAM
506 MB Inactive RAM
516 MB Wired RAM
12.30 GB Page-ins
631 MB Page-outs

Upgrade the memory to the max of 8 GB.
Also this two processers
      14% nsurlsessiond
      11% cloudd
are associated with iCloud/iCloud drive and should decrease after the iCloud drive is fully populated

My wife and i both have an itunes library installed on to our separate pc's, we are now de-commissioning the pc's and are moving over to a single mac mini, can we install both libraries on to the mac mini and run them as separate libraries?

my wife and i both have an itunes library installed on to our separate pc's, we are now de-commissioning the pc's and are moving over to a single mac mini, can we install both libraries on to the mac mini and run them as separate libraries?

graham218 wrote:
are moving over to a single mac mini, can we install both libraries on to the mac mini and run them as separate libraries?
Generally YES.
It's possible to hold separate iTunes library's on a single machine.
Generate two new folders inside the Music folder of the Mini and name them differently; e.g. man and woman.
Copy your whole library into "man" and your wifes into "woman"
Go to sharing in the system settings of the Mini and share the Music folder in your network.
After copying the whole library's to the Mini you may point iTunes to the new location at startup by holding the option key (alt) at the keyboard.
iTunes will then ask you where the library is located.
Point it to the matching library on the Mini.
That's all.
Lupunus
PS ... If you both use only the Mini you have to setup a user account for each and just copy the whole library to the Music folder in particular.
Message was edited by: lupunus

My mac mini is running very slow all of a sudden, how can i restore it's speed?

my mac mini is running very slow all of a sudden, how can i restore it's speed?

This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running a program at the instance of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait about a minute. Then paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
clear; shopt -s extglob; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='User %s%%\t\tSystem %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; R () { o=; [[ r -eq 0 ]]; }; Pm () { [[ "$o" ]] && o=`sed 's/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pc () { o=`egrep -v '^[[:blank:]]*($|#)' "$2"`; Pm "$1"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o="${o##+( )}"; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=`system_profiler SPDiagnosticsDataType | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`pmset -g therm | sed 's/^.*CP/CP/'`; grep -q 'No th' <<< "$o" && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; o=`ls /L*/L*/Dia*/*.panic | wc -l`; Ps "Panics"; o=`ls /L*/L*/Dia*/*.c* | tail`; Pm "System crash logs"; o=`ls L*/L*/Dia* | tail`; Pm "User crash logs"; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""; print}'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; [[ o -lt 5120 ]] && Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 90 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Pm "Total CPU usage" && s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process $s of user ${s[1]}"; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process $s of user ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; for d in {/,}L*/{La,Priv,Sta}*; do o=`ls -A "$d" | egrep -v '^(\.DS_Store$|com\.apple\.)'`; Pm "$d"; done; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print`; Pm "Unsigned shared libraries"; o=`launchctl getenv DYLD_INSERT_LIBRARIES`; Pm "Inserted libraries"; o=`find {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep :`; Pm "Profiles"; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(egrep -v '(local|broadcast)host' /etc/hosts); Pc "User launchd" ~/.launchd; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist ! -exec sh -c 'plutil -s "$1" >&-' {} {} \; -print`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in {0..1}; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} files"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important.
If you're not logged in as an administrator, you won't be prompted for your password. The test will still run. It just won't do anything that requires administrator rights.
The test may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. There is no indication of progress until it's done. Wait for the line "[Process completed]" to appear in the Terminal window. If you don't see that line within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." That's because the forum software falsely identifies something in the post as a violation of the terms of use. If that happens, please post the results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?

My first post to the Apple Support Community so it looks like all I wanted to know is covered in the title. The research I have done led me to solutions that I am not comfortable trying for fear of irreparably damaging my keyboard and/or Mac mini. Does anyone have a simpler solution? Please? Hellooooo?
Just in case the title is too long to show, I have re-pasted here:
The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?

BDAqua wrote:
Hello & welcome to the Forums!
I think Spark cured this for another person and the same problem...
http://www.shadowlab.org/Software/spark.php
http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&id=ukelele
http://doublecommand.sourceforge.net/
Thank you for the response. Unfortunately, I could not figure out how to work the above applications. I thought that i had managed to assign the appropriate function keys in Spark to their volume counterparts, but it had no effect. Below is a screen shot. Do you see anything amiss?

USB Ethernet Adapter Stopped Working On Mac Mini Server Running 10.6.6

Is anybody out there successfully using the Apple USB Ethernet adapter on a Mac Mini Server running 10.6.6? They have stopped working for me.
The boot disk in the 2009 Mac Mini Server in my classroom failed and after Apple replaced the disk and I reinstalled SLS and ran Software Update to bring the machine up to 10.6.6 the USB Ethernet adapter that was the interface to the outside world no longer recognized when a cable was plugged in. The cable was good and worked just fine if plugged into another machine or the built-in interface. At first I thought that the USB Interface had failed but after trying two new ones (graciously exchanged by Apple) and finding that none of them worked I'm coming to the conclusion that perhaps the warning on the package that the USB Ethernet only works with the MacBook Air finally became true.

Douglas Urner wrote:
Is anybody out there successfully using the Apple USB Ethernet adapter on a Mac Mini Server running 10.6.6? They have stopped working for me.
The boot disk in the 2009 Mac Mini Server in my classroom failed and after Apple replaced the disk and I reinstalled SLS and ran Software Update to bring the machine up to 10.6.6 the USB Ethernet adapter that was the interface to the outside world no longer recognized when a cable was plugged in. The cable was good and worked just fine if plugged into another machine or the built-in interface. At first I thought that the USB Interface had failed but after trying two new ones (graciously exchanged by Apple) and finding that none of them worked I'm coming to the conclusion that perhaps the warning on the package that the USB Ethernet only works with the MacBook Air finally became true.
Only the specific build of Mac OS X that comes with a MacBook Air includes the kernel extension to run the Apple USB Ethernet adapter, however there are no hardware issues preventing it being used on other Mac models if you have a suitable driver.
Generic USB drivers can be downloaded for free from http://www.sustworks.com/site/newsusbethernet.html and this worked for me.

Virus on mac mini and running slow

My mac mini is running slow. Takes a while to open apps and sometimes does not open and I have to restart.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

Can the new Intel Mac Mini really run Win XP?

I have had my Mac Mini for almost two years now and i love it, i love it because i switched from Windows, but now i kind of miss Windows so i was going to buy a Windows PC but then i read somewhere that the new 1.66GHz Intel Core Duo Mac Mini can run Windows XP, so i have few questions if that is true...
1. How well will Win XP run on the new 1.66 GHz Mini with 1 Gig of RAM?
2. Which version of XP do i need to buy and where is the best place to buy it?
3. I know this might be a dumb question since Windows Vista is not out yet but do you think i will be able to use Vista as well?
Vista requires 512 of RAM for the basics and 1 Gig of RAM for max performance.
That's all i have for now, thanks in advance.
Any help and advice would be greatly appreciated!
Mac Mini 1.42 GHz G4 Mac OS X (10.3.9) It's small...?

1) If ou run it with Boot Camp (i.e. in a dual-boot environment, rather than through virtualization), it will run as well as on a PC with 1 GB of RAM, a 1.66 Ghz Core Duo processor and GMA 950 integrated graphics (quite well, but unsuitable for recent 3D games).
2) You need a standalone (non-OEM) version of Windows XP Home or Pro with SP2 included, any retail version of Windows XP should do. There are also workarounds that allow you to install other versions of Windows (like Windows XP Media Center).
3) The Mini should be able to run Vista (some people have already installed Beta versions of Vista on Intel Minis) but how well, I don't know.
BTW Boot Camp is actually Beta software, and its license ends in February 2007 (or earlier if Leopard is released before then).
If you need more information, you can also ask in the Boot Camp forum.

My Mac Mini is running on iOS 10.6.8 can it be loaded with 7.0 or higher?

My Mac Mini is running on iOS 10.6.8 can it be loaded with 7.0 or higher?

Choose About this Mac from the Apple menu, check if the computer has at least 2GB of RAM, and if it does, click here and order a download code for Lion 10.7.
Back up your data and check your applications for compatibility before upgrading. In particular, Mac OS X 10.7 and newer don't support PowerPC programs such as versions of Microsoft Office prior to 2008.
(113087)

Mac Mini Lab Running Windows 7 - Wake On Lan

Hi All
I have a number of Mac Mini labs running Windows 7 64bit. Prior to having Mac Minis we had straight PC's and WOL worked perfectly. Now we cannot get WOL to work at all. These are straight PC's now, not bootcamped Mini's. Anyone got any advice on how to get WOL to work at all.
thanks

These are straight PC's now, not bootcamped Mini's.
I can't for the life of me figure that statement out!?
<ight try asking here...
https://discussions.apple.com/community/windows_software

My mac mini is running slow. Bought it in 2009. Activity monitor shows nothing running that should not be. Someone suggested it might be my operating system? Check for software updates, and I am current. Suggestions?

My mac mini is running slow. Bought it in 2009. Activity monitor shows nothing running that should not be. Someone suggested it might be my operating system? Check for software updates, and I am current. Suggestions?

Open Activity Monitor, Show:>All Processes, sort on CPU%, see if anything using too much CPU% when this happens, click on Memory tab, do you have many Pageouts?
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
Check the S.M.A.R.T. status of the drive in Disk Utilty by highlighting the Drive & looking at the bottom of the window.

I am not able to install my 'Complete National Geographic' cd on my Mac mini which runs Lion OS. The error message I get says 'Can't open installer as classic environment is no longer supported' can some one suggest a solution

I am not able to install my 'Complete National Geographic' cd on my Mac mini which runs Lion OS. The error message I get says 'Can't open installer as classic environment is no longer supported' can some one suggest a solution.

It means the software is PowerPC code, which is no longer supported in Lion. Your choices are to go back to Snow Leopard, run Snow Leopard Server in a virtual machine within Lion, see if the vendor has an updated version of National Geographic that will run on an Intel Mac, or run the software on an older Mac separately.

Creating NetRestore Image of OS X Yosemite (10.10) from Mac Mini Server Running Mavericks (10.9)

Hello all,
We are attempting to create a NetRestore image of a Macbook Pro running Yosemite (10.10) from a Mavericks (10.9) Mac Mini running OS X Server. Previously we connected a Macbook Pro in target mode to our Mac Mini (both running Mavericks) using System Image Utility to create a NetRestore SP0 from which we could deploy to all of the computers in our lab running Mavericks. We did this as a method to update the applications on each iMac locally from the hosted NetRestore image we created. We are now receiving several new iMacs and Mac Pros running Yosemite (10.10) native and we wish to use the same process to update these machines from our Mac Mini (Mavericks) running OS X Server.
We are now trying create a NetRestore image from a native Yosemite Macbook Pro using System Image Utility on our Mac Mini (running Mavericks) however when the Yosemite Macbook Pro is connected in target mode, System Image Utility does not recognize the volume although it is recognized by our Mac mini (e.g., the yellow-orange image icon is displayed on the Mac Mini's desktop). Some of our lab computers are still running Mavericks, and my understanding is that Mavericks NetRestore Images cannot be created from a Mac Mini with OS X Server running Yosemite.
Must we upgrade our Mac mini from Mavericks to Yosemite for System Image Utility to recognize our Yosemite Macbook Pro (connected in target mode) in order to create a Yosemite NetRestore Image?
Note: We know there are better alternatives (e.g., Munki) to deploy updates to our machines via server and are working to establish a more convenient process, but this is the method we have been comfortable using before running into the above issue.
Thanks all!

You could use DeployStudio to 'serve' both Yosemite and Mavericks images from your Mac mini which can still run Mavericks. You would also use DeployStudio to make an image of the MacBook once it has been loaded and then this image can be restored to multiple machines.
See http://www.deploystudio.com

For a Macbook Air will I need to buy a mac mini to run additional programs like photoshop and games

As a graphic design student I wanted to own a laptop that was capable of running Adobe programs and games, but I bought a 2014 Macbook Air; 128GB of storage, 4GB of memory, and runs at 1.4 Ghz. With this information will I still be able to run programs with no problem or will I need to buy a Mac Mini to run all the programs and games that'll be too much for my Air.

Your MacBook Air has turbo boost up to 2.7GHz > http://store.apple.com/us/buy-mac/macbook-air?product=MD711LL/B&step=config
Check Adobe's website for minimum requirements for the apps and games you want to use.
Turbo boost is a technology integrated into Intel processors that temporarily increases the speed of the processor when needed.

Mac mini is running slow what steps should I take to determine what's slowing it down? New to MAC

My Mac mini is running very slow, I suspect it is a software problem. I'm new to Mac and would appreciate some suggestions on what steps to take.

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

HT1338 Silverlight on MAC MINI to run Redbox Instant?

Similar Messages

Maybe you are looking for