HT1338 since IOS6 update i cannot air print from my ipad3 and iPhone4. Any ideas??????
since IOS6 update i can use Air print on my IPAD3 and IPHONE 4. Can anyone help??????????
I have the same problem as do many others. Neither my iPhone 3 or 4 work since upgrading to ios6.
All Windows based devices work fine it is just a problem with ios6, I think Apple are working on this.
Was about to buy a mac laptop but now gone back to PC.
I think all we can do is make a fuss to Apple to hurry them along.
Similar Messages
-
cannot air print from ipad 2 to canon MG5370 air printer,
Canon Easy Print free app for iPad might work
-
I can't sync my photos on my iPhone 5 or IPad 2 from my MacBook Pro. It tells me my phone/pad cannot be read from or written to. Any ideas?
No it't okay I finally figured it out!
I went to 'devices and printers'
it listed all the devices plugged in and on 'ipod' and 'iphone' there was a yellow '!' I clicked it and it troubleshooted the issue and now everything is working yay! -
All of a sudden i can no longer air print from my iphone 4S or my ipad 2
Need help
I can still air print from my Dell laptopHello rcappel,
Thank you for the details of the issue you are experiencing when printing from your iPhone and iPad. I found a couple of resources I recommend for the issue you described.
First, I recommend following these steps:
If you are unable to print, or if you see the message "No AirPrint Printers Found"
Verify that the printer:
Has power and is turned on. If it has power, turn the printer off and then on again to see if that resolves the issue.
Is connected to the same Wi-Fi network as the iOS device.
Has the latest firmware version installed.
Has paper with enough ink or toner installed.
Is free of any errors displayed on the printer's control panel.
If necessary, consult the printer documentation or contact the printer vendor for help with the above steps.
You can find the full article here:
AirPrint Basics
http://support.apple.com/kb/HT4356
If you are still having trouble printing after following those steps, I recommend these steps:
Wi-Fi disconnects, or signal strength is less than expected
Move closer to the Wi-Fi router (access point).
Check for sources of potential interference.
Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings including: previously connected Wi-Fi networks and passwords, recently used Bluetooth accessories, VPN and APN settings.
You can find the full article here:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Hello there
Have been given a 4s.
All set up and working - except.......
when I try to write an email [via wifi], tapping the 'write' icon does not work and I have to hold it. Then the 'DRAFT' page appears, not 'NEW MESSAGE'.
So cannot write emails from my 'phone.
Any help would be much appreciated.Try a reset: hold down the home button along with the sleep/wake button until you see the apple, then let go. (No data loss)
-
My email won't send from my iPad. It says the server rejects it almost immediately I press the send email button, although there is nothing wrong with my email account when sending from my laptop or iphone. I have cancelled the account and re-entered it but it hasn't made a difference? Anybody help?
Hi Allan,
Thank you for your help . The account used to work perfectly until recently, after receiving support from the provider, I deleted the account now I am trying to set the account again.
After putting in the first details (name, email, description) Cannot send mail the password or username for "mail.bigpond.com" is incorrect. I would expect this because the information I put in is not for Bigpond. So I press ok & I change the outgoing server (this is the one that is incorrectly labelled bigpond) to aapt, then I press save.
Then it says "verifying" but comes up with Cannot connect using SSL do you want to try setting up the account without SSL. I press yes.
Then I get the message "the POP server "mail.aapt.net.au" is not responding. Check your network connection & that you entered the correct information in the incoming mail server. (I ahve already checked this with aapt & it is correct. -
I bought itunes match over a year ago and didn't really like it so I removed it from my phone/itunes library altogether but I still have like 12 songs that are stuck on the phone and will not play because my itunes match has now expired, they can't be removed either apparently. I've tried all the regular ways so please somebody come up with something original way to get rid of them. They have no cover art and are really starting to bother me.
Make sure you don't have updates yet for oldify etc if not , Do reset. On whole phone. Updates will come for oldify.
-
How do I do a firmware update on my canon 5320 printer? I am trying to air print from my iphone and ipad with no luck.
You need to go to the Canon forum or support site.
-
Re iPhone 5: Since IOS 8 8.0.2 update, I cannot get email from 1 of the 2 email accounts (which is from the same internet provider). They use the same imap and smtp ports. Is that a problem? Or is it IOS? No problems previously. I can get both emails on iPad and Mac Air.
I reset by pressing power and menu button at same time until I saw the apple. Did not help. Deleted then added account back. Did not help. Next deleted account, reset again, added account back. Still does not work:( any other suggestions?
-
I have an iPad2 and recently updated the ios. Since the update, I cannot connect to wi-fi through my router. I can still connect at work, but at home it will just not work. I have tried everything I can think of. I have reset, uninstalled, re-installed, and changed routers. 3 times. I cannot get it to work. Does this have something to do with the update? I have even reset the network settings, and restored the ipad itself to factory default settings. Can anyone help me?
Try and "Forget This Network"
Settings>Wi-Fi>tap little arrow on right of network.
http://i1224.photobucket.com/albums/ee374/Diavonex/ea2bf71cacb51e31d8a771a9f29d7 486.jpg -
4s STILL not connecting to home wifi since ios6 update
My wife and I both have the 4s. We have not been able to use our home wifi since the ios6 update in Sept'12.
Our macbook, ipad, and tivo all connect just fine. Our 4s's work fine on any other wifi we need - just not the same dlink router dir-615 we've been using for years.
I've reset my phone, i've reset the router, i'm on WPA/WPA2. We're able to use wifi on the 4s for apps and google for about 2 minutes (this is when i assume everyone says "yey! it's fixed") only then stops working, but still shows we're connected to wifi.
Apple blames the router (some threads speak of apple router's not even working)
Dlink blames the iphone software (i've read even brand new iphones still don't work)
Verizon doesn't care because neither of the products are theirs and i'm using more of my data plan - so they win.
i'm growing increasingly embarassed to be "all apple" when i see the thousands of others with the same problem - and NO HELP from Apple. We're basically on our own here - when we used to be able to rely on the company for expert solutions.
I need a solution that is simple. I want a solution that's easy for guests to use my wifi with out taking their phone apart, rewiring it, hooking it up to my car battery, deciphering 4 different codes, and taking an online course at MIT. I just want to use my password and get on my wifi.
please help - and if you can provide any tips, please ensure you're read the above first!i checked for updated firmware on the d'link dir-615 router back in september when this first happened (after the ios6 update) but the firmware was already up to date - although the last update was 2009.
This was my first clue.
After further research, I discovered that all DIR series products have been discontinued by D'Link. This means that when apple is preparing for a software update, it requests all software/hardware specs from wifi router companies like D'Link, Netgear, Garmin, Cysco, etc. Since D'LInk no longer produces DIR series routers, they did not provide the info. D'Link only provided info for it's newest line of wireless routers.
Leaving all existing DIR users in the dust, with a failed strategy that we'd all buy the new line of wifi routers.
Yesterday, I purchased an Apple wifi router, although pricey at $99, i plugged it in, typed the network name and pw want to use, and it was up and running in less than 5 minutes. The apple router will recieve software/firmware updates just as my iphone, macbook, & ipad does. Everything is working perfectly, and the higher price is worth the convenience and reliability.
If anyone makes it this far, the only thing left would be to check with your internet service provider (comcast, RCN, etc) and make sure you have the most up to date modem. some folks are unable to send text & pic messages on wifi using an out of date modem. (i didn't have to replace mine, but i'm also not having this issue now that i have the new apple wifi router.)
Hope this helps at least a few people out there. -
After the iOS6 update I cannot use messages on my iPad
After the iOS6 update I cannot use messages on my iPad2 anymore. To not any person on my contact list. The message will not send.
On your phone. Go to itunes, find the tone and it should have a little download sign next to it, not a money amount sign. Just re-download it. On your iTunes on your computer, check to make sure you have the "Sync tones" box checked.
-
Since Yosemite update, we cannot open Minecraft. Keep getting message that we need to install the legacy SE 6 runtime. This does not work. Any suggestions? A nine year old boy will be grateful as will his mother! Thanks!
Is this the one you're installing?
Java for OS X 2014-001 -
Just purchased a office jet 6500A Plus so that I can print from my iPhone and iPad. I can print form my iPhone but my iPad 2 tells me there is no air printer available. Why does one device recognize the air printer but the other device does not?
I have the 6500A without plus and it is with a LAN cable connected with my Router.
First make sure you have the latest printer firmware installed.
Next restart the printer and the Router.
I had the same. Problem but it went away after rebooting the Router. -
I installed the new 7.0 on my ipad and now I cannot get my internet connection to work. Any ideas, I have already tried rebooting but no luck. Another useless apple update that doesnt work?
1. Turn router off for 30 seconds and on again.
2. Settings>General>Reset>Reset Network Settings.
Maybe you are looking for
-
How to send PUT, DELETE HTTP request in HttpURLConnection ?
Hi all. I want to know that is it possible to send PUT, DELETE request (practically) through java.net.httpURLConnection to http based URL. I have read so many articles describing that how to send GET, POST, TRACE, OPTIONS request but still not findin
-
[mount] FAT: codepage cp1252 not found
Hello When I mount an usb memory (FAT32), accents (special non-english characters) are incorrectly read by the system (bad display when listing files for example). mount uses "cp850" for FAT32. For western european microsoft codepage (cp1252), I try
-
I need to way to display the contents of an ASP / HTML page in PDF format. As of now I can display the static data, known number of fields for everyone like first name, last name, county..., but do not understand how to save the dynamic data. Since
-
Export Movie - Render Width & Height locked in CS5
Hi, Today I have just updated to CS5 from CS3 for a job where I have to export a bunch of FLA projects to Quicktime files. In Flash CS3 I was able to change the 'Render Width' and 'Render Height' in the 'Export Movie.." settings, which told Flash how
-
Hello, Is there a page where is explained how to install gnu step ? I like to try it out. Roelof