HT1338 the Macbook Pro would not even detect the external monitor.

My Macbook pro will not connect to an external monitor after moving it. It has been running on this same monitor for 8 months. I switched to a new Desk last night, after hooking it up, the Macbook Pro would not even detect the external monitor. It was only showing the Macs monitor in Display. It did not even have where you could "Detect Display" available. Is there an update that I may have missed. I have tested all the Monitor connections with another laptop they all work.

finally I would like to know if my computer falls under
http://support.apple.com/kb/TS2377
If nothing displays but you hear normal startup sounds, then it's possible this is a video issue, and you should take it to an Apple store or AASP.

Similar Messages

  • My 2008 15" macbook pro would not start up. After pushing the power button, the startup tone sounded, but kept repeating as if something was jammed. Screen remained black with no logo nor messages. Pls help.

    My 2008 15" macbook pro would not start up. After pushing the power button, the startup tone sounded, but kept repeating as if something was jammed. Screen remained black with no logo nor messages. Pls help.

    Now that you mentioned it, that might be the source of the problem. Something was definitely wrong with my graphics card before the incident happened. You mean that particular batch of graphics cards had some inherent issues, right? I went to the genius bar, and the 'genius' there, without trying to diagnose the problem properly, just adviced me to buy a new mbp! He said Apple will no longer try to fix or touch macs older than 5 yrs. Mine is 5.5 yrs old...

  • My iPhone will connect with my Goodmans bluetooth speaker but my macbook pro will not, even though it will pair with it and 'sees'it

    My iPhone will connect with my Goodmans bluetooth speaker but my macbook pro will not, even though it will pair with it and 'sees' it

    Hi there tomcrud,
    You may find the information in the article below helpful.
    OS X Mavericks: Set up Bluetooth audio devices
    http://support.apple.com/kb/PH14217
    Also, make sure your iPhone is not paired to the speaker while trying to piar it to your Mac.
    -Griff W. 

  • After I installed Lion, my MacBook Pro can no longer detect my external hard drives or my USB flash drives. What should I do?

    After I installed Lion, my MacBook Pro can no longer detect my external hard drives or my USB flash drives. What should I do?

    And me -- My Mac at work running Snow Leopard reads the drive normally. My home Mac (on Lion) can't even find it....
    Yet another Leo let-down.....

  • MacBook Pro won't stay asleep with external monitor attached.  When sleep is selected from the Apple menu the computer will go to sleep only to continually wake up...go back to sleep...wake up...etc. every few seconds.

    MacBook Pro won't stay asleep with external monitor attached.  When sleep is selected from the Apple menu the computer will go to sleep only to continually wake up...go back to sleep...wake up...etc. every few seconds.  This only happens when using the external monitor. Does anyone have any suggestions?

    Mine does that too. The worst thing is when it goes to sleep, then wakes up and keeps running while the lid is closed and it is wrapped up in a case. I am afraid when the hot weather comes it is going to burn up. I am hoping Apple fixes it in the software or they may have a melted MBP to replace.
    Then when I open the lid it is crashed running at fill tilt, pumping out heat to beat the band. I am forced to hold the button down and reboot.
    I wiped my hard disk and reinstalled my OS, but it didn't help. I reversed my OS to 10.5.0 and it solved the DVI problem but still won't sleep. This post will probably be deleted by Apple, they did it a few days ago. I just don't know what to do, and I consider myself a real Apple expert. Just hoping you realize you are not the only one.

  • HT1338 My macbook pro will not download or update software. The computer restarts without an update. How do I fix this?

    My macbook pro will not download or update software. The computer restarts without an update. How do I fix this?

    Hello, which exact update is this? Which OSX version?

  • Got HDCP problem on macbook pro screen not even external screen

    I have rented a movie (HD) on itunes.
    I download it and try to play it, then I have a popup saying that the movie can't be displayed on my screen because of some HDCP restriction.
    I don't understand, I've got a mbp retina display, I just try to play the movie on the computer, I did not even plug an external screen.
    I am running Mountain Lion 10.8.4, with itunes 11.
    I think the most innaceptable is that I did not even have a warning that say that I can't rent the movie, or that I would not be able to read it on my mac.

    High-bandwidth Digital Content Protection(HDCP; commonly, though incorrectly, referred to as High-Definition Copy(right) Protection) is a form of digital copy protectiondeveloped by Intel Corporation to prevent copying of digital audio and video content as it travels across connections. Types of connections include DisplayPort (DP),Digital Visual Interface (DVI), and High-Definition Multimedia Interface (HDMI), as well as less popular, or now defunct, protocols like Gigabit Video Interface(GVIF) and Unified Display Interface(UDI).
    Meaning, someone doesn't want you to be able to play the movie on the screen because of copyright reasons.
    Sorry. (I know, DRM sukcs!!)

  • HT1338 Why macbook pro does not read SanDisk SD ram?

    Why macbook pro does not read SanDisk SD ram?
    I really have problem with that.

    http://support.apple.com/kb/HT3553

  • My macbook pro will not recognize my WD external hard drive 1tb

    My macbook pro will not recognize my WD 1 tb external hard drive that I have as my time machine backup. I worked just fine for a long time now The only way I can see it is through Disk utility. And when I try to repair the disk it say it cant be repaired, and i need to back up files and reformat. All my backups are on the hard drive. How do I back up the back if I cant get it recognized? Uggghhhhh I have several years of info on the hard drive .. PLEASE HELP!!!

    Hi cterry66,
    Welcome to the Apple Support Communities!
    I understand you would like to reset the user account password on your computer but do not know the original password. If you set up your Apple ID with that user account, you can use that Apple ID to reset your OS X user password. Please use the information provided in the attached article to complete the process. 
    OS X: Apple ID can be used to reset your user account password - Apple Support
    Cheers,
    Joe

  • MacBook pro does not recognize my WD external hard drive anymore

    I use TIme Machine on my WD external hard drive. Everything was working great up until about a month ago. My MacBook Pro does not recognize my external hard drive anymore...I have done nothing differently than usual. I did search in previous discussions and tried rebooting both the hard drive and the computer.
    The USB port is fine as it does recognize another external hard drive and also pen drives....Please help! I haven't backed up in a month and need to figure out how to get this to work soon. Should I call WD?

    Does the WD drive show in Disk Utility?
    Many times, a USB port simply cannot provide the power a hard drive needs. It is not uncommon for any electric motor to draw more power as it ages. A drive that worked before can stop working when it gets older because age has made it tak more power than any USB port can supply. There are a couple of cheap things to try:
    1) A "Y" USB cable---two plugs go to the computer and one to hte drive, giving a power boost.
    1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
    2) a POWERED USB hub. That takes the power delivery burden off the USB port so it can deal with data.
    WD bare drives are fine but their enclosures are not very Mac-friendly. One thing that has reported helping is to get rid of the proprietary formating that WD puts on their drives. If you don't have to share the drive with a Windows computer, use Disk Utility to erase and reformat the drive to Macintosh Extended Journaled.

  • Outfitting 13" MacBook Pro to Use at Desk with External Monitor

    Hello, I have decided to throw out my 2007 Dell Dimension laptop and go with a 13" MacBook Pro. I would like to use the new laptop both at my desk, connected to an external keyboard and possibly mouse, plus an external monitor, and at times just as a simple laptop outside the office.  I heard that you can configure it so that there would be an extended desktop, consisting of the MacBook Pro's screen plus the external monitor.
    I am looking to compile a list of hardware accessories I would need to do this and for recommendations about the best hardware to get.  (I suppose that the most important piece of hardware would be the monitor itself.)  (I am assuming that everything would be plug and play and that no additional software would be necessary)
    Any advice would be greatly appreciated.
    many thanks

    Steve
    Do you really need 2560 x 1600?
    Your MBP will deal with up to 1920 x 1200 which is pretty good on an external (say 23" monitor)
    So to set up - DVI out to your monitor. Mains power in to the MBP and you can have it screen off while you work away. With no power adapter both screens will be on.
    Go to System Prefs / Displays to set up your res and screen layout. You can have mirrored or extended.
    Your MBP will get hot and its best left with the lid open for heat to get out. Open the lid once its woken from sleep. Startup will be with screen open. Then put MBP to sleep - close lid - wake up from the keyboard.
    Hope thats what you needed!

  • Why does my Macbook Pro battery not even last me 2 hours even just browsing the internet or typing a document?

    So my Macbook Pro 2011 that isn't even a year and a half old only lasts me about 2 hours of battery.  My brightness is set to only 4 notches most of the time and I mostly have google chrome and itunes or spotify open when I am using it.  I have to charge it about 2 times a day.  My old original unibody macbook lasted a longer time than this.  Today, my fans were running faster than normal and my battery drained 20 percent in less than a half hour. 
    Here is all of my battery/power info:
    Battery Information:
      Model Information:
      Serial Number:          xxxxxxxxxxxxxxxxxxx
      Manufacturer:          SMP
      Device Name:          bq20z451
      Pack Lot Code:          0
      PCB Lot Code:          0
      Firmware Version:          406
      Hardware Revision:          2
      Cell Revision:          158
      Charge Information:
      Charge Remaining (mAh):          2545
      Fully Charged:          No
      Charging:          No
      Full Charge Capacity (mAh):          6147
      Health Information:
      Cycle Count:          371
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          -2085
      Voltage (mV):          11092
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):          25
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          15
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      Wake on LAN:          Yes
      Display Sleep Uses Dim:          Yes
      GPUSwitch:          2
      PrioritizeNetworkReachabilityOverSleep:          0
      RestartAfterKernelPanic:          157680000
      Standby Delay:          4200
      Standby Enabled:          0
      Battery Power:
      System Sleep Timer (Minutes):          20
      Disk Sleep Timer (Minutes):          0
      Display Sleep Timer (Minutes):          15
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      Current Power Source:          Yes
      Display Sleep Uses Dim:          Yes
      GPUSwitch:          2
      Reduce Brightness:          Yes
      RestartAfterKernelPanic:          157680000
      Standby Delay:          4200
      Standby Enabled:          0
    Hardware Configuration:
      UPS Installed:          No
    AC Charger Information:
      Connected:          No
      Charging:          No
    Here is all the processes my mac was running today:
    http://pastebin.com/z91Sp3Kk
    I would greatly apprecieate any feedback or help that anyone could give me.  I don't even do processor intensive tasks so I don't know why my battery isn't lasting me more than 2 hours.
    Thank you.

    if you look at this process...
    39484  Shockwave Flash (Chrome P me         53.5     189.5 MB        1.05 GB
    it was using 53.5% of you CPU. Which if used over a long period of time, a lot of battery will be used and it will drain quickly, try figuring out what this is and use it less often, or try deleting it if it is not important.

  • Hi, I have a late October 2008 Macbook Pro Unibody which I wanted to use my Magma Expressbox card with. I had a Silver Macbook Pro before which this worked fine with but for some reason my newer Macbook Pro does not even recognize the Expresscard slot?

    Highly anooying as I can't even use the Express Card slot at all, due to the fact the Macbook doesn't even recognize it exists. Has anyone else had this problem. If so, how was it fixed? I only upgraded my Macbook Pro due to the fact Ineeded a better performance but I still need my Expressbox1 to work with my UAD DSP card. If not the buying the new MAcbook was a total waste of money if the Express Card does not even fundtion on it? Please help!!

    Mavericks is no longer available from the App Store, so your choice is Yosemite. One option is to create a new partition (~30- 50 GB), install the new OS, and ‘test drive’ it. If you like/don’t like it it, you can then remove the partition. Do a backup before you do anything. By doing this, if you don’t like it you won't have to go though the revert process.
    Check to make sure your applications are compatible.
    Application Compatibility
    Applications Compatibility (2)

  • HT1338 My macbook pro is not recognising or connecting to the personal internet hotspot on my Iphone 4. How do I rectify. Was working fine yesterday.

    Since yesterday my macbook wont accept or connect to my personal hotspot on my I phone 4s. Any suggestions fellow applemeisters?

    Problem resolved
    I was unable to use iPhone  4 ios 6.o.1 as a WIFI Verizon cellular hotspot to give my with my Macbook PRO OSX 10.6.8 internet access
    In the past I was able to do so but this function quit working several months ago.  I blamed it on either defective hardware or IOS 6 upgrades.
    My iphone showed an active hotspot and connection but I was not showing a connection on my Macbook.  I was getting an error on my Macbook saying bluetooth was not active on the device.
    As a result I was not able to tether my Macbook to my iPhone hotspot through bluetooth or via USB
    After MANY MANY hours researching  I found an idea for the solution in the website below by Girl.luvzer.Mac
    http://chimac.net/2010/10/21/your-connection-failed-because-the-communication-de vice-is-unavailable-make-sure-its-connected-to-your-computer-and-try-reconnectin g/
    My instructions are below:
    Go to Macbook System Preferences>Network . At the top of this window, it probably will say Location:Automatic. Click that drop-down box and choose “Edit Locations”. Click on the +, and create and select a new location.  You do not need to name the location you create. 
    This was the key for me to get my iPhone hotspot bluetooth and tethering working with my Macbook
    Some other notes:
    Your cellphone provider needs to enable hotspot capability on your cellphone service
    Your iPhone settings will need to have both bluetooth and cellular hotspot turned on
    You will have to pair your iPhone and Macbook
    Go to ...Settings/ Network/Bluetooth
       Click the ON and Discoverable boxes
       If your iphone is already shown in the box on the left press the - button to remove it
       Click sharing setup to pair your Macbook with your iPhone
    In your Macbook ...Settings / Network
      Turn off Airport
       Select Bluetooth Pan and use the connect button to connect to your iPhone
       It will take a moment for the connection to complete
    Once you have done that your iPhone should provide your Macbook a wired USB or a Bluetooth hotspot!!!
    Good luck, I hope this works for you as well
    This was submitted via my Macbook through my newly fixed iPhone hotspot ;-)

  • My Macbook pro is not even a month old, do I need a new battery?!

    I bought this laptop THIS month. It started acting up by shutting down with no warning. Just out of nowhere, a black sceen, and when I went to turn it back on, it would struggle to boot up.  I fixed this by resetting the PRAM, and then after that the battery wouldn't hold a charge, and it had to be always plugged it. Resetting the SMC fixed that just fine.  Great, everything is fixed.
    No, it's not.
    the next week, my battery started to say that I should replace it now. I though that was strange, so after restting the SMC again, I started my first ever battery callibration. After the battery was completely drained and I let it sleep for around 6 hours or so, I turned it on and started to charge it and use it, and BAM. Now the battery won't charge. It's only running off of AC power right now, after only 26 cycles.
    I bought a macbook because I though it would be less maintenence than my Thinkpad Edge that had a terrible build quality and messed up system registery. Now I just think I have bad laptop luck.  I don't think I have time to bring it into an Apple store soon because I'm at a University and its almost finals week... please help

    the best thing for your to do - since it's only a month old is to take it to Apple and have them look at it for you.
    it's under warranty - take advantage of it.
    one more thing - never - ever - try to calibrate your battery or let it get fully discharge - not sure who told you to do this but it's a bad idea on macbooks with built in batteries.  as you can see from what you're experiencing right now.
    good luck and hopefully you get it sorted out.
    Portables with built-in batteries
    Current Apple portable computer batteries are pre-calibrated and do not require the calibration procedure outlined in this article. These computers use batteries that should be replaced only by an Apple Authorized Service Provider.
    MacBook 
    MacBook (13-inch, Late 2009) and later
    MacBook Air
    MacBook Air (all models)
    MacBook Pro
    MacBook Pro with Retina display (all models)
    MacBook Pro (13-inch, Mid 2009) and later
    MacBook Pro (15-inch, Mid 2009) and later
    MacBook Pro (17-inch, Early 2009) and later

Maybe you are looking for

  • How do I fix the red screen of death issue?

    iPad Air, 13 mo. old:  working fine yesterday, plugged it in to charge (left it on) and about 8 hrs later I went to use it.  When I opened the case, I had the red screen of death.  No error messages, can't see any of the icons.  just red screen.  I f

  • Select Empno,name,sum()..group by empno only  Is this possible?

    select empno,name,sum(sal) from emptable where year=' ' groub by empno order by empno. this query getting error because i didn't include empname in group by. But if i include this name, my sum is not correct. so i want to empno,name but i don't want

  • 3rd Party Drop Ship Process

    Hello Friends I was told to create a third party drop ship process and its going to be only one product for now , please help me to show steps to create this. Thank's

  • My touchsmart300 is not working with my logitech cameras

    I could also be missing drivers I had to by a new harddrive and it hasn't been the same I am actually disgusted with it

  • Thread.start() without run() invoke

    We got interesting problem during migration one old application from java 1.4.2_08 to the java 1.5.0_06. The principal code of application is: public class objServ extends Thread {   public void run() {      while (!End) {            clientSocket = S