HT1338 the round multicolour circule keeps going round for a long time

i have just cloes a closed numbers on my macbook pro and it asked me if i wanted to save the documnet and i clicked on delete documnet i got this multicoulor circule that keeps spinning round it wont stop so im gussing my system is crashed so what can i do to stop this

Hi, Mrs H -
Expanding a bit on Jeff's comments...
Lightning seeks ground. It may travel on anything conductive, even leaping from one path to another, but what it is seeking is a connection to ground. Turning a computer and its peripherals off does not interrupt their ground connection; ditto the UPS and any other normal surge protection devices. The switches on all of that equipment interrupt only the power (hot) leads, not the ground connections.
The only way to interrupt the ground connections reliably is to unplug everything. One advantage of using a UPS and/or surge protector strips is that it makes interrupting the ground connection easier - just unplug the UPS and/or the surge strips from the wall outlet.
However, that is not quite sufficient: it is also necessary to disconnect any internet connection. Unplug the phone wire for dial-up or DSL connections, or the cable for cable broadband connections.
I had first-hand experience with such a few years ago. I was pushing the envelope, thinking I had some time yet before a coming electrical storm got close enough to be of concern. While I was using the computer, lightning struck a school across the street. A stray twinkle of lightning passed through my home office, about two feet in front of me (I say 'twinkle' because it was midday and that's all my eyes were able to register).
The computer immediately displayed a message that it had lost communication with a firewire drive, then froze. First thing I did was a force-restart, which was successful - even the firewire drive referenced in the message was back.
What was not back was ethernet - no comm with my printer or the internet. After a bout of testing I isolated the problem - my ethernet hub and one ethernet cable were fried. Nothing else was damaged. I had spares for both on hand, so was back to normal a few minutes later.
Having learned the lesson relatively painlessly, I now unplug everything much sooner when such a storm is impending.

Similar Messages

Good day. as I can do to update my iphone 4 to the latest version of ios 5. whenever you connect to the pc and try to update the waiting time is very long, sometimes up to 12 hours and despite the wait always produce an error message for a long time waiti

good day. as I can do to update my iphone 4 to the latest version of ios 5. whenever you connect to the pc and try to update the waiting time is very long, sometimes up to 12 hours and despite the wait always produce an error message for a long time waiting

Disable ALL security software (firewall, antivirus/spyware, etc.) running on your PC while updating.

I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. Help!

I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. I have been doing it for last 12 hours. Help!

Thanks for your reply Michalo. I am in India and here Apple care does not work on Sundays. I have been without my phone for the entire day. Perhaps tomorrow will bring some respite. There is not solution to "error (-1)" on any forum it seems. I found one forum which suggested use of Tiny Umbrella. Any idea about that?

How to keep short dumps for a longer time

Hi All,
I need to write a program to fetch all the below mentioned fields from the system dump tables and insert into a user defind table. Please help me with the code. Thanks in advance....
PROBLEM DESCRIPTION
ABAP runtime errors (also known as short-dumps) are kept in the system only for two days, mainly because every short-dump can use a lot of disk space depending on short-dump type. Problem is that this reduced time frame (two days) is not allowing us to focus in solve the more frequent ones and we do not have any statistic about:
    how many are we getting
    how often
    repetitive ones
PROPOSED SOLUTION
We need a program to be executed in a daily job right after midnight which will take the basic information of all todays short-dumps and store it in a custom table.
Information to be kept:
      DATE
      TIME
      HOST
      USER
      SYSTEM
      CLIENT
      ERROR ID
      TRANSACTION
      PROGRAM NAME
      PROGRAM NAME VERSION (TRANSPORT REQUEST NUMBER)
      PROGRAM NAME VERSION TIMESTAMP (transported to PPx)
      SCREEN
      SCREEN LINE
      MAIN PROGRAM NAME
      MAIN PROGRAM NAME VERSION (TRANSPORT REQUEST NUMBER)
      MAIN PROGRAM NAME VERSION TIMESTAMP (transported to PPx)
      PROGRAM LINE NUMBER AT TERMINATION
      SAP RELEASE
      SAP KERNEL
      PATCH LEVEL
      DATABASE VERSION
The program must have archiving capabilities implemented. In the month end run it will also perform the table house-keeping accordingly with a parameter like this:
     ERROR-ID
     MONTHS TO KEEP
We need to have the possibility of defining different retention periods for different kind of errors, for example our friend GETWA_TOO_MANY_SEGMENT could be stored for a year and a simple CONVT_NO_NUMBER only for a month. One of the parameters should be the default one, something like
        ERROR-ID **************
        MONTHS TO KEEP 01.

Aruna,
Following may be the action points for your requirements.
1. Create Custom table with all fields you required.
2. Create ABAP program to extract the data from SAP standard table where runtime error information is stored.
Like: select * from snap_beg into wa_snap_beg
          where seqno = '000'
          and   datum in s_datum
          and   uzeit in s_uzeit
          and   ahost in s_ahost
          and   uname in s_uname
          and   mandt in s_mandt.......
So SNAP_BEG is a table where you can find dump information.
After extracting the data from this table insert it into a Custom table which you have created in Step 1.
Use INSERT statement for this.
3. Create transaction for this report.
4. Schedule this program every day so that you will get all data into custom table.
I hope this will help you.
Regards,
Amey

Itunes will not open after uninstall and re-download, I only get a message itunes match accessing itunes store which goes on for a long time

I could not open I-tunes. I had used it a week before but it was spotty and then eventually it would not open at all. I uninstalled it then downloaded it. I restarted the computer. When I tried to open itunes, I got a message "ITunes match. Accessing iTunes store" and it does not go beyond that. I've tried this process twice. I had my Norton support service do a tuneup and they downloaded iTunes but it will still not work. help!

Hello SharlaCerr,
The article linked below provides some helpful troubleshooting steps that can help get iTunes running on your computer.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Allen

Random kernel panics going on for a long time, desperate for help!

Hi, I didn'nt quite know what to name this thread, but I will try to describe the problems I have with my MacBook Pro here.
I have a mid-2009 MacBook Pro and the problems started more than a year ago. They are present under both Snow Leopard and Lion.
Every now and then I will get a kernel panic when booting up my mac("Hold power button...etc.." grey screen). To solve this i usually have to reset the PRAM a couple of times before it eventually will boot and function as normal. This error happens at least twice a week.
When finally in OS X things often works perfectly as it should, but sometimes I will get a kernel panic for no obvious reason. For instance whille doing something in Photoshop, or browsing the web in Firefox. I have also quite often experienced kernel panics when shutting down my computer!!
Over the last month or two the errors has sort of escalated. I changed my harddrive a while back, and performed a clean install of Snow Leopard on that, which didn't help. I then bougth 8GB of new RAM, and did a clean Lion install, which didn't help.
The most annying error I experience know is that I will get the spinning beach ball of death for several minutes at a time when doing real basic OS stuff. For instance I can move the cursor, click a button, get the beach ball for two minutes, with no system response other than the cursor still being able to move. After a while it catches up and I get the regular cursor back, but as soon as i click on anything it will freeze or another few minutes. Fortunatley this problems has not occured that often, but every now and again this error occurs and leave my mac unusable!
I have tried everything I can think off, and googled a lot lately. I have tried turning off SMS (as I read that my new drive could conflict with that), I have performed clean installs of the OS many times. I have bought new RAM, and tested it. I have reset the SMC. The PRAM I reset on an almost daily basis.
If anyone have any suggestions on how to solve this, if it is solvable, I will appreciate it!
Here is one error-report I got after my mac turned it self off with no warning 30 minutes ago:
Interval Since Last Panic Report: 77388 sec
Panics Since Last Report:          3
Anonymous UUID:                    15481610-C2CF-459F-85CB-A9EB4C8F63A9
Tue Sep 20 14:20:32 2011
panic(cpu 1 caller 0xffffff7f809212bf): NVRM[0/2:0:0]: Read Error 0x00000000: CFG 0x064710de 0x00100000 0x00000000, BAR0 0xe4000000 0xffffff80e9a08000 0x096380c1, D0, P2/4
Backtrace (CPU 1), Frame : Return Address
0xffffff80e853bd10 : 0xffffff8000220702
0xffffff80e853bd90 : 0xffffff7f809212bf
0xffffff80e853be20 : 0xffffff7f80a113fc
0xffffff80e853be70 : 0xffffff7f8092d02a
0xffffff80e853be90 : 0xffffff7f8090e18e
0xffffff80e853bf40 : 0xffffff7f808c823d
0xffffff80e853bf70 : 0xffffff800023dafc
0xffffff80e853bfb0 : 0xffffff8000820057
      Kernel Extensions in backtrace:
         com.apple.NVDAResman(7.0.2)[7E65ECA2-D3A1-35F8-B845-C975FB531E7E]@0xffffff7f808 c1000->0xffffff7f80b97fff
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)[95ABB490-3AB5-3D5E-9C21-67089A9AE6A1]@0xffff ff7f8083e000
            dependency: com.apple.iokit.IONDRVSupport(2.3)[E99C8907-946D-3F1A-A261-4C0F2D5D0451]@0xffff ff7f808af000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3)[897EB322-FD55-36D7-A68E-9E9C34A74A84]@0xf fffff7f80877000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11A511
Kernel version:
Darwin Kernel Version 11.0.0: Sat Jun 18 12:56:35 PDT 2011; root:xnu-1699.22.73~1/RELEASE_X86_64
Kernel UUID: 24CC17EB-30B0-3F6C-907F-1A9B2057AF78
System model name: MacBookPro5,3 (Mac-F22587C8)
System uptime in nanoseconds: 927704357221
last loaded kext at 56773708487: com.apple.driver.AppleHWSensor    1.9.4d0 (addr 0xffffff7f81d78000, size 28672)
last unloaded kext at 347020191263: com.apple.driver.AppleUSBTCKeyEventDriver    220.8 (addr 0xffffff7f81baa000, size 8192)
loaded kexts:
com.apple.driver.AppleHWSensor    1.9.4d0
com.apple.filesystems.autofs    3.0
com.apple.filesystems.ntfs    3.8
com.apple.driver.AGPM    100.12.40
com.apple.driver.AppleMikeyHIDDriver    122
com.apple.driver.AppleMikeyDriver    2.1.1f11
com.apple.driver.AppleHDA    2.1.1f11
com.apple.driver.AppleUpstreamUserClient    3.5.9
com.apple.driver.AppleMCCSControl    1.0.24
com.apple.driver.SMCMotionSensor    3.0.1d2
com.apple.driver.ACPI_SMC_PlatformPlugin    4.7.0b2
com.apple.driver.AudioAUUC    1.59
com.apple.GeForce    7.0.2
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AudioIPCDriver    1.2.0
com.apple.driver.AppleSMCLMU    2.0.1d2
com.apple.driver.AppleMuxControl    3.0.8
com.apple.driver.AppleLPC    1.5.1
com.apple.driver.AppleUSBTCButtons    220.8
com.apple.driver.AppleUSBTCKeyboard    220.8
com.apple.driver.AppleIRController    309
com.apple.driver.AppleUSBCardReader    3.0.0
com.apple.iokit.SCSITaskUserClient    3.0.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    32
com.apple.iokit.IOAHCIBlockStorage    2.0.0
com.apple.driver.AppleFWOHCI    4.8.6
com.apple.driver.AirPort.Brcm4331    500.20.6
com.apple.driver.AppleUSBHub    4.4.0
com.apple.driver.AppleAHCIPort    2.1.8
com.apple.nvenet    2.0.17
com.apple.driver.AppleUSBEHCI    4.4.0
com.apple.driver.AppleUSBOHCI    4.4.0
com.apple.driver.AppleEFINVRAM    1.5.0
com.apple.driver.AppleRTC    1.4
com.apple.driver.AppleHPET    1.6
com.apple.driver.AppleSmartBatteryManager    161.0.0
com.apple.driver.AppleACPIButtons    1.4
com.apple.driver.AppleSMBIOS    1.7
com.apple.driver.AppleACPIEC    1.4
com.apple.driver.AppleAPIC    1.5
com.apple.driver.AppleIntelCPUPowerManagementClient    166.0.0
com.apple.nke.applicationfirewall    3.0.30
com.apple.security.quarantine    1
com.apple.driver.AppleIntelCPUPowerManagement    166.0.0
com.apple.kext.triggers    1.0
com.apple.driver.DspFuncLib    2.1.1f11
com.apple.driver.AppleSMBusController    1.0.10d0
com.apple.driver.AppleSMBusPCI    1.0.10d0
com.apple.driver.IOPlatformPluginFamily    4.7.0b2
com.apple.iokit.IOFireWireIP    2.2.3
com.apple.iokit.IOSurface    80.0
com.apple.iokit.IOBluetoothSerialManager    2.5f17
com.apple.iokit.IOSerialFamily    10.0.5
com.apple.iokit.IOAudioFamily    1.8.3fc11
com.apple.kext.OSvKernDSPLib    1.3
com.apple.driver.AppleSMC    3.1.1d2
com.apple.driver.AppleHDAController    2.1.1f11
com.apple.iokit.IOHDAFamily    2.1.1f11
com.apple.driver.AppleGraphicsControl    3.0.8
com.apple.driver.AppleBacklightExpert    1.0.3
com.apple.nvidia.nv50hal    7.0.2
com.apple.NVDAResman    7.0.2
com.apple.iokit.IONDRVSupport    2.3
com.apple.iokit.IOGraphicsFamily    2.3
com.apple.driver.BroadcomUSBBluetoothHCIController    2.5f17
com.apple.driver.AppleUSBBluetoothHCIController    2.5f17
com.apple.iokit.IOBluetoothFamily    2.5f17
com.apple.driver.AppleUSBMultitouch    220.23
com.apple.iokit.IOUSBHIDDriver    4.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice    3.0.0
com.apple.iokit.IOUSBMassStorageClass    3.0.0
com.apple.driver.AppleUSBMergeNub    4.4.0
com.apple.driver.AppleUSBComposite    3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.0.0
com.apple.iokit.IOBDStorageFamily    1.6
com.apple.iokit.IODVDStorageFamily    1.6
com.apple.iokit.IOCDStorageFamily    1.7
com.apple.driver.XsanFilter    403
com.apple.iokit.IOAHCISerialATAPI    2.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily    3.0.0
com.apple.iokit.IOFireWireFamily    4.4.3
com.apple.iokit.IO80211Family    400.40
com.apple.iokit.IOUSBUserClient    4.4.0
com.apple.iokit.IOAHCIFamily    2.0.6
com.apple.iokit.IONetworkingFamily    2.0
com.apple.iokit.IOUSBFamily    4.4.0
com.apple.driver.NVSMU    2.2.9
com.apple.driver.AppleEFIRuntime    1.5.0
com.apple.iokit.IOHIDFamily    1.7.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    165
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    7
com.apple.driver.DiskImages    326
com.apple.iokit.IOStorageFamily    1.7
com.apple.driver.AppleKeyStore    28.18
com.apple.driver.AppleACPIPlatform    1.4
com.apple.iokit.IOPCIFamily    2.6.5
com.apple.iokit.IOACPIFamily    1.4

Hi, I didn'nt quite know what to name this thread, but I will try to describe the problems I have with my MacBook Pro here.
I have a mid-2009 MacBook Pro and the problems started more than a year ago. They are present under both Snow Leopard and Lion.
Every now and then I will get a kernel panic when booting up my mac("Hold power button...etc.." grey screen). To solve this i usually have to reset the PRAM a couple of times before it eventually will boot and function as normal. This error happens at least twice a week.
When finally in OS X things often works perfectly as it should, but sometimes I will get a kernel panic for no obvious reason. For instance whille doing something in Photoshop, or browsing the web in Firefox. I have also quite often experienced kernel panics when shutting down my computer!!
Over the last month or two the errors has sort of escalated. I changed my harddrive a while back, and performed a clean install of Snow Leopard on that, which didn't help. I then bougth 8GB of new RAM, and did a clean Lion install, which didn't help.
The most annying error I experience know is that I will get the spinning beach ball of death for several minutes at a time when doing real basic OS stuff. For instance I can move the cursor, click a button, get the beach ball for two minutes, with no system response other than the cursor still being able to move. After a while it catches up and I get the regular cursor back, but as soon as i click on anything it will freeze or another few minutes. Fortunatley this problems has not occured that often, but every now and again this error occurs and leave my mac unusable!
I have tried everything I can think off, and googled a lot lately. I have tried turning off SMS (as I read that my new drive could conflict with that), I have performed clean installs of the OS many times. I have bought new RAM, and tested it. I have reset the SMC. The PRAM I reset on an almost daily basis.
If anyone have any suggestions on how to solve this, if it is solvable, I will appreciate it!
Here is one error-report I got after my mac turned it self off with no warning 30 minutes ago:
Interval Since Last Panic Report: 77388 sec
Panics Since Last Report:          3
Anonymous UUID:                    15481610-C2CF-459F-85CB-A9EB4C8F63A9
Tue Sep 20 14:20:32 2011
panic(cpu 1 caller 0xffffff7f809212bf): NVRM[0/2:0:0]: Read Error 0x00000000: CFG 0x064710de 0x00100000 0x00000000, BAR0 0xe4000000 0xffffff80e9a08000 0x096380c1, D0, P2/4
Backtrace (CPU 1), Frame : Return Address
0xffffff80e853bd10 : 0xffffff8000220702
0xffffff80e853bd90 : 0xffffff7f809212bf
0xffffff80e853be20 : 0xffffff7f80a113fc
0xffffff80e853be70 : 0xffffff7f8092d02a
0xffffff80e853be90 : 0xffffff7f8090e18e
0xffffff80e853bf40 : 0xffffff7f808c823d
0xffffff80e853bf70 : 0xffffff800023dafc
0xffffff80e853bfb0 : 0xffffff8000820057
      Kernel Extensions in backtrace:
         com.apple.NVDAResman(7.0.2)[7E65ECA2-D3A1-35F8-B845-C975FB531E7E]@0xffffff7f808 c1000->0xffffff7f80b97fff
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)[95ABB490-3AB5-3D5E-9C21-67089A9AE6A1]@0xffff ff7f8083e000
            dependency: com.apple.iokit.IONDRVSupport(2.3)[E99C8907-946D-3F1A-A261-4C0F2D5D0451]@0xffff ff7f808af000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3)[897EB322-FD55-36D7-A68E-9E9C34A74A84]@0xf fffff7f80877000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11A511
Kernel version:
Darwin Kernel Version 11.0.0: Sat Jun 18 12:56:35 PDT 2011; root:xnu-1699.22.73~1/RELEASE_X86_64
Kernel UUID: 24CC17EB-30B0-3F6C-907F-1A9B2057AF78
System model name: MacBookPro5,3 (Mac-F22587C8)
System uptime in nanoseconds: 927704357221
last loaded kext at 56773708487: com.apple.driver.AppleHWSensor    1.9.4d0 (addr 0xffffff7f81d78000, size 28672)
last unloaded kext at 347020191263: com.apple.driver.AppleUSBTCKeyEventDriver    220.8 (addr 0xffffff7f81baa000, size 8192)
loaded kexts:
com.apple.driver.AppleHWSensor    1.9.4d0
com.apple.filesystems.autofs    3.0
com.apple.filesystems.ntfs    3.8
com.apple.driver.AGPM    100.12.40
com.apple.driver.AppleMikeyHIDDriver    122
com.apple.driver.AppleMikeyDriver    2.1.1f11
com.apple.driver.AppleHDA    2.1.1f11
com.apple.driver.AppleUpstreamUserClient    3.5.9
com.apple.driver.AppleMCCSControl    1.0.24
com.apple.driver.SMCMotionSensor    3.0.1d2
com.apple.driver.ACPI_SMC_PlatformPlugin    4.7.0b2
com.apple.driver.AudioAUUC    1.59
com.apple.GeForce    7.0.2
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AudioIPCDriver    1.2.0
com.apple.driver.AppleSMCLMU    2.0.1d2
com.apple.driver.AppleMuxControl    3.0.8
com.apple.driver.AppleLPC    1.5.1
com.apple.driver.AppleUSBTCButtons    220.8
com.apple.driver.AppleUSBTCKeyboard    220.8
com.apple.driver.AppleIRController    309
com.apple.driver.AppleUSBCardReader    3.0.0
com.apple.iokit.SCSITaskUserClient    3.0.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    32
com.apple.iokit.IOAHCIBlockStorage    2.0.0
com.apple.driver.AppleFWOHCI    4.8.6
com.apple.driver.AirPort.Brcm4331    500.20.6
com.apple.driver.AppleUSBHub    4.4.0
com.apple.driver.AppleAHCIPort    2.1.8
com.apple.nvenet    2.0.17
com.apple.driver.AppleUSBEHCI    4.4.0
com.apple.driver.AppleUSBOHCI    4.4.0
com.apple.driver.AppleEFINVRAM    1.5.0
com.apple.driver.AppleRTC    1.4
com.apple.driver.AppleHPET    1.6
com.apple.driver.AppleSmartBatteryManager    161.0.0
com.apple.driver.AppleACPIButtons    1.4
com.apple.driver.AppleSMBIOS    1.7
com.apple.driver.AppleACPIEC    1.4
com.apple.driver.AppleAPIC    1.5
com.apple.driver.AppleIntelCPUPowerManagementClient    166.0.0
com.apple.nke.applicationfirewall    3.0.30
com.apple.security.quarantine    1
com.apple.driver.AppleIntelCPUPowerManagement    166.0.0
com.apple.kext.triggers    1.0
com.apple.driver.DspFuncLib    2.1.1f11
com.apple.driver.AppleSMBusController    1.0.10d0
com.apple.driver.AppleSMBusPCI    1.0.10d0
com.apple.driver.IOPlatformPluginFamily    4.7.0b2
com.apple.iokit.IOFireWireIP    2.2.3
com.apple.iokit.IOSurface    80.0
com.apple.iokit.IOBluetoothSerialManager    2.5f17
com.apple.iokit.IOSerialFamily    10.0.5
com.apple.iokit.IOAudioFamily    1.8.3fc11
com.apple.kext.OSvKernDSPLib    1.3
com.apple.driver.AppleSMC    3.1.1d2
com.apple.driver.AppleHDAController    2.1.1f11
com.apple.iokit.IOHDAFamily    2.1.1f11
com.apple.driver.AppleGraphicsControl    3.0.8
com.apple.driver.AppleBacklightExpert    1.0.3
com.apple.nvidia.nv50hal    7.0.2
com.apple.NVDAResman    7.0.2
com.apple.iokit.IONDRVSupport    2.3
com.apple.iokit.IOGraphicsFamily    2.3
com.apple.driver.BroadcomUSBBluetoothHCIController    2.5f17
com.apple.driver.AppleUSBBluetoothHCIController    2.5f17
com.apple.iokit.IOBluetoothFamily    2.5f17
com.apple.driver.AppleUSBMultitouch    220.23
com.apple.iokit.IOUSBHIDDriver    4.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice    3.0.0
com.apple.iokit.IOUSBMassStorageClass    3.0.0
com.apple.driver.AppleUSBMergeNub    4.4.0
com.apple.driver.AppleUSBComposite    3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.0.0
com.apple.iokit.IOBDStorageFamily    1.6
com.apple.iokit.IODVDStorageFamily    1.6
com.apple.iokit.IOCDStorageFamily    1.7
com.apple.driver.XsanFilter    403
com.apple.iokit.IOAHCISerialATAPI    2.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily    3.0.0
com.apple.iokit.IOFireWireFamily    4.4.3
com.apple.iokit.IO80211Family    400.40
com.apple.iokit.IOUSBUserClient    4.4.0
com.apple.iokit.IOAHCIFamily    2.0.6
com.apple.iokit.IONetworkingFamily    2.0
com.apple.iokit.IOUSBFamily    4.4.0
com.apple.driver.NVSMU    2.2.9
com.apple.driver.AppleEFIRuntime    1.5.0
com.apple.iokit.IOHIDFamily    1.7.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    165
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    7
com.apple.driver.DiskImages    326
com.apple.iokit.IOStorageFamily    1.7
com.apple.driver.AppleKeyStore    28.18
com.apple.driver.AppleACPIPlatform    1.4
com.apple.iokit.IOPCIFamily    2.6.5
com.apple.iokit.IOACPIFamily    1.4

I would like to use removable hard disk drive (portable hard disk) for iphone because of many data, report and so on. I want to receive data for e-mail, so the iphone holds large amounts of data for a long time, and i want to use its at any time

nowadays, people use removable hard disk drive (portable hard disk) & usb flash drive at computer because of usability, easy to carry around.
so, i would like to use these functions for iphone. i want to develop mini portable hard disk for the use of iphone like computer

Not a feature of iphone.

HT203176 My computer gets bogged down in disk utility "gathering disk information." I can't get past this to reach the first aid tab. The little icon just keeps going round and round. Any advice would be much appreciated. Thanks.

My Mac crashed today for the first time in the seven years I have owned it. I was working in Photoshop. It had been getting slower and slower in Photoshop. Now I can't start the computer at all. Using the Installer CD, I can't get through to use the Disk Utility to try to fix it. The computer gets bogged down in disk utility "gathering disk information." I can't get past this to reach the first aid tab. The little icon just keeps going round and round. Any advice would be much appreciated. Thanks.

You may have had a hard drive failure. Have you been hearing any unusual sounds? Have you been getting messages about a full hard drive?
Will it boot in Safe Mode? See What is Safe Boot, Safe Mode? (Mac OS X)
http://docs.info.apple.com/article.html?artnum=107392 Takes a while to run, but it usually "fixes" problems.
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://docs.info.apple.com/article.html?artnum=106214
 Cheers, Tom

After upgrading to Mavericks, the free space on my SSD keeps going down for no apparent reason

I downloaded Mavericks and installed it on my macbookpro ( with Crucial M4 SSD) and the free space on my ssd keeps going down for no reason. I reinstalled it from a bootable flashdrive, and the free space went from 20G to 60. Since then it keeps going down and I am now on 48G. I cannot find the source of the drain. Anyone else with the same problem?

http://reviews.cnet.com/8301-13727_7-20025542-263.html
I have not tested the solution suggested in the article linked above.
But hope it helps.

My track pad keeps getting disconnected. A reconnect only works a short time. Disconnecting the batteries works for a longer time. What is going on?

My track pad keeps getting disconnected. Reconnecting works for only a short time. Disconnecting the batteries works for a longer time. What is going on?

Odd thing about batteries, tombird, whenever you turn off the mouse or trackpad or disconnect it, the battery % reading on the monitor rises. Sometimes even if you do it for just a few minutes. I would say your situation is normal.
BTW, rechargeables appear to be more susceptible to this than regular batteries.
If Barry's suggestion doesn't help (it should do), switch off, thoroughly clean out the battery compartment and the contacts, put in a pair of new, good quality batteries (Apple, Duracell or Energiser) and try again.

How do I stop the spinning ball that keeps going and going and going

How do I stop the spinning ball that keeps going and going and going. I think I have to remove cookies, but I don't know how.

I think I solved it.
I searched my extensions folder (in my profile) for all image files (PNG and JPG), and found the pop-up images to be in an extension folder related to Firefox Sync (not an external extension, actually). But even though I had already disabled it and un-linked this computer from Firefox Sync, the message still popped-up.
I think the image filename was SYNC.PNG, or something like that. Close Firefox, find the folder where that image is in, and rename the main folder (the one right under the extensions folder) to some other name (such as "original name_copy"). Then start Firefox. Check if it works OK and if the pop-up ceases to appear. If everything OK, then you can delete that folder.
If something goes wrong, just rename the folder to what it was before.

HT1904 when accepting the terms and conditions for the new terms of agreement of the policy, i press accept the terms and press agree and it will not allow me to purchase the music because it keeps going to the same page of terms and agreements

when accepting the terms and conditions for the new terms of agreement of the policy, i press accept the terms and press agree and it will not allow me to purchase the music because it keeps going to the same page of terms and agreements

If you can't scroll to the bottom
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.

I turned off my fire vault by accident and is there a way to stop it from decrypting cause that is going to take a long time and i want to keep my hard drive encrypted

I turned off my fire vault by accident and is there a way to stop it from decrypting cause that is going to take a long time and i want to keep my hard drive encrypted.
is there a way to stop it in the middle so it does not go through the whole process

It's called, "FileVault." If there is no option to stop the process, then the best bet would be to wait until decrypting is finished. Otherwise you run the risk of borking the whole thing. It's hard to imagine how you can accidentally turn off FileVault.

Firefox keeps my history for too long. how can i change the setting to 2 weeks

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/903677]]</blockquote>
firefox keeps my history for too long. how can i change the setting to 2 weeks

Do you mean you have a Macbook Pro (laptop) versus a Mac Pro (desktop)?
You can back up the MBP, restart using Command+R to boot into the Mavericks Recovery HD, erase the Mactintosh HD and Reinstall OS X. Then you can go through setup and configure it with your information and Apple ID. Mavericks should not prompt you for an Apple ID when it goes through the install since that OS is free.
One thing you might want to consider is asking the previous owner to unregister the MBP from his Apple ID if he previously registered it. Then you can register it under your Apple ID.
The previous owner should have wiped it clean and reinstalled the OS that came pre-installed before selling it.

Exporting photos for UHDTV or Native 4K TV, what are the best settings ? (File: Quality File: Color Space, Image Sizing and resolution) Or in other words; How can I get the smallest files but keep good quality for display on new UHDTV

Exporting photos for UHDTV or Native 4K TV, what are the best settings ? (File: Quality File: Color Space, Image Sizing and resolution) Or in other words; How can I get the smallest files but keep good quality for display on new UHDTV

You're welcome, and thank you for the reply.
2) Yesterday I made the subclips with the In-Out Points and Command-U, the benefit is that I've seen the clip before naming it. Now I'm using markers, it's benefit is that I can write comment and (the later) clip name at once, the drawback is that I have to view to the next shot's beginning before knowing what the shot contains.
But now I found out that I can reconnect my clips independently to the format I converted the master clip to. I reconnected the media to the original AVI file and it worked, too! The more I work with, the more I'm sold on it... - although it doesn't seem to be able to read and use the date information within the DV AVI.
1) Ok, I tried something similar within FCE. Just worked, but the file size still remains. Which codec settings should I use? Is the export to DV in MOV with a quality of 75% acceptable for both file size and quality? Or would be encoding as H.264 with best quality an option for archiving, knowing that I have to convert it back to DV if I (maybe) wan't to use it for editing later? Or anything else?
Thank's in advance again,
André

HT1338 the round multicolour circule keeps going round for a long time

Similar Messages

Maybe you are looking for