HT1338 The sound on my lap top is off and it is not muted. any ideas?
The audio on my lap top is off for no apprent (muted) reason. Any ideas?
Have you tried the usual..
Mac OS X: Starting up in Safe Mode
http://support.apple.com/kb/HT1455
Resetting your Mac's PRAM and NVRAM
http://support.apple.com/kb/HT1379
Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Similar Messages
-
when using the Cyclops speed camera app the sound on my iPhone 4s switches off after a short while. If I close the app and reopen it, there's still no sound. If I restar the phone and open Cyclops I get sound "welcome to Cyclops" or whatever the greeting is. Has anyone got any ideas?
I've taken several Express devices apart in the past to experiment with them. The internal components warm up quite a bit in the first 10-15 seconds. They continue to heat up after this. It takes 3-4 minutes or so before the heat transfers to the outer case for dissipation.
Nothing is certain, but I'm 95% sure that this is your issue. But, trying to find a microscopic break in a circuit board trace is, as I mentioned, a real longshot. If you have the time and have done things like this before, it might be worth a shot.
I guess the bottom line is that even if this is not the issue, the device will still need to be replaced since Apple does not offer repairs. There are no software or firmware fixes for somthing like this. -
I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem? I've copied the logs that I found for each kernel panic that still have the message logged. Please help if you can, I have read some of the other comments and perhaps it has something to do with my anti-virus software being on at start up. I have copied the log here. Any advice will be welcome.
Interval Since Last Panic Report: 665204 sec
Panics Since Last Report: 8
Anonymous UUID: D6DCC90D-A5CA-4BBE-A435-3E64A512A51B
Sat May 26 07:23:05 2012
panic(cpu 3 caller 0xffffff80002b4f36): trying to interlock destroyed mutex (0xffffff801a489be0)
Backtrace (CPU 3), Frame : Return Address
0xffffff8160313b00 : 0xffffff8000220792
0xffffff8160313b80 : 0xffffff80002b4f36
0xffffff8160313b90 : 0xffffff8000227e68
0xffffff8160313bd0 : 0xffffff7f80d14250
0xffffff8160313c20 : 0xffffff7f80d14f73
0xffffff8160313cc0 : 0xffffff800059a237
0xffffff8160313d00 : 0xffffff8000586cbf
0xffffff8160313d20 : 0xffffff800057e6e3
0xffffff8160313df0 : 0xffffff800057ed06
0xffffff8160313e20 : 0xffffff8000583c52
0xffffff8160313e70 : 0xffffff8000583d05
0xffffff8160313e90 : 0xffffff80005358b4
0xffffff8160313ef0 : 0xffffff80005367c3
0xffffff8160313f30 : 0xffffff8000536897
0xffffff8160313f60 : 0xffffff80005ccfe8
0xffffff8160313fb0 : 0xffffff80002da5e9
Kernel Extensions in backtrace:
com.intego.iokit.VBX6NKE(1.0)[211D5E46-3E43-C5DC-9C6A-8C3FFF0F4493]@0xffffff7f8 0d11000->0xffffff7f80d1bfff
dependency: com.apple.iokit.IONetworkingFamily(2.1)[2FCC16E1-34AB-3908-98BD-CCBFA56FFDCE]@0 xffffff7f809b7000
BSD process name corresponding to current thread: iStatLocalDaemon
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: iMac11,2 (Mac-F2238AC8)
System uptime in nanoseconds: 69777074610
last loaded kext at 58265763561: com.intego.iokit.VBX6NKE 1 (addr 0xffffff7f80d11000, size 45056)
loaded kexts:
com.intego.iokit.VBX6NKE 1
com.intego.iokit.BehavioralKext 1
com.intego.kext.VirusBarrier.AppBarrierKPI 10.6.8
com.intego.kext.VirusBarrierKPI 10.6.8
com.globaldelight.driver.BoomDevice 1.1
com.huawei.driver.HuaweiDataCardACMData 4.2
Model: iMac11,2, BootROM IM112.0057.B01, 2 processors, Intel Core i3, 3.2 GHz, 12 GB, SMC 1.64f5
Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.64.8-P2P
Bluetooth: Version 4.0.5f11, 2 service, 18 devices, 1 incoming serial ports
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0606, 0xfa140000 / 5
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0606, 0xfa141000 / 9
USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfa141100 / 8
USB Device: CanoScan, 0x04a9 (Canon Inc.), 0x1904, 0xfa141200 / 6
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: HUAWEI Mobile, 0x12d1 (Huawei Technologies Co., Ltd.), 0x1001, 0xfd130000 / 5
USB Device: My Passport 070A, 0x1058 (Western Digital Technologies, Inc.), 0x070a, 0xfd140000 / 6
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3Immediate suspects are the additions you added to you rsystem that installed kexts (drivers). From above,
com.intego.iokit.VBX6NKE 1
com.intego.iokit.BehavioralKext 1
com.intego.kext.VirusBarrier.AppBarrierKPI 10.6.8
com.intego.kext.VirusBarrierKPI 10.6.8
com.globaldelight.driver.BoomDevice 1.1
com.huawei.driver.HuaweiDataCardACMData 4.2
Two experiments you can try.
1. Boot in safe mode and see if you can shut down normally. All thise additions won't be running in safe mode so this test would indicate it is one of them causing the problem.
2. Uninstall all the intego VirusBarrier stuff. That's my first guess and the troublemaker. -
I keep getting the message sync complete but my ipod nano 3rd generation is not syncing, any ideas. I have used 3 different cables, reinstalled itunes to the latest version. My nano shows in the side bar of i tunes
There are instructions for starting it on this page : http://support.apple.com/kb/TS1567
-
TS3274 The sound effect window is stuck on screen and volumn button not working
I have the Sound effect window stuck on my screen and the volumn butoon wont work.
Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.
-
The air port on my imac went off and i can not get it to work
my air port on the imac weny off and i can not get it to work now
Apple used to use airport name for everything.. is this the internal wireless card?? Or external airport router?
If it is the internal wireless card, is it still listed in system profile.. and do a hardware test with your original CD.
See http://support.apple.com/kb/ht1509
The problems with Mavericks are very great.. if you upgrade installed anything can happen.. a common feature is the internal wireless card fails to work.
Give details and we can figure it out.
Here is discussion about the same thing as I think has happened to your imac in macbook.
https://discussions.apple.com/thread/5219345?tstart=30 -
i updated my iphone 4s to the new ios 6.1.3 after installing it the device displayed itunes with a USB symbol and cannot come up. please any ideas
Do as the diagram indicates: Connect your iPhone to your computer. Open iTunes on the computer and restore your device.
-
Have installed icloud on my lap top but it wont open, password is correct any ideas please
I have installed icloud on my laptop but canmt open ot to use it. Any ideas please. password is correst. thanks, bulleddie.
Hey mistib,
Thanks for the question. After reviewing your post, it sounds like you want to update to the latest version of iTunes. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iTunes: How to install the latest version
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
The time will stay correct for an hour or so, then jump backwards for no reason. I have tried setting the time manually and automatically and still get the same problem, and have tried with wifi on and off and it still does it. All my software is up to date and tried contacting EE who said to ask Apple. Phone is about 11 months old and have had no previous problems.
Hi jennehbear,
Thank you for using Apple Support Communities.
Your time jumping backwards an hour sounds like an issue with the time zone. Take a look at this article to troubleshoot the issue.
iOS: Troubleshooting issues with date and time - Apple Support
Regards,
Jeff D. -
I've had my ipad for almost a year and I use Face Time every day. It's been working perfectly all the time but now I've upgaded to the new ios6 it keeps cutting the conversation off and we have to reconnect. Anyone got any ideas?
Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
maybe this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar -
When I go to sync my iphone 3gs itunes alerts me that an update is available. I check to download an update. I then receive an error message stating that I am not connected to the internet. I am 100% positive that I am connected and before this download I was instructed to update itunes which I did without any problems and restarted my computer. I have tried all of the troubleshooting suggestions. I have no problem syncing or using the itunes store. I just can't get the update. I also have no problems with my iphone connecting to a wireless internet connection. Please Help!!!!!!
http://support.apple.com/kb/TS3694
http://support.apple.com/kb/TS3125
http://support.microsoft.com/kb/299357 -
Help my iphone is frozen in a screen with iphone logo and usb cable. Happened while I was updatting.
plug it in youre computer and hold the power button and the home button for 30 seconds and then it should have a blck sctreen then press the on button for 15 seconds and an apple logo shoul appear. please answer my problem.
-
the night be for the time was also off.
I tried to do this at least 4 times! the iTunes is running the restore but at the end he's failed.. he say there is an error ! I think number -1.
-
Please help. Downloaded ios 8 on the iphone 4s and the wifi button is GREYED. Tried to resetting the Phone without losing data and losing data but wiyhout success. Does anybody know how get the wifi working again, please as I have a very disgruntled daughter. I believe it could be down to a battery issue, over heating? Is there a solution?
Thank You for reading and a response to sort it would be much appreciated.What was the full wording of the error message? Usually there is also a number or additional information.
Try placing the iPod in Recovery Mode and then restore
Next try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I cannot find a contact for support to have my email changed and a new password registered
ITunes will not let me purchase. It does not recognize my ID and Password
Maybe you are looking for
-
IPod Shuffle 2G Won't Function
So when I plug my iPod shuffle into my computer, I see it pop up in the My Computer, everything is fine. I open iTunes, the My Computer iPod disappears, but everything is fine on iTunes. I go to add new songs and it tells me that it needs to erase ev
-
Configuring TLS support in a clustered environment
Hi folks ! I couldn't find a definitive guide to TLS support in a clustered environment... So I'll give it a shout :) Has anyone managed to configure TLS support in his/her cluster ? My setup is as follows : - we have two Ironports, clustered, who ar
-
Create report with Assembly BOM component
Hi, I have a customer who uses Assembly BOM in his delivery and invoice. In this assembly BOM are some component that they want to see in an report. But in the deliverie you don't see the component items in the line Is there somebody who can tell me
-
Problem in server installation
I am new to OMA-DM and I am trying to install dm-server on my windows 7 system. I have downloaded Funambol 3.5.2 version of dm-server. JBOSS 5.1.0.GA and postgresql are already installed on my system and J2EE_HOME and JAVA_HOME path variables are cor
-
How do I email a photo? I have tried and I go through the process and then a screen comes up asking for a email address and a sender verification code and I don't what there looking for.