HT1338 Tried to install update to Mountain Lion and get this message: OSXUpdCombo 10-1.8 image data corrupted.
Tried to install update to Mountain Lion and get this message: OSXUpdCombo 10-1.8 image data corrupted.
Try booting into the Safe Mode. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart. For each disable/delete, you will need to restart if you don't do them all at once. You can download from the Safe Mode.
Safe Mode
Safe Mode - About
Similar Messages
-
When updating to Mountain Lion I get this measage
This disk has S.M.A.R.T. errors. This disk has hardware problem that can’t be repaired. Back up as much data as possible and replace the disk.
never had this before download of Mountain Lion.As others have stated, this is a potentially catastrophic event. Consider yourself lucky, as hard drives usually just fail wihtout warning. Your disk could die at any time. This is a mechanical / physical failure, not software related.
Going forward, I would suggest utilizing a utility that monitors SMART status, which you obviously don't have, such as SpeedTools. -
Hello,
I am reading your thread here and I am having problems reinstalling CS3 after I did a migration from old iMac to new iMac (which rendered the installed CS3 unusable). I have "required resources are missing" error message when trying to reinstall from purchased CD. Please suggest how to help. thanks,Cyntlee33 the simplest option is to restore your new computer back to a clean install of Mac OS 10.7. Then use the migration assistant again to move over only documents and settings.
Your other option, which might end up expending a lot of additional time if it fails, would be to try using the CS5 cleaner tool to attempt to remove the files which were transferred over by the migration assistant.
I would highly recommend the first option. During my time with support some of the most difficult issues I have dealt with were from users who used some type of migration utility and then their software did not perform properly on the new computer. -
Still unable to download Mountain Lion, always get this message "Could not complete your purchase, Unable to verify file distribution. It may be damaged or unsigned." !!! Do you have an idea about what's going on ?
Try starting up in Safe Mode..http://support.apple.com/kb/HT1455
Try the App store again. -
updated my mac to mountain lion 10.7.8.3 and now my app store, mail or facetime won't open. Also, I am not longer able to play videos through firefox. I tried downloading the combo for mountain lion and it refuses to install saying that I need to see developer. Whenever I try to open my appstore, mail or facetime it says that the programmes need to be installed and might not be compatible with this version of mac operating system. Can anyone help me?
It's not a bad install of Mountain Lion. I've had the same thing happen to me, but it affected not only Mail, but a variety of other programs including iPhoto and MS Office, where I had to delete preferences, caches, and reinstall the OS as well as the program itself. I'm still having issues with Mail, so I've gone to another program.
Everything was fine upon the initial install. I restarted my iMac about two weeks after the install, and that's when the issues began to happen. I've reinstalled Mountain Lion twice, but the same issues arise.
As I mentioned above, you'll need to figure out which preferences are causing the issue, then reinstall the program, as a fresh reinstallation will do you no good unless you wipe the drive completely.
Here's a thread that helped me with iPhoto:
https://discussions.apple.com/thread/4794375?start=0&tstart=0 -
Hi all , i tried to install os x mountain lion i could not it said ( There was an error in the App Store. Please try again later. (100) ... now tow weeks
Hello, might be good luck on your part!
Anyway...
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there to Repair the Disk. -
I am trying re-install OS X Mountain Lion, but it is not locating my Apple HD
I am trying re-install OS X Mountain Lion, but it is not locating my Apple HD, once click on agree, which HD do want to install, its is not show the HD at all ?
Is it a 15"?
If so, see this article: http://support.apple.com/kb/TS4088
Print it out and take it and your Mac to an Apple store or a authorized service center. You may have a logic board problem, which probably has nothing to do with the current problem. -
I have tried to install OS X Mountain Lion on a Macbook 2009 and it has gone past its install time into the minus time.do this twice it wont install
Help
Thanks GuysNegative numbers on the installation progress bar can happen. Just let the installer end.
Those negative numbers do not mean something is really going wrong. -
Updated to Mountain Lion and now I get a Green Flicker
Help Please...
I updated to Mountain Lion and ever since then when I export media from Final Cut X I am getting random green flashes in my video clips. I shoot with a DSLR (60D), full 1920x1080 HD, H.264 codec. I have never had this problem before. I thought at first it might be the camera so I pulled out a different DSLR (rebel t2i) and it was having the same issues once exported. The only thing that has changed is that I installed OSX Mountain Lion. Any one else had this problem? It appears there are no updates available for my computer. I am on a mid 2011 27 inch iMac. Any help would be greatly appreciated.I am using magic bullet looks 2.0 as well. From my experience so far it hasn't made a difference whether I actually applied the effect or not. I am still testing to make sure but I think the green flicker has happened on clips both with magic bullet applied and ones not applied.
Jake -
I updated to mountain lion and now mail cannot connect to my server
I updated to mountain lion and now mail cannot connect to my server. It says check your user name and password are correct. Well they are, and were. Nothing has changed except the mac OS.
Has anyone else suffered this and knows a way around it? Too annoying to log into my mail every 15mins via a web page anymore.
Efforts tried to resolve this so far:
retyped user name and password, removed account and created a new account, restarted computer, software update, searched forums. so far all have proved unsuccessful.
I have also written to my mail provider and am waiting for feed back from them, but if anyone has any advice it would be gratefully received.
Many thanks,
MikeMany users upgrading to Mountain Lion have run into this problem, myself included. You likely have corrupted settings for your "Outgoing Mail Server (SMTP)" for each of the failed Accounts. Open Mail>go to Mail's Preferences>Accounts>select an Account in the left column to work on>then set up your Outgoing Mail Server which will INCLUDE resetting up your Password, as its asking you to. Click on "SMTP Outgoing Mail Server" near the bottom of the Accounts window while your mail account is highlighted in the left hand column. When you click on SMTP... you will see a drop down box icon offered at the right side of the line. Click it and then select at the bottom of the the list "Edit SMTP Mail Server". Fill in the required settings for your ISP mail account using their recommended settings.
-
I've updated to Mountain Lion and now when I download a purchased program nothing happens (it jumps to download but the download will not open?)?
Hi, Thanks for responding. Most downloads you can double click and/or drag over to applications for it to actually install however this one you can't. It just acts like an empty folder and does nothing. I did update to Mountain Lion recently and wondered if it was incompatible or something or if I was doing anything wrong? Thanks.
-
I have a samsung scx 4100 series and i just updated to mountain lion and now i keep getting a "filter failed" error, anyone have any suggestions as to how to fix it.
Hi again, when you clicked on Mountain Lion and Lion in the App Store you are telling the laptop to reinstall them both.
You may have allowed simutanious downloads checked at the bottom of the window, I don't know, but I expect Mountain Lion is downloading, so Lion is waiting for it to finish, so if you have Mountain Lion installed cancel both download's.
Cancell both downloads anyway.
Go to the apple logo , top left, click on it, then click on about this mac, a window will open telling you what's installed, Mountain Lion is OX 10 version 10.8.2 click on more info, to find out more, Lion will be OX10 version 10.7.4.
Only update were it say's check for updates, not download now. -
I updated to Mountain Lion and now my Parallels application no longer works; please help! What to do???
Make sure you have the latest version of parrallels. Think older versions are not compatible.
-
Hi, I have a mac book pro running mavericks and recently tried to connect to a 3rd gen apple tv but the airplay icon is not showing up in the top bar. I then tried my girlfriends laptop running mountain lion and it showed up straight away. Any suggestions?
How old is the MacBook Pro? AirPlay is only supported on 2011 and newer models, due to the requirements it has in hardware for graphics acceleration.
-
I just bought my mac book pro and updated to mountain lion and I don't know why it is taking around 1minutes and 10sec to boot up,does anybody have any idea? and also how can I make my laptop boot up faster?thank you in advance
Call Apple Care.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired.
Maybe you are looking for
-
Firefox won't open...I get the time out window...but Internet Explorer works.
Firefox is my browser of choice, but it wouldn't open when I went to start up the wireless at home. After 2 days of trying to figure out why, I finally opened up IE...which works. I'm thinking of unintalling & then reinstalling FF...but thought there
-
Not able to start Managed server using nohup command and failed to authenticate weblogic user
Hi, I stopped weblogic Admin server, managed server and opmnctl. and restarted Admin server successfully but I'm able to start managed start without nohup command. if I use nohup command then it's not able to get authenticate and faild to start manag
-
Way to count commits and updates in a procedure
Gday, I want to trace a procedure at runtime to see how many updates and commits are being made when it runs. What is the best way to accomplish this? Cheers
-
BW and CRM - Interactive Centre
Hi All - I'm currently working on an SAP and CRM implementaton project and am new to CRM. I couldn't find any useful information in this regards. If any have worked in this module, please provide me some information and help. Thanks. Points will be a
-
Could anyone clear my Doubts in Oracle Discrete Manufacturing
Hi Gurus, Below are my doubts hope u understand.. 1) Difference between Phantom Item and Sub Assembly Item? 2) For ATO Model Fulfillment steps are :- a) create SO for ATO Item b) Shedule and Book the SO c) Launch Auto create Configuration Items d) La