HT1338 Trying to Upgrade Mac OS X 10.5.6 and am having some issues. Help. Please...

Hello All,
I used to used my personal computer at work on their wifi for an general system update and I am trying to update my software at home. The error message is as follows:
The file “index.sucatalog” couldn’t be found on the server “macsus.gene.com”.
How can I change the settings to upgrade at home? And yes, I need a step by step bc other than checking for upgrades I am useless

Thank Niel,
So this is how lame I am. I can of course get to the Utilities folder. But there are a ton of folders in there, where and how do I type in the:
defaults delete /Library/Preferences/com.apple.SoftwareUpdate CatalogURL
Thank You,
Marissa

Similar Messages

I am trying to upgrade a Macbook Pro that I was given to Snow Leopard. Help please?!

I am trying to upgrade a Macbook Pro that I was given to Snow Leopard. While doing so, it froze up at 29 minutes left. I am now getting the white screen with the flashing folder. I don't need to save anything that is/was on it, I just need it running again.

Installing or updating Snow Leopard:
http://manuals.info.apple.com/en_US/Snow_Leopard_Installation_Instructions.pdf

I am trying to upgrade Mac OSX from 10.7.4 10 .7.5 .But, the grey screen is coming for hours. What should i do?

i am trying to upgrade Mac OSX from 10.7.4 10 .7.5 .But, the grey screen is coming for hours. I pressed the alt key and was taken to options viz. Restart to install MAC again, use time machine. I don't have back-up and so restarted to install MAC again. Can i cancel this now. I want my data to be secure. What should i do?

If you cancel an install there's no telling what state it will leave your Mac in. Let it finish or fail.
Then get a disk, it can even be a pocket drive if it's large enough and back up all your own data.
After that, boot up holding command-r keys into your Recovery Volume.
The screen should give you these choices...
Restore from TM backup
Reinstall Mac OS X
Get help online
Disk Utility
First run Disk Utility Repair Disk, if you get errors run until no errors reported or reports "the disk cannot be fixed". Then, choose Reinstall OS X.

Recently upgraded Mac 24" to Lion (clean install) and now no external hard disks work with Time Machine

Recently upgraded Mac 24" to Lion (clean install) and now no external hard disks work with Time Machine.
installed new internal disk first with fresh 10.7.3 Lion software. Also upgrade ram to 4GB. Work great, super fast.
BUT.... my WD 1TB firewire400 external disks no longer work with the Lion enabled machine now.
FURTHER... I read somewhere that WD is problematic with Lion but Seagate was not... so I went and bought a new 3TB Seagate GoFlex.
When it didnt work properly either, I patiently searched and found a software/firward upgrade and applied.
I re-partitioned disk to extened/journaled standard, etc.
Then assigned the particition to Time Machine. Drive turned the blue/grey color, so I thought it would work.
But, it has now been in "preparing" mode in Time Machine for HOURS....
What is up Apple? So dissappointed. Ive read these type of problems are notorious with Lion and I wish I never upgraded.
Are you trying to make issues with External disks, to drive people to iCloud? That trick ont work in me. I will not reward bad behaviour Apple.
Please provide a fix... I wasted hours/days screwing around with this, instead of using the Mac for what its intended!

Solved by Pondini, on another thread I opened...
Answer:
Sounds like either:
A directory problem on your internal HD. Verify your internal HD, and Repair any other volumes being backed-up per #A5 in Time Machine - Troubleshooting.
Something in OSX may be damaged. You've tried the "combo," so a fresh copy of OSX (that won't disturb anything else) would be worth a try (and you don't need a tech for that). See Installing the ''combo'' update and/or Reinstalling OSX.

Tried to upgrade my iPhone 4 to 5.1 and now it is stuck in "plug into itunes mode" after trying to update to iOs 5.1 and receiving error (1).

Tried to upgrade my iPhone 4 to 5.1 and now it is stuck in "plug into itunes mode" but will not recover when I plug it in. It is coming up as "unkown error (1)". Is there anything I can do?
Also, is there any way to recover pictures I have not yet backed up? They should be on iTunes, but do not show up when I plug the phone in or otherwise.
Is there any hope in saving this phone or is my best bet contacting Verizon or Apple to overnight me a new one?

From iPhoneWiki:
Try changing the USB port (the back one of chassis is better) and restart computer.
The installed version of iTunes may also be too old. Update iTunes.
Also put your iPhone in DFU mode when doing the above and restore. It's a software error.

Am trying to upgrade iPad 2 to 6.1.2 and it shows error like "Unable to verify Update" you are no longer connected to the internet. But am connect to my wi-fi. Can somebody throw some light on this.

Am trying to upgrade iPad 2 to 6.1.2 and it shows error like "Unable to verify Update" you are no longer connected to the internet. But am connect to my wi-fi. Can somebody throw some light on this.
============================================================
Throws error saying
"Unable to Verify Update"
iOS 6.1.2 failed verification because you are no longer connected to the internet
============================================================
Can anybody please respond

Try this and see if it resolves the issue.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Then try again.

I can't upgrade my Mac to OS Mavericks. I still don't know the problem why. I have my mac with OS 10.8.5 and also a 2012 model . Please help me :((

I can't upgrade my Mac to OS Mavericks. I still don't know the problem why. I have my mac with OS 10.8.5 and also a 2012 model >.< Please help me :((

Oh that really works ;D Thanks

HT1577 I am trying to upgrade iPhoto to v9.4.2(4+) and the message says library needs to be upgraded and its just stuck there for 6 hours

I am trying to upgrade iphoto to v9.4.2(4+) and it has frozen trying to upgrade my large photo library

hello, it sounds like the library is damaged.
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

I am trying to upgrade to itunes 10.7 using windows and keep getting the following error message: "Error writing to file: C:\Config.Msi\364460.rbf Verify access to this dierctory". Help!

I am trying to upgrade to itunes 10.7 using windows and keep getting the following error message: "Error writing to file: C:\Config.Msi\364460.rbf Verify access to this dierctory". Help!

Fixed! (win7 64 bit)! Just stop your antivirus during the upgrade/installation (I've got Kaspersky).
Good luck!

Hello.I wanted to upgrade my iPad 1 to iOS 5.1 Over the Air.I was running iOS 5.0.1.It said it had an error connecting to server.It is already 5 hours i cant install this update.I also have an iPhone 4 with iOS 5.0.1 with the same issues.Help please!

Hello.I wanted to upgrade my iPad 1 to iOS 5.1 Over the Air.I was running iOS 5.0.1.It said it had an error connecting to server.It is already 5 hours i cant install this update.I also have an iPhone 4 with iOS 5.0.1 with the same issues.Help please!

You're probably running into the servers simply being swamped. Thousands of people are all going for the software update at the same time. Give it a try again and if that doesn't work, then try plugging it into your computer and trying it that way.
I didn't get a notion of the size, it doesn't seem to be as big as the 700 meg 5.0 update, but it did take me 20+ minutes to download via cable internet so it's a large file. That in and of itself takes a while.
If you're trying to download it directly to your iPhone, you'll need to be on wifi since I'm sure it's well over the 20 meg file size limit for 3G.

I'm trying to install a Citrix XenApp for work purposes and am having a hard time. The message "The installer has insufficient priveleges to this directory...

I'm trying to install a Citrix XenApp for work purposes and am having a hard time. The message "The installer has insufficient priveleges to this directory: C:\Program Files (x86) \Mozilla Firefox \Plugins \resource. The installation cannot continue. Log on as administrator or contact your system administrator." I am using a Toshiba Satellite laptop and am the only user and administrator as well. I have read other Firefox support articles and google answers but nothing has resolved this issue. Please help! Be detailed and visual if possible

There are no BIOS settings, because Macs don't have a BIOS. I don't use Parallels, but I assume it has simulated BIOS settings. You'd have to consult its documentation to find out how to change them.

I have 2 computers (1 Pc and 1 MAC) and 1 Iphone.The I phone is synchronised with the PC. I want to synchronised it also with my MAC, without erasing all my music and files. Someone can help me to find the answer ?

I have 2 computers (1 Pc and 1 MAC) and 1 Iphone.The I phone is synchronised with the PC. I want to synchronised it also with my MAC, without erasing all my music and files. Someone can help me to find the answer ?
i have already try the copy/paste thing with the ID of the file "iTunes Music Library.xml" it didn't change a thing. each time I relaunched Itunes, the ID is the first I have in the MAC.
I have more than 5 000 files of music. I don't want to recreate one by one all my playlits.
Many thnaks for your answers.
Constance

You can sync iphone with one and only one computer at a time. If you sync to another, it will erase the current content and replace with content form the new computer. There is no way around this.
Put everything on one computer and sync from there.
BTW, you posted in the Home Share forum. Your question seems to have nothing to do with home share.

HT1918 I'm having some issues trying to change my account billing---I have a new debit card and i need to punch in the new number but when i go to edit my info itunes says my 'session has timed out.' i've logged in and out more than once. what's the probl

i'm having some issues trying to change my account billing---I have a new debit card and i need to punch in the new number but when i go to edit my info itunes says my 'session has timed out.' i've logged in and out more than once. what's the problem?

Try to change the credit information from your iphone or other ios device. Tap on settings > store > tap Apple ID > tap view account > tap payment information > change

After updating my mac book pro to the osx yosemite.am getting some issues after starting up.a soon as it gets on the destop the screen start blinkingand i cant do anything

After updating my mac book pro to the osx yosemite.am getting some issues after starting up.as soon as it gets on the destop the screen start blinking and i cant do anything.Please help me!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

What's the best Mac to run Logic Pro 9 and above with no issues

What's the best Mac to run Logic Pro 9 and above with no issues?

Any Mac that can happily run OS X Snow Leopard 10.6.8 and Logic Pro 9.1.5.....
Note: Newer Macs cannot run Snow Leopard because SL doesn't provide hardware support for the newer hardware found in these newer Macs....
Next best combo for newer Macs is Mavericks 10.9.5 and Logic Pro 9.1.8... but it is nowhere near as efficient a combo as the previous one mentioned...

HT1338 Trying to Upgrade Mac OS X 10.5.6 and am having some issues. Help. Please...

Similar Messages

Maybe you are looking for